You connect a battery, resistor, and capacitor as in (Figure 1), where R = 17.0 Ω and C = 9.00 × 10−6 F. The switch S is closed at t = 0. When the current in the circuit has magnitude 3.00 A, the charge on the capacitor is 40.0 × 10−6 C.
A) What is the emf of the battery?
B) At what time t after the switch is closed is the charge on the capacitor equal to 40.0 × 10−6 C?
C) When the current has magnitude 3.00 A, at what rate is energy being stored in the capacitor?
D) When the current has magnitude 3.00 A, at what rate is energy being supplied by the battery?

The terrestrial planet that is tilted upside down is Uranus.

Unlike the other planets in our solar system, which have a relatively upright axis of rotation, Uranus is tilted at an extreme angle of approximately 98 degrees. This means that its axis is almost parallel to the plane of its orbit around the sun, causing it to appear to roll along its orbit like a ball.

The cause of Uranus's extreme tilt is still not fully understood, but it may be the result of a collision with a large object in the early history of the solar system.

To know more about Uranus  click on below link :

https://brainly.com/question/29582482#

#SPJ11

1. The three types of crystal structures are cubic, hexagonal, and tetragonal, 2.  A needle may float on clean water due to surface tension, and 3. Two applications of surface tension are Insect locomotion and capillary action.

1. Three types of crystal structures with two examples each are:

Cubic: NaCl (rock salt), diamond

Hexagonal: graphite, quartz

Tetragonal: zircon, tin dioxide

2. A needle may float on clean water due to surface tension. However, when detergent is added to the water, the surface tension is reduced, and the needle sinks due to the increased weight of the needle.

3. Two applications of surface tension are:

Insect locomotion: Insects such as water striders are able to walk on water due to the high surface tension of water. The insects use their weight and hydrophobic legs to create small depressions in the water surface, which increases the surface tension and allows them to stay afloat.

Capillary action: Capillary action is the ability of a liquid to flow in narrow spaces against the force of gravity. This phenomenon is due to the surface tension of the liquid, which causes it to rise in narrow tubes or porous materials. Capillary action is used in many applications, such as in wicking materials for candles, in paper chromatography for separating mixtures, and in plants for transporting water and nutrients from the roots to the leaves.

Therefore, NaCl, diamond, graphite, quartz, zircon, and tin dioxide are a few examples of the three main types of crystal structures: cubic, hexagonal, and tetragonal. Applications where liquids must flow in constrained places against the pull of gravity, such insect locomotion and capillary action, depend on surface tension. Surface tension allows a needle to float on water, but when detergent is added, it lowers surface tension and makes the needle heavier, which makes it sink.

To learn more about  Archimedes' Principle  click:

brainly.com/question/787619

#SPJ1

The acceleration due to gravity on Earth is approximately 9.8 m/s^2. Therefore, the force required to make a 1-kg puck accelerate on a friction-free air table with the same acceleration as free fall would be equal to the force of gravity acting on the puck.

F = m * a

where F is the force required, m is the mass of the puck, and a is the acceleration due to gravity.

F = 1 kg * 9.8 m/s^2

F = 9.8 N

Therefore, the horizontal force that must be applied to a 1-kg puck to make it accelerate on a horizontal friction-free air table with the same acceleration it would have if it were dropped and fell freely is 9.8 N.

Learn more about force here:

https://brainly.com/question/14110395

#SPJ11

The wavelength of the microwave is approximately 0.517 meters or 51.7 centimeters.

The wavelength of a wave can be calculated using the formula:

Wavelength = Speed of light / Frequency

The speed of light is a constant value, approximately [tex]3.0 * 10^8[/tex] meters per second.

Given the frequency of the microwave as [tex]5.8 * 10^8[/tex] hertz, we can substitute these values into the formula:

Wavelength =[tex](3.0 * 10^8 m/s) / (5.8 * 10^8 Hz)[/tex]

By simplifying the expression, we get:

Wavelength = 0.517 meters or 51.7 centimeters

Therefore, the wavelength of the microwave is approximately 0.517 meters or 51.7 centimeters.

Learn more about wavelength, here:

https://brainly.com/question/31143857

#SPJ1

To determine how long after the baseball was hit it gets caught, we need the equation that models its height in feet as a function of time. However, the equation is missing from the provided information. Without the specific equation, we cannot provide an accurate estimation of the time it takes for the ball to get caught. The equation would describe the trajectory of the baseball's height as it goes up, reaches its maximum height, and comes back down. Without this equation, it is not possible to calculate the exact time of capture.

Unfortunately, the equation that models the height of the baseball as a function of time is missing from the given information. Without the equation, we cannot determine the specific time it takes for the baseball to get caught after being hit.

The equation would typically take into account the initial upward velocity, the initial height, and the effects of gravity on the ball's trajectory. It would describe the behavior of the baseball's height over time, including its ascent, reaching the maximum height, and descending back to the height at which it gets caught.

Without the equation, we lack the necessary information to estimate the time accurately. Therefore, it is not possible to determine how long after it was hit the ball gets caught without the missing equation.

learn more about velocity here:brainly.com/question/30559316

#SPJ11

Based on the given information, the best option for this is the nut has no net charge. There will be a positive charge on the left side, and an equal negative charge on the right side.

When the left bell has a positive charge and the right bell has a negative charge, the suspended nut experiences a torque and aligns itself between the two bells. Since it doesn't experience a net force, this indicates that the nut must have an equal amount of positive charge on its left side (attracted to the right bell's negative charge) and negative charge on its right side (attracted to the left bell's positive charge), resulting in no net charge for the nut.

To clarify, net charge refers to the overall electrical charge of an object, taking into account the balance between positive and negative charges.

Complete Question

when the bells are charged up, the left bell acquires a positive charge, the right bell a negative charge. when this occurs, the nut that is suspended between the two bells experiences a torque (it lines itself up with a line between the two bells) but it doesn't experience a net force. what does this tell us about the charge on the nut? select the best answer from the choices provided.

O The nut has no net charge. There will be a positive charge on the left side, and an equal negative charge on the night side

O The nut has no net charge. There will be a negative charge on the left side, and an equal positive charge on the right side

O The nut has a net positive charge, concentrated on the right side of the nut

O The nut has a net negative charge, concentrated on the left side of the nut

To know more about Net Charge visit:

https://brainly.com/question/8233653

#SPJ11

When being radar vectored for an ILS approach, you may start a descent from your last assigned altitude to a lower minimum altitude if you have been cleared for the approach and have intercepted the glideslope.

This is usually indicated by the approach controller providing you with a descent clearance and the glideslope indication coming alive on your instrument panel. However, it is important to note that you should not descend below the minimum safe altitude until you have established visual contact with the runway environment and have been cleared for a landing by the tower. Following these procedures ensures safe and efficient approach and landing operations.
When being radar vectored for an ILS approach, you may start descending from your last assigned altitude to a lower minimum altitude once you are cleared for the approach and have established two-way communication with the air traffic controller. It's essential to follow the controller's instructions and maintain situational awareness to ensure a safe and successful approach. Remember to stay within the altitude restrictions until you receive clearance and have a proper understanding of your current position relative to the ILS approach path.

To know about radar:

https://brainly.com/question/31783853

#SPJ11

Option a, The white star being the most luminous means it is emitting the most energy, which is typically associated with being the hottest is correct. Options b, c, d, and e cannot be true based on the given information.

The color of a star is related to its temperature, with blue stars being hotter than white stars, and red stars being cooler. The size of a star cannot be determined based on its color or luminosity alone. Therefore, options b, c, d, and e cannot be true based on the given information.
This is because the luminosity of a star is directly related to its temperature. The higher the temperature, the more luminous the star will be. Since the white star is the most luminous, it must be the hottest among the three.

To know about star :

https://brainly.com/question/31987999

#SPJ11

Tsunamis are created by large, sudden movements of the ocean floor, typically caused by (b) earthquakes or underwater landslides. Therefore, the answer to the question is a. hurricanes.

The energy from these movements creates massive waves that travel through the ocean and can cause devastating damage when they reach the shore. Hurricanes, on the other hand, are large tropical storms that form over warm ocean waters and are characterized by strong winds and heavy rainfall. While hurricanes can cause significant damage to coastal areas, they do not create the same type of large-scale movements of the ocean floor that are necessary to generate a tsunami.  

To know more about earthquake visit:

https://brainly.com/question/30208403

#SPJ11

The velocity of the mass at the end of the 3.0 second interval is -22 m/s to the west.

To solve this problem, we can use the formula:

final velocity = initial velocity + acceleration x time

First, let's determine the initial velocity of the mass. We are given that the mass has a velocity of 10 m/s to the east. Since the acceleration is to the west, we need to change the sign of the velocity to account for the direction. Therefore, the initial velocity is -10 m/s.

Next, we can plug in the given values into the formula and solve for the final velocity:

final velocity = -10 m/s + (-4.0 m/s^2 x 3.0 s)
final velocity = -10 m/s - 12 m/s
final velocity = -22 m/s

Therefore, the velocity of the mass at the end of the 3.0 second interval is -22 m/s to the west.

Note that the negative sign indicates that the velocity is in the opposite direction of the initial velocity.

To know more about velocity visit:-

https://brainly.com/question/30559316

#SPJ11

The force constant of the spring is 10333.33 N/m.(a) To find the force constant of the spring, we can use Hooke's law which states that the force applied to a spring is proportional to its extension or compression.

In this case, we know that the spring is compressed by 1.50 cm when a 155 kg person stands on it. Therefore, we can calculate the force exerted on the spring by the person using F = kx, where F is the force, k is the force constant, and x is the compression distance. Plugging in the values, we get:

155g = k(0.015m)

Solving for k, we get k = 10333.33 N/m.

Therefore, the force constant of the spring is 10333.33 N/m.

(b) In this case, we need to find the compression distance of the spring when a 92.0 kg person stands on it in an elevator that is accelerating upward at 1.25 m/s2. The force exerted on the spring by the person can be calculated using F = mg, where m is the mass and g is the acceleration due to gravity (9.81 m/s2). Thus, the force exerted on the spring is:

F = 92.0g = 902.52 N

To find the compression distance, we can use the formula x = F/k, where x is the compression distance and k is the force constant we found in part (a). Plugging in the values, we get:

x = 902.52/10333.33 = 0.0872 m = 8.72 mm

Therefore, the spring would be compressed by 8.72 mm when a 92.0 kg person stands on it in an elevator that is accelerating upward at 1.25 m/s2.

To know about force :

https://brainly.com/question/30507236

#SPJ11

The experiment is being returned to its original configuration after each alteration, the only viable option is to increase the width of the slit, as this would cause the diffraction minima to appear at smaller angles.

The diffraction of light through a single slit results in a pattern of bright and dark fringes, with the first minimum occurring at an angle given by sinθ = λ/d, where λ is the wavelength of the light and d is the width of the slit. To decrease the angles at which the diffraction minima appear, the width of the slit needs to be increased, as sinθ is inversely proportional to d. Therefore, one alteration that would decrease the angles at which the diffraction minima appear would be to increase the width of the slit. Another alteration that could achieve this would be to decrease the wavelength of the light used in the experiment, as sinθ is directly proportional to λ. However, since the experiment is being returned to its original configuration after each alteration, the only viable option is to increase the width of the slit, as this would cause the diffraction minima to appear at smaller angles.

To know more about diffraction visit:
https://brainly.com/question/12290582
#SPJ11

In a d'Arsonval meter movement with a full-scale current value of 100 μA and a resistance of 5k, the size resistor must be placed in series with this meter is 45.5KΩ

To calculate the size of the resistor needed in series with the meter movement, we need to determine the voltage drop across the meter movement at full scale deflection.

We can use Ohm's Law to calculate the voltage drop:

V = IR

where V is the voltage drop, I is the current, and R is the resistance of the meter movement.

At full scale deflection, I = 100 μA and R = 5kΩ, so:

V = (100 μA) * (5kΩ) = 0.5V

To ensure that the meter movement is not damaged and that the current through it remains at or below the full-scale value, we need to limit the current through the meter movement by adding a resistor in series with it.

Let's assume we want the meter to have a full-scale deflection when a voltage of 5V is applied across the entire circuit (meter movement + series resistor).

To calculate the value of the series resistor needed, we can use Ohm's Law again:

R = V / I

where R is the resistance of the series resistor, V is the voltage drop we want to achieve across the series circuit, and I is the current that we want to flow through the circuit (in this case, 100 μA).

Plugging in the values we get:

R = (5V - 0.5V) / (100 μA) = 45.5kΩ

So , 45.5kΩ resistor should be placed in series with the meter movement to achieve full-scale deflection when a voltage of 5V is applied across the entire circuit.

To learn more about Ohm's law https://brainly.com/question/14296509

#SPJ11

When a fast, dense projectile is fired at an object, most projectiles penetrate through, indicating that the projectile's velocity and mass overcome the object's resistance to penetration.


In this scenario, the fast, dense projectile carries a significant amount of kinetic energy due to its high velocity and mass. When it strikes the object, the projectile's kinetic energy is transferred to the object in the form of pressure and force. If the object's resistance (e.g., its strength or material properties) is not strong enough to withstand the pressure exerted by the projectile, it will be penetrated.

Some projectiles may bounce back toward the shooter, suggesting that certain portions of the object might have higher resistance or that the projectile's angle of impact influenced its trajectory upon collision. However, the majority of the projectiles going straight through implies that the object is generally not capable of stopping the projectiles. This conclusion can help in understanding the effectiveness of the projectile as well as the vulnerability of the target object.

Learn more about projectile here:

https://brainly.com/question/28043302

#SPJ11

Option c, the first day of summer, or about June 21. This is because on the summer solstice, the sun is directly overhead at noon and casts the shortest shadow of the year.

In Urbana, IL, which is in the northern hemisphere, this occurs on June 20 or 21. On the other hand, during midwinter or early January, the sun is at its lowest point in the sky, causing shadows to be longer. Similarly, during midsummer or about August 5, the sun is still high in the sky, but not as directly overhead as on the summer solstice, resulting in slightly longer shadows. The first day of spring, or about March 21, is also not as significant for shadow length as the summer solstice. Therefore, the shortest shadow at midday in Urbana, IL can be observed on the first day of summer, or about June 21.

To know more about time visit:

https://brainly.com/question/19930939

#SPJ11

The length of No. 30 Nichrome wire needed to wind a 50 ohm resistor at room temperature is 3.66 meters.

The resistivity of Nichrome wire is given as 1.0 × 10^-6 Ω · m. The diameter of the wire is 0.250 mm, which can be converted to meters by dividing by 1000. Thus, the cross-sectional area of the wire can be calculated as πr^2 = π(0.125 × 10^-3 m)^2 = 4.91 × 10^-8 m^2.  

To calculate the length of the wire needed, we can use the formula for resistance: R = ρl/A, where R is the resistance, ρ is the resistivity, l is the length of the wire, and A is the cross-sectional area. Rearranging the formula, we get l = RA/ρ = (50 Ω)(4.91 × 10^-8 m^2)/(1.0 × 10^-6 Ω · m) = 3.66 meters.  

Therefore, the length of No. 30 Nichrome wire needed to wind a 50 ohm resistor at room temperature is 3.66 meters, which corresponds to option A.

Learn more about resistivity here:

https://brainly.com/question/30669051

#SPJ11

Jupiter radiates more heat than it receives from the Sun.

Jupiter is a gas giant planet and does not have a solid surface to absorb and retain heat like the Earth. Instead, Jupiter's atmosphere absorbs and then re-radiates the energy it receives from the Sun. However, due to its large size and distance from the Sun, Jupiter receives much less solar radiation per unit area than the Earth does.

Despite this, observations show that Jupiter radiates about 1.6 times more heat than it receives from the Sun. This excess heat is generated by gravitational contraction, as the planet slowly shrinks due to its own gravity. As Jupiter contracts, gravitational potential energy is converted into heat, which is then radiated away into space.

This excess heat is also responsible for Jupiter's intense atmospheric dynamics, including its distinctive belts and zones, powerful storms, and the Great Red Spot.

Learn more about Jupiter

https://brainly.com/question/30771974

#SPJ11

Bonnie is an example of a volunteer who is offering her time and skills to help make floral arrangements at a flower shop. This act of volunteering demonstrates her willingness to give back to her community and support local businesses.

By offering her assistance, Bonnie is helping the flower shop to create beautiful and unique arrangements that will enhance the beauty and appeal of their products.

Additionally, her contribution of time and energy helps to ease the workload of the shop's staff and ensure that they are able to meet the demands of their customers.

Overall, Bonnie's decision to volunteer is a positive example of how individuals can make a difference in their communities by offering their time and talents to support local businesses and organizations.

To Learn more about volunteer Click this!

brainly.com/question/28073909

#SPJ11

Earth returns most of the energy it receives from the sun back to space in the form of infrared light emitted by the surface and atmosphere. This process is called radiation.

The temperature of Earth's surface and atmosphere is regulated by the balance between incoming solar radiation and outgoing infrared radiation. If this balance is disrupted, the temperature of Earth can change. The other options listed, such as visible light emitted or reflected by the surface and atmosphere, and ultraviolet light reflected by the surface, are not the primary forms of energy that Earth returns to space. In summary, Earth's temperature remains steady because it radiates most of the energy it receives from the sun back into space in the form of infrared radiation.

To know more about radiation visit:

https://brainly.com/question/31106159

#SPJ11

Thus, the work done is W = 60 N x 6 m = 360 J. Therefore, the correct answer is (e) 360 J.

The work done on the box of books can be calculated using the formula W = Fd, where W is the work done, F is the force applied, and d is the distance over which the force is applied. In this case, the force applied is the weight of the box, which is 60 N, and the distance over which it is carried horizontally is 6 m. It is important to note that the work done on the box is equal to the change in its kinetic energy, and does not depend on the path taken or the force required to keep it moving horizontally.

To know more work visit:

https://brainly.com/question/29487026

#SPJ11

The wavelength of the light in glass is approximately 400 nm. The speed of light changes when it passes from one medium to another, and the change in speed causes the light to bend, or refract.

The amount of bending that occurs is related to the refractive index of the medium. The formula that relates the speed of light, wavelength, and refractive index is:

[tex]v = c / n[/tex]

where v is the speed of light in the medium, c is the speed of light in a vacuum (which is approximately 3.00 x 10^8 m/s), and n is the refractive index of the medium.

We can use this formula to find the speed of light in glass:

v = c / n = (3.00 x 10^8 m/s) / 1.50 = 2.00 x 10^8 m/s

Now we can find the wavelength of the light in glass using the formula:

[tex]λ_glass = λ_vacuum / n[/tex]

where λ_glass is the wavelength of the light in glass, and λ_vacuum is the wavelength of the light in a vacuum.

Substituting the given values, we get:

λ_glass = λ_vacuum / n = (600 nm) / 1.50 ≈ 400 nm

Therefore, the wavelength of the light in glass is approximately 400 nm.

Learn more about wavelength here:

https://brainly.com/question/31322456

#SPJ11

In the Twilight series, vampires' eyes change color because they are not like normal human eyes. The eyes of vampires are described as golden when they are well-fed on human blood, but turn black or dark red when they are thirsty and have not fed on human blood in a while.

This is due to the fact that vampires' eyes are capable of reflecting more light than human eyes, which makes them appear brighter and more intense. Additionally, the color change in their eyes is a way for the author to symbolize the transformation of the vampires from human to vampire, and to highlight their supernatural nature.

To know more about Twilight click this link -

brainly.com/question/897349

#SPJ11

Apnea is a brief cessation of breathing. This condition is a type of sleep disorder characterized by the interruption of normal breathing patterns during sleep.

Apnea can be caused by a variety of factors, including obesity, age, gender, nasal congestion, and smoking. There are two main types of apnea: obstructive sleep apnea and central sleep apnea. Obstructive sleep apnea is caused by a physical blockage of the airway, while central sleep apnea is caused by a failure of the brain to signal the muscles that control breathing.

Apnea can have a significant impact on a person's health, leading to problems such as daytime sleepiness, decreased cognitive function, and an increased risk of heart disease and stroke.

Treatment for apnea typically involves lifestyle changes, such as weight loss and smoking cessation, as well as the use of devices such as continuous positive airway pressure (CPAP) machines to keep the airway open during sleep. In severe cases, surgery may be necessary to correct physical abnormalities in the airway.

To learn more about Apnea

https://brainly.com/question/31580437

#SPJ4

bd = 4 * ad. The relationship between ad and bd is that bd is four times the distance fallen by object A (ad).

We need to look at the equations of motion for objects under free fall. According to these equations, the distance an object falls is proportional to the square of the time it takes to fall. Therefore, if object a falls through a distance d during a time t, we can write: d = (1/2)gt^2   ------(1) where g is the acceleration due to gravity. Similarly, if object b falls through a distance bd during a time 2t, we can write: bd = (1/2)g(2t)^2 = 2(1/2)gt^2 = gt^2  ------(2)
where we have used the fact that (2t)^2 = 4t^2 and (1/2)g(4t^2) = gt^2.

We can see that equations (1) and (2) are related by a factor of 2. Specifically, equation (2) shows that bd = 2d. This means that the distance object b falls is twice the distance object a falls, when they are dropped from the same height and air resistance is negligible. The relationship between a d and bd is that bd = 2d. This can be explained using the equations of motion for objects under free fall, which show that the distance an object falls is proportional to the square of the time it takes to fall.

To know more about distance visit :-

https://brainly.com/question/29552792

#SPJ11

The silver coating on the glass surfaces of a thermos bottle reduces energy that is transferred by radiation.

Here correct option is C.

Radiation is the transfer of heat energy through electromagnetic waves, without requiring a medium. The silver coating is a good reflector of heat radiation, which means that it reflects heat energy back into the thermos bottle, reducing the amount of heat that is lost to the surrounding environment.

This is why a thermos bottle with a silver coating can keep hot liquids hot and cold liquids cold for longer periods of time compared to a regular bottle.

The silver coating helps to minimize the heat transfer by radiation, which is the primary mode of heat transfer for objects at room temperature.

Know more about radiation here

https://brainly.com/question/31106159#

#SPJ11

Condensation is the process through which water droplets develop on the outside of the glass containing ice water.

Water vapour in the surrounding air cools down due to the low temperature of the glass, changing it from a gaseous to a liquid form.

The process by which water vapour in the air is transformed into liquid water is known as condensation. This is the opposite of evaporation.

Warm air colliding with cold surfaces can cause condensation. Also, when the air is in an environment with an excessive amount of humidity.

To learn more about condensation, click:

https://brainly.com/question/15563071

#SPJ1

Answer:

[tex]dt=6.3 \ s[/tex]

Explanation:

Understanding magnetism and how voltage is induced, we can solve this problem. Using the following formula.

[tex]\boxed{\left\begin{array}{ccc}\text{\underline{Induced Voltage:}}\\\\emf=-NA\frac{d \vec B}{dt} \end{array}\right}[/tex]

Where...

Given:

[tex]A=0.15 \ m \times 0.30 \ m \rightarrow 0.045 \ m^2\\N= 120 \ coils\\d \vec B=1.5 \ T -0.10 \ T \rightarrow 1.4 \ T\\ emf= 1.2 \ V[/tex]

Find:

[tex]\Delta t \ or \ dt= \ ?? \ s[/tex]

(1) - Manipulate the above equation to find dt

[tex]||emf||=NA\frac{d\vec B}{dt} \\\\\Longrightarrow dt(emf)=NA d \vec B\\\\\therefore \boxed{dt=\frac{NAd \vec B}{emf} }[/tex]

(2) - Plug in the known values into the equation to solve for dt

[tex]dt=\frac{NAd \vec B}{emf}\\\\\Longrightarrow dt=\frac{(120)(0.045)(1.4)}{1.2} \\\\\therefore \boxed{\boxed{dt=6.3 \ s}}[/tex]

Thus, the problem is solved.

The time interval for the change in magnetic field strength is 168 seconds.

Given parameters of the rectangular coil are:

Length = 0.15mWidth = 0.30m

Number of turns, N = 120

magnetic field strength increased from 0.10 T to 1.5 T. So, initial magnetic field strength, B1 = 0.10 T

Final magnetic field strength, B2 = 1.5 T

Voltage induced in coil, emf = 1.2 V

We need to find the time interval for the change in magnetic field strength.

First we will find the area of the rectangular coil as: A = l * wA = 0.15 m * 0.30 mA = 0.045 m²

Now, using the formula for emf induced in a coil, we have: emf = -N (change in magnetic field strength/time)where N is the number of turns in the coil, and the negative sign indicates that the direction of the induced emf is such that it opposes the change in magnetic field strength.

Here, the magnetic field strength increases uniformly from B1 = 0.10 T to B2 = 1.5 T. Therefore, the change in magnetic field strength is:

change in B = B2 - B1

change in B = 1.5 T - 0.10 T

change in B = 1.4 T

Substituting the given values in the above equation for emf, we get:

1.2 V = -120 (1.4 T / time)

time = -120 (1.4 T / 1.2 V)

time = -168 s (neglecting the negative sign)

time = 168 seconds

You can learn more about time intervals at: brainly.com/question/32341808

#SPJ11

The correct answer is (A) speed.

The acceleration of an object due to gravity is the same for all objects regardless of their masses, and is equal to 9.8 m/s^2. Thus, when dropped from the same height, both the lightweight tennis ball and the heavyweight bowling ball will have the same acceleration and therefore the same speed when they hit the floor.

The force and momentum of the two objects will be different, however. The force is equal to the mass of the object multiplied by its acceleration, and since the bowling ball has a greater mass, it will experience a greater force upon impact. Similarly, the momentum is equal to the mass of the object multiplied by its velocity, and since the bowling ball will have a greater velocity due to its greater mass, it will also have a greater momentum upon impact.

To know more about acceleration click this link -

brainly.com/question/2303856

#SPJ11

The major ingredient in magma that determines whether it has high or low viscosity is its silica content. Silica, or silicon dioxide (SiO2), is a key component of magma and is responsible for its viscosity. Magma with high silica content has a higher viscosity, meaning it is thick and flows less easily. On the other hand, magma with low silica content has a lower viscosity, meaning it is more fluid and flows more easily.

The silica content affects magma viscosity because it influences the arrangement and bonding of the magma's constituent minerals. Magma with high silica content tends to have a greater proportion of silica-rich minerals, such as quartz and feldspar. These minerals have a more complex molecular structure and tend to bond tightly together, resulting in a more viscous magma.

In contrast, magma with low silica content has a higher proportion of minerals like olivine and pyroxene, which have a simpler molecular structure and weaker bonds. This composition allows for easier flow and a lower viscosity.

It's worth noting that temperature and gas content also play a role in magma viscosity, but silica content is considered the primary determinant.

To know more about silica content , refer here :

https://brainly.com/question/1379929#

#SPJ11