Answer:
The reaction produces 201.4 g of hydrogen gas and 12.2 kg of Nickel Phosphate.
Explanation:
English Translation
9.7 Kg of a 70% nickel mineral react with 8L of a 60% phosphoric acid solution and with a density of 1.36g / ml.
Solution
The problem doesn't seen to be complete as it doesn't ask a question in the end. But, we will just calculate the amount of each product expected to cover the grounds.
The balanced chemical reaction between Nickel and Phosphoric acid is given as
3Ni + 2H₃PO₄ → 3H₂ + Ni₃(PO₄)₂
We need to first obtain the limiting reagent, that is, the reagent that is used up during the reaction and is in short supply. This reagent determines the amount of products that will be formed.
Mass of nickel that is present at the start = 70% of 9.7 kg = 6.79 kg
Mass of Phosphoric acid present at the start of the reaction = 60% of (8000 mL × 1.36 g/mL) = 6528 g = 6.528 kg
Converting both of these to number of moles
Number of moles = (mass)/(Molar mass)
For nickel,
Mass = 6.79 kg = 6790 g
Molar mass = 58.6934 g/mol
Number of moles at the start = (6790/58.6934) = 115.7 moles
For Phosphoric acid
Mass = 6528 g
Molar mass = 97.994 g/mol
Number of moles = (6528/97.994) = 66.6 moles
3 moles of Ni reacts with 2 moles of H₃PO₄
From the number of moles present initially, shows that Phosphoric acid is in limited supply and is the limiting reagent.
From the stoichiometric balance of the reaction
2 moles of H₃PO₄ gives 3 moles of H₂
66.6 moles of H₃PO₄ will give (66.6×3/2) of H₂, that is, 99.9 moles of H₂.
Mass of H₂ liberated from the reaction = (Number of moles) × (molar mass) = 99.9 × 2.016 = 201.3984 g = 201.4 g
2 moles of H₃PO₄ gives 1 mole of Ni₃(PO₄)₂
66.6 moles of H₃PO₄ will give (66.6×1/2) of Ni₃(PO₄)₂, that is, 33.3 moles of Ni₃(PO₄)₂.
Mass of Ni₃(PO₄)₂ produced from the reaction = (Number of moles) × (molar mass) = 33.3 × 366.02 = 12,188.466 g = 12.2 kg
Hope this Helps!!!
Of the following three atoms, one tends to lose three electrons, another tends to lose two electrons, and another tends to lose one electron. Rank these atoms in order of the number of electrons they tend to lose, from most to fewest: potassium, K; calcium, Ca; gallium, Ga. Rank from most to fewest.
Answer: Ga > Ca > K
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom.
The electrons are filled according to Afbau's rule in order of increasing energies. The metals tend to get stable by losing electrons to attain noble gas configuration.
[tex]K:19:1s^22s^22p^63s^23p^64s^1[/tex]
[tex]K^+:18:1s^22s^22p^63s^23p^6[/tex]
[tex]Ca:20:1s^22s^22p^63s^23p^64s^2[/tex]
[tex]Ca^{2+}:18:1s^22s^22p^63s^23p^6[/tex]
[tex]Ga:31:1s^22s^22p^63s^23p^64s^23d^{10}4s^24p^1[/tex]
[tex]Ga^{3+}:28:1s^22s^22p^63s^23p^64s^23d^{10}[/tex]
Thus gallium (Ga) loses three electrons, Calcium (Ca) loses 2 electrons and Potassium (K) loses one electron.
Classify the following unbalanced chemical reaction Fe(s) + Cl2(aq) = Fe2+(aq) + Cl-(aq)
1. Acid-Base Reaction
2. Precipitation Reaction
3. Oxidation-Reduction Reaction
4. Combustion Reaction
Answer:
3. Oxidation-Reduction Reaction
Explanation:
Fe(s) + Cl2(aq) = Fe2+(aq) + Cl-(aq)
Fe(s) -2e- ----> Fe2+(aq) oxidation
Cl2(aq) + 2e- -----> 2Cl-(aq) reduction
The given unbalanced chemical reaction is the oxidation-reduction reaction. Therefore, option (3) is correct.
What is an oxidation-reduction reaction?Redox reactions can be defined as oxidation-reduction chemical reactions in which the reactants of the reaction undergo a change in their oxidation states. All the redox reactions are further broken down into two different processes: a reduction process and an oxidation process.
The oxidation and reduction reactions take place simultaneously in an Oxidation-Reduction reaction. The substance that is getting reduced in a reaction is known as the oxidizing agent, while a substance that is getting oxidized is the reducing agent.
The given chemical reaction is:
[tex]Fe(s) + Cl_2(aq) \longrightarrow Fe^{2+}(aq) + Cl^-(aq)[/tex]
The oxidation reaction for this reaction is: Fe (s) → Fe²⁺ (aq) + 2e⁻
The reduction reaction: Cl₂ (g) + 2e⁻ → 2Cl⁻ (aq)
Therefore, the given reaction between the iron and chlorine gas is the oxidation-reduction reaction or redox reaction.
Learn more about oxidation-reduction reactions, here:
https://brainly.com/question/16867778
#SPJ2
According to the ideal gas law, what happens to the volume of a gas when the
temperature doubles (all else held constant)?
A. The volume stays constant.
B. The volume doubles.
OOO
C. It cannot be determined
D. The volume is halved
According to the ideal gas law, when the temperature of a gas doubles, its volume doubles as well (Option B).
What does the ideal law state?The ideal gas law relates the pressure, volume, number of moles and temperature of an ideal gas.
Let's consider the equation of the ideal gas law.
P . V = n . R .T
V = n . R . T / P
As we can see, there is a direct relationship between the volume and the temperature. Thus, if the temperature doubles, the volume will double as well.
According to the ideal gas law, when the temperature of a gas doubles, its volume doubles as well (Option B).
Learn more about the ideal gas law here: https://brainly.com/question/25290815
#SPJ1
12.39 g sample of phosphorus (30.97 g/mol) reacts with 52.54 g of chlorine gas, Cl2
(70.91 g/mol) to form only phosphorus trichloride, PC13 (137.33 g/mol). Which is the
limiting reactant?
Answer:
P is the limiting reagent
Explanation:
P = phosphorus = 30.97g/mol
Cl2 = Chlorine = 70.91g/mol
PCl3 = Phosphorus Trichloride = 137.33g/mol
P + Cl2 = PCl3
Left Side
P = 1
Cl = 2
Right Side
P = 1
Cl = 3
So equation needs to be balanced first
2P + 3Cl = 2PCl3
Left Side
P = 2
Cl = 6
Right Side
P = 2
Cl = 6
That's better.
Ok so we have 12.39g of P so we have 0.4 moles of it
We then have 52.54g of Cl so we have 0.74 moles of it
For every P we need 1.5 Cl so we have an excess of Cl
Classify the following unbalanced chemical reaction Na3PO4(aq) + FecCl2(aq) = Fe3(PO4)2(s) + NaCl(aq)
1. Acid-Base Reaction
2. Precipitation Reaction
3. Oxidation-Reduction Reaction
4. Combustion Reaction
Answer:
2. Precipitation Reaction
Explanation:
Na3PO4(aq) + FecCl2(aq) = Fe3(PO4)2(s) + NaCl(aq)
Fe3(PO4)2(s) - solid, it means it will precipitate.
It is a precipitation reaction.
What is precipitate give example?A precipitate is a solid that forms out of a solution. A common example is that of the mixing of two clear solutions: (1) silver nitrate (AgNO3) and (2) sodium chloride (NaCl): The reaction is. The precipitate forms because the solid (AgCl) is insoluble in water.
What is precipitate formation?A precipitate is a solid formed in a chemical reaction that is different from either of the reactants. This can occur when solutions containing ionic compounds are mixed and an insoluble product is formed. The identity of the precipitate can often be determined by examining solubility rules.
Learn more about precipitation reaction here https://brainly.com/question/12144162
#SPJ2
Consider the following reaction where Kc = 1.80×10-2 at 698 K:
2HI(g) → H2(g) + I2(g)
A reaction mixture was found to contain 0.280 moles of HI (g), 2.09×10^-2 moles of H2 (g), and 4.14×10^-2 moles of I2 (g), in a 1.00 liter container.
Required:
a. Is the reaction at equilibrium?
b. What direction must it run in order to reach equilibrium?
c. The reaction
1. must run in the forward direction to reach equilibrium.
2. must run in the reverse direction to reach equilibrium.
3. is at equilibrium.
Answer:
The system is not in equilibrium and the reaction must run in the forward direction to reach equilibrium.
Explanation:
The reaction quotient Qc is a measure of the relative amount of products and reagents present in a reaction at any given time, which is calculated in a reaction that may not yet have reached equilibrium.
For the reversible reaction aA + bB⇔ cC + dD, where a, b, c and d are the stoichiometric coefficients of the balanced equation, Qc is calculated by:
[tex]Qc=\frac{[C]^{c}*[D]^{d} } {[A]^{a}*[B]^{b}}[/tex]
In this case:
[tex]Qc=\frac{[H_{2} ]*[I_{2} ] } {[HI]^{2}}[/tex]
Since molarity is the concentration of a solution expressed in the number of moles dissolved per liter of solution, you have:
[tex][H_{2} ]=\frac{2.09*10^{-2} moles}{1 Liter}[/tex]=2.09*10⁻² [tex]\frac{moles}{liter}[/tex][tex][I_{2} ]=\frac{4.14*10^{-2} moles}{1 Liter}[/tex]=4.14*10⁻² [tex]\frac{moles}{liter}[/tex][tex][I_{2} ]=\frac{0.280 moles}{1 Liter}[/tex]= 0.280 [tex]\frac{moles}{liter}[/tex]So,
[tex]Qc=\frac{2.09*10^{-2} *4.14*10^{-2} } {0.280^{2} }[/tex]
Qc= 0.011
Comparing Qc with Kc allows to find out the status and evolution of the system:
If the reaction quotient is equal to the equilibrium constant, Qc = Kc, the system has reached chemical equilibrium.
If the reaction quotient is greater than the equilibrium constant, Qc> Kc, the system is not in equilibrium. In this case the direct reaction predominates and there will be more product present than what is obtained at equilibrium. Therefore, this product is used to promote the reverse reaction and reach equilibrium. The system will then evolve to the left to increase the reagent concentration.
If the reaction quotient is less than the equilibrium constant, Qc <Kc, the system is not in equilibrium. The concentration of the reagents is higher than it would be at equilibrium, so the direct reaction predominates. Thus, the system will evolve to the right to increase the concentration of products.
Being Qc=0.011 and Kc=1.80⁻²=0.018, then Qc<Kc. The system is not in equilibrium and the reaction must run in the forward direction to reach equilibrium.
A solution is made by adding 35.5 mL of concentrated hydrochloric acid ( 37.3 wt% , density 1.19 g/mL1.19 g/mL ) to some water in a volumetric flask, and then adding water to the mark to make exactly 250 mL 250 mL of solution. Calculate the concentration of this solution in molarity.
Answer:
1.73 M
Explanation:
We must first obtain the concentration of the concentrated acid from the formula;
Co= 10pd/M
Where
Co= concentration of concentrated acid = (the unknown)
p= percentage concentration of concentrated acid= 37.3%
d= density of concentrated acid = 1.19 g/ml
M= Molar mass of the anhydrous acid
Molar mass of anhydrous HCl= 1 +35.5= 36.5 gmol-1
Substituting values;
Co= 10 × 37.3 × 1.19/36.5
Co= 443.87/36.6
Co= 12.16 M
We can now use the dilution formula
CoVo= CdVd
Where;
Co= concentration of concentrated acid= 12.16 M
Vo= volume of concentrated acid = 35.5 ml
Cd= concentration of dilute acid =(the unknown)
Vd= volume of dilute acid = 250ml
Substituting values and making Cd the subject of the formula;
Cd= CoVo/Vd
Cd= 12.16 × 35.5/250
Cd= 1.73 M
Three different students determined the density of a metal object. Here are their results: 15.12 g/mL, 15.09 g/mL, and 15.12 g/mL. The actual density of the object was 14.41 g/mL. Calculate the percent error. Make sure to include units with your answer, units are %.
Answer:
The correct answers are 4.93 %, 4.72 % and 4.93 %.
Explanation:
Based on the given question, 14.41 g per ml is the actual density of the object. However, the density determined by three different students of the object is 15.12 g per ml, 15.09 g per ml, and 15.12 g per ml. The percent error can be calculated by using the formula,
% error = (actual value - calculated value) / actual value * 100
By 1st student, the calculated value is 15.12 g per ml, the percent error will be,
% error = (14.41 - 15.12) / 14.41 * 100
= 0.71/14.41 * 100
= 4.93 %
By 2nd student, the calculated value is 15.09 g per ml, the percent error will be,
% error = (14.41-15.09)/14.41 * 100
= 0.68/14.41 * 100
= 4.72 %
By 3rd student, the calculated value is 15.12 g per ml, the percent error will be,
% error = (14.41-15.12)/14.41 * 100
= 0.71/14.41 * 100
= 4.93 %
What allows two or more atoms to be held together?
Answer:
Atoms come together to form molecules because of their electrons. Electrons can join (or bond) atoms together in two main ways. When two atoms share electrons between them, they are locked together (bonded) by that sharing. These are called covalent bonds.
Explanation:
Answer:
Electrons
Explanation:
took the test got 100%
During lab, you evaluated the bond order and bond length of a series of carbon-carbon bonds. Use the same concepts to predict the bond order and bond length of a series of nitrogen-nitrogen bonds.(a) Which of the structures below have a nitrogen-nitrogen bond order of 3?(b) Which of the structures below have the shortest nitrogen-nitrogen bond?
Answer:
N≡N
Explanation:
The image attached shows the nitrogen compounds that are being referred to in the question.
There are certain things we ought to know in order to answer the question accurately.
The bond order of a compound is equal to the number of bonds between two atoms. The greater the bond order, the shorter the bond length between the two atoms.
N≡N has a bond order of three, this is the highest bond order among all the species listed in the question. Hence it has the shortest bond length among the trio. Hence the answer.
What is the limiting reactant if 8 g of Ba reacts with 2.8 g of Al2(SO4)3?
Answer:
Al2(SO4)3 is the limiting reactant
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
3Ba + Al2(SO4)3 → 2Al + 3BaSO4
Next, we shall determine the mass of Ba and the mass of Al2(SO4)3 that reacted from the balanced equation. This is illustrated below:
Molar mass of Ba = 137g/mol
Mass of Ba from the balanced equation = 3 x 137 = 411g
Molar mass of Al2(SO4)3 = 2x27 + 3[32 + (16x4)]
= 54 + 3[32 + 64]
= 54 + 3[96]
= 54 + 288 = 342g/mol
Mass of Al2(SO4)3 from the balanced equation = 1 x 342 = 342g
Summary:
From the balanced equation above,
411g of Ba reacted with 342g of Al2(SO4)3.
Finally, we shall determine the limiting reactant as follow:
From the balanced equation above,
411g of Ba reacted with 342g of Al2(SO4)3.
Therefore, 8g of Ba will react with
= (8 x 342/411 = 6.66g of Al2(SO4)3.
From the calculations made above, we can see that it will take a higher mass of Al2(SO4)3 i.e 6.66g than what was given i.e 2.8g to react completely with 8g of Ba.
Therefore, Al2(SO4)3 is the limiting reactant and Ba is the excess reactant.
1- A volumen constante un gas ejerce una presión de 880 mmHg a 20º Celsius dentro de una olla a presión ¿Qué temperatura habrá si el marcador de presión muestra un valor de 1050 mmHg?
Answer:
In this problem the correct thing would be to use the ideal gas equation.
Explanation:
Well in this exercise we will use the following equation:
(P x V) / T = (p x v) / t
On the right side of the equation we will find the initial values, that is, the values with which the reaction begins and in general they are always the first to write in the problems.
Instead on the left side of the equation, the letters that are in lowercase are the final values, that is to say at the end of the reaction that the values of pressure, temperature and volume are reached.
P is pressing, just like p, T and t are temperature, and V and v are volume.
We use this equation so we consider the behavior of said gas to be an IDEAL gas, a constant volume.
That is why the given pressures require an atmosphere to pass, which is another unit used to press the pressure ... Much needed in this equation! An atmosphere is equivalent to 760 millimeters of mercury ...
Then the final and initial pressures would be:
initial pressure: 1.15 atm
final pressure: 1.38 atm
In this way you already have the values to be able to solve in the equation your unknown that would be the final temperature:
Considering that the volume is constant, we cancel it from the equation, 1.15 atm would be in the value of P and 1.38 in the value of p ... In this way it considers that 20 degrees Celsius is the initial temperature or ses T, we would only have to clear the t.
A sample of chemical X is found to contain 5.0 grams of oxygen, 10.0 grams of carbon, and 20.0 grams of nitrogen. The law of definite proportion would predict that a 75 gram sample of chemical X should contain how many grams of carbon
Answer: 75 grams sample of chemical X should contain 21.43 grams of carbon
Explanation: The law of definite proportion states that a given chemical compound always contains its component elements in fixed ratio.
From the question, chemical X contains 5.0 grams of oxygen, 10.0 grams of carbon, and 20.0 grams of nitrogen.
Sum up the masses
5.0g + 10.0g + 20.0g = 35.0g
This means, 10.0 grams of carbon are present in 35.0 grams of chemical X.
Now, to the determine the mass of carbon that 75 gram sample of chemical X should contain,
According to the law of definite proportion, the component elements of a given chemical compound are in fixed ratio. Therefore,
If 35.0g of chemical X contains 10.0g of carbon
Then, 75 g of chemical X will contain
(75 × 10) / 35 g
= 21.43 grams
Hence, 75 grams sample of chemical X should contain 21.43 grams of carbon.
Answer:
According to the law of definite proportion, a 75 gram sample of chemical X should contain 21.249 grams of carbon.
Explanation:
The total mass of the sample is equal to the sum of masses of oxygen, carbon and nitrogen. That is:
[tex]m_{tot} = m_{O} + m_{C} + m_{N}[/tex]
If [tex]m_{O} = 5\,g[/tex], [tex]m_{C} = 10\,g[/tex] and [tex]m_{N} = 20\,g[/tex], then:
[tex]m_{tot} = 35\,g[/tex]
According to the law of definite proportion, the following simple rule of three is used:
[tex]m_{C'} = m_{C} \times \frac{m_{tot'}}{m_{tot}}[/tex]
If [tex]m_{C} = 10\,g[/tex], [tex]m_{tot} = 35\,g[/tex] and [tex]m_{tot'} = 75\,g[/tex], then:
[tex]m_{C'} = 10\,g\times \frac{75\,g}{35\,g}[/tex]
[tex]m_{C'} = 21.429\,g[/tex]
According to the law of definite proportion, a 75 gram sample of chemical X should contain 21.249 grams of carbon.
Without doing any calculations, arrange the elements in CF2Cl2 in order of decreasing mass percent composition. Rank from highest percent to lowest.
a. C > F > Cl
b. F < Cl > C
c. Cl > C > F
d. Cl > F > C
Answer:
a. C > F > Cl
Explanation:
We know that atomic mass of Chlorine is greater than of Florine than that of carbon. Moreover, in CF2Cl2, therefore, there are two atoms of Cl, F and one atom of C. Therefore, in CF2Cl2 in order of decreasing mass percent composition C > F > Cl. Therefore, the correct option is a.
4-Nitrophenol, NO2C6H4OH (pKa 7.15), is only slightly soluble in water, but its sodium salt, NO2C6H4O-Na+, is quite soluble in water. Describe the solubility of 4-nitrophenol in solutions of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3). The pKa values for the conjugate acids of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3) are 15.7, 6.36, and 10.33, respectively. Aqueous NaOH: _________ Aqueous NaHCO3: _________ Aqueous Na2CO3: _________
Answer:
Aqueous NaOH: soluble
Aqueous NaHCO₃: insoluble
Aqueous Na₂CO₃: soluble
Explanation:
The organic acid is insoluble. Its salt (ionic) is soluble.
The important principle is:
If you have two acids in a flask, the stronger acid (smaller pKₐ) will protonate the weaker one. The stronger acid will become ionic and therefore more soluble.
1. In NaOH
Let's write the formula for 4-nitrobenzoic acid as HA.
The equation for the reaction is
HA + OH⁻ ⇌ A⁻ + H₂O
pKₐ: 7.15 15.7
HA is the stronger acid. It will protonate the hydroxide ion and be converted to the soluble 4-nitrobenzoate ion.
4-Nitrophenol is soluble in NaOH.
2. In NaHCO₃
HA + HCO₃⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 6.36
HCO₃⁻ is the stronger acid. It will protonate 4-nitrophenol.
4-Nitrobenzoic acid is insoluble in NaHCO₃.
3. In Na₂CO₃
HA + CO₃²⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 10.33
HA is the stronger acid. It will protonate the carbonate ion.
4-Nitrophenol is soluble in Na₂CO₃.
Barium is a very reactive metal in the presence of oxygen and water, thus its density cannot be measured by water displacement. Instead, mesitylene (C9H12, density = 0.86370 g/mL (at 20 o C)) is used. 77.240 g of Ba is placed into a flask, and mesitylene is added so that together the total volume is 100.00 mL. The mass of the mesitylene and Ba together is 148.792 g. What is the density (in g/mL) of the Ba at 20 o C?
Answer:
The correct answer is 4.502 g per ml.
Explanation:
Based on the given question, the sum of the mass of mesitylene and barium together is 148.792 grams. The mass of barium given is 77.240 grams. Therefore, the mass of mesitylene will be,
Mass of mesitylene = Total mass - Mass of barium
= 148.792 - 77.240
= 71.552 grams
The density of mesitylene is 0.86370 g per ml. To calculate the volume of mesitylene, the formula to be used is,
Volume = mass / density. Now, putting the values we get,
Volume = 71.552 / 0.86370 = 82.8436 ml.
As the total volume is 100 ml, therefore, the volume of Ba will be,
Volume of Ba = 100-82.8436 = 17.1564 ml
The density of Ba at 20 degree C can be calculated by using the formula,
Density = mass / volume. Now putting the values we get,
Density = 77.240 g / 17.1564 ml
= 4.502 g per ml
A sample of chloroform, CHCl 3 , , was determined to have a molecular mass of 112.3g / (mol) . Its molecular mass is known to be 119.5g / (mol) . Calculate the absolute error and the percent error
Answer:
Explanation:
in your case ,
Meaured value = 112.3
actual value = 119.5
Absolute error= measured value - actual value
Percent error = [measured value - actual value / actual value ] x 100
Hope this help you to find the answer
Find the age ttt of a sample, if the total mass of carbon in the sample is mcmcm_c, the activity of the sample is AAA, the current ratio of the mass of 14 6C 614C to the total mass of carbon in the atmosphere is rrr, and the decay constant of 14 6C 614C is λλlambda. Assume that, at any time, 14 6C 614C is a negligible fraction of the total mass of carbon and that the measured activity of the sample is purely due to 14 6C 614C. Also assume that the ratio of mass of 14 6C 614C to total carbon mass in the atmosphere (the source of the carbon in the sample) is the same at present and on the day when the number of 14 6C 614C atoms in the sample was set. Express your answer in terms of the mass mamam_a of a 14 6C 614C atom, mcmcm_c, AAA, rrr, and λλlambda. View Available Hint(s)
Answer:
Explanation:
An artifact is found in a desert cave. The anthropologists who found this artifact would like to know its age. They find that the present activity of the artifact is 9.25 decays/s and that the mass of carbon in the artifact is 0.100 kg. To find the age of the artifact, they will need to use the following constants:
r=1.2
The activity of carbon 14 is
[tex]A=A_0e^{\lambda t}[/tex]
where,
[tex]A_0[/tex] is the initial activity of the compound
Solve for t
[tex]-\lambda t=In\frac{A}{A_0}[/tex]
[tex]t=-\frac{1}{\lambda} In(\frac{A}{A_0} )[/tex]
[tex]=-\frac{1}{\lambda} In(\frac{A}{\lambda r(\frac{m_c}{m_a} )} )[/tex]
since,
[tex]A_0=\lambda r(\frac{m_c}{m_a} )[/tex]
[tex]=-\frac{1}{\lambda} In(\frac{A\ m_a}{\lambda r m_c} )[/tex]
Now, the age of the artifact is
[tex]=-\frac{1}{\lambda} In(\frac{A\ m_a}{\lambda r m_c} )[/tex]
[tex]=-\frac{1}{1.21\times 10^{-4}} In(\frac{(9.25)(2.32\times 10^{-26}}{1.21\times 10^{-4}(\frac{1}{3.15569\times10^7} )(1.2\times 10^{-12})(0.100)}} )\\\\=6303.4 \ years[/tex]
to two significant figure = 6300 years
Compound H is optically active and has the molecular formula C6H10 and has a five carbon ring. On catalytic hydrogenation, H is converted to I (C6H12) and I is optically inactive. Propose structures for H and I. (Draw a three-dimensional formula for each using dashes and wedges around chiral centers.)
Answer:
Explanation:
Given that ;
Compound H is optically active and have a molecular formula of C6H10 and therefore undergo catalytic hydrogenation. Catalytic hydrogenation involves the use Platinum/Nickel to produce C6H12
i.e
[tex]C_6H_{10} +H_2 \to ^{Pt/Ni} \ \ \ C_6H_{12}[/tex]
The proposed H and I structures are shown in the diagrams attached below .
compound H represents 3- methyl cyclopentene
compound I represents methyl cyclopentane
However; 3- methyl cyclopentene posses just only one chiral carbon which is optically active at the third position and it R and S enantiomers are shown in the second diagram below.
The starting material is 3-methylcyclopentene while the optically inactive product is 1-methyl cyclopentane.
Hydrogenation refers to the addition of hydrogen across the double bond of an unsaturated compound. Hydrogenation results in the formation of a saturated compound having two more hydrogen atoms than the starting material.
The starting material is optically active 3-methylcyclopentene. The R and S enantiomers of the starting material is shown in image (1) attached. The optically inactive product is, 1-methyl cyclopentane is shown in image (2) attached.
Learn more: https://brainly.com/question/6249935
3 Pieces of Key Information elements, compounds, mixtures also state a real world example of elements, compounds, mixtures and lastly why is elements, compounds, mixtures are important
Answer:
Element and compounds are the pure substances but mixture is not a pure substance.
Explanation:
Element and compounds are the pure substances in which element comprise of only one atom while compound is formed by the chemical combination of more than one element in a fixed ratio by mass while mixture is also made up of more that one substances but they are combine physically not chemically. Elements, compounds, mixtures are very important because all the materials we used in our daily life are formed from elements, compounds and mixtures.
Change the bond between the two carbon atoms in each molecule to a double or triple bond as needed to complete the structure. If the bond should remain a single bond, then you do not need to do anything to the bond. Do not change any other bonds in the molecules.
Answer:
Your question is complex, because I think you wrote it wrong.
Although in front of this what I can help you is that the carbons are associated between a single, double or triple union.
This depends on whether they are attached to more or less carbons or hydrogens, the carbons have the possibility of joining 4 radicals, both other carbons and hydrogens.
Simple junctions talks about compound organisms called ALKANS.
The double unions, in organic these compounds are called as ALQUENOS.
And as for the tertiary unions, the organic chemistry names them as ALQUINOS.
These compounds that we write, a simple union, the less energy, the less this union, that is why the triple bond is the one that contains the most energy when breaking or destroying it in a reaction.
Explanation:
In a chemical compound the change of these unions if we modified them we would generate changes even in the classifications naming them as well as different compounds and not only that until they change their properties
Answer:
Answer:
The first should be left asis because carbon already has 4 bonds/8 electrons
The second needs to have a double bond to give carbon 4 bonds/8 electrons
The third must have a triple bong between the carbons to give them both 4 bonds/8 electrons
Explanation:
Make sure Hydrogen only has 1 bond/2 electrons at all times. Carbon needs a total of 4 bonds/8 electrons
The standard free energy change, ΔG°', for this reaction is +6.7 kJ/mol. However, the observed free energy change (ΔG) for this reaction in pig heart mitochondria is +0.8 kJ/mol. What is the ratio of [isocitrate]/[citrate] in these mitochondria at 25.0 °C?
Consider the reaction C12H22O11 (s) + 12 O2 (g) → 12 CO2 (g) + 11 H2O (l) in which 10.8 g of sucrose, C12H22O11, was burned in a bomb calorimeter with a heat capacity of 7.50 kJ/oC (including its water). The temperature inside the calorimeter was found to increase by 20.5 oC. Based on this information, what is the heat of this reaction per mole of sucrose? Enter your answer numerically, in terms of kJ/
Answer:
THE HEAT OF THIS REACTION PER MOLE OF SUCROSE IS 4868.75 KJ OF HEAT.
Explanation:
To answer this question:
First calculate the total heat given off by sucrose:
Total energy/ heat = heat capacity * change in temperature
Heat capacity = 7.50 kJ/ °C
Change in temperature = 20.5 °C
Heat = 7.50 kJ * 20.5 °C
Heat = 153.75 kJ of heat.
Next is to calculate the heat of reaction per mole of the sucrose
Equation of the reaction:
C12H22011 (s) + 12 O2 (g) ---------> 12 CO2 (g) + 11 H20(l)
Since 1 mole of sucrose will be the molar mass of sucrose, then we should calculate the molar mass of sucrose.
Molar mass of sucrose = ( 12* 12 + 1 * 22+ 16*11) g/mol
Molar mass = 342 g/mol of sucrose
Since 10.8 g of sucrose produces 153.75 kJ of heat, 342 g will produces how many joules of heat?
10.8 g of sucrose = 153.75 kJ of heat
342 g of sucrose = ( 342 * 153.75 kJ / 10.8)
= 52 582.5 kJ / 10.8
= 4868.75 kJ of heat
So therefore, 1 mole of sucrose will produce 4868.75 kJ of heat.
Take a series of observations to determine if process is spontaneous. Based upon those observations, you will create an activity series, listing the metals in order of their reactivity. Second, you will construct a series of virtual galvanic cells and use those to power a stopwatch. Third, you will determine the standard reduction potential of an unknown metal; comparing its reduction potential to a standard list, you will identify the unknown. Finally, you will create a situation in which the cells are not in the standard condition and measure the cell potential; using the Nernst equation, you will determine the concentration of an unknown solution
Answer the below questions for the portion of the activity in which Sn(s) is placed in AgNO3(aq)
1. Is there a reaction? (circle the correct response) Yes / No
2. How many electrons are transferred 4 electrons
3. Write the balanced redox reaction for the combination of AgNO3(aq) and Sn(s)Sn(s) + Ag+(aq) Sn2+(aq) + Ag(s)
Answer:
Explanation:
2AgNO₃ + Sn ⇄ Sn( NO₃)₂ + 2Ag
Ag⁺/Ag = .80 V
Sn⁺²/Sn = - .14 V
Hence Ag will be reduced and Sn will be oxidised . Hence the reaction will take place . YES .
2 ) 2 electrons are transferred .
3 )
2Ag⁺ + 2e = 2Ag
Sn = Sn⁺² + 2e
---------------------------
2Ag⁺ + Sn = Sn⁺² + 2Ag .
10. How many grams of NH, are present in 6 moles
of NH,?
Answer:
90.08784 grams
Explanation:
idk
Light travels three-fourths as fast through water as it does through a vacuum.
What is water's index of refraction?
Calculate the percent saturated fat in the total fat in butter
A teacher has asked some groups of students to investigate the relationship between the organ systems of the human body. One group of students made the argument that many of the systems are related to each other. How can the illustration be used to support this argument?
Choose the correct answer.
The nervous system produces signals that control all of the body’s muscle movements.
The skeletal system provides the physical support for the respiratory system.
The digestive system breaks down food into nutrients that are transported by the circulatory system.
The endocrine system sends hormones to target organs in response to signals from the reproductive system.
Answer: The digestive system breaks down food into nutrients that are transported by the circulatory system.
Explanation:
An organ system includes the organs which are linked to one another to perform a physiological function in the body of the organism. The digestion is a complex process in which the food is being broken down into sub-components so that it can be assimilated in the body. The digestive system involves the multiple organs like mouth, esophagus, stomach, intestines and others. The food being digested is absorbed in the bloodstream, which circulate in the vital organs of the body like lungs, heart, vascular system hence, the blood becomes the part of the circulatory system.
Thus it can be said that the argument of children that the two systems are related is justified by the digestive and circulatory system of the body.
What is Hess‘s law please help
The correct answer is D. Hess's law states than the enthalpy of a reaction does not depend on the reaction path
Explanation:
In a chemical reaction, the enthalpy refers to the internal energy in a system and how this increases or decreases during the reaction. According to Hess's law proposed by German Hess in 1940, the enthalpy does not depend on the reaction path or the number of steps in a reaction. This means one reaction of only one step will have the same enthalpy that if the reaction occurs in several steps because the energy that requires all the process is the same. Thus, the "Hess's law states than the enthalpy of a reaction doe s not depend on the reaction path".
One method of experimentally determining whether a species is paramagnetic is to weigh it in an instrument called a magnetic susceptibility balance. This is a balance with a strong electromagnet placed next to the sample holder. If the species is paramagnetic, the mass reading of the balance will increase when the field is switched on.Classify these species as paramagnetic or diamagneticWhich species will have the strongest mass shift on a magnetic susceptibility balance?
Answer:
Diamagnetic have paired electrons while paramagnetic have at least one unpaired electron.
Explanation:
F2, C2 and N2 are diamagnetic while O2 and B2 are paramagnetic. Diamagnetic are those atoms which have paired electrons while paramagnetic are those atoms which contain at least one unpaired electron so we can say that F2, C2 and N2 have paired electrons while O2 and B2 have unpaired electrons. When diamagnetic materials are allowed to contact with external magnetic field so they will be repelled while paramagnetic materials are attracted by magnetic field due to the presence of unpaired electrons.
Iron oxide (FeO) is the strongest paramagnetic material having the value of 720.
