Answer:
Moles Lost = 0.0335 moles
Explanation:
This type of question requires the Ideal Gas Law equation. The equation looks like this:
PV = nRT
In this formula,
-----> P = pressure (kPa)
-----> V = volume (L)
-----> n = number of moles
-----> R = constant (8.314 L*kPa/mol*K)
-----> T = temperature (K)
(Step 1)
To find how many moles were lost, you first need to find how many moles you had to begin with. This can be done by plugging the starting values into the equation and solving for "n". But first, you need to convert Celsius to Kelvin (by adding 273.15).
P = 225 kPa R = 8.314 L*kPa/mol*K
V = 2.75 L T = 25°C + 273.15 = 298.15 K
n = ?
PV = nRT
(225 kPa)(2.75 L) = n(8.314 L*kPa/mol*K)(298.15 K)
618.75 = n(2478.8191)
0.250 = n
(Step 2)
Next, you need to find the number of moles in the container after it has been re-sealed. The volume is the same because the container did not change. The process should be the same as above.
P = 185 kPa R = 8.314 L*kPa/mol*K
V = 2.75 L T = 10°C + 273.15 = 283.15 K
n = ?
PV = nRT
(185 kPa)(2.75 L) = n(8.314 L*kPa/mol*K)(283.15 K)
508.75 = n(2354.1091)
0.216 = n
(Step 3)
Finally, you can find the number of moles lost by subtracting the final amount of moles from the original amount. When doing this calculation, I used the value of the moles saved in my calculator (with more decimal places) to get a more accurate number.
Moles Lost = Initial Moles - Final Moles
Moles Lost = 0.250 moles - 0.216 moles
Moles Lost = 0.0335 moles
Please answer step by step.
3 moles of NaOH reacts with 1 mole of phosphoric acid.
What is the moles ratio of the NaOH and Phosphoric acid reaction?The moles ratio of the reaction between NaOH and Phosphoric acid is given by the equation of the reaction below:
[tex]3\:NaOH + H_{3}PO_{4} \rightarrow Na_{3}PO_{4} + 3\:H_{2}O \\ [/tex]
Based on the equation of the reaction, 3 moles of NaOH reacts with 1 mole of phosphoric acid.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
Which is not a characteristic of a compound?
has different properties from its component elements
different samples have different properties
can be represented by a chemical formula
a pure substance made of two or more elements
b) Explain what happens when a drop of concentrated sugar solution is placed on a rheo leaf peel mounted on a glass slide. Name this phenomenon. Would the same happen if the rheo leaf was boiled before mounting? Give reason for your answer
The rheo leaf peel will lose water by osmosis and become flaccid. If the rheo leaf was boiled, this would not happen.
What is osmosis?Across living membranes, water moves from a region of high to a region of low water potential.
Concentrated sugar solutions have low water potential when compared to the cell sap of the cells of rheo leaf peel. Thus, water will move from the rheo leaf peel to the sugar solution.
This will result in the wilting of the leaf peel.
If the leaf peel is boiled, the membranes in the cells die and can no longer function as a selectively permeable interface.
More on osmosis can be found here: https://brainly.com/question/1799974
#SPJ1
A 13.00 g sample of citric acid reacts with an excess of baking soda as shown in the equation.
H3C6H507 +3NaHCO3 →3CO2 + 3H₂O+Na3C6H507
What is the theoretical yield of carbon dioxide?
0.993 g
O2.98 g
O 3.65 g
8.93 g
Answer:
eheheehehehszndn!jejxxnndrrjrrrfufurururufjththjrjrjdjjjrj\u\ujrjeejrjjjj carbon
if the maximum temperature for a particular day is 20°c and the minimum temperature is 10°c, the daily mean would be:
The daily mean, given the data from the question is 15 °C
Data obtained from the questionMaximum temperature = 20 °CMinimum temperature = 10 °CMean = ?How to determine the daily meanMean = Sumation of data / Number of data
Mean = (20 + 10) / 2
Mean = 30 / 2
Mean = 15 °C
Learn more about statistics:
https://brainly.com/question/8974461
#SPJ12
Please select the word from the list that best fits the definition
Rock that is formed from the remains of older rocks and organisms
Super position
Radioactive dating
Sedimentary
Igneous
Metamorphic
Rock Cycle
You are trying to determine the
freezing point for a 0.195 m
baqueous solution of K₂S.
How many particles does K2S
dissociate into?
From the equation; there are three particles in solution.
What is freezing point?The term freezing point is the temperature at which a liquid substance is converted to solid. We know that this is colligative property thus it depends on the number of particles in solution.
The dissolution of K₂S gives us;
K₂S(s) ----> 2K^+(aq) + S^2-(aq)
This implies that there are three particles in solution.
Learn more about freezing point:https://brainly.com/question/3121416
#SPJ1
Which particles that make up an atom are involved in nuclear reactions?.
what is electron
and the unit
state and explain the trend in electronegativity values across period 3 from sodium to chlorine
The trend in electronegativity values across period 3 from sodium to chlorine is that sodium with 11 protons is the least electromagnetic element and chlorine with 17 protons is the most electronegative element.
What is electronegativity?It should be noted that electronegativity simply means a chemical property that describes the tendency of an atom to attract elements towards it.
In this case, the trend in electronegativity values across period 3 from sodium to chlorine is that sodium with 11 protons us the least electromagnetic element and chlorine with 17 protons is the most electronegative element.
Learn more about electronegativity on:
brainly.com/question/24977425
#SPJ12
deduce the molecular formula of hydrogen 18.2%, carbon 81.8%, relative molecular mass is 44
Answer:
let number of carbon is an
Explanation:
hence 12 and + 2n is equal to 126
14 and is equal to 126
n is equal to 9
Solid aluminum and oxygen gas react to form solid aluminum oxide. Suppose you have 3.0 mol of Al and 11.0 mol of O2 in a reactor. Suppose as much as possible of the reacts. How much will be left? Round your answer to the nearest 0.1 mol.
8.75 moles of oxygen will be left
The reaction is
Al(s) + O₂(g) -----> Al₂O₃(s)
On balancing the equation, we get:
4Al(s) + 3O₂(g) -----> 2Al₂O₃(s)
If 3 mol of Al reacts, we need 3/4 x 3 = 9/4 = 2.25 mol of oxygenIf 11 mol of oxygen reactions, we need 11/3 x 4 = 44/3 = 14.7 mol of AluminiumBut we only have 3 mol of AlAluminium is the limiting reagent and all 3 moles of Al will reactWe get 2 moles of aluminium oxide from 4 moles of aluminium. So from 3 moles of aluminium, we get:3/4 x 2 = 6/4 = 1.5 moles of aluminium oxide
If we use 4 moles of Al, we need 3 moles of oxygenSo when we use 3 moles of Al, we need3/4 x 3 = 9/4 = 2.25 mol of oxygen
We had 11 moles of oxygenThe amount of oxygen left = 11-2.25 = 8.75 mol8.75 moles of oxygen will be left
Learn more about limiting reagents here:
https://brainly.com/question/23661051
#SPJ10
compare the properties of physical and chemical change with the help of an example.
Explanation:
For physical change(1)It is easily reversable, example: the melting of ice.
(2)It produces no new substance example: all cases of melting of solid to liquid.
(3) There is no change in the mass of the substance
example: the magnetization of iron.
For chemical change(1)It is not easily reversable, example: all cases of burning.
(2) new substance are produced example: rusting of iron.
(3) There is change in the mass of the substance, example : slaking of lime.
Which word equation best describes the following formula equation:
4Al+3O2→2Al2O3?
A. Four molecules of aluminum and three molecules of diatomic oxygen react to form two molecules of aluminum oxide.
B. Four molecules of aluminum react with six molecules of oxide to form twelve molecules of aluminum oxide.
C. Two molecules of aluminum oxide reacts to form three molecules of oxygen and four molecules of aluminum.
D. Aluminum reacts with oxide to form aluminum oxide.
Option A is the correct answer that describes the equation best as compared to other statement.
Which statement best describes the equation?Four molecules of aluminum and three molecules of diatomic oxygen react to form two molecules of aluminum oxide is the statement best describes the equation because this statement have same number of molecules that reacted in the equation. We considered an equation correct that have wrong numbers in front of atoms.
4Al+3O2------------>2Al2O3
So we can conclude that option A is the correct answer that describes the equation best as compared to other statement.
Learn more about equation here: https://brainly.com/question/2972832
#SPJ1
write the transitional metals and their electronic configuration
Answer:
yo no se nada
Explanation:
solo se que no se nada xd
N₂ + 3H2 → 2NH3
224 L of nitrogen reacts with
excess hydrogen at 2773 K and
95 atm, using up 93.5 mol N2.
How many moles of ammonia
form?
Answer:
187 moles NH₃
Explanation:
To find the amount of ammonia formed, you need to multiply the given value by the mole-to-mole ratio consisting of both relevant molecules. The mole-to-mole ratio is made up of the molecules' coefficients in the balanced equation. The desired unit should be placed in the numerator of the ratio. The final answer should have 3 sig figs to reflect the lowest amount of sig figs among the given values.
1 N₂ + 3 H₂ ----> 2 NH₃
^ ^
93.5 moles N₂ 2 moles NH₃
---------------------- x ------------------------- = 187 moles NH₃
1 mole N₂
According to Le Châtelier's principle, an increase in temperature will shift the equilibrium position toward the products in an endothermic reaction.
True
False
The statement "According to Le Châtelier's principle, an increase in temperature will shift the equilibrium position toward the products in an endothermic reaction" is definitely true.
What is Le Châtelier's principle?Le Châtelier's principle may be defined as transformations in the temperature, pressure, volume, or concentration of a system that will lead to observable and conflicting changes in the strategy in order to accomplish a refreshed equilibrium state.
According to Le Châtelier's principle, an increase in temperature generates the equilibrium to move in the direction of the product of the endothermic reaction, and the decrease in the temperature rationales the equilibrium to move in the direction of the product of the exothermic reaction.
Therefore, it is well described above.
To learn more about Le Châtelier's principle, refer to the link:
https://brainly.com/question/2943338
#SPJ1
The reaction of nitrogen(g) with hydrogen(g) to form ammonia(g) proceeds as follows: N2(g) 3H2(g)2NH3(g) When 6.44 grams of N2(g) react with sufficient H2(g), 21.2 kJ of energy are evolved. What is the value of H for the chemical equation given
The enthalpy of the reaction is obtained as 4.876 kJ.
What is the enthalpy?The enthalpy of a reaction is the heat that is absorbed or emitted in a reaction.
Given the reaction; N2(g) + 3H2(g) ⇔2NH3(g);
Number of moles of N2 = 6.44 grams/28 g/mol
= 0.23 moles
If 1 mole of N2 releases 21.2 kJ of energy
0.23 moles of N2 releases 0.23 moles * 21.2 kJ /1 mole
= 4.876 kJ
Learn more about enthalpy:https://brainly.com/question/13996238?
#SPJ1
The products of __________ combustion are carbon monoxide, carbon and water. what one word completes this sentence?
Answer:
Complete combustion
Explanation:
To solve such this we must know the concept of combustion reaction. Therefore the products of complete combustion are carbon monoxide, carbon and water.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.
There are so many types of chemical reaction reaction like combustion reaction, acid base reaction, double displacement reaction, combustion reactions. The products of complete combustion are carbon monoxide, carbon and water. Large amount of heat is also released in combustion reaction
Therefore the products of complete combustion are carbon monoxide, carbon and water.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
What is the molar concentration of
a solution that contains
5.0 mol HCl in a total volume
of 10.0 L?
Answer:
0.5
Explanation:
5/10=0.5
An unidentified element has one electron in the outer most shell. Explain what
characteristics you would expect this element to have? Your response should include
three or four sentences
Answer:
They are unstable as single atoms, but can become stable by losing or sharing their one valence electron.
Explanation:
hope it helps you and give me a brainliest
Escriba la formula de:
5) Ácido -3,3-dimetil-Pentinoico
6) 3-etil-6-Heptenoato de propilo
7) Bromuro de 2,3,3-trimetil--5--Hexenoilo
8) N,N-dimetil-2-metil-3-fenil-Butanamida
9) 2-etil-2,5-Octadienal
10) 2,3,3-trimetil-5-Hexinamida
Answer:
Translate your language to Englishvalance shell example..
Answer:
Oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell.Valence electrons are the electrons in the outermost shell, or energy level, of an atom. Configuration of oxygen's valence electrons as 2s²2p⁴.Explanation:
#Let's Study
#I Hope It's Help
#Keep On Learning
#Carry On Learning
[tex]\\ \green{MaggieEve}[/tex]
What are chloroethane's conditions?
Please help me
Thanks
Explanation:
Hi there!
Chloroethane requires atleast one chlorine in ethane. It's general formula is CnH2n+1Cl. It mean it must have 2 carbons, 5 hydrogens and atleast one chlorine.
In addition, carbon-carbon bond must be single and chlorine is attached to either carbons. The carbon of this compound is SP³ hybridized and has bond angle of 120°.
Hope it helps!
Which quantity is held constant for Boyle's law, Gay-Lussac's law, and Charles's law?
volume
mass
temperature
pressure
Boyle's law: in Boyle's law, pressure of a gas in inversely proportional to the volume while the temperature is shield constant
TemperatureGay-Lussac's law: In Gay-Lussac's law, pressure of a gas in directly proportional to the temperature while the volume is held constant.
VolumeCharles's law: In Charles's law, the volume of a gas is directly proportional to the temperature while the pressure is held constant.
PressureWhat are two ways in which the safe house of lean might influence a product owner?
The safe house of lean might influence a product owner to provide better customer service.
What is the main purpose of safe house of lean?The safe house of lean is designed to provide ultimate value to the customer one the shortest possible time.
Employing the safe house of lean might influence the product owner in the following two ways:
enable the product ownerr work together with Agile Teams to develop stories with clear acceptance criteria.assist Agile Teams gain a clear understanding of their customers and how best to serve them.Therefore, the safe house of lean might influence a product owner to provide better customer service.
Learn more about customer service at: https://brainly.com/question/10714566
#SPJ12
In an endothermic reaction products are _____ in potential energy and _____ stable than reactants.
higher; more
lower; more
higher; less
lower; more
In an endothermic reaction, products are higher in potential energy and less stable than reactants.
What is an endothermic reaction?Endothermic reactions are those reactions that do not release heat but absorb heats, that's why the products are of higher potential energy and due to this they are less stable.
Thus, the correct option is C, higher; less.
Learn more about endothermic reaction
https://brainly.com/question/23184814
#SPJ1
A compound has an empirical formula C₂H4S.
What is its molecular formula, if its molar
mass is 168 g/mol?
This means that the molar mass of [tex]\text{C}_{2}\text{H}_{4}\text{S}[/tex] is
[tex]2(12.011)+4(1.00794)+32.06=60.11376[/tex]
Dividing this by the given molar mass, we get [tex]\frac{168}{60.11376} \approx 3[/tex]
So, the molecular formula is about [tex]\boxed{\text{C}_{6}\text{H}_{12}\text{S}_{3}}[/tex]
eggs do not contain sugar. Explain why they have such high energy values.
Answer:
becuz they have protien inside them dumy its easy
Answer:
because they have protein inside them dummy its easy therefore they did not have sugar
Explanation:
What is the si unit if sound
Explanation:
The SI Unit of sound is decibel.
or we can say that
The SI Unit of sound is watt per square metre (i.e.w/m2).
