A 550 kg dragster accelerates from rest to a final speed of 110 m/s in 400 m (about a quarter of a mile) and encounters an average frictional force of 1200 N. What is its average power output in watts and horsepower if this takes 7.30 s

Answers

Answer 1

Answer:

[tex]52.25\times10^4W\\699.1 hp[/tex]

Explanation:

According to the energy conversation:

ΔK=[tex]-f_kd+W[/tex]

ΔK=[tex]K_f-K_i ; K=1/2 mv^2[/tex]

where,

[tex]k_i, k_f[/tex] are initial and final kinetic energy of the system.

[tex]v_i[/tex]= initial velocity of the system

[tex]v_f[/tex]=final velocity of the system

W= total work done on the system

[tex]f_k[/tex]= friction force

d= distance traveled

Given: [tex]v_f[/tex]=110m/s

d=400m

[tex]f_k[/tex]=1200N

[tex]v_i[/tex]=0m/s

t=7.3s

ΔK=[tex]-f_kd+W[/tex]

W= ΔK + [tex]f_kd[/tex]

  =[tex]K_f-K_i+f_kd\\[/tex]

  [tex]=1/2 mv_f^2-1/2 mv_i^2+f_kd\\=\frac{1}{2} \times 550\times110^2 - \frac{1}{2} \times 550\times0^2+ (1200\times400)\\=3807500[/tex]

[tex]P=\frac{W}{t} =\frac{3807500}{7.3} \\P=52.15 \times10^4w\\P=\frac{52.15 \times10^4}{746} \\P=699.1 hp[/tex]


Related Questions

While her kid brother is on a wooden horse at the edge of a merry-go-round, Sheila rides her bicycle parallel to its edge. The wooden horses have a tangential speed of 6 m/s. Sheila rides at 4 m/s. The radius of the merry-go-round is 8 m. At what time intervals does Sheila encounter her brother, if she rides opposite to the direction of rotation of the merry-go-round?
a. 5.03 s
b. 8.37 s
c. 12.6 s
d. 25.1 s
e. 50.2 s

Answers

Answer:

t = 5.03 s

Explanation:

To find the time interval when Sheila encounter her brother, you first calculate the angular speed of both Sheila and her brother.

You use the following formula:

[tex]\omega = \frac{v}{r}[/tex]

w: angular speed

v: tangential speed

r: radius of the trajectory = 8 m

For  you have:

[tex]\omega=\frac{4m/s}{8m}=0.5\frac{rad}{s}[/tex]

For her brother:

[tex]\omega'=\frac{6m/s}{8m}=0.75\frac{rad}{s}[/tex]

Next, they will encounter to each other when the angular distance of the Brother of sheila equals the angular distance of Sheila in the opposite direction. This can be written as follow:

[tex]\theta=\omega t\\\\\theta'=\omega ' t[/tex]

They encounter for θ = 2π-θ':

[tex]\omega t=2\pi-\omega' t[/tex]

You replace the values of the parameters in the previous equation and solve for t:

[tex]0.5t=2\pi-0.75t\\\\1.25t=2\pi\\\\t=5.026\approx5.03[/tex]

Hence, Sheila encounter her brother in 5.03 s

An automobile being tested on a straight road is 400 feet from its starting point when the stopwatch reads 8.0 seconds and is 550 feet from the starting point when the stopwatch reads 10.0 seconds.
A. What was the average velocity of the automobile during the interval from t = 10.0 seconds to t = 8.0 seconds
B. What was the average velocity of the automobile during the interval from t - Ostot - 10.0 s? (Assume that the stopwatch read t = 0 and started at the same time as the auto.)
C. If the automobile averages 100 ft/s from t - 10.0 stot - 20.0 s, what distance does it travel during this interval?
D. The automobile has a special speedometer calibrated in feet/s instead of in miles/hour. Att 85 the speedometer reads 65 ft/s; and at t = 10 s it reads 80 ft/s. What is the average acceleration during this interval?

Answers

Answer:

a)   v = 75 ft / s , b)  v = 55 ft / s , c)   Δx = 1000 ft

Explanation:

We can solve this exercise with the expressions of kinematics

a) average speed is defined as the distance traveled in a given time interval

        v = (x₂-x₁) / (t₂-t₁)

         v = (550 - 400) / (10 -8)

         v = 75 ft / s

b) we repeat the calculations for this interval

   v = (550 - 0) / (10 -0)

   v = 55 ft / s

c)  we clear the distance from the average velocity equation

     Δx = v (t₂ -t₁)

     Δx = 100 (20-10)

     Δx = 1000 ft

Assuming 100% efficient energy conversion, how much water stored behind a 50
centimeter high hydroelectric dam would be required to charge the battery?

Answers

Answer:

Explanation:

The power rating of the battery isn't provided. But let us assume that it is one of the common batteries with ratings of 12 V and 50 A.h

Potential energy possessed by water at that height = mgh

m = mass of the water = ρV

ρ = density of water = 1000 kg/m³

V = volume of water = ?

g = acceleration due to gravity = 9.8 m/s²

h = height of water = 50 cm = 0.5 m

Potential energy = ρVgh = 1000 × V × 9.8 × 0.5 = (4900V) J

Energy of the battery = qV

q = 50 A.h = 50 × 3600 = 180,000 C

V = 12 V

qV = 180,000 × 12 = 2,160,000 J

Energy = 2,160,000 J

At a 100% conversion rate, the energy of the water totally powers the battery

(4900V) = (2,160,000)

4900V = 2,160,000

V = (2,160,000/4900)

V = 440.82 m³

Hence, with our assumed power ratings for the battery (12 V and 50 A.h), 440.82 m³ of water at the given height of 50 cm would power the battery.

Incase the power ratings of the battery in the complete question is different, this solution provides you with how to obtain the correct answer, given any battery power rating.

Hope this Helps!!!

Engineers and science fiction writers have proposed designing space stations in the shape of a rotating wheel or ring, which would allow astronauts to experience a sort of artificial gravity when walking along the inner wall of the station's outer rim. (a) Imagine one such station with a diameter of 104 m, where the apparent gravity is 2.20 m/s2 at the outer rim. How fast is the station rotating in revolutions per minute

Answers

Answer:

f = 1.96 revolutions per minute

Explanation:

The formula for the the frequency of revolution of a satellite, to develop an artificial gravity, with the help of centripetal acceleration is given as follows:

f = (1/2π)√(ac/r)

where,

f = frequency of rotation = ?

ac = centripetal acceleration= apparent gravity or artificial gravity = 2.2 m/s²

r = radius of station or satellite = diameter/2 = 104 m/2 = 52 m

Therefore,

f = (1/2π)√[(2.2 m/s²)/(52 m)]

f = (0.032 rev/s)(60 s/min)

f = 1.96 revolutions per minute

A student is given a small object that is hanging from a ring stand on a nylon thread. The student attempts to charge the object electrically in several ways. Based upon his results, he concludes the object is made of an insulating material. Which set of results must he have collected?

A. The object could be charged only by contact.

B. The object could be charged by either contact or induction.

C. The object could be charged by either contact or polarization.

D. The object could be charged only by polarization.

Answers

Answer:(a)

Explanation:

Student must have known that insulators can only be charged when they are rubbed against each other. In this process, one becomes electrically negative while other becomes electrically positive such that both have the same magnitude. The one which gains electrons becomes electrically negative due to the transfer of electrons while others lose the electron becomes positive due to the transfer of an electron to another body.

0.92 kg of R-134a fills a 0.14-m^3 weighted piston–cylinder device at a temperature of –26.4°C. The container is now heated until the temperature is 100°C. Determine the final volume of R-134a.

Answers

Answer:

The final volume of R-134a is 0.212m³

Explanation:

Using one of the general gas equation to find the final volume of the R-134a.

According to pressure law; The volume of a given mas of gas is directly proportional to its temperature provided that the pressure remains constant.

VαT

V = kT

k = V/T

V1/T1 = V2/T2 = k

Given V1 = 0.14-m³ at T1 = –26.4°C = –26.4° + 273 = 246.6K

V2 = ? at T = 100°C = 100+273 = 373K

On substituting this values for T2;

0.14/246.6 = V2/373

373*0.14 = 246.6V2

V2 = 373*0.14 /246.6

V2 = 0.212m³

The final volume of R-134a is 0.212m³

Constants Canada geese migrate essentially along a north-south direction for well over a thousand kilometers in some cases, traveling at speeds up to about 100 km/h. The one goose is flying at 100 km/h relative to the air but a 44 km/h wind is blowing from west to east.
1. At what angle relative to the north-south direction should this bird head so that it will be traveling directly southward relative to the ground?2. How long will it take the bird to cover a ground distance of 450 from north to south?

Answers

Answer:

a. 63.89°  in the north-southward manner

b.  2.2 sec

Explanation:

The goose is flying at 100 km/h

Air from east to west is 44 km/h

angle relative to the north-south direction for the bird to travel south will be

cos∅ = 44/100 = 0.44

∅ = [tex]cos^{-1}[/tex]0.44 = 63.89°  in the north-southward manner

Speed south relative to the ground will be v

Tan 63.89 = v/100

2.04 = v/100

v = 2.04 x 100 = 204 km/hr

to cover a distance of 450 m from north to south at this speed time will be

t = d/v = 450/204 = 2.2 sec

Tech A says that as engines gain miles, the spark plug gap increases, which raises the ignition system’s available voltage. Tech B says that misfire occurs when required voltage is higher than available voltage. Who is correct? Group of answer choices

Answers

Answer: Tech A is correct

Explanation:

Every vehicle has ignition system and without this system,it will not work. The battery of everything vehicle contain energy that start the vehicle and ignore it to start working. Electrical current move from the vehicle's battery and get to the induction coil, the induction coil increases the voltage in it so that the plug will be ignited. The spark plugs produce fire. The spark plug is connected to the ignition system. Once voltage is produced from the induction coil, electrical impulses move from induction coil to insulated plug wires. The spark plug need a very high voltage from the small voltage battery. Once the high voltage exceed the dielectric strength of the gases, spark jump the gap between the plug's fire end.

Two identical objects are pressed against two different springs so that each spring stores 55.0J of potential energy. The objects are then released from rest. One spring is quite stiff (hard to compress), while the other one is quite flexible (easy to compress).Which of the following statements is or are true? (More than one statement may be true.)A. Both objects will have the same maximum speed after being released.B. The object pressed against the stiff spring will gain more kinetic energy than the other object.C. Both springs are initially compressed by the same amount.D. The stiff spring has a larger spring constant than the flexible spring.E. The flexible spring must have been compressed more than the stiff spring.

Answers

Answer:

A , D , E

Explanation:

Solution:-

- Consider the two identical objects with mass ( m ).

- The stiffness of the springs are ( k1 and k2 ).

- Both the spring store 55.0 J of potential energy.

- We will apply the principle of energy conservation on both the systems. In both cases the spring stores 55.0 Joules of energy. Once released, the objects gain kinetic energy with a consequent loss of potential energy in either spring.

- The maximum speed ( v ) is attained when all the potential energy is converted to kinetic energy.

- Apply Energy conservation for spring with stiffness ( k1 ).

                         ΔU = ΔEk

                         55.0 = 0.5*m*v^2

                         v = √ ( 110 / m )

- Apply Energy conservation for spring with stiffness ( k2 ).

                         ΔU = ΔEk

                         55.0 = 0.5*m*v^2

                         v = √ ( 110 / m )

Answer: Both objects will have the same maximum speed ( A )

- We are told that one spring is more stiff as compared to the other one. The measure of stiffness is proportionally quantified by the spring constant. To mathematically express we can write it as:

                         k1 > k2

Where,

                 k1: The stiff spring

                 k2: The flexible spring

Answer: The stiff spring has a larger spring constant than the flexible spring. ( D )

- We will assume that the spring with constant ( k1 ) undergoes a displacement ( x1 ) and the spring with constant ( k2 ) undergoes a displacement ( x2 ). The potential energy stored in both spring is the same. Hence,

                      U1 = U2

                      0.5*( k1 ) * ( x1 )^2 = 0.5*( k2 ) * ( x2 )^2

                      [ k1 / k2 ] = [ x2 / x1 ]^2

Since,

                     k1 > k2 , then [ k1 / k2 ] > 1    

Then,

                     [ x2 / x1 ]^2 > 1

                     [ x2 / x1 ] > 1

                     x2 > x1                  

Answer: The flexible spring ( x2 ) was compressed more than the stiff spring ( x1 ). ( E )

The friends now feel ready to try a problem. Suppose an Atwood machine has a mass of m1 = 2.5 kg and another mass of m2 = 8.5 kg hanging on opposite sides of the pulley. Assume the pulley is massless and frictionless, and the cord is ideal. Determine the magnitude of the acceleration of the two objects and the tension in the cord.

Answers

Answer:

a = 5.34 m/s²

T = 37.86 N

Explanation:

This is the case where two masses are hanging vertically on sides of the pulley. In such case, the formula for acceleration of objects is derived to be:

a = g(m₂ - m₁)/(m₂ + m₁)

where,

a = acceleration of both masses = ?

g = 9.8 m/s²

m₂ = heavier mass = 8.5 kg

m₁ = lighter mass = 2.5 kg

Therefore,

a = (9.8 m/s²)(8.5 kg - 2.5 kg)/(8.5 kg + 2.5 kg)

a = (9.8 m/s²)(6 kg)/(11 kg)

a = 5.34 m/s²

The formula for tension in cable is derived to be:

T = 2m₁m₂g/(m₁ + m₂)

T = (2)(2.5 kg)(8.5 kg)(9.8 m/s²)/(2.5 kg + 8.5 kg)

T = 37.86 N


Our Sun shines bright with a luminosity of 3.828 x 1025 Watt. Her energies
responsible for many processes and the habitable temperatures on the earth that
make our life possible.
a) Calculate the amount of energy arriving on the Earth in a single day
b) To how many litres of heating oil (energy density 37.3 x 10^6 J/litre is the equivalent?
C) The Earth reflects 30% of this energy : Determine the temperature on Earth's sufact
d) what other factors should be considered to get an even more precisa temperature postiache
Note: The Earth's radius is 6370km; the Sun's sadius is 696 ×10^3km, I AU is 1.495 × 10^8km)​

Answers

Answer:

a)   E = 1.58 10²¹ J , b) Oil = 4,236 107 liter ,  e)   T = 54.3 C

Explanation:

a) To calculate the energy that reaches Earth, let us combine that the power emitted by the Sun is distributed uniformly on a spherical surface

     I = P / A

     A = 4π r²

in this case the radius of the sphere is the distance from the Sun to Earth r = 1.5 10¹¹ m

     I = P / A

     I = P / 4π r²

let's calculate

     I = 3,828 10²⁵/4 pi (1.5 10¹¹)²

     I = 1.3539 10²W / m² = 135.4 W / m2

the energy that reaches the disk of the Earth is

    E = I A

the area of ​​a disc

    A = π r²

    E = I π r²

where r is the radius of the Earth 6.37 10⁶ m

     E = 135.4 π(6.37 10⁶)

     E = 1,726 10¹⁶ W

This is the energy per unit of time that reaches Earth

    t = 1 dai (24h / 1day) (3600s / 1h) = 86400 s

     

    E = 1,826 10¹⁶ 86400

     E = 1.58 10²¹ J

b) for this part we can use a direct proportions rule

      Oil = 1.58 10²¹ (1 / 37.3 10⁶)

      Oil = 4,236 10⁷ liter

c) to silence the surface temperature of the Earth we use the Stefan-Bolztman Law

       P = σ A e T⁴

       T = [tex]\sqrt[4]{P/Ae}[/tex]

nos indicate the refect, therefore the amount of absorbencies

       P_absorbed = 0.7 P

let's calculate

       T = REA (0.7 1.58 1021 / [pi (6.37 106) 2 1)

       T = RER (8,676 106)

       T = 54.3 C

b) Among the other factors that must be taken into account is the greenhouse effect, due to the absorption of gases from the atmosphere

A jet plane is flying at a constant altitude. At time t1=0t 1=0, it has components of velocity vx=90m/s,vy=110m/sv x = 90m/s,v y=110m/s. At time t2=30.0st 2=30.0s, the components are vx=−170m/s,vy=40m/sv x =−170m/s,v y=40m/s.
(a) Sketch the velocity vectors at t1and t2.
How do these two vectors differ? For this time interval calculate
(b) the components of the average acceleration, and
(c) the magnitude and direction of the average acceleration.

Answers

The average acceleration [tex]\vec a_{\rm ave}[/tex] over some time interval [tex][t_1,t_2][/tex] is equal to the ratio of the change in velocity [tex]\vec v_2-\vec v_1[/tex] over the duration of the interval [tex]t_2-t_1[/tex], or

[tex]\vec a_{\rm ave}=\dfrac{\Delta\vec v}{\Delta t}=\dfrac{\vec v_2-\vec v_1}{t_2-t_1}[/tex]

which can be split into the [tex]x[/tex] and [tex]y[/tex] components as

[tex]a_{\rm{ave},x}=\dfrac{v_{2,x}-v_{1,x}}{t_2-t_1}=\dfrac{-170\frac{\rm m}{\rm s}-90\frac{\rm m}{\rm s}}{30.0\,\mathrm s-0}\approx-8.67\dfrac{\rm m}{\mathrm s^2}[/tex]

[tex]a_{\rm{ave},y}=\dfrac{v_{2,y}-v_{1,y}}{t_2-t_1}=\dfrac{40\frac{\rm m}{\rm s}-110\frac{\rm m}{\rm s}}{30.0\,\mathrm s-0}\approx-2.33\dfrac{\rm m}{\mathrm s^2}[/tex]

The magnitude of this average acceleration is

[tex]\left\|\vec a_{\rm ave}\right\|=\sqrt{{a_{\rm{ave},x}}^2+{a_{\rm{ave},y}}^2}\approx8.98\dfrac{\rm m}{\mathrm s^2}[/tex]

and its direction is [tex]\theta[/tex] such that

[tex]\tan\theta=\dfrac{a_{\rm{ave},y}}{a_{\rm{ave},x}}\implies\theta\approx-164.9^\circ[/tex]

which corresponds to a direction of about 15.1º South of West.

An aluminum "12 gauge" wire has a diameter d of 0.205 centimeters. The resistivity ρ of aluminum is 2.75×10−8 ohm-meters. The electric field in the wire changes with time as E(t)=0.0004t2−0.0001t+0.0004 newtons per coulomb, where time is measured in seconds.

Answers

Complete Question

An aluminum "12 gauge" wire has a diameter d of 0.205 centimeters. The resistivity ρ of aluminum is 2.75×10−8 ohm-meters. The electric field in the wire changes with time as E(t)=0.0004t2−0.0001t+0.0004 newtons per coulomb, where time is measured in seconds.

I = 1.2 A at time 5 secs.

Find the charge Q passing through a cross-section of the conductor between time 0 seconds and time 5 seconds.

Answer:

The charge is  [tex]Q =2.094 C[/tex]

Explanation:

From the question we are told that

    The diameter of the wire is  [tex]d = 0.205cm = 0.00205 \ m[/tex]

     The radius of  the wire is  [tex]r = \frac{0.00205}{2} = 0.001025 \ m[/tex]

     The resistivity of aluminum is [tex]2.75*10^{-8} \ ohm-meters.[/tex]

       The electric field change is mathematically defied as

         [tex]E (t) = 0.0004t^2 - 0.0001 +0.0004[/tex]

     

Generally the charge is  mathematically represented as

       [tex]Q = \int\limits^{t}_{0} {\frac{A}{\rho} E(t) } \, dt[/tex]

Where A is the area which is mathematically represented as

       [tex]A = \pi r^2 = (3.142 * (0.001025^2)) = 3.30*10^{-6} \ m^2[/tex]

 So

       [tex]\frac{A}{\rho} = \frac{3.3 *10^{-6}}{2.75 *10^{-8}} = 120.03 \ m / \Omega[/tex]

Therefore

      [tex]Q = 120 \int\limits^{t}_{0} { E(t) } \, dt[/tex]

substituting values

      [tex]Q = 120 \int\limits^{t}_{0} { [ 0.0004t^2 - 0.0001t +0.0004] } \, dt[/tex]

     [tex]Q = 120 [ \frac{0.0004t^3 }{3} - \frac{0.0001 t^2}{2} +0.0004t] } \left | t} \atop {0}} \right.[/tex]

From the question we are told that t =  5 sec

           [tex]Q = 120 [ \frac{0.0004t^3 }{3} - \frac{0.0001 t^2}{2} +0.0004t] } \left | 5} \atop {0}} \right.[/tex]

          [tex]Q = 120 [ \frac{0.0004(5)^3 }{3} - \frac{0.0001 (5)^2}{2} +0.0004(5)] }[/tex]

         [tex]Q =2.094 C[/tex]

     

The charge (Q) passing through a cross-section of the conductor between time 0 seconds and time 5 seconds is 2.094 Coulomb.

Given the following data:

Diameter of wire = 0.205 centimeters.Resistivity of aluminum = [tex]2.75\times 10^{-8}[/tex] Ohm-meters.[tex]E(t)=0.0004t^2-0.0001t+0.0004[/tex] Newton per coulomb.

Conversion:

Diameter of wire = 0.205 cm to m = 0.00205 meter.

Radius = [tex]\frac{Diameter}{2} =\frac{0.00205}{2} =0.001025\;meter[/tex]

To determine the charge (Q) passing through a cross-section of the conductor between time 0 seconds and time 5 seconds, we would apply Gauss's law in an electric field for a surface charge:

First of all, we would find the area of the wire.

[tex]Area = \pi r^2\\\\Area = 3.142 \times 0.001025^2\\\\Area = 3.3 \times 10^{-6}\;m^2[/tex]

Mathematically, Gauss's law in an electric field for a surface charge is given by the formula:

[tex]Q = \int\limits^t_0 {\frac{A}{\rho } E(t)} \, dt[/tex]

Where:

A is the area of a conductor.[tex]\rho[/tex] is the resistivity of a conductor.t is the time.E is the electric field.

Substituting the given parameters into the formula, we have;

[tex]Q= \int\limits^t_0 {\frac{3.3 \times 10^{-6}}{2.75\times 10^{-8} } (0.0004t^2-0.0001t+0.0004)} \, dt\\\\Q=120\int\limits^t_0 1{ (0.0004t^2-0.0001t+0.0004)} \, dt[/tex]

[tex]Q=120(\frac{0.0004t^3}{3} -\frac{0.0001t^2}{2} +0.0004t |\left{5} \atop {0} \right[/tex]

When t = 5 seconds:

[tex]Q=120(\frac{0.0004[5]^3}{3} -\frac{0.0001[5]^2}{2} +0.0004[5])\\\\Q=120(\frac{0.03}{3} -\frac{0.0025}{2} +0.002)\\\\Q=120(0.0167-0.00125+0.002)\\\\Q=120(0.01745)[/tex]

Q = 2.094 Coulomb.

Find more information: https://brainly.com/question/18214726

A 3 kg mass object is pushed 0.6 m into a spring with spring constant 210 N/m on a frictionless horizontal surface. Upon release, the object moves across the surface until it encounters a rough incline. The object moves UP the incline and stops a height of 1.5 m above the horizontal surface.
(a) How much work must be done to compress the spring initially?
(b) Compute the speed of the mass at the base of the incline.
(c) How much work was done by friction on the incline?

Answers

Answer with Explanation:

We are given that

Mass of spring,m=3 kg

Distance moved by object,d=0.6 m

Spring constant,k=210N/m

Height,h=1.5 m

a.Work done  to compress the spring initially=[tex]\frac{1}{2}kx^2=\frac{1}{2}(210)(0.6)^2=37.8J[/tex]

b.

By conservation law of energy

Initial energy of spring=Kinetic energy  of object

[tex]37.8=\frac{1}{2}(3)v^2[/tex]

[tex]v^2=\frac{37.8\times 2}{3}[/tex]

[tex]v=\sqrt{\frac{37.8\times 2}{3}}[/tex]

v=5.02 m/s

c.Work done by friction on the incline,[tex]w_{friction}=P.E-spring \;energy[/tex]

[tex]W_{friction}=3\times 9.8\times 1.5-37.8=6.3 J[/tex]

A worker with spikes on his shoes pulls on rope that is attached to a box that is resting on a flat, frictionless frozen lake. The box has mass m, and the worker pulls with a constant tension T at an angle θ = 40 ∘ above the horizontal. There is a strong headwind on the lake, which produces a horizontal force Fw that is pointed in the opposite direction than the box is being pulled. Draw a free-body diagram for this system. Assume that the worker pulls the box to the right. If the wind force has a magnitude of 30 N, with what tension must the worker pull in order to move the box at a constant velocity?

Answers

Answer:

a

The free body diagram is shown on the first uploaded image

b

The tension on the rope is  [tex]T=39.16 \ N[/tex]  

Explanation:

From the  question we are told that

    The mass of the box is  m

    The tension on the box is  T

     The angle at which it is pulled is  [tex]\theta = 40^o[/tex]

     The force produced by the strong head wind is [tex]Fw = 30 \ N[/tex]

At equilibrium the net force acting on the block along the horizontal axis is zero i.e

     [tex]Tcos \theta -F_w = 0[/tex]

substituting values

     [tex]Tcos (40) -30 = 0[/tex]

     [tex]Tcos (40) = 30[/tex]

     [tex]T(0.76604)) = 30[/tex]

     [tex]T=39.16 \ N[/tex]      

Which of the followings is true about EMF?

a. an induced emf is caused by a changing magnetic flux.
b. an emf can only be induced in a conducting loop by moving the loop through an area that has a constant magnetic field.
c. an induced emf can be observed by measuring the current that is created.
d. an induced emf and conventional induced current are in opposite directions.

Answers

Answer:

a. TRUTH

b. FALSE

c. TRUTH

d. FALSE

Explanation:

The emf (electromagnetic force) is generated in a loop or solenoid by the change in the magnetic flux in a closed conductor path (for example, a wire).

This can be noted in the following formula, which is known as the Lenz's law:

[tex]emf=-N\frac{d\Phi_B}{dt}=-N\frac{d(AB)}{dt}[/tex]   (1)

Then, the change, in time, of the area of the conductor, or the change in the magnitude of the magnetic field, the induced emf acquires different values. Furthermore, the loops have a resistance, then, a current can be measured when an emf is induced.

Based on this information you have:

a. an induced emf is caused by a changing magnetic flux. TRUTH

b. an emf can only be induced in a conducting loop by moving the loop through an area that has a constant magnetic field. FALSE

c. an induced emf can be observed by measuring the current that is created. TRUTH

d. an induced emf and conventional induced current are in opposite directions. TRUTH (the minus sing in the equation (1) )

Consider a weather balloon floating in the air. There are three forces acting on this balloon: the force of gravity is FG, the force from lift towards balloon is FL, and the force from the wind is labeled Fw. The orientation of these forces along with a coordinate system is given below:

Assume that || FG || = 20 N, || FL ||= 25 N, and || Fw ll = 15 N.

Required:
Find the magnitude of the resultant force acting on the weather balloon and round your answer to two decimal places.

Answers

Hey I just got home from work

b) A non-inductive load takes a current of 15 A at 125 V. An inductor is then connected
in series in order that the same current shall be supplied from 240 V, 50 Hz mains.
Ignore the resistance of the inductor and calculate:
i. the inductance of the inductor;
ii. the impedance of the circuit;

iii. the phase difference between the current and the applied voltage.

Assume the waveform to be sinusoidal.

Answers

Answer:

i. 43.5 mH ii.  16 Ω. In phasor form Z = (8.33 + j13.66) Ω iii 58.64°

Explanation:

i. The resistance , R of the non-inductive load R = 125 V/15 A = 8.33 Ω

The reactance X of the inductor is X = 2πfL where f = frequency = 50 Hz.

So, x = 2π(50)L = 100πL Ω = 314.16L Ω

Since the current is the same when the 240 V supply is applied, then

the impedance Z = √(R² + X²) = 240 V/15 A

√(R² + X²) = 16 Ω

8.33² + X² = 16²

69.3889 + X² = 256

X² = 256 - 69.3889

X² = 186.6111

X = √186.6111

X = 13.66 Ω

Since X = 314.16L = 13.66 Ω

L = 13.66/314.16

= 0.0435 H

= 43.5 mH

ii. Since the same current is supplied in both circuits, the impedance Z of the circuit is Z = 240 V/15 A = 16 Ω.

So in phasor form Z = (8.33 + j13.66) Ω

iii. The phase difference θ between the current and voltage is  

θ = tan⁻¹X/R

= tan⁻¹(314.16L/R)

= tan⁻¹(314.16 × 0.0435 H/8.33 Ω)

= tan⁻¹(13.66/8.33)

= tan⁻¹(1.6406)

= 58.64°

Some types of spiders build webs that consist of threads made of dry silk coated with a solution of a variety of compounds. This coating leaves the threads, which are used to capture prey, hygroscopic - that is, they attract water from the atmosphere. It has been hypothesized that this aqueous coating makes the threads good electrical conductors. To test the electrical properties of coated thread, researchers placed a 5-mm length of thread between two electrical contacts. The researchers stretched the thread in 1-mm increments to more than twice its original length, and then allowed it to return to its original length, again in 1-mm increments. Some of the resistance measurements are shown.If the conductivity of the thread results from the aqueous coating only, how does the cross-sectional area A of the coating compare when the thread is 13 mm long versus the starting length of 5 mm? Assume that the resistivity of the coating remains constant and the coating is uniform along the thread.If the conductivity of the thread results from the aqueous coating only, how does the cross-sectional area of the coating compare when the thread is 13 long versus the starting length of 5 ? Assume that the resistivity of the coating remains constant and the coating is uniform along the thread.A13mm is about 1/10 A5mm.A13mm is about 1/4 A5mm. === correct answer... I figured it out. R = pL/A. L is 2.5 times. Therefore, A must be 1/4 times.A13mm is about 2/5 A5mm.A13mm is the same as A5mm.

Answers

Answer:

A13 mm is about 1/4 A5 mm

Explanation:

Find the attachment

Julie throws a ball to her friend Sarah. The ball leaves Julie's hand a distance 1.5 meters above the ground with an initial speed of 16 m/s at an angle 32 degrees; with respect to the horizontal. Sarah catches the ball 1.5 meters above the ground.
1) What is the horizontal component of the ball’s velocity when it leaves Julie's hand?
2) What is the vertical component of the ball’s velocity when it leaves Julie's hand?
3) What is the maximum height the ball goes above the ground?
4) What is the distance between the two girls?
5) How high above the ground will the ball be when it gets to Julie? (note, the ball may go over Julie's head.)

Answers

Answer:

Explanation:

1.  [tex]V_{x}[/tex] = [tex]V_{0}[/tex] * cos[tex]\alpha[/tex] ⇒ 16*cos32 ≈ 13.6 m/s (13.56)

2. [tex]V_{y}[/tex] = [tex]V_{0}[/tex] * sin[tex]\alpha[/tex] ⇒ 16* sin32 ≈ 9.4 m/s

3. [tex]y_{max}[/tex] = [tex]\frac{v_{0}^2*sin^2\alpha}{2g}[/tex]= [tex]\frac{16^2*sin^232}{2*9.8}[/tex] (the g (gravity) depends on the country but i'll take the average g which is 9.2m/s^2)

[tex]y_{max}[/tex] ≈ 3.6677+1.5 ≈ 5.2m

4.  [tex]x_{max}[/tex] = [tex]\frac{v_{0}^2*sin(2\alpha)}{g}[/tex]=[tex]\frac{16^2*sin(2*32)}{9.8}[/tex] ≈ 23.5m (23.47)

5. -

answer 4 could be wrong, not certain about that one and i don't know 5

A projectile is launched on the Earth with a certain initial velocity and moves without air resistance. Another projectile is launched with the same initial velocity on the Moon, where the acceleration due to gravity is one-sixth as large. How does the maximum altitude of the projectile on the Moon compare with that of the projectile on the Earth?

Answers

With smaller gravitational forces and therefor less vertical acceleration, the projectile launched on the moon ... with the same initial speed and direction ...

-- climbs faster,

-- spends more time climbing,

-- reaches a higher peak,

-- falls slower,

-- spends more time falling, and

-- covers more horizontal distance

than the projectile launched on the Earth.

This is not because of air resistance.  It would be true even if there were no air resistance on the Earth.  It's entirely a gravity thing.  

Proposed Exercise - Mass Center of a Composite Body Determine the coordinates (x, y) of the center of mass of the body illustrated in the picture below

Answers

Answer:

x = 3.76 cm

y = 3.76 cm

Explanation:

This composite shape can be modeled as a square (7.2 cm × 7.2 cm) minus a quarter circle in the lower left corner (3.6 cm radius) and a right triangle in the upper right corner (3.6 cm × 3.6 cm).

The centroid of a square (or any rectangle) is at x = b/2 and y = h/2.

The centroid of a quarter circle is at x = y = 4r/(3π).

The centroid of a right triangle is at x = b/3 and y = h/3.

Build a table listing each shape, the coordinates of its centroid (x and y), and its area (A).  Use negative areas for the shapes that are being subtracted.

Next, multiply each coordinate by the area (Ax and Ay), sum the results (∑Ax and ∑Ay), then divide by the total area (∑Ax / ∑A and ∑Ay / ∑A).  The result will be the x and y coordinates of the center of mass.

See attached image.

A diver shines light up to the surface of a flat glass-bottomed boat at an angle of 30° relative to the normal. If the index of refraction of water and glass are 1.33 and 1.5, respectively, at what angle (in degrees) does the light leave the glass (relative to its normal)?
A. 26
B. 35
C. 42
D. 22
E. 48

Answers

Answer:

35

Explanation:

According to snell's law which states that the ratio of the sin of incidence (i) to the angle of refraction(n) is a constant for a given pair of media.

sini/sinr = n

n is the constant = refractive index

Since the diver shines light up to the surface of a flat glass-bottomed boat, the refractive index n = nw/ng

nw is the refractive index of water and ng is that of glass

sini/sinr = nw/ng

given i = 30°, nw = 1.33, ng = 1.5, r = angle the light leave the glass

On substitution;

sin 30/sinr = 1.33/1.5

1.5sin30 = 1.33sinr

sinr = 1.5sin30/1.33

sinr = 0.75/1.33

sinr = 0.5639

r = arcsin0.5639

r ≈35°

angle the light leave the glass is 35°

The rate of heat conduction out of a window on a winter day is rapid enough to chill the air next to it. To see just how rapidly windows conduct heat, calculate the rate of conduction in watts through a 2.82 m2 window that is 0.675 cm thick if the temperatures of the inner and outer surfaces are 5.00°C and −10.0°C, respectively. This rapid rate will not be maintained — the inner surface will cool, and frost may even form. The thermal conductivity of glass is 0.84 J/(s · m · °C).

Answers

Answer:

Q = - 5264 W = - 5.26 KW

Here, negative sign indicates the outflow of heat

Explanation:

Fourier's Law of heat conduction, gives the following formula:

Q = - KAΔT/t

where,

Q = Rate of Heat Conduction out of window = ?

K = Thermal Conductivity of Glass = 0.84 W/m.°C

A =Surface Area of window = 2.82 m²

ΔT = Difference in Temperature of both sides of surface

ΔT = Inner Surface Temperature - Outer Surface Temperature= 5°C - (- 10°C)

ΔT = 15°C

t = thickness of window = 0.675 cm = 0.00675 m

Therefore,

Q = - (0.84 W/m.°C)(2.82 m²)(15°C)/0.00675 m

Q = - 5264 W = - 5.26 KW

Here, negative sign indicates the outflow of heat.

A flock of ducks is trying to migrate south for the winter, but they keep being blown off course by a wind blowing from the west at 5.0 m/s . A wise elder duck finally realizes that the solution is to fly at an angle to the wind.If the ducks can fly at 7.0 m/s relative to the air, what direction should they head in order to move directly south?

Answers

The ducks' flight path as observed by someone standing on the ground is the sum of the wind velocity and the ducks' velocity relative to the wind:

ducks (relative to wind) + wind (relative to Earth) = ducks (relative to Earth)

or equivalently,

[tex]\vec v_{D/W}+\vec v_{W/E}=\vec v_{D/E}[/tex]

(see the attached graphic)

We have

ducks (relative to wind) = 7.0 m/s in some direction θ relative to the positive horizontal direction, or

[tex]\vec v_{D/W}=\left(7.0\dfrac{\rm m}{\rm s}\right)(\cos\theta\,\vec\imath+\sin\theta\,\vec\jmath)[/tex]

wind (relative to Earth) = 5.0 m/s due East, or

[tex]\vec v_{W/E}=\left(5.0\dfrac{\rm m}{\rm s}\right)(\cos0^\circ\,\vec\imath+\sin0^\circ\,\vec\jmath)[/tex]

ducks (relative to earth) = some speed v due South, or

[tex]\vec v_{D/E}=v(\cos270^\circ\,\vec\imath+\sin270^\circ\,\vec\jmath)[/tex]

Then by setting components equal, we have

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta+5.0\dfrac{\rm m}{\rm s}=0[/tex]

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]

We only care about the direction for this question, which we get from the first equation:

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta=-5.0\dfrac{\rm m}{\rm s}[/tex]

[tex]\cos\theta=-\dfrac57[/tex]

[tex]\theta=\cos^{-1}\left(-\dfrac57\right)\text{ OR }\theta=360^\circ-\cos^{-1}\left(-\dfrac57\right)[/tex]

or approximately 136º or 224º.

Only one of these directions must be correct. Choosing between them is a matter of picking the one that satisfies both equations. We want

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]

which means θ must be between 180º and 360º (since angles in this range have negative sine).

So the ducks must fly (relative to the air) in a direction 224º relative to the positive horizontal direction, or about 44º South of West.

(a) What is the cost of heating a hot tub containing 1440 kg of water from 10.0°C to 40.0°C, assuming 75.0% efficiency to take heat loss to surroundings into account? The cost of electricity is 9.00¢/(kW · h) and the specific heat for water is 4184 J/(kg · °C). $ 67 Incorrect: Your answer is incorrect. How much heat is needed to raise the temperature of m kg of a substance? How many joules are in 1 kWh? (b) What current was used by the 220 V AC electric heater, if this took 3.45 h? 88.2 Correct: Your answer is correct. A

Answers

Answer:

a) [tex]E = 6.024\,USD[/tex], For m kilograms, it is 4184m J., 3600000 joules, b) [tex]i = 88.200\,A[/tex]

Explanation:

a) The amount of heat needed to warm water is given by the following expression:

[tex]Q_{needed} = m_{w}\cdot c_{w}\cdot (T_{f}-T_{i})[/tex]

Where:

[tex]m_{w}[/tex] - Mass of water, measured in kilograms.

[tex]c_{w}[/tex] - Specific heat of water, measured in [tex]\frac{J}{kg\cdot ^{\circ}C}[/tex].

[tex]T_{f}[/tex], [tex]T_{i}[/tex] - Initial and final temperatures, measured in [tex]^{\circ}C[/tex].

Then,

[tex]Q_{needed} = (1440\,kg)\cdot \left(4184\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (40^{\circ}C - 10^{\circ}C)[/tex]

[tex]Q_{needed} = 180748800\,J[/tex]

The energy needed in kilowatt-hours is:

[tex]Q_{needed} = 180748800\,J\times \left(\frac{1}{3600000}\,\frac{kWh}{J} \right)[/tex]

[tex]Q_{needed} = 50.208\,kWh[/tex]

The electric energy required to heat up the water is:

[tex]E = \frac{50.208\,kWh}{0.75}[/tex]

[tex]E = 66.944\,kWh[/tex]

Lastly, the cost of heating a hot tub is: (USD - US dollars)

[tex]E = (66.944\,kWh)\cdot \left(0.09\,\frac{USD}{kWh} \right)[/tex]

[tex]E = 6.024\,USD[/tex]

The heat needed to raise the temperature a degree of a kilogram of water is 4184 J. For m kilograms, it is 4184m J. Besides, a kilowatt-hour is equal to 3600000 joules.

b) The current required for the electric heater is:

[tex]i = \frac{Q_{needed}}{\eta \cdot \Delta V \cdot \Delta t}[/tex]

[tex]i = \frac{180748800\,J}{0.75\cdot (220\,V)\cdot (3.45\,h)\cdot \left(3600\,\frac{s}{h} \right)}[/tex]

[tex]i = 88.200\,A[/tex]

A 1100 kg car pushes a 1800 kg truck that has a dead battery. When the driver steps on the accelerator, the drive wheels of the car push against the ground with a force of 4500 N.A) What is the magnitude of the force of the car on the truck?B) What is the magnitude of the force of the truck on the car?

Answers

Answer:The answer is 3000 N.

Force (F) is the multiplication of mass (m) and acceleration (a).

F = m · a

It is given:

mc = 1000 kg

mt = 2000 kg

total force: F = 4500 N 

total mass: m = mc + mt

Let's calculate acceleration which is common:

a = F/m = F/(mc + mt) = 4500/(1000 + 2000) = 4500/3000 = 1.5 m/s²

Now, when we know acceleration, let's calculate force on the truck:

Ft = mt · a = 2000 · 1.5 = 3000 N

Explanation:


Which of the following is often found in individuals who are active and eating a healthy diet?

Answers

Answer:

Increased blood circulation to the body.

Explanation:

plato/edmentum

Nowdothesameproblemwiththepivotatthe toes. A Ballet dancer puts all her weight on the toes of one foot. If her mass is 60 kg, what is the force that has to be exerted by her leg muscle to hold that pose? Assume the pivot is at the toes.

Answers

Answer:

The force is  [tex]F = 2400 \ N[/tex]

Explanation:

The diagram for this question is shown on the first uploaded image

 From the question we are told that

   The mass of the dancer is  [tex]m_d = 60 \ kg[/tex]

From the diagram the

      The first distance is [tex]l_1 = 20 \ cm[/tex]

      The second distance is  [tex]l_2 = 5 \ cm[/tex]

At equilibrium the moment about the center of the dancers  feet  is mathematically represented as

      [tex]F * l_2 - (mg* l_1)[/tex]

   Where [tex]g= 10 \ m/s^2[/tex]

substituting values

      [tex]F * 5 - (60* 9.8 * 20)[/tex]

=>    [tex]F = \frac{60 * 10 * 30}{5}[/tex]

=>      [tex]F = 2400 \ N[/tex]

   

To open a door, you apply a force of 10 N on the door knob, directed normal to the plane of the door. The door knob is 0.9 meters from the hinge axis, and the door swings open with an angular acceleration of 5 radians per second squared. What is the moment of inertia of the door

Answers

Answer:

The moment of inertia is [tex]I = 1.8 \ kg m^2[/tex]

Explanation:

From the question we are told that

   The force applied is  [tex]F = 10 \ N[/tex]

    The distance of the knob to the hinge is  [tex]d = 0.9 \ m[/tex]

     The angular acceleration is  [tex]a = 5 \ rad/s[/tex]

The moment is mathematically represented as

        [tex]I = \frac{d Fsin(\theta)}{a}[/tex]

Here [tex]\theta = 90^o[/tex] This is because the force direction is perpendicular to the plane of the door

substituting values

          [tex]I = \frac{0.9 * 10 * sin (90)}{5}[/tex]

          [tex]I = 1.8 \ kg m^2[/tex]

Other Questions
Charles Schwab Corporation is one of the more innovative brokerage and financial service companies in the United States. The company recently provided information about its major business segments as follows (in millions):Investor Services Institutional ServicesRevenues $3,016 $1,523Income from operations 847 523Depreciation 133 54A. How does a brokerage company like Schwab define the "Investor Services" and "Institutional Services" segments? Use the Internet to develop your answerThe segment serves the retail customer, you and me. These are the brokerage, Internet, and mutual fund services used by individual investors. The segment includes the same services provided for financial institutions, such as banks, mutual fund managers, insurance companies, and pension plan administratorsB. Provide a specific example of a variable and fixed cost in the "Investor Services" segment.Variable costs in the "Investor Services" segment include: Check all that apply.Depreciation on brokerage office equipment, such as computers and computer networksDepreciation on brokerage officesProperty taxes on brokerage officesCommissions to brokersFees paid to exchanges for executing tradesTransaction fees incurred by Schwab mutual funds to purchase and sell sharesFixed costs in the "Investor Services" segment include: Check all that apply.Depreciation on brokerage office equipment, such as computers and computer networksCommissions to brokersProperty taxes on brokerage officesDepreciation on brokerage officesFees paid to exchanges for executing tradesTransaction fees incurred by Schwab mutual funds to purchase and sell sharesC. Estimate the contribution margin (in millions) for each segment, assuming depreciation represents the majority of fixed costs.Investor Services Institutional ServicesEstimated contribution margin $_____________ $________________D. If Schwab decided to sell its "Institutional Services" accounts to another company, estimate how much operating income would decline (in millions). $___________ Lins family has completed 70% of a trip. They have traveled 35 miles. How far is the trip? Find the value of this expression if X=-7 Only one ______ can be explored in an experiment. the ratio of zinc to copper is 3:19, if theres 741 copper how much zinc is there? Chen Inc.'s cash balance in the accounting records, before receiving the bank statement, at June 30th was $16,170. During June the company recorded $10,000 of deposits but the bank only showed $7,900 on the June statement. Some of the company's deposits were made on the last day of the month. The company's records also showed that the company wrote checks totalling $3,600 that had not yet cleared the bank. The June 30th bank statement showed a balance of $16,750. The company was surprised to see that the bank statement showed the following items that the company was not aware of until the bank statement arrived: NSF check for $935, bank fee of $10, and interest income totalling $25. What is the total amount of cash that should be reported on Chen Inc.'s balance sheet at June 30th?a. $15,250 b. $17,120 c. $14,670 d. $17,850 How did abolitionists use Enlightenment ideas to criticize the institution ofslavery in Europe and the United States?O A. They argued that economies based on free labor were strongerthan those with slaves.OB. They claimed that individual states should be given the chance tovote on abolition.C. They noted that enslaving people denied them their right to libertyand equality.D. They appealed to Christians who believed that God viewed allpeople as equal. A baseball team won 9 games, which was 60% of the total number of games the team played. How many total games did the team play? modeling the carbon cycle assignment Include short phrases on your poster that summarize what occurs at each stage of the carbon cycle. help Name arid in a sentence (simple) I need help I keep getting it wrong Who will believe my verse in time to come,If it were filld with your most high deserts?Though yet, heaven knows, it is but as a tombWhich hides your life and shows not half your partsIf I could write the beauty of your eyesAnd in fresh numbers number all your graces,The age to come would say This poet lies,Such heavenly touches ne'er touchd earthly faces.So should my papers yellowd with their ageBe scorn'd like old men of less truth than tongue,And your true rights be termd a poet's rageAnd stretched metre of an antique song:But were some child of yours alive that time,You should live twice: in it and in my rhymeWhat type of poem is this?A. SonnetB. OdeC. SectinaD. Haiku Please check this for me i just learned scientific notation Two black-fur mice are bred, and have the litter shown below. What is the most likely explanation for the presence of the white-fur offspring? Give the domain and range. As humans, we tend to focus on ______ comments more strongly than ______ comments. positive important constructive constructive important helpful negative unhelpful unhelpful positive helpful negaitve What might happen to the organisms in the food web below if the number of phytoplankton and vegetation drastically decreased? 1. A force that pushes forward on an object speeds the object up. A force that pushes backwards slowsthe object down. What effect does a force that is perpendicular to the object's motion do? Point S(6,-2) is translated 3 units left.What would be the coordinates of the resulting point,S? Can Anybody Answer This