A skater wearing in – line skates (no friction) is standing in the middle of the aisle inside a bus and is not holding on to anything. Which way would the skater move in reaction to the bus as it pulls away from the bus stopA skater wearing in – line skates (no friction) is standing in the middle of the aisle inside a bus and is not holding on to anything. Which way would the skater move in reaction to the bus as it pulls away from the bus stop

Answers

Answer 1

Before the bus starts moving, the bus and the skater are both standing still.

When the bus starts moving and pulls away from the bus-stop, the skater stays right where she is.  

The people outside on the sidewalk see her standing still, and they see the bus moving out from under her.  

The other passengers on the bus see her rolling backwards down the aisle, toward the back of the bus.


Related Questions

still really need help with these three questions!!

Answers

Explanation:

2.  No, not always.  Normal force is equal to force of gravity only when there's no acceleration in the vertical direction.

For example, when you stand in an elevator that's not moving, or moving at constant speed, then the normal force equals your weight.  But when the elevator accelerates upward, the normal force increases (making you feel heavier).  And when the elevator slows down, the normal force decreases (making you feel lighter).

3.  Yes, it is possible for an object to be moving eastward and experience a net force westward.  An example is a car applying the brakes.

4.  Friction force allows you to walk.  When you push against the floor, the floor's friction pushes back, as Newton's third law says.

If you try to walk on a slippery surface like ice, you won't be able to push against the ice, and the ice won't push back.

A whistle of frequency 516 Hz moves in a circle of radius 64.3 cm at an angular speed of 17.9 rad/s. What are (a) the lowest and (b) the highest frequencies heard by a listener a long distance away, at rest with respect to the center of the circle

Answers

Answer:

(a) 498.6 Hz

(b) 534.6 Hz

Explanation: Please see the attachments below

A person is swimming in a river with a current that has speed vR with respect to the shore. The swimmer first swims downstream (i.e. in the direction of the current) at a constant speed, vS, with respect to the water. The swimmer travels a distance D in a time tOut. The swimmer then changes direction to swim upstream (i.e. against the direction of the current) at a constant speed, vS, with respect to the water and returns to her original starting point (located a distance D from her turn-around point) in a time tIn. What is tOut in terms of vR, vS, and D, as needed?

Answers

Answer:

The time taken is  [tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]

Explanation:

From the question we are told that

     The speed of the current is  [tex]v__{R}}[/tex]

     The speed of the swimmer in direction of current is [tex]v__{S}}[/tex]

      The distance traveled by the swimmer is  [tex]D[/tex]

       The time taken to travel this distance is  [tex]t_{out}[/tex]

      The speed of the swimmer against  direction of current is  [tex]v__{s}}[/tex]

The resultant speed for downstream current is

       [tex]V_{r} = v__{S}} +v__{R}}[/tex]

The time taken can be mathematically represented as

      [tex]t_{out} = \frac{D}{V_{r}}[/tex]

      [tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]

       

   

A uniform ladder stands on a rough floor and rests against a frictionless wall. Since the floor is rough, it exerts both a normal force N1 and a frictional force f1 on the ladder. However, since the wall is frictionless, it exerts only a normal force N2 on the ladder. The ladder has a length of L = 4.6m, a weight of WL= 69.0N , and rests against the wall a distance d = 3.75 m above the floor. If a person with a mass of m = 90 kg is standing on the ladder, determine the forces exerted on the ladder when the person is halfway up the ladder.

Required:
Solve of N1, N2 and f1

Answers

Answer:

The  normal force N1 exerted by the floor is  [tex]N_1 = 951 \ N[/tex]

The  normal force N2 exerted by the wall is  [tex]N_2= 616.43 \ N[/tex]

The frictional force exerted by the wall is  [tex]f = N_2 = 616.43 \ N[/tex]  

Explanation:

From the question we are told that

    The length of the ladder is  [tex]L = 4.6 \ m[/tex]

    The weight of the ladder  is

    The distance of the ladder position on the wall from the floor is  [tex]D = 3.75 \ m[/tex]

     The mass of the person is  [tex]m = 90 kg[/tex]

Applying Pythagoras theorem

The length of the position the ladder on the ground from the base of the wall is

    [tex]A = \sqrt{L^ 2 - D^2}[/tex]

substituting values

    [tex]A = \sqrt{(4.6^2)-(3.75^2)}[/tex]

    [tex]A = 2.66 \ m[/tex]

  In order the for the ladder not to shift from the ground the sum of the moment about the position of the ladder on the ground must be equal to zero this is mathematically represented as

        [tex]\sum M = 0 = N_2 * D - [\frac{1}{2} * W_L ] * [(mg) *A ][/tex]

         [tex]\sum M = 0 = N_2 * 3.75 - [\frac{1}{2} * 69.0 ] * [(90*9.8) * \frac{4.6}{2.66} ][/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2= 616.43 \ N[/tex]

Now the force exerted by the floor on the ladder is mathematically represented as

           [tex]N_1 = W_L + (m * g )[/tex]

substituting values

          [tex]N_1 = 951 \ N[/tex]

Now the horizontal forces acting on the ladder are [tex]N_2 \ and \ f[/tex] and they are in opposite direction so

     [tex]f = N_2 = 616.43 \ N[/tex]  

         

An object with a mass of 1500 g (grams) accelerates 10.0 m/s2 when an
unknown force is applied to it. What is the amount of the force





Answers

Answer:

15N

Explanation:

F=ma

m=1500g = 1.5kg

a=10m/s2

1.5×10=15 N

Answer:15000gms^-2

Explanation:

F=m×a

m=1500g, a=10ms^-2

F=(1500×10)gms^-2

F=15000gms^-2

At an instant when a soccer ball is in contact with the foot of the player kicking it, the horizontal or x component of the ball's acceleration is 950 m/s2 and the vertical or y component of its acceleration is 750 m/s2. The ball's mass is 0.35 kg. What is the magnitude of the net force acting on the soccer ball at this instant?

Answers

Answer:

F = 423.63 N

Explanation:

Since, the x-component and y-components of the acceleration of ball are given. Therefore, we need to find the resultant or net acceleration of the soccer ball first. For that purpose we use to the formula for the resultant of rectangular components of a vector:

a = √(ax² + ay²)

where,

a = net acceleration = ?

ax = x - component of acceleration = 950 m/s²

ay = y - component of acceleration = 750 m/s²

Therefore,

a = √[(950 m/s²)² + (750 m/s²)²]

a = 1210.4 m/s²

Now, from Newton's Second Law, we know that:

F = ma

where,

m = mass of ball = 0.35 kg

F = Net force acting on ball = ?

F = (0.35 kg)(1210.4 m/s²)

F = 423.63 N

A particle leaves the origin with a speed of 3.6 106 m/s at 34 degrees to the positive x axis. It moves in a uniform electric field directed along positive y axis. Find Ey such that the particle will cross the x axis at x

Answers

Answer:

E = -4556.18 N/m

Explanation:

Given data

u = 3.6×10^6 m/sec

angle = 34°

distance x = 1.5 cm = 1.5×10^-2 m  (This data has been assumed not given in

Question)

from the projectile motion the horizontal distance traveled by electron is

x = u×cosA×t

⇒t = x/(u×cos A)

We also know that force in an electric field is given as

F = qE

q= charge , E= strength of electric field

By newton 2nd law of motion

ma = qE

⇒a = qE/m

Also, y = u×sinA×t - 0.5×a×t^2

⇒y = u×sinA×t - 0.5×(qE/m)×t^2

if y = 0 then

⇒t = 2mu×sinA/(qE) = x/(u×cosA)

Also, E = 2mu^2×sinA×cosA/(x×q)

Now plugging the values we get

E = 2×9.1×10^{-31}×3.6^2×10^{12}×(sin34°)×(cos34°)/(1.5×10^{-2}×(-1.6)×10^{-19})

E = -4556.18 N/m

The value of Ey such that the particle will cross the x axis at x=1.5 cm is -4556.18 N/m.

What is electric field?

The field developed when a charge is moved. In this field, a charge experiences an electrostatic force of attraction or repulsion depending on the nature of charge.

Given is a particle leaves the origin with a speed of 3.6 x 10⁶ m/s at 34 degrees to the positive x axis. It moves in a uniform electric field directed along positive y axis.

The distance x = 1.5 cm = 1.5×10⁻² m (assumed, not given in question)

The horizontal distance traveled by particle is

x = ucosθt

t = x/ucosθ

The force in an electric field is F = qE...................(1)

where, q is charge , E is the strength of electric field

From, newton 2nd law of motion, Force F = ma.................(2)

Equating both the equations, we get

ma = qE

a = qE/m..................(3)

The vertical distance, y =usinθt - 1/2at²

From equation 3, we have

y = usinθt  -  1/2 (qE/m) t²

if y = 0, t = 2musinθ/(qE) = x / (ucosθ)

The electric field is represented as

Also, E = 2mu²×sinθ×cosθ/(xq)

Plug the values, we get

E = 2×(9.1×10⁻³¹)×(3.6 x 10⁶)²×sin34°×cos34°/( 1.5×10⁻² ×(-1.6)×10⁻¹⁹)

E = -4556.18 N/m

Thus, the electric field of the particle is  -4556.18 N/m.

Learn more about electric field.

https://brainly.com/question/15800304

#SPJ5

A merry-go-round on a playground consists of a horizontal solid disk with a weight of 810 N and a radius of 1.56 m. A child applies a force 49.0 N tangentially to the edge of the disk to start it from rest. What is the kinetic energy of the merry-go-round disk (in J) after 2.95 s

Answers

Answer:

Kinetic Energy of the disk = 252 J

Explanation:

weight of disk = 810 N

radius = 1.56 m

applied force = 49 N

time = 2.95 s

kinetic energy of disk = ?

first, we find the mass of the disk

mass of disk = weight/acceleration due to gravity(9.81 m/s^2) = 810/9.81 m/s^2

mass of disk = 82.57 kg

torque on the disk = force x radius = 49 x 1.56 = 76.44 N-m

moment of inertia I = m[tex]r^{2}[/tex] = 82.57 x [tex]1.56^{2}[/tex] = 200.9 kg-[tex]m^{2}[/tex]

recall that

Torque T = Iα

where α = angular acceleration

76.44 = 200.9α

α = 76.44/200.9 = 0.38 m/s^2

from the equation of angular motion,

ω = ω' + αt

where ω =  final angular speed

ω' = initial angular speed = 0 rad/s since disk starts from rest

t = time = 2.95 s

imputing values into the equation, we have

ω = 0 + (0.38 x 2.95)

ω = 1.12 rad/s

kinetic energy of the disk = I[tex]w^{2}[/tex]

KE = 200.9 x [tex]1.12^{2}[/tex]

Kinetic Energy of the disk = 252 J

A 1000-kg car is driving toward the north along a straight horizontal road at a speed of 20.0 m/s. The driver applies the brakes and the car comes to a rest uniformly in a distance of 240 m. What are the magnitude and direction of the net force applied to the car to bring it to rest?

Answers

Answer:

The value of F= - 830 N

Since the force is negative, it implies direction of the force applied was due south.

Explanation:

Given data:

Mass = 1000-kg

Distance, d = 240 m

Initial velocity, v1 = 20.0 m/s

Final velocity, v2 = 0 (since the car came to rest after brake was applied)

v2²= v1² + 2ad (using one of the equation of motion)

0=  20² + (2 x a x  240)

0= 400 + 480 a

a = - 400/480

a = - 0.83 m/s²

Then, imputing the value of a into

F = ma

F = 1000 kg x ( - 0.83 m/s²)

F= - 830 N

The car was driving toward the north, and since the force is negative, it implies direction of the force applied was due south.

The brakes of a car are applied to give it an acceleration of -2m/s^2. The car comes to a stop in 3s. What was its speed when the brakes were applied?

Answers

Answer:

So if its acceleration is -2m/s^2 that means every second the initial velocity would be subtracted by 2. So since it took 3 seconds 2*3=6. The initial velocity was 6 m/s

A dimension is a physical nature of a quantity.
(i) give two (2) limitations of dimensional analysis..
(ii) if velocity (v), time (T) and force (F) were chosen as basic quantities, find the dimensions of mass?​

Answers

Answer:

i) A dimension is the physical nature of a quantity. The two limitations of dimensional analysis is as following:

Dimesnional analysis is unable to derive relation when a physical quantity depends on more than three factors with dimensions. It is unable to derive a formula that contain exponential function, trigonometric function, and logarithmic function.

ii) Given:

Velocity = v

Time = t

Force = F

Force = mass x acceleration

         = mass x velocity/time

So, mass= (force x time) / velocity

[mass] = Ftv^-1

Hence, dimesnion of mass is Ftv^-1.

During last year’s diving competition, the divers always pull their limbs in and curl up their bodies when they do flips. Just before entering the water, they fully extend their limbs to enter straight down as shown. Explain the effect of both actions on their angular velocities and kinetic energy (support your answer with working). Also explain the effect on their angular momentum.

Answers

Answer:

the angular speed of the person increases, being able to make more turns and faster.

 K₂ = K₁ I₁ / I₂

Explanation:

When the divers are turning the system is isolated, so all the forces are internal and therefore also the torque, therefore the angular momentum is conserved

initial, joint when starting to turn

         L₀ = I₁ w₁

final. When you shrink your arms and legs

         Lf = I₂ w₂

         L₀ = Lf

         I₁ w₁ = I₂ w₂

when you shrink your arms and legs the distance to the turning point decreases and since the moment of inertia depends on the distance squared, the moment of inertia also decreases

      I₂ <I₁

         w₂ = I₁ / I₂ w₁

therefore the angular speed of the person increases, being able to make more turns and faster.

When it goes into the water it straightens the arm and leg, so the moment of inertia increases

          I₁> I₂

           w₁ = I₂ / I₁ w₂

therefore we see that the angular velocity decreases, therefore the person trains the water like a stone and can go deeper faster.

In both cases the kinetic energy is

          K = ½ I w²

the initial kinetic energy is

          K₁ = ½ I₁ w₁²

the final kinetic energy is

          K₂ = ½ I₂ w₂²

we substitute

          K₂ = ½ I₂ (I₁ / I₂ w1² 2

          K₂ = ½ I₁² / I₂ w₁² = (½ I₁ w₁²)  I₁ / I₂  

          K₂ = K₁ I₁ / I₂

therefore we see that the kinetic energy increases by factor I₁/I₂

A roller coaster car may be approximated by a block of mass m. Thecar, which starts from rest, is released at a height h above the ground and slides along a frictionless track. The car encounters a loop of radius R. Assume that the initial height h is great enough so that the car never losses contact with the track.

Required:
a. Find an expression for the kinetic energy of the car at the top of the loop. Express the kinetic energy in terms of m, g, h, and R.
b. Find the minimum initial height h at which the car can be released that still allows the car to stay in contact with the track at the top of the loop.

Answers

Answer:

Explanation:

At height h , potential energy of coaster car  having mass m = mgh .

The car will lose potential energy and gain kinetic energy.

height lost by car when it is at the top of loop of radius R

= h - 2R

potential energy lost = mg ( h - 2R )

kinetic energy gained = mg ( h - 2R )

kinetic energy = 0 + mg ( h - 2R )

= mg ( h - 2R )

b )

For the car to remain in contact with the track , if v be the minimum velocity

centripetal force at top = mg

m v² / R = mg

v² = gR

kinetic energy = 1/2 mv²

= 1/2 m x gR

= mgR /

If h be the minimum height that can give this kinetic energy

mg ( h - 2R ) = mgR / 2

h - 2R = R / 2

h = 2.5 R .

How much work must be done on a 10 kg snowboard to increase its speed from 4 m/s to 6 m/s?

Answers

Answer:

100 J

Explanation:

Work = change in energy

W = ΔKE

W = ½ mv² − ½ mv₀²

W = ½ m (v² − v₀²)

W = ½ (10 kg) ((6 m/s)² − (4 m/s)²)

W = 100 J

ii.
The drift velocity
(b) A 1800w toaster, a 1.3KW electric frying pan, and a 100w lamp are plugged to the same
20A, 120V circuit.
i.
What current is drawn by each device and what is the resistance of each device?
State whether this combination will blow the fuse or not.​

Answers

Answer:

toaster -- 15 A, 8 Ωfry pan -- 10.83 A, 11.08 Ωlamp -- 0.83 A, 144 Ωfuse will blow

Explanation:

  P = VI

  I = P/V = P/120

  R = V/I = V/(P/V) = V^2/P = 14400/P

Toaster: I = 1800/120 = 15 . . . amps

  R = 14400/1800 = 8 . . . ohms

Fry pan: I = 1300/120 = 10.833 . . . amps

  R = 14400/1300 = 11.08 . . . ohms

Lamp: I = 100/120 = 0.833 . . . amps

  R = 14400/100 = 144 . . . ohms

The total current exceeds 20 A, so will blow the fuse.

A driver wearing a seat beat decelerates at roughly the same rate as the car it self. Since many modern cars have a "crumble zone" built into the front of the car, let us assume that the car decelerates of a distance of 0.9 m. What is the net force acting on a 65 kg driver who is driving at 18 m/sec and comes to rest in this distance

Answers

Answer:

11,700Newton

Explanation:

According to Newton's second law, Force = mass × acceleration

Given mass = 65kg.

Acceleration if the car can be gotten using one of the equation of motion as shown.

v² = u²+2as

v is the final velocity = 18m/s

u is the initial velocity = 0m/s

a is the acceleration

s is the distance travelled = 0.9m

On substitution;

18² = 0²+2a(0.9)

18² = 1.8a

a = 324/1.8

a = 180m/²

Net force acting on the body = 65×180

Net force acting on the body = 11,700Newton

Sara walks part way around a swimming pool. She walks 50 yards north, then
20 yards east, then 50 yards south. The magnitude of her total displacement
during this walk is
yards.

Answers

Answer:

20 Yards

Explanation:

|---20----|

|            |

| 50       |50

|---D--->|

Start      End

Total displacement(D)  20 yards (East).

What is The mass of an electron

Answers

9.10938356 × 10-31 kilograms

can a body be in equilibrium if only one external force act on its ? explain

Answers

Answer:

Explanation:

If there is only 1 force, the body can never be in equilibrium, providing that the force is not zero (and that would hardly be a force. Zero is possible in math and it means something. It is debatable in physics).

You cannot think of a condition where something is stationary on planet earth and there are not 2 forces or more forces involved.

Think of something like a block of wood sitting on a table. It is not moving, we'll say. Gravity is holding it down, but what is pushing up on it?

The table is. There are 2 forces and they are equal in magnitude, but opposite in direction. That matters.

Using the equation for the distance between fringes, Δy = xλ d , complete the following. (a) Calculate the distance (in cm) between fringes for 694 nm light falling on double slits separated by 0.0850 mm, located 4.00 m from a screen. cm (b) What would be the distance between fringes (in cm) if the entire apparatus were submersed in water, whose index of refraction is 1.333? cm

Answers

Answer:

Explanation:

Distance between fringe or fringe width =  xλ /  d

where x is location of screen and d is slit separation

Given x = 4 m

λ = 694 nm

d = .085 x 10⁻³ m

distance between fringes

= 4 x 694 x 10⁻⁹ / .085 x 10⁻³

= 4 x 694 x 10⁻⁹ / 85 x 10⁻⁶

= 32.66 x 10⁻³ m

= 32.66 mm .

3.267 cm

b )

when submerged in water , wavelength in water becomes as follows

wavelength in water = wave length / refractive index

= 694 / 1.333 nm

= 520.63 nm

new distance between fringes

3.267 / 1.333

= 2.45 cm .

A train locomotive is pulling two cars of the same mass behind it. Determine the ratio of the tension in the coupling (think of it as a cord) between the locomotive and the first car (FT1) to that between the first car and the second car (FT2), for any nonzero acceleration of the train

Answers

Answer:

The ratio is  [tex]\frac{F_{T1}}{F_{T2}} = 2[/tex]

Explanation:

The diagram for this question is shown on the first uploaded image

Here we are assume the acceleration of the train is a

which makes the acceleration of each car a

From the question we are told that

      Considering the second car

 The force causing it s movement  is mathematically represented as

       [tex]F_{T2} = ma[/tex]

 Considering the first car

 The force causing it s movement  is mathematically represented as

      [tex]F = F_{T1} -F_{T2} = ma[/tex]

=>   [tex]F_{T1} -ma = ma[/tex]

=>   [tex]F_{T1} = 2 ma[/tex]

=> [tex]\frac{F_{T1}}{ma} = 2[/tex]

=> [tex]\frac{F_{T1}}{F_{T2}} = 2[/tex]

I really need help with this question someone plz help !

Answers

Answer:D

Explanation:

Given

Same force is applied to each ball such that all have different masses

and Force is given by the product of mass and acceleration

[tex]F=m\times a[/tex]

[tex]a=\frac{F}{m}[/tex]

So acceleration of ball A

[tex]a_A=\frac{F}{0.5}=2F[/tex]

acceleration of ball B

[tex]a_B=\frac{F}{0.75}=\frac{4F}{3}=1.33F[/tex]

acceleration of ball C

[tex]a_C=\frac{F}{1}=F[/tex]

acceleration of ball D

[tex]a_D=\frac{F}{7.3}=\frac{F}{7.3}[/tex]

It is clear that acceleration of ball D is least.

An industrial flywheel (a solid disk) of mass 10.0 kg and radius 17.3 cm is rotating at an angular speed of 22.0 rad/s. Upon being switched to a slower setting, the flywheel uniformly slows down to 13.5 rad/s after rotating through an angle of 13.8 radians. Calculate the angular acceleration of the flywheel in the process of slowing down

Answers

Answer:

Explanation:

During slowing down , initial angular velocity ω₁ = 22 rad /s

final angular velocity ω₂ = 13.5 rad /s

using the law's of motion formula for rotation

ω₂² =  ω₁² + 2 αθ  , α is angular acceleration and θ is angle in radian rotated during this period

13.5² = 22² - 2xα x 13.8

2xα x 13.8 = 484 - 182.25

α  =  10.93 rad / s²

Two spectators at a soccer game see, and a moment later hear, the ball being kicked on the playing field. The time delay for the spectator A is 0.55 s, and for the spectator B it is 0.45 s. Sight lines from the two spectators to the player kicking the ball meet at an angle of 90°. The speed of sound in the air is 343 m/s.
How far are (a) spectator A and (b) spectator B from the player?
(c) How far are the spectators from each other?

Answers

Answer:

a)188.65m

b)154.35m

c)243.7m

Explanation:

Given data:

[tex]t_A=0.55s[/tex]

[tex]t_B=0.45s[/tex]

(a) The distance from the kicker to each of the 2 spectators is given by:

[tex]d_A=v \times t_A[/tex]

where,

v= speed of sound

[tex]t_A[/tex]=time taken for the sound waves to reach the ears

[tex]d_A=343\times 0.55=188.65[/tex]m

(b)[tex]d_B=v \times t_B[/tex]

where,

v= speed of sound

[tex]t_B[/tex]=time taken for the sound waves to reach the ears

[tex]d_B=343\times 0.45=154.35m[/tex]

(c)As the angle b/w slight lines  from the two spectators to the player is right angle,

hypotenuse=the distance b/w 2 spectators

and, the slight lines are the other 2 lines

[tex]D^2=d_A^2+d_B^2\\D=\sqrt{188.65^2+154.35^2} \\D= 243.7m[/tex]

A) In the figure below, a cylinder is compressed by means of a wedge against an elastic constant spring = 12 /. If = 500 , determine what the minimum compression in the spring will be so that the pad does not move. Disregard the weight of the blocks and . The coefficient of friction between and the pad and between the floor and the pad is s = 0.4. Consider that the friction between the cylinder and the vertical walls is negligible


Answer: 4.08 cm.


B) Determine the lowest force required to lift the weight of 750 . The static coefficient of friction between and and between and is s= 0.25, and between and is 's = 0.5. Disregard the weight of the shims and .


Answer : 1095.4 N.




Answers

Explanation:

A) Draw free body diagrams of both blocks.

Force P is pushing right on block A, which will cause it to move right along the incline.  Therefore, friction forces will oppose the motion and point to the left.

There are 5 forces acting on block A:

Applied force P pushing to the right,

Normal force N pushing up and left 10° from the vertical,

Friction force Nμ pushing down and left 10° from the horizontal,

Reaction force Fab pushing down,

and friction force Fab μ pushing left.

There are 2 forces acting on block B:

Reaction force Fab pushing up,

And elastic force kx pushing down.

(There are also horizontal forces on B, but I am ignoring them.)

Sum of forces on A in the x direction:

∑F = ma

P − N sin 10° − Nμ cos 10° − Fab μ = 0

Solve for N:

P − Fab μ = N sin 10° + Nμ cos 10°

P − Fab μ = N (sin 10° + μ cos 10°)

N = (P − Fab μ) / (sin 10° + μ cos 10°)

Sum of forces on A in the y direction:

N cos 10° − Nμ sin 10° − Fab = 0

Solve for N:

N cos 10° − Nμ sin 10° = Fab

N (cos 10° − μ sin 10°) = Fab

N = Fab / (cos 10° − μ sin 10°)

Set the expressions equal:

(P − Fab μ) / (sin 10° + μ cos 10°) = Fab / (cos 10° − μ sin 10°)

Cross multiply:

(P − Fab μ) (cos 10° − μ sin 10°) = Fab (sin 10° + μ cos 10°)

Distribute and solve for Fab:

P (cos 10° − μ sin 10°) − Fab (μ cos 10° − μ² sin 10°) = Fab (sin 10° + μ cos 10°)

P (cos 10° − μ sin 10°) = Fab (sin 10° + 2μ cos 10° − μ² sin 10°)

Fab = P (cos 10° − μ sin 10°) / (sin 10° + 2μ cos 10° − μ² sin 10°)

Sum of forces on B in the y direction:

∑F = ma

Fab − kx = 0

kx = Fab

x = Fab / k

x = P (cos 10° − μ sin 10°) / (k (sin 10° + 2μ cos 10° − μ² sin 10°))

Plug in values and solve.

x = 500 N (cos 10° − 0.4 sin 10°) / (12000 (sin 10° + 0.8 cos 10° − 0.16 sin 10°))

x = 0.0408 m

x = 4.08 cm

B) Draw free body diagrams of both blocks.

Force P is pushing block A to the right relative to the ground C, so friction force points to the left.

Block A moves right relative to block B, so friction force on A will point left.  Block B moves left relative to block A, so friction force on B will point right (opposite and equal).

Block B moves up relative to the wall D, so friction force on B will point down.

There are 5 forces acting on block A:

Applied force P pushing to the right,

Normal force Fc pushing up,

Friction force Fc μ₁ pushing left,

Reaction force Fab pushing down and left 15° from the vertical,

and friction force Fab μ₂ pushing up and left 15° from the horizontal.

There are 5 forces acting on block B:

Weight force 750 n pushing down,

Normal force Fd pushing left,

Friction force Fd μ₁ pushing down,

Reaction force Fab pushing up and right 15° from the vertical,

and friction force Fab μ₂ pushing down and right 15° from the horizontal.

Sum of forces on B in the x direction:

∑F = ma

Fab μ₂ cos 15° + Fab sin 10° − Fd = 0

Fd = Fab μ₂ cos 15° + Fab sin 15°

Sum of forces on B in the y direction:

∑F = ma

-Fab μ₂ sin 15° + Fab cos 10° − 750 − Fd μ₁ = 0

Fd μ₁ = -Fab μ₂ sin 15° + Fab cos 15° − 750

Substitute:

(Fab μ₂ cos 15° + Fab sin 15°) μ₁ = -Fab μ₂ sin 15° + Fab cos 15° − 750

Fab μ₁ μ₂ cos 15° + Fab μ₁ sin 15° = -Fab μ₂ sin 15° + Fab cos 15° − 750

Fab (μ₁ μ₂ cos 15° + μ₁ sin 15° + μ₂ sin 15° − cos 15°) = -750

Fab = -750 / (μ₁ μ₂ cos 15° + μ₁ sin 15° + μ₂ sin 15° − cos 15°)

Sum of forces on A in the y direction:

∑F = ma

Fc + Fab μ₂ sin 15° − Fab cos 15° = 0

Fc = Fab cos 15° − Fab μ₂ sin 15°

Sum of forces on A in the x direction:

∑F = ma

P − Fab sin 15° − Fab μ₂ cos 15° − Fc μ₁ = 0

P = Fab sin 15° + Fab μ₂ cos 15° + Fc μ₁

Substitute:

P = Fab sin 15° + Fab μ₂ cos 15° + (Fab cos 15° − Fab μ₂ sin 15°) μ₁

P = Fab sin 15° + Fab μ₂ cos 15° + Fab μ₁ cos 15° − Fab μ₁ μ₂ sin 15°

P = Fab (sin 15° + (μ₁ + μ₂) cos 15° − μ₁ μ₂ sin 15°)

First, find Fab using the given values.

Fab = -750 / (0.25 × 0.5 cos 15° + 0.25 sin 15° + 0.5 sin 15° − cos 15°)

Fab = 1151.9 N

Now, find P.

P = 1151.9 N (sin 15° + (0.25 + 0.5) cos 15° − 0.25 × 0.5 sin 15°)

P = 1095.4 N

Convert from scientific notation to standard form
9.512 x 10-8

Answers

Answer:

0.00000009512

Explanation:

Scientific notation is a very useful and abbreviated way of writing quantities that are very large or small. It consists of placing the number with an integer and multiplying by an exponent to arrive at the same number.

let's pass the number 9,512 10⁻⁸ to decimal notation

       9,512 / 10⁸ = 9,512 / 100000000

        0.00000009512

As we see writing this number, it is very easy to make mistakes

Superman is jogging alongside the railroad tracks on the outskirts of Metropolis at 100 km/h. He overtakes the caboose of a 500-m-long freight train traveling at 50 km/h. At that moment he begins to accelerate at 10 m/s2. How far will the train have traveled before Superman passes the locomotive?

Answers

Answer:

d = 41.91 m

Explanation:

In order to calculate the distance traveled by the train while superman passes it, you write the equations of motion for both superman and train:

For train, you have a motion with constant speed. You write the equation of motion of the position of the front of the train:

[tex]x=x_o+v_1t[/tex]    (1)

xo: initial position of the front of the train = 500m

v1: speed of the train = 50km/h

For superman, you take into account that the motion is an accelerated motion (you assume superman is at the origin of coordinates):

[tex]x'=v_2t+\frac{1}{2}at^2[/tex]   (1)

v2: initial speed of superman = 100km/h

a: acceleration = 10m/s^2

When superman passes the train, both positions x and x' will be equal. Hence, you equal the equations (1) and (2) and you calculate the time t. But before you convert the units of the velocities v1 and v2 to m/s:

[tex]v_1=50\frac{km}{h}*\frac{1000m}{1km}*\frac{1h}{3600s}=13.88\frac{m}{s}\\\\v_2=100\frac{km}{h}=\frac{1000m}{1km}*\frac{1h}{3600s}=27.77\frac{m}{s}[/tex]

Thus, you equal x=x'

[tex]x=x'\\\\x_o+v_1t=v_2t+\frac{1}{2}at^2\\\\500m+(13.88m/s)t=(27.77m/s)t+\frac{1}{2}(10m/s^2)t^2\\\\(50\frac{m}{s^2})t^2+(13.89\frac{m}{s})t-500m=0[/tex]

You solve the last equation for t by using the quadratic formula:

[tex]t_{1,2}=\frac{-13.89\pm \sqrt{(13.89)^2-4(50)(-500)}}{2(50)}\\\\t_{1,2}=\frac{-13.89\pm 316.53}{100}\\\\t_1=3.02s\\\\t_2=-3.30s[/tex]

You only use t1 = 3.02s because negative times do not have physical meaning.

Next, you replace this value of t in the equation (1) to calculate the position of the train (for when superman just passed it):

[tex]x=500m+(13.88m/s)(3.02s)=541.91m[/tex]

x is the position of the front of the train, then, the dstance traveled by the train is:

d = 541.91m - 500m = 41.91 m

In each pair, select a substance that is a better heat conductor.

1. copper wire / wood 3. water / iron
2. water / air 4. iron / glass

Answers

Answer:

1)copper wire

Explanation:

it is the best electric conductor

Cooper wire / wood
Cooper is a good conductor of heat and electricity. Cooper is used in making wires

A mechanic applies a force of 60N at a distance of 80 cm from the pivot on a wheel wrench. What is the size of the moment?

Answers

Answer:

48 Nm

Explanation:

Moment, or torque, is the cross product of radius and force vectors.

τ = r × F

τ = (0.80 m) (60 N)

τ = 48 Nm

19. After a snowstorm, you put on your frictionless skis and tie a rope to the back of your friend’s truck. Your total mass is 70 kg and the truck exerts a constant force of 20 N. How fast will you be going after 15 seconds, in m/s and MPH?

Answers

Explanation:

It is given that,

Total mass is 70 kg

The truck exerts a constant force of 20 N.

Then the net force is given by :

F = ma

a is acceleration of rider

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{20}{70}\\\\a=\dfrac{2}{7}\ m/s^2[/tex]

Initial velocity of rider is 0. So, using equation of kinematics to find the final velocity as :

[tex]v=u+at\\\\v=at\\\\v=\dfrac{2}{7}\times 15\\\\v=4.28\ m/s[/tex]

Since, 1 m/s = 2.23 mph

4.28 m/s = 9.57 mph

So, the speed of the rider is 4.28 m/s or 9.57 mph.  

Other Questions
If an instalment plan quotes a monthly interest rate of 4%, the effective annual/yearly interest rate would be _____________. 4% Between 4% and 48% 48% More than 48% Find the GCF of 22ab2 c2 and 40a 3 c2.4a3b2c22ab2c24ac22ac2 Need help with this question A bicycle manufacturing company makes a particular type of bike. Each child bike requires 4 hours to build and 4 hours to test. Each adult bike requires 6 hours to build and 4 hours to test. With the number of workers, the company is able to have up to 120 hours of building time and 100 hours of testing time for a week. If c represents child bikes and a represents adult bikes, determine which system of inequality best explains whether the company can build 20 child bikes and 6 adult bikes in the week. (2 points) A: No, because the bike order does not meet the restrictions of 4c + 6a 120 and 4c + 4a 100 B: No, because the bike order does not meet the restrictions of 4c + 4a 120 and 6c + 4a 100 C: Yes, because the bike order meets the restrictions of 4c + 6a 120 and 4c + 4a 100 D: Yes, because the bike order meets the restrictions of 4c + 4a 120 and 6c + 4a 100 2 PointsWhich argument about school uniforms would most likely appeal to anaudience of school principals?O A. School uniforms will make students feel embarrassed to come toschool.B. School uniforms will be costlybequiring the government to raisemoney.C. School uniforms will lead to savings when it comes to clothesshopping.D. School uniforms will help students represent their school in apositive way. What was the effect on indigenous people upon the arrival of the Europeans????? how much volume do the gas molecules take up in an inflated balloon two consecutive negative integers have a product of 110 . what are the integers? PLEASE HELP ME ASAP! CHEMISTRY TUTORSEE ATTACHED Use the figure below to complete the following problem Given : R,S,T are midpoints of AC, AB, and CB. Which of the following is false?A a child's age and the height of a child is a positive correlationB none, since all of the other answer choices are trueC the number of hours a person studies and the numerical score on theexam is a positive correlation09D the speed of a vehicle and the time it takes the vehicle to travel 60miles is a positive correlation0909 1. Water is filling a bathtub at a rate of 7 gallons per minute. Complete the table of equivalentratios for the first 5 minutes of the bathtub filling up. 11) Type the missing number in this sequence:49,43,37.31,19,13 Determine how many lines of sysmmetry each object had. Then determine whether each object has 180 degree rotational symmetry Find the unknown side of the triangle below (round to the nearest tenth).A. 18 cmB. 22.9 cmC. 26.9 cmD. 21.2 cmPlease answer this Find the volume of the pyramid. In at least 100 words describe the characters relationship to the carp throughout wangs A car travels 60 km in the first 2 hours and 68 km in the next 2 hours. Wha8 km/h128 km/hO 64 km/h32 km/h GUYS PLEASE HELP!!!!! WILL GIVE BRAINLIEST FOR BEST ANSWER!!!!(a) Consider the following statement: The dress is yellow. Check all the statements below that are negations of this statement. It is not the case that the dress is yellow The dress is not blue The dress is multicolored(b) Consider the following conditional statement: If Mary is wearing tennis shoes, then Mary has been exercising. What is the conclusion of this statement? Mary is not wearing gym shorts Mary has never exercised It is not true that Mary is wearing gym shorts Mary is wearing tennis shoes Mary has been exercising PLZ HELP 100 POINTS AND DONT BE MEAN