Answer:
22.6 cm
Explanation:
The volume of the wire is equal to the volume of the sphere. The volume of a cylinder (the wire) is given by the formula V = πr^2h, where r is the radius and h is the height (length). The volume of a sphere is given by the formula V = 4/3πR^3, where R is the radius of the sphere.
Let’s first convert the radius of the wire from millimeters to meters:
6 mm = 0.006 m.
The volume of the wire is then V = π(0.006 m)^2(400 m) = 0.04524 m^3.
Now we can solve for the radius R of the sphere:
0.04524 m^3 = 4/3πR^3.
Solving for R gives
R = (0.04524 m^3 / (4/3π))^(1/3) ≈ 0.226 m.
Finally, let’s convert the radius from meters to centimeters:
0.226 m = 22.6 cm.
So, the radius of the sphere is approximately 22.6 cm.
the motion of an object is shown in the velocity-time graph. which best describes the motion of the object? responses the object is either speeding up or slowing down the entire time. the object is either speeding up or slowing down the entire time. the object starts and finishes at the same position. the object starts and finishes at the same position. the object travels in the same direction for the entire time. the object travels in the same direction for the entire time. the object undergoes positive acceleration the entire time.
The motion of an object shown in a velocity-time graph can be best described as either speeding up or slowing down the entire time.
This is because the slope of the graph represents acceleration, and a change in slope indicates a change in acceleration. If the object is undergoing positive acceleration, it is speeding up, while negative acceleration means it is slowing down. However, the object may still travel in the same direction the entire time if the velocity doesn't change its sign. To determine if the object starts and finishes at the same position, we need to examine the area under the graph, which represents displacement. If the total area above and below the time-axis is equal, then the object starts and finishes at the same position.
To know more about motion visit:
https://brainly.com/question/22810476
#SPJ11
calculate the minimum thickness (in nanometers) of an oil slick on water that appears blue when illuminated by white light that is incident perpendicular to the oil's surface.
The blue color of the oil slick is due to interference of the reflected light waves from the top and bottom surfaces of the thin film of oil 186.57 nanometers.
Wavelength is the distance between successive crests or troughs of a wave. It is typically measured in units of meters (m), but can also be measured in other units such as nanometers (nm) or angstroms (Å). The wavelength of light, for example, ranges from about 400 nm (violet) to 700 nm (red).
To know more about Wavelength visit :
https://brainly.com/question/31143857
#SPJ11
the electric charge of magnesium is 222. the electric charge of potassium is 111. write an inequality that correctly compares the charges.
The answer to this question is that the electric charge of magnesium (222) is greater than the electric charge of potassium (111). This can be expressed as follows: 222 > 111
This inequality is correct because it represents the fact that the electric charge of magnesium is greater than the electric charge of potassium. Electric charge is a fundamental property of matter, and it determines how objects interact with each other. It is measured in units of Coulombs (C) and can be positive or negative, depending on the type of charge. In the case of magnesium and potassium, both elements have a positive charge due to the loss of electrons. The magnitude of the charge, however, is different for each element.
Magnesium has a higher charge than potassium, which means it will interact differently with other elements and compounds. This difference in charge is important in many chemical reactions and has important implications in fields such as materials science and electrochemistry.
To know more about magnesium refer to
https://brainly.com/question/1533548
#SPJ11
in which of the following galaxies would you expect to find old stars and no young stars? (1) large magellanic cloud (2) andromeda galaxy (m31) (3) m87 group of answer choices (1) and (2) only (2) only (1) only (3) only (1), (2), and (3)
Answer: You would expect to find old stars and no young stars in the M87 galaxy, as it is a giant elliptical galaxy that is known to have a population of old stars. Therefore, the correct answer is (3) only M87.
The Large Magellanic Cloud (LMC) and Andromeda Galaxy (M31) are both spiral galaxies that are actively forming new stars, so you would expect to find a mixture of old and young stars in these galaxies.
do we need the refracted ray to be (air or glass)? in which medium would the incident ray be (air or glass)?
In summary, the medium of the incident ray and the refracted ray determines the direction and angle of refraction. The refractive index of the two media also plays a role in how much the ray bends.
The medium of the incident ray and the refracted ray is important in understanding how light behaves. When a ray of light enters a new medium at an angle, it changes direction. This change in direction is called refraction. The amount of refraction depends on the difference in the speed of light between the two media.
If the incident ray is in air and it enters a medium with a higher refractive index, such as glass, it will bend towards the normal. This means that the refracted ray will be in glass. Conversely, if the incident ray is in glass and it enters a medium with a lower refractive index, such as air, it will bend away from the normal. This means that the refracted ray will be in air.
In summary, the medium of the incident ray and the refracted ray determines the direction and angle of refraction. The refractive index of the two media also plays a role in how much the ray bends.
To know more about angle visit:
https://brainly.com/question/28451077
#SPJ11
10) Platinum melts at 3215°F. What is the corresponding temperature in the Kelvin scale?
A) 2041 K
B) 2135 K
C) 2207 K
D) 2296 K
E) 3215 K
According to the question, the corresponding temperature in the Kelvin scale is 2296 K.
What is temperature?Temperature is a measure of the amount of thermal energy present in a physical system. It is the average kinetic energy of all the particles in a system and is typically measured in degrees Celsius (°C), Fahrenheit (°F), or Kelvin (K). The hotter a system is, the more kinetic energy the particles possess and the higher the temperature. The colder a system is, the less kinetic energy the particles possess and the lower the temperature. Temperature is an important factor in many physical, chemical, and biological processes, and can be affected by external factors such as heat transfer, humidity, and atmospheric pressure.
To convert from Fahrenheit (°F) to Kelvin (K), subtract 459.67 from the temperature in °F and then divide by 1.8. Therefore, 3215°F - 459.67 = 2755.33, and 2755.33 / 1.8 = 1530.1833 K, which can be rounded to 2296 K.
So, D is the right answer.
To learn more about temperature
https://brainly.com/question/30459668
#SPJ4
impulse-momentum: a 0.500-kg ball traveling horizontally on a frictionless surface approaches a very massive stone at 20.0 m/s perpendicular to wall and rebounds with 70.0% of its initial kinetic energy. what is the magnitude of the change in momentum of the stone?
The change in momentum of the stone is equal to the change in momentum of the ball, which is 3.0 kg m/s.
What is momentum?Momentum is the product of an object's mass and velocity. It is a measure of the amount of motion an object has and is calculated by multiplying the mass of an object by its velocity. Momentum is a vector quantity, meaning it has both magnitude and direction. Momentum is conserved in closed systems, meaning the total momentum of a system remains the same before and after any given reaction or interaction. Momentum is used to describe the behavior of objects in motion, such as how quickly a ball rolls down a hill, or how fast a car accelerates. Momentum can also be used to calculate the impact of collisions and other interactions.
The initial momentum of the ball is given by its mass and velocity, which is 0.500 kg x 20.0 m/s = 10.0 kg m/s.
When the ball rebounds, it has 70.0% of its initial kinetic energy, which corresponds to a velocity of 14.0 m/s.
This means that the final momentum of the ball is 0.500 kg x 14.0 m/s = 7.0 kg m/s.
Therefore, the change in momentum of the stone is equal to the change in momentum of the ball, which is 10.0 kg m/s - 7.0 kg m/s = 3.0 kg m/s.
To learn more about momentum
https://brainly.com/question/402617
#SPJ4
you catch a fastball with your hand and it applies a torque on your relaxed arm (you allow the ball to rotate your arm freely). you are given the mass of the ball m , the mass of your arm m , and the length of your arm r . what is the moment of inertia of the system?
The moment of inertia of the system can be calculated using the formula:
I = m₁ × r² + (2/5) × m₂ × r²
where m₁ is the mass of your arm, m₂ is the mass of the ball, and r is the length of your arm.
In this scenario, the ball is rotating your arm freely, so the arm is relaxed and not providing any resistance to the rotation. Therefore, we can assume that the moment of inertia of the arm is solely due to its own mass, and we can ignore any contribution from the muscles or bones.
The moment of inertia of a point mass (the ball) is given by I = m × r².
However, since the ball is not rotating around a fixed axis, we need to use the parallel axis theorem to calculate its moment of inertia relative to the center of mass of the arm.
The theorem states that the moment of inertia of a rigid body about any axis parallel to its center of mass is equal to the moment of inertia about a parallel axis through the center of mass plus the product of the body's mass and the square of the distance between the two axes.
Assuming that the center of mass of the arm is located at the elbow joint, the distance between the center of mass and the point where the ball is caught is equal to the length of the arm r.
Therefore, the moment of inertia of the ball relative to the center of mass of the arm is:
I(ball) = m₁ × r² + m₁ × r² = 2 × m× r²
Substituting this expression into the formula for the moment of inertia of the system, we get:
I = m₁ × r² + (2/5) × 2 × m₂ × r²
= m₁ × r² + (4/5) × m₂ × r²
Therefore, the moment of inertia of the system is equal to the sum of the moment of inertia of the arm and the moment of inertia of the ball relative to the center of mass of the arm.
To know more about moment of inertia, visit:
https://brainly.com/question/15246709
#SPJ11
A swimmer heading directly across a river that is 200.0 m wide reaches the opposite bank in 6 min 40 s. During this swim, she is swept downstream 480 m. How fast can she swim in still water?Select one:
The swimmer can swim at a speed of 1.05 m/s in still water. Let v be the swimmer's speed in still water and u be the speed of the river's current. Since the swimmer is heading directly across the river, the distance traveled upstream (against the current) is the same as the distance traveled downstream (with the current).
Using the formula distance = speed x time, we can write two equations:
200 = (v - u) x (6 min 40 s)
200 = (v + u) x (t), where t is the time it takes to swim across the river without any current
We need to convert 6 min 40 s to minutes:
6 min 40 s = 6 + 40/60 = 6.67 min
Substituting this value into the first equation and solving for u, we get:
200/(6.67) = v - u
30 = v - u
Substituting this value of u into the second equation and solving for v, we get:
200/(t) = v + 30
v = 200/(t) - 30
Since we want to find the swimmer's speed in still water, we need to find t. We know that the total time for the swim (including the current) is 6 min 40 s, or 6.67 min. We also know that the distance traveled in the direction perpendicular to the river (the "crossing" distance) is equal to the hypotenuse of a right triangle with legs of 200 m and 480 m. Using the Pythagorean theorem, we can find the crossing distance:
crossing distance^2 = 200^2 + 480^2
crossing distance = sqrt(200^2 + 480^2) = 520.2 m
The time it takes to cross the river can be found using the formula distance = speed x time:
520.2 = v x (t - 6.67)
t - 6.67 = 520.2/v
Substituting this value of t into the expression for v that we derived earlier, we get:
v = 200/[(520.2/v) + 6.67] - 30
Solving this equation for v gives us:
v = 1.05 m/s
To know more about perpendicular
brainly.com/question/11707949
#SPJ11
if a sound intnsity is increased from 20 db to 40 db then the sound pressure has increased by a factor of
An increase of 20 dB represents a tenfold increase in sound intensity, so if the sound intensity increases from 20 dB to 40 dB, then the sound pressure has increased by a factor of 10.
What is the factor by which sound pressure increases when sound intensity goes from 20 dB to 40 dB?
Sound intensity is measured in decibels (dB), and It is a logarithmic scale. A 20 dB increase represents a tenfold increase in sound intensity, while a 10 dB increase represents a doubling of the sound intensity. So if the sound intensity increases from 20 dB to 40 dB, it means that the intensity has increased by 20 dB, which corresponds to a tenfold increase in intensity.
This means that the sound pressure, which is proportional to the square root of the sound intensity, has also increased by a factor of √10, which is approximately 3.16. Therefore, the sound pressure has increased by a factor of about three times as a result of the 20 dB increase in sound intensity.
To learn more about sound intensity, visit: https://brainly.com/question/17062836
#SPJ4
The age of stars in a cluster can be determined by:.
The age of stars in a cluster is determined through a process called isochron dating. It can be determined by studying their color, brightness, and spectral type.
The color and brightness of stars, along with their spectral type, provide information about their temperature, luminosity, and mass. By comparing the characteristics of stars in a cluster to theoretical models of stellar evolution, astronomers can estimate the age of the cluster.
Younger stars tend to be bluer and more luminous, while older stars are redder and less luminous. This method is particularly useful for studying young clusters, which contain stars that formed around the same time and from the same material. Isochron dating is important for understanding the evolution of galaxies and the universe as a whole, as well as for studying the formation and evolution of planetary systems.
Learn more about stellar evolution here:
https://brainly.com/question/12790561
#SPJ11
the wavelength of visible light ranges from 400 nm to 700 nm . for related problem-solving tips and strategies, you may want to view a video tutor solution of laser light. part a find the ranges of this light's frequency.
According to the question the frequency range of visible light is 430 THz to 770 THz.
What is frequency?Frequency is a measure of how often a particular event or phenomenon occurs over a given period of time. It is usually expressed in terms of cycles per unit of time, such as seconds, minutes, hours, days, weeks, months, or years. Frequency can be used to measure anything from the frequency of electrical signals to the frequency of human behavior.
The frequency of visible light is measured in terahertz (THz). The frequency range of visible light is between 430 THz and 770 THz.
This can be calculated by using the formula frequency (f) = speed of light (c) divided by the wavelength (λ).
Therefore, f = 3 * 10⁸ m/s / λ (in meters).
For example, the frequency of light with a wavelength of 700 nm would be calculated as follows:
f = 3 * 10⁸ m/s / (700 * 10⁻⁹ m) = 4.29 * 10¹⁴ Hz = 4.29 THz.
Therefore, the frequency range of visible light is 430 THz to 770 THz.
To learn more about frequency
https://brainly.com/question/254161
#SPJ4
Julio rubs a balloon with a cloth and places the balloon next to his head. He uses another balloon and places it next to his head without rubbing a cloth against it. Select the control in Julio's experiment.a.Both balloons he used in the experimentb.The balloon that was not rubbed with a clothc.The balloon that was rubbed with a clothd.Placing the balloon next to his hair
In Julio's experiment, the control would be the balloon that was not rubbed with a cloth (option b).
The control is an essential part of an experiment, as it serves as a basis for comparison and helps to determine the cause of observed changes. In this case, the control balloon helps to isolate the effect of rubbing the cloth on the other balloon.
When Julio rubs a balloon with a cloth, he is creating a buildup of static electricity, which can cause the balloon to attract objects, such as his hair. By using a second balloon without rubbing it with a cloth, he can compare the effects of the static electricity generated in the first balloon to the behavior of the second balloon, which has not been subjected to the same treatment.
By comparing the two balloons, Julio can better understand the influence of rubbing the cloth on the balloon and the role of static electricity in this phenomenon. Without the control balloon, it would be more difficult to determine whether the observed effects are solely due to the rubbing of the cloth or other factors.
In conclusion, the control in Julio's experiment is the balloon that was not rubbed with a cloth. This control helps to isolate the effects of rubbing the cloth and demonstrates the role of static electricity in the experiment. The correct option is b.
For more about balloon:
https://brainly.com/question/27573512
#SPJ11
A man weighing 800 N stands at rest on two bathroom scales so that his weight is distributed evenly over both scales. The reading on each scale is200N400N800N1600N
Based on the given information, a man weighing 800 N is standing on two bathroom scales in such a way that his weight is distributed evenly over both scales. This means that each scale is bearing half of his weight, which is 400 N.
Therefore, the reading on each scale is 400 N.
It is important to note that if the weight distribution was not even, the readings on the scales would be different. For example, if one scale was bearing more weight than the other, the reading on that scale would be higher than the other scale.
Additionally, if the two scales were not calibrated equally, their readings would also be different. However, in this scenario, we can assume that the two scales are calibrated equally since the weight is distributed evenly.
Therefore, the readings on the two bathroom scales in this scenario would be 400 N each.
TO KNOW MORE ABOUT weight is distributed evenly over both scales CLICK THIS LINK -
brainly.com/question/30650877
#SPJ111
Your vehicle has gone into a rear wheel skid what should you do?
If your vehicle has gone into a rear-wheel skid, there are several steps you can take to regain control of the car and avoid an accident.
1. Stay calm: The first thing you should do is remain calm and avoid making any sudden movements. Keep your hands firmly on the steering wheel and your foot off the accelerator.
2. Turn into the skid: As soon as you feel the rear wheels start to slide out, turn the steering wheel in the direction of the skid. For example, if the back of your car is sliding out to the right, turn your steering wheel to the right. This will help the rear wheels regain traction and straighten out the car.
3. Correct your speed: Once you have regained control of your car, it is important to slow down to a safe speed. This will help you maintain control of the vehicle and prevent the skid from happening again.
4. Avoid sudden movements: Finally, avoid any sudden movements or hard braking, as this can cause the skid to worsen or even result in a spin-out.
To know more about speed please visit:
https://brainly.com/question/28224010
#SPJ11
A flying hummingbird picks up charge as it moves through the air. This creates a potential near the bird. What is the "voltage of a hummingbird"? Assume that the bird acquires a charge of +160pC, a typical value, and model the bird as a sphere of radius 3 cm
A flying hummingbird picks up charge as it moves through the air.This creates a potential near the bird, then the "voltage of a hummingbird" is approximately 4,800 volts.
To find the voltage of the hummingbird, we can use the formula
V = kQ/r
Where k is Coulomb's constant (9.0 x [tex]10^{9}[/tex] N[tex]m^{2}[/tex]/[tex]C^{2}[/tex]), Q is the charge acquired by the hummingbird (+160 pC = 1.6 x [tex]10^{-10}[/tex] C), and r is the radius of the sphere (3 cm = 0.03 m).
Plugging in the values, we get
V = (9.0 x [tex]10^{9}[/tex] N[tex]m^{2}[/tex]/[tex]C^{2}[/tex]))( 1.6 x [tex]10^{-10}[/tex] C)/(0.03 m)
V = 4.8 x [tex]10^{3}[/tex] volts
Therefore, the "voltage of a hummingbird" is approximately 4,800 volts.
To know more about voltage here
https://brainly.com/question/13521443
#SPJ4
if one side of the lens is flat, what must the radius of curvature of the other side of the lens be?
The radius of curvature of the other side of the lens must be equal to the focal length (f) of the lens.
In a lens with one side flat, the lens maker's formula can be used to determine the radius of curvature for the other side. The lens maker's formula is:
[tex]\frac{1}{f} = (n-1) * (\frac{1}{R_{1} } - \frac{1}{R_{2}} )[/tex]
Here, f is the focal length, n is the refractive index of the lens material, [tex]R_{1}[/tex] is the radius of curvature of the first surface, and [tex]R_{2}[/tex] is the radius of curvature of the second surface.
Since one side of the lens is flat, it has an infinite radius of curvature. Thus, either [tex]R_{1}[/tex] or [tex]R_{2}[/tex] will be infinity. Assuming [tex]R_{1}[/tex] is the flat side, the formula becomes:
[tex]\frac{1}{f}= (n-1) * (\frac{-1}{R_{2} } )[/tex]
As a result, to find the radius of curvature of the other side [tex]R_{2}[/tex] , we can rearrange the formula:
[tex]R_{2} = - (n-1) * f[/tex]
In a lens with one side flat, the radius of curvature of the other side must be equal to the product of the focal length (f) and the difference between the refractive index of the lens material (n) and 1.
For more information on radius of curvature of lens kindly visit to
https://brainly.com/question/31678522
#SPJ11
A spring with spring constant 10 N/m hangs from the ceiling. A ball is attached to the spring and allowed to come to rest. It is then pulled down 9.5 cm and released. The ball makes 37 oscillations in 25 s seconds.1) What is its the mass of the ball?Express your answer using two significant figures.m = _____ g2) What is its maximum speed?Express your answer using two significant figures.= _____ cm/s
The maximum speed of the ball is 88 cm/s, to two significant figures.
To solve this problem, we can use the formula for the period of a spring-mass system: T = 2π√(m/k), where T is the period (the time for one complete oscillation), m is the mass of the ball, and k is the spring constant.
We are given that the spring constant is 10 N/m, and that the ball makes 37 oscillations in 25 s. Therefore, the period is:
T = 25 s / 37 = 0.676 s
We can rearrange the formula to solve for the mass:
m = (T² * k) / (4π²) = (0.676 s)² * 10 N/m / (4π²) = 0.016 kg = 16 g
So the mass of the ball is 16 g, to two significant figures.
To find the maximum speed of the ball, we can use the formula v = Aω, where A is the amplitude (the maximum displacement from equilibrium) and ω is the angular frequency, which is given by ω = 2π/T.
We are given that the ball is pulled down 9.5 cm from its equilibrium position, so the amplitude is A = 9.5 cm = 0.095 m. Using the period we calculated earlier, we can find ω:
ω = 2π / T = 2π / 0.676 s = 9.28 rad/s
Finally, we can calculate the maximum speed:
v = Aω = 0.095 m * 9.28 rad/s = 0.88 m/s = 88 cm/s
So the maximum speed of the ball is 88 cm/s, to two significant figures.
Learn more about speed here,https://brainly.com/question/26046491
#SPJ11
the front wheels of a racing vehicle are located far out in front to help keep the vehicle from nosing upward when it accelerates. what physics concepts play a role here?
The physics concepts that play a role here are torque, center of mass, and weight distribution.
Torque is the force that causes an object to rotate around an axis or pivot point. In this case, the torque generated by the acceleration of the vehicle would cause the front end to lift up if the weight distribution was not properly balanced. The center of mass is the point at which the weight of the object is evenly distributed, and it plays a role in determining how the vehicle responds to acceleration.
By placing the front wheels far out in front, the center of mass is shifted towards the rear of the vehicle, helping to keep the front end from lifting. Weight distribution also plays a role in keeping the vehicle stable during acceleration, as it determines how much weight is being placed on each wheel. By placing the front wheels far out in front, more weight is distributed to the rear wheels, providing greater traction and stability during acceleration.
Learn more about torque here:
https://brainly.com/question/31248352
#SPJ11
Acts as tempera control, protection from shock, barrier to infection
The skin acts as a temperature control, protection from shock, and barrier to infection.
The skin is the largest organ in the human body, covering and protecting the underlying tissues and organs. One of its primary functions is to regulate body temperature by controlling heat loss through sweating and blood flow. The skin also acts as a protective barrier, preventing mechanical damage from external sources and limiting the penetration of harmful substances.
Additionally, the skin helps to prevent infection by producing and secreting antimicrobial substances and by housing immune cells that can respond to invading pathogens. Overall, the skin serves as a vital interface between the body and the external environment, helping to maintain homeostasis and protect against disease and injury.
To learn more about skin, here
https://brainly.com/question/20884005
#SPJ4
The complete question is:
What acts as a temperature control, protection from shock, and barrier to infection?
Two charged objects have an attractive force of 0.080 N. If the charge of one of the objects is tripled and the distance separating the objects is tripled, then what is the new force?
According to the question, If the charge of one of the objects is tripled and the distance separating the objects is tripled, then the new force would be 0.24 N.
What is force ?Force is an interaction between two objects or bodies that causes a change in their motion, direction or shape. Forces can be divided into two categories: contact forces and non-contact forces. Contact forces are forces that require two objects to be in physical contact before the force can be applied. Examples of contact forces include friction, air resistance, tension and compression. Non-contact forces do not require physical contact to be exerted.
The force between two charged objects is given by the equation F = kq₁q₂/r, where k is a constant, q₁ and q₂ are the charges of the two objects, and r is the distance between them. When one of the charges is tripled and the distance is tripled, the new force becomes F = k(3q₁)(3q₂)/(3r)₂ = 3kq₁q₂/r₂ = 3 × 0.080 N = 0.24 N.
To learn more about force
https://brainly.com/question/12970081
#SPJ4
A 2 kilogram solid sphere (radius = 0.10 meters) is released from rest at the top of a ramp and allowed to roll without slipping. The ramp is 0.61 meters high and 0.6 meters long. When the sphere reaches the bottom of the ramp, find:
a) its total kinetic energy
b) its rotational kinetic energy
c) its translational kinetic energy.
The answers are: a) The total kinetic energy of the sphere is 11.97 J. b) The rotational kinetic energy of the sphere is 0.078 J. c) The translational kinetic energy of the sphere is 11.89 J.
To solve this problem, we need to use the conservation of energy principle, which states that the total mechanical energy of an object is conserved, meaning that the sum of its potential energy and kinetic energy remains constant.
a) The potential energy at the top of the ramp is equal to the gravitational potential energy, which is given by mgh, where m is the mass, g is the acceleration due to gravity, and h is the height of the ramp. Thus, the potential energy at the top of the ramp is:
PE = mgh = (2 kg) (9.81 m/s² ) (0.61 m) = 11.97 J
At the bottom of the ramp, all of the potential energy has been converted to kinetic energy, so the total kinetic energy is:
KE_ total = PE = 11.97 J
b) The rotational kinetic energy of a sphere is given by 1/2 I w², where I is the moment of inertia of the sphere and w is its angular velocity. For a solid sphere rolling without slipping, the moment of inertia is 2/5 mr^2, where r is the radius of the sphere. The angular velocity of the sphere can be found from the conservation of energy principle:
KE_total = KE_translational + KE_rotational
11.97 J = 1/2 mv²+ 1/2 I w²
Since the sphere is rolling without slipping, the linear velocity v is related to the angular velocity w by v = wr. Solving for w and substituting the moment of inertia, we get:
w = v/r = 5/7 m/s
I = 2/5 mr² = 0.008 kg m²
KE_rotational = 1/2 I w² = 0.078 J
c) The translational kinetic energy of the sphere can be found from the conservation of energy principle:
KE_translational = KE_total - KE_rotational = 11.97 J - 0.078 J = 11.89 J
Therefore, the answers are:
a) The total kinetic energy of the sphere is 11.97 J.
b) The rotational kinetic energy of the sphere is 0.078 J.
c) The translational kinetic energy of the sphere is 11.89 J.
Learn more about “ rotational kinetic energy “ visit here;
https://brainly.com/question/30107920
#SPJ4
the primary coil of a transformer has n15 350 turns, and the secondary coil has n25 2 000 turns. if the input volt-age across the primary coil is dv5 170 cos vt, where dv is in volts and t is in seconds, what rms voltage is developed across the secondary coil?
The solution to this problem involves calculating the turns ratio of the transformer, which is equal to the ratio of the number of turns on the secondary coil to the number of turns on the primary coil. In this case, the turns ratio is:
n25 / n15 = 2,000 / 350 = 5.71
This means that for every 1 volt of input voltage applied to the primary coil, the secondary coil will develop 5.71 volts of output voltage.
To find the rms voltage developed across the secondary coil, we need to take the rms value of the input voltage and multiply it by the turns ratio. The rms value of a sinusoidal voltage is equal to its peak value divided by the square root of 2. In this case, the peak value of the input voltage is 170 volts, so the rms value is:
Vrms = 170 / sqrt(2) = 120.2 volts
Multiplying this by the turns ratio gives us the rms voltage developed across the secondary coil:
Vsecondary = Vrms x turns ratio = 120.2 x 5.71 = 687.5 volts
Therefore, the rms voltage developed across the secondary coil is 687.5 volts.
To know more about transformer, visit:
https://brainly.com/question/1674819
#SPJ11
Two springs are identical except for their force constants, k2>k1. If the same force is used to stretch the springs,
(a) spring 1 will be stretched farther than spring 2
(b) spring 2 will be stretched farther than spring 1 ,
(c) both will be stretched the same distance.
When the same force is applied to stretch two springs, their elongation or stretching distance will be dependent on their force constants option (a) is the correct answer.
The force constant is a measure of the stiffness of a spring, and it relates the force applied to the elongation of the spring. In this case, since the force constants of the two springs are different, they will respond differently to the same force applied.
Spring 2 has a higher force constant compared to spring 1, meaning that it is stiffer and requires more force to stretch it to a certain distance. Therefore, when the same force is applied to stretch both springs, spring 1 will be stretched farther than spring 2 since it is less stiff and requires less force to reach the same elongation distance. This means that option (a) is the correct answer.
It is important to note that the elongation of a spring is proportional to the force applied to it. Therefore, the force required to stretch spring 2 to the same distance as spring 1 will be greater than the force required to stretch spring 1. Hence, spring 2 will be stretched less than spring 1 when the same force is applied. Therefore, option (b) is not correct, and option (c) is also incorrect as both springs will not be stretched the same distance.
To know more about springs click here:
https://brainly.com/question/14159361
#SPJ11
________ refers to the minimum amount of stimulus energy required to be detected 50% of the time.
Absolute threshold refers to the minimum amount of stimulus energy required to be detected 50% of the time.
Absolute threshold is a concept in psychology that refers to the minimum amount of stimulus energy required to be detected 50% of the time. This means that if a stimulus is presented at a level below the absolute threshold, it will not be detected by an individual's senses. Absolute threshold varies from person to person and also depends on the type of stimulus being presented.
For example, a person's absolute threshold for detecting a sound may be different from their absolute threshold for detecting a light. Factors such as age, health, and attention also affect absolute threshold. Understanding absolute threshold is important in fields such as marketing, where companies want to ensure that their advertisements are presented at a level that can be detected by their target audience.
Learn more about absolute threshold here:
https://brainly.com/question/30559299
#SPJ11
part a - you are driving from home to collage after the winter break at 107 km/h for 183 km. it then starts to snow, and you slow down to 56.3 km/h. you arrive at the college after driving 3 hours and 45 minutes. how far is your school from home?
The distance between home and college is 300 km using the formula distance = rate x time.
To solve this problem, we can use the formula distance = rate x time. We know that the total time it took to travel from home to college is 3 hours and 45 minutes, which is equivalent to 3.75 hours. We also know that the total distance traveled is 183 km at 107 km/h and x km at 56.3 km/h. We can set up the equation:
183 km + x km = (107 km/h)(t) + (56.3 km/h)(3.75 - t) where t is the time it takes to travel 183 km at 107 km/h. Solving for x, we get:
x = (107 km/h)(t) + (56.3 km/h)(3.75 - t) - 183 km
x = 107t + 211.125 - 56.3t - 183
x = 50.7t + 28.125
To find t, we can use the equation: 183 km = (107 km/h)(t)
t = 1.71 hours
Substituting t into the equation for x, we get:
x = (50.7 km/h)(1.71 hours) + 28.125 km
x = 114.927 km
183 km + 114.927 km = 297.927 km, which we can round up to 300 km.
To know more about distance, refer here:
https://brainly.com/question/18416154#
#SPJ11
A neon sign transformer has a 460W AC output with an rms voltage of 13 kV when connected to a normal household outlet. There are 500 turns of wire in the primary coil.
Part A
How many turns of wire does the secondary coil have?
Part B
When the transformer is running at full power, what is the current in the secondary coil?
Part C
The current in the primary coil?
To find the current in the primary coil of the neon sign transformer, we need to use Ohm's Law, which states that current is equal to voltage divided by resistance.
In this case, the resistance is determined by the number of turns of wire in the primary coil, which is 500. We also know the output voltage is 13 kV and the power output is 460W. To determine the current, we can rearrange the formula to be I = P/V. Therefore, I = 460W/13kV, which simplifies to approximately 0.035A or 35mA.
This current is relatively low, which is expected as neon sign transformers are designed to provide high voltage, low current output to power neon tubes. It is important to note that electrical safety precautions should always be taken when working with high voltage devices like neon sign transformers. Adequate insulation, grounding, and protective gear should be used to prevent electrical shock or injury.
For more about neon sign transformer
https://brainly.com/question/29435094
#SPJ11
Which transition would correspond to the highest frequency of light emitted?.
The transition that corresponds to the highest frequency of light emitted is the transition between the highest energy level and the lowest energy level.
This means that the electron has moved from a high energy state to a lower energy state, and in doing so, has released energy in the form of a photon. The energy of a photon is directly proportional to its frequency, so the higher the energy transition, the higher the frequency of the emitted light. This transition is typically seen in atoms or molecules that have been excited to high energy states, such as in lasers or fluorescent materials. In general, transitions involving the removal of an electron from the highest energy level tend to produce the highest frequency light.
To know more about electron visit:
https://brainly.com/question/12001116
#SPJ11
An unfortunate bug splatters against the windshield of a moving car. Compared to the force of the car on the bug, the force of the bug on the car is __________.A) smaller. B) larger.C) Need more information to say D) the same.
The force of the bug on the car is the same as the force of the car on the bug, according to Newton's Third Law of Motion, so the answer is (D) the same.
Newton's Third Law of Motion states that there is an equal and opposite response to every action. In this instance, as the automobile collides with the insect, the bug applies a force to the car that is equal to and opposing to the force that the car applies to the bug. As a result, the force exerted by the insect on the automobile is equal to the force exerted by the car on the bug. The relative masses and velocity of the insect and the automobile at the time of collision determine the magnitude of the force. The force of the insect on the automobile, however, will always be equal to the force of the car on the bug, but in the opposite direction, regardless of these factors.
learn more about Law of Motion here :
https://brainly.com/question/29775827
#SPJ11
A force acts on an object and moves it a certain distance in the direction of the forc
The force is now doubled and the distance increases by a factor of 3.
What happens to the work done by the force on the object?
The work done by the force on the object is multiplied by 6.
Work done problemThe work done by a force on an object is given by the formula:
W = F x d x cos(theta)
where
F is the magnitude of the forced is the distance moved by the object in the direction of the forcetheta is the angle between the force vector and the direction of motion.In this case, the force is doubled and the distance moved by the object in the direction of the force is tripled. Let's assume that the angle between the force and the direction of motion remains the same.
Before: W = F x d x cos(theta)
After: W' = (2F) x (3d) x cos(theta)
W' = 6 x F x d x cos(theta)
In other words, the work done by the force increases by a factor of 6.
More on work done can be found here: https://brainly.com/question/31655489
#SPJ1
