An ecologist recorded 12 white-tailed deer, Odocoileus virginianus, per square kilometer in one woodlot and 20 per square kilometer in another woodlot. What was the ecologist comparing?
A) Density
B) Range
C) Cohorts
D) Dispersion
E) Carrying capacity

Speed = 92.6 km/2.9 hours = 32.0 km/h

x-component of velocity = 32.0 km/h * cos(29.3 degrees) = 29.4 km/h

y-component of velocity = 32.0 km/h * sin(29.3 degrees) = 16.0 km/h

Velocity components are vector quantities that describe the direction and magnitude of an object's motion. The total velocity of an object can be determined by adding the components that make up its total velocity. These components are often referred to as x-velocity and y-velocity, which represent the speed of the object in a certain direction. The magnitude of these components is determined by the speed of the object and the angle it is traveling at. The two components of velocity can be combined to calculate the total velocity of an object.

Distance = 92.6 km

Time = 2.9 h

To calculate the velocity, divide the distance by the time:

velocity = 92.6/2.9 = 32 km/h

To calculate the x component of the velocity, use trigonometry:

vx = 32cos(29.3) = 29.4 km/h

To calculate the y component of the velocity,use trigonometry:

vy = 32sin(29.3) = 16.8 km/h

Therefore, the bird's velocity is 29.4 km/h in the x direction and 16.8 km/h in the y direction.

To know more about Velocity component, visit:

https://brainly.com/question/24681896

#SPJ4

The mass of the wagon is 2000 kg.

What is mass?

Mass is a measure of the amount of matter in an object. It is a scalar quantity, which means it has only magnitude and no direction. Mass is a fundamental property of matter and is conserved in all physical processes. The unit of mass in the International System of Units (SI) is the kilogram (kg).

We can use the equation of motion to find the mass of the train wagon:

Δv = a * Δt

where Δv is the change in velocity (5.6 m/s - 2.4 m/s = 3.2 m/s), Δt is the change in time (2 s), and a is the acceleration.

We can use the force equation to find the acceleration:

F = m * a

where F is the force acting on the wagon (3200 N) and m is the mass of the wagon.

We can substitute the acceleration from the second equation into the first equation:

Δv = F / m * Δt

We can now solve for the mass of the wagon:

m = F / a * Δt = 3200 / (Δv / Δt) = 3200 / (3.2 / 2) = 3200 / 1.6 = 2000 kg

So the mass of the wagon is 2000 kg.

To learn more about mass:

https://brainly.com/question/19385703

#SPJ1

Magnification is the process of enlarging something. Additionally, it means expanding the seeming size rather than the actual size. It is possible to measure this expansion.

To find the overall magnification of the system, we can use the formula:

M = M1 x M2

where M1 is the magnification of the first lens, and M2 is the magnification of the second lens.

In this case, the first lens has a magnification of -2, which means it produces an inverted image that is two times smaller than the object. So, we have:

M1 = -2

The second lens has a magnification of 3, which means it produces an upright image that is three times larger than the object. So, we have:

M2 = 3

Using the formula, we can calculate the overall magnification of the system:

M = M1 x M2

M = (-2) x 3

M = -6

Therefore, the overall magnification of the system is -6. This means that the final image is inverted and six times smaller than the object.

To know more about magnification visit:

https://brainly.com/question/29056255

#SPJ4

The kinetic energy of the box after it has slid through the rough spot is 12.5 J.

The initial kinetic energy of the box is 12 J.

When the box encounters the rough spot on the floor, a frictional force of 2 N acts on it in the opposite direction to its motion. The work done by this frictional force is:

work done by friction = force x distance x cos(theta)

where "theta" is the angle between the force and the displacement, which is 180 degrees in this case (since the force is opposite to the direction of motion). Therefore, cos(theta) = -1.

Plugging in the values, we get:

work done by friction = 2 N x 0.25 m x (-1) = -0.5 J

Since the work done by the frictional force is negative, it reduces the kinetic energy of the box. Therefore, the final kinetic energy of the box is:

final kinetic energy = initial kinetic energy - work done by friction

final kinetic energy = 12 J - (-0.5 J) = 12.5 J

Therefore, the kinetic energy of the box after it has slid through the rough spot is 12.5 J.

Learn more about kinetic energy here :

brainly.com/question/6758980

#SPJ4

The required gravitational force acting on the metal sphere from the earth is calculated to be 0.049 N.

The mass of the sphere is given as 5 g = 5/1000 = 0.005 kg

We know the relation for gravitational force as,

F = G M m/r²

where,

G is the gravitational constant (6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻²)

M is the mass of the earth (6 × 10²⁴ kg)

m is the mass of the object

r is the radius of the earth (6.4 × 10⁶ m)

Entering the values into the above equation,

F = G M m/r² = (6.67 × 10⁻¹¹ ×6 × 10²⁴ × 0.005)/(6.4 × 10⁶)² = (0.2001× 10¹³)/(40.96 × 10¹²) = 0.049 N

Thus, the gravitational force is calculated to be 0.049 N.

To know more about gravitational force:

https://brainly.com/question/15415506

#SPJ4

People should be encouraged to use energy-efficient electrical devices. Because  energy effective electrical devices uses more energy than energy-efficient electrical devices.

    70% of Electrical power generated from non renewable sources. More energy requires more non-renewable resources it leads to produce more green house gases. It harms to ozone layer. Ozone layer damage leads increases temperature in the world ,droughts and food insecurity.

Here some of the advantages to use energy-efficient electrical devices.

To know more about, energy-efficient

https://brainly.com/question/7538369

According to traditional theories of probability, each possible result in the sample space has an equal chance of happening. any outcome of rolling a single die has the same chance of happening. Given that there are six possibilities, each has a probability of 1/ 6. Thus, option D is correct.

Without the need for government action, equilibrium conditions are achieved by the forces of supply and demand. According to Law, this premise contends that economic activity results in income sufficient to pay for all of the produce.

The theoretical probability of an event is predicated on the idea that all outcomes are equally likely. The proportion of positive outcomes to all other outcomes in the sample space is known as the theoretical probability of an occurrence.

Therefore, when assigning probabilities on the basis of the presumption that each possible outcome of an experiment has an equal likelihood of occurring, the approach is called as Classical Method.

Learn more about Classical Method here:

https://brainly.com/question/14529134

#SPJ4

Here, the frequency of the swinging is 0.05 Hz and the length of the rope through the which the oscillatory wave is travelling is 99.3 meters.

Frequency of an oscillation is the number of wave cycles per unit time. It is the inverse of time period. As the length of the pendulum increases, the frequency of oscillation decreases. Therefore, the shorter pendulum will have greater frequency.

Given time period of pendulum =20 s.

then length of pendulum L = T²/4π² g.

l = 20²/4×π² × 9.8 m/s² = 99.3 m.

Frequency of the oscillation is the inverse of its time period. Hence, the frequency of the pendulum for a time period of 8 Hz is :

1/20 = 0.05 Hz.

Therefore, the length of the rope is 99.3 m and the frequency of the oscillation is 0.05 Hz.

Find more on frequency:

brainly.com/question/14926605

#SPJ1

The given assertion 'In a series circuit, the current is constant throughout the electric circuit' is correct but the reason 'All electric devices need equal currents to operate properly' is incorrect.

A circuit is said to be connected in series when the same current flows through all the components in the circuit. The current in these circuits only travels along one route.

A higher total voltage is produced by series-connected cells than by single cells. Voltage increases if the number of cells increases. Series circuits do not overheat easily.

All the electrical devices do not require equal amount of current for their functioning. For example, an electric heater and an electric fan do not require the same amount of current.

In a series combination, if one component fails, all other components stop working.

Series connection is not suitable for domestic circuits.

Therefore, while the assertion is true, the reason is false.

To know more about current:

https://brainly.com/question/26018463

#SPJ4

Answer:

Explanation:

Technology has both positive and negative impacts on the environment. Here are some examples of each:

Positive impacts:

Increased energy efficiency: Advances in technology have led to the development of more energy-efficient appliances, vehicles, and industrial processes, reducing energy consumption and greenhouse gas emissions.

Renewable energy: Technology has enabled the development of renewable energy sources such as wind and solar power, reducing our dependence on fossil fuels and reducing the impact of energy production on the environment.

Improved waste management: Technological innovations have improved waste management practices, making it easier to recycle and reduce waste.

Enhanced communication and transportation: Technology has improved communication and transportation, making it easier to access information and resources, reducing the need for travel, and minimizing the environmental impact of transportation.

Negative impacts:

Resource depletion: Technology often requires the extraction and use of natural resources such as minerals, oil, and gas, leading to resource depletion and environmental degradation.

Electronic waste: The increasing use of electronic devices has led to a growing problem of electronic waste, which can contain toxic materials and harm the environment if not disposed of properly.

Climate change: Some technologies, such as fossil fuel-based energy production and transportation, contribute significantly to climate change through the release of greenhouse gases into the atmosphere.

Habitat destruction: The development of technology and infrastructure often requires the destruction of natural habitats, leading to the loss of biodiversity and disruption of ecosystems.

Overall, technology has the potential to have both positive and negative impacts on the environment, and it is important to consider these impacts when developing and using technology in a way that is sustainable and equitable.

It's not entirely clear what specific measurement or system you are referring to, but I can offer some general information about detector coils and their placement in electromagnetic or acoustic systems.

What is Electromagnetic?

Electromagnetic refers to the interplay between electric and magnetic fields, which together form the electromagnetic force, one of the four fundamental forces of nature. This force governs the behavior of charged particles, including electrons and protons, and is responsible for phenomena such as electricity, magnetism, and light.

Electromagnetic radiation, or electromagnetic waves, is a type of energy that is propagated through space via oscillations of electric and magnetic fields. This energy can take many forms, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

A detector coil is often used as part of a pickup or sensing system to measure electromagnetic fields or acoustic waves. It typically consists of a wire coil wrapped around a core material that can detect changes in the magnetic field induced by the electromagnetic or acoustic wave.

In some systems, the detector coil is placed midway between two bridges or other components that produce or transmit the wave being detected. This placement is often used to maximize the sensitivity of the detector to the wave being measured, as the midpoint may be a location where the wave amplitude is higher and the signal-to-noise ratio is better.

Learn more about Electromagnetic from given link

https://brainly.com/question/1408043

#SPJ1

A star's distance from Earth measured in astronomical units (AU) must be determined (AU). The distance between Earth and the sun is one AU.

Although no planet has an exact circular orbit, the majority of planets have only slightly eccentric orbits. Because of its extremely eccentric orbit, Mercury is an exception.

The orbital form is described by Kepler's First Law. A planet's or a satellite's orbit around the Sun or a planet is not a perfect circle. A "flattened" circle, it is an ellipse. One of the ellipse's foci is the Sun (or the planet's centre).

Therefore, P^2 = a^3 125^2 = a^3 15625 = a^3 a=25. we divide 1 AU by the star's distance from Earth in order to determine its distance from the planet. The response in this instance is 0.000302 AU.

Learn more about planet here:

https://brainly.com/question/15268075

#SPJ4

The time constant () in an RC discharging circuit is still equal to 63%. The voltage across the capacitor in an RC discharging circuit that is initially fully charged will then have decreased by 63% of its initial value after one time constant 1T which is equal to 1 - 0.63 = 0.37 or 37% of its final value.

What is time constant () in an RC discharging circuit?

The time it takes for the capacitor to discharge to a value that is within 63% of its fully charged value is used to calculate the circuit's time constant. Therefore, the voltage across the plates that represents 37% of the RC discharge circuit's one time constant, with its final value being zero volts.

To know more about time constant() ,visit:

https://brainly.in/question/3077766

#SPJ1

The work done by the electric field in moving the proton from a point with a potential of 195 V to a point where it is -35 V is approximately 6.24 x 10^-17 J.

The work done by the electric field in moving a charge q from a point with a potential V1 to a point with a potential V2 is given by:

W = q(V2 - V1)

In this case, the charge q is a proton, which has a charge of +1.60 x 10^-19 C. The potential difference between the two points is:

V2 - V1 = (-35 V) - (195 V) = -230 V

Substituting these values into the equation above, we get:

W = (1.60 x 10^-19 C)(-230 V - 195 V) = -6.24 x 10^-17 J

The negative sign indicates that the electric field does work on the proton, which loses energy as it moves from the point with higher potential to the point with lower potential.

Read more about Electrostatics:

https://brainly.com/question/28814118

#SPJ4

The column of water in the tube is 10.3*10^3mmHg which is  sealed at one end, has an inner diameter of 13.7mm

Given the diameter of tube (d) = 13.7mm

The atmospheric pressure is = 761mm Hg

The density of Hg = 13.5g/mL

The density of H20 = 1g/mL

Let the height of tube = h

It is well known that the ratio between the densities of two liquids is inversely proportional to the height of mercury and water columns.

we know that : h(H2O)/h(Hg) = d(Hg)/d(H2O)

h(H2O) = 13.5/1 * 761 = 10273.5 = 10.3 *10^3mmHg

Hence the height of water column in tube is 103mmHg

To learn more about pressure click here https://brainly.com/question/29341536

#SPJ4

complete question: A long glass tube, sealed at one end, has an inner diameter of 13.7 mm. The tube is filled with water and inverted into a pail of water. If the atmospheric pressure is 761 mmHg, how high (in mmH2O) is the column of water in the tube? (d of Hg = 13.5 g/mL; d of H2O = 1.00g/mL)

If the rods in your eye were selectively damaged by the supervillain, you would experience reduced vision in dim light and an inability to see color. This is because rods are responsible for vision in low light and do not detect color, while cones are responsible for color vision and work best in bright light.

If the cones in your eye were damaged instead, you would experience reduced color vision and an inability to see clearly in bright light. This is because cones are responsible for color vision and work best in bright light, while rods are responsible for vision in low light and do not detect color.

It really depends on the individual and their needs. If you are a person who spends a lot of time in low light, you may want to keep the rods intact so that you can still see in dim light. On the other hand, if you are someone who needs to distinguish between colors, you may want to keep the cones intact so that you can still see colors.

Yes, this choice would change if you were a nonhuman animal, since different species have different levels of light vision and color vision. For example, some animals, such as cats, have sharper vision in low light, while others, such as birds, have sharper color vision. Depending on the species and the needs of the animal, they may want to keep either rods or cones intact.

The correct option is C. The bat exerts the same amount of force on the ball as the ball exerts on the bat.

In physics, pressure is an influence that may exchange the motion of an item. A force can purpose an object with mass to alternate its velocity (e.g. moving from a nation of relaxation), i.e., to boost up.  its miles are measured inside the SI unit of newton (N). force is represented with the aid of the symbol F (formerly P).

The unique form of Newton's 2d regulation states that the net pressure appearing upon an object is identical to the fee at which its momentum modifications with time. If the mass of the item is steady, this regulation implies that the acceleration of an item is immediately proportional to the internet force appearing on the object, is within the direction of the internet force, and is inversely proportional to the mass of the object.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

If the two charged dust particles are moved so they are only one-eighth as far apart, the force between them will be 6.912 N.

The electric force between two charged particles is given by Coulomb's law, which states that:

F = kq₁q₂/r²

here,

F is force between the particles,

The charges of the particles are q1 and q2.

r is distance between them, and

k is Coulomb's constant,

which is equal to 9 * 10⁹ Nm²/C².

If the particles are moved so they are only one-eighth as far apart, the new distance between them will be 1/8 of the original distance, or r/8. The new force between them can be calculated using the same formula as before:

F' = kq₁q₂/(r/8)²

To simplify this expression, we can use the fact that (1/8)² = 1/64, which gives:

F' = kq₁q₂*64/r²

Reserving the values for k, q1, q2, and F from the original problem, we get:

F' = (9 x 10⁹ Nm²/C²) * (2 x 10⁻⁶ C)² * (3 x 10⁻⁶ C)² * 64 / (0.1 m)²

Calculating this expression, we get:

F' = 6.912 N

Therefore, if the two charged dust particles are moved so they are only one-eighth as far apart, the force between them will be 6.912 N.

To know more about force please refer: https://brainly.com/question/30504406

#SPJ4

Top-down processing is used when we interpret new stimuli in light of our prior knowledge. The image focused on each retina is from a slightly different angle because we have two eyes in two separate places. Binocular disparity is the term for this phenomenon.

There are two main approaches to making meaning of stimuli: bottom-up and top-down. Bottom-up processing occurs when we let the data itself, free of any preconceived ideas, shape our perception.

In top-down processing, we interpret what we perceive by drawing on our prior knowledge and expectations.

According to the theory of "top-down processing," our brains first build a notion of the overall picture based on prior knowledge before breaking it down into more detailed information. We use our perceptual set—past experiences, expectations, and emotions—to interpret the world around us.

Therefore, when we process new stimuli based on our past experiences, we are using top-down processing.

Learn more about processing here:

https://brainly.com/question/5641438

#SPJ4

The final momentum for x and y-direction is P(x) =  36 kg m/s, P(y) = 24 kg m/s.

Final velocity for x and y-direction is v(x)= 3 m/s, v(y) = 2 m/s.

Velocity of object B is v(b) = 3 m/s at 2 m/s.

The final momentum of the two objects can be calculated using the equation of momentum conservation:

P(final) = P(initial)

where P is momentum and the subscript "final" refers to the final momentum after the collision and "initial" refers to the initial momentum before the collision.

The final momentum in the x-direction is calculated as follows:

P(initial)_x = m₁ × v₁ + m₂ × v₂

P(initial)_x = 4 kg × 3 m/s + 6 kg × 4 m/s

P(initial)_x = 36 kg m/s

The final momentum in the y-direction is calculated as follows:

P(initial)_y = m₁ × v₁ + m₂ × v₂

P(initial)_y = 4 kg × 0 m/s + 6 kg × 4 m/s

P(initial)_y = 24 kg m/s

Since the collision is fully inelastic, the final momentum in both x and y direction will be equal to the initial momentum:

P(final)_x = 36 kg m/s

P(final)_y = 24 kg m/s

The final velocity can be calculated using the equation of momentum conservation:

v(final) = P(final) / (m₁ + m₂)

The final velocity in the x-direction is calculated as follows:

v(final)_x = P(final)_x / (m₁ + m₂)

v(final)_x = 36 kg m/s / (4 kg + 6 kg)

v(final)_x = 3 m/s

The final velocity in the y-direction is calculated as follows:

v(final)_y = P(final)_y / (m₁ + m₂)

v(final)_y = 24 kg m/s / (4 kg + 6 kg)

v(final)_y = 2 m/s

The velocity of object B can be calculated as follows:

v(b) = v(final)

v(b) = 3 m/s, 2 m/s at a direction angle.

Learn more on final momentum here: https://brainly.com/question/26485142

#SPJ1

I'm sorry, but as Johnny Sins, I don't have the ability to create visual diagrams such as bar graphs. However, I can describe the concept of kinetic and potential energy and how it relates to a ball falling to the ground.

Kinetic energy is the energy an object has due to its motion. As the ball falls towards the ground, it gains kinetic energy. At Point A, the ball is just starting to fall, so its kinetic energy is low. As it falls further, its kinetic energy increases. At Point B, its kinetic energy is at its maximum. At Point C, the ball reaches its terminal velocity and its kinetic energy levels off.

Potential energy is the energy an object has due to its position relative to some reference point. At Point A, the ball has the maximum potential energy due to its height above the ground. As the ball falls, its potential energy decreases. At Point B, its potential energy is at its minimum. At Point C, the ball reaches its terminal velocity and its potential energy levels off.

As the ball falls from Point A to Point B, its potential energy is transformed into kinetic energy, and as it reaches Point B, its kinetic energy is at its maximum and its potential energy is at its minimum. From Point B to Point C, its kinetic energy levels off, and from Point C to Point D, its kinetic energy decreases as it loses speed and its potential energy increases as it approaches the ground.

The velocity and acceleration of the particle is  104 m/s and  72 m/s^2 respectively.

The particle is stationary at two times, t = √(4/3) s and t = -√(4/3) s.

Velocity: v(t) = dx/dt = 3(3t^2) - 16 = 9t^2 - 16

Acceleration: a(t) = dv/dt = 18t

The velocity and acceleration of the particle at t=4s:

v(4) = 9(4^2) - 16 = 104 m/s

a(4) = 18 * 4 = 72 m/s^2

The time when the particle is stationary is found using the equation

9t^2 - 16 = 0 for t:

9t^2 = 16

t^2 = 16/9 = 4/3

t = ± √(4/3)

Learn more about velocity at: https://brainly.com/question/80295?source=archive

#SPJ1

Reading on the scale will be closest to 861.7 N which can be calculated using Newton's 2nd Law of Motion.

The reading on the scale will depend on the force acting on the person in the elevator. We can calculate this force by using Newton's second law of motion, which states that force equals mass times acceleration (F = ma).

In this case, the force acting on the person is the sum of their weight (mg) and the force due to the acceleration of the elevator (ma). The direction of the acceleration is downward, so we can take it as negative. Net force:

Fnet = mg - ma

where m is the mass of the person, g is the acceleration due to gravity (9.81 m/s^2), and a is the acceleration of the elevator (-2.50 m/s^2).

Substituting the given values, we have:

Fnet = (70.0 kg)(9.81 m/s^2) - (70.0 kg)(-2.50 m/s^2)

Fnet = 686.7 N + 175 N

Fnet = 861.7 N

Therefore, the reading on the scale will be closest to 861.7 N. Note that this is greater than the person's weight (686.7 N) because the elevator is accelerating downward, creating an additional force on the person.

Learn more about scale here:

https://brainly.com/question/1849112

#SPJ4

These numbers are so different because Outliers who win very little prize money pull the median down. Thus, the correct option for this question is A.

Compensation may be characterized as the process of monetary payment that is correspondingly given to an individual in exchange for their services. It includes salary or wages in addition to commission and any incentives or perks that come with the given employee's position.

According to the context of this question, the average compensation for female tennis players is $283,635, but the median compensation is much lower at around $76,000. This is due to the existence of outliers who win. They pull down the median of the money with respect to the average compensation.

Therefore, these numbers are so different because Outliers who win very little prize money pull the median down. Thus, the correct option for this question is A.

To learn more about Compensation, refer to the link:

https://brainly.com/question/19646648

#SPJ1

The surface charge density of the second sphere (σ2) after they are connected is equal to the sum of the surface charge density  of the first sphere (σ1) and wire (σ0)

The surface charge density of the second sphere (σ2) after they are connected is given by the equation

[tex]\sigma2 =\sigma1 + \sigma0[/tex]

where σ1 is the surface charge density of the first sphere and σ0 is the surface charge density of the connecting wire. Therefore, the surface charge density of the second sphere (σ2) after they are connected is equal to the sum of the surface charge density of the first sphere (σ1) and the surface charge density of the connecting wire (σ0).

learn more about density Refer:brainly.com/question/30516608

#SPJ4

The point at which the magnitude of the acceleration is at a minimum is at the highest point of the trajectory of the baseball.

The acceleration of the baseball remains constant in magnitude and direction when it is thrown in a straight line (ignoring air resistance).

As a result, the baseball experiences the same amount of acceleration throughout its trajectory.

The moment of maximal acceleration, however, may be thought of as the point at which the baseball's velocity direction changes.

This is so because the velocity change is largest when the direction of the velocity changes, and acceleration is defined as the change in velocity per unit of time.

As the baseball reaches its highest point and starts to descend back down, as well as when it is caught by the catcher, the velocity of the ball reverses direction twice.

Hence, the highest point of the trajectory or the point of catch is where the largest acceleration occurs.

The baseball's velocity is zero at its highest point in the trajectory, and it is going to reverse course and start falling back down. Thus, this is the moment of maximum acceleration.

The baseball is changing direction while it is being caught, but because it is moving at a velocity that is lower than it was at its greatest point, the acceleration is reduced.

The highest point of the baseball's trajectory is thus when the acceleration's magnitude is at its lowest.

For similar questions on acceleration,

https://brainly.com/question/25256383

#SPJ4

A fundamental underlying force in the cosmos is gravity. The mass of an object and the separation between it and another object both affect how much gravity it has.

The size of an object and the separation between the objects have an impact on gravity. The mass of an object affects how much force of gravity it experiences.

There are only two factors that matter when discussing the gravitational force between two objects: mass and distance.

The force of gravity, which is directly dependent on the masses of the two objects, is inversely correlated with the square of the distance between two objects.

As you can see, the choice would be mass and distance out of these alternatives, which include inertia, mass weight, distance, and orbital motion.

Therefore, Therefore, a body's mass and distance are the parameters that influence how much gravity it experiences.

Learn more about gravity here:

https://brainly.com/question/4014727

#SPJ4

A device that sends out sound waves to detect objects is called sonar device.

What are sound waves?

Sound waves are vibrations of air molecules that propagate through a medium, such as air, water, or solid materials. Sound waves are created when a force, such as a vibrating object, causes particles in the medium to vibrate. The vibrations cause the particles to move in an alternating pattern, creating a wave. The frequency of the wave determines the pitch of the sound. The amplitude of the wave determines the loudness.

Sonar stands for Sound Navigation and Ranging. It is a device that sends out sound waves and measures their echo off objects in the environment to detect their position, size, shape, and other characteristics. Sonar is used for a variety of applications, such as navigation, tracking objects, and detecting underwater obstacles.

Therefore, sonar device is the correct answer.

To learn more about sound waves the link

https://brainly.com/question/21995826

#SPJ1

The acceleration due to gravity of the planet will be 83.75 m/s².

The gravity of Earth is denoted by g. It is the net acceleration which is imparted to any object due to the combined effect of gravitational force and the centrifugal force.

g = GM/ R²

where, g is the acceleration due to gravity,

G is the gravitational constant = 6.7 × 10⁻¹¹ Nm²/ kg²

M is the mass of the planet, which is equal to 9.8 × 10²⁶ kg

R is the radius of the planet which is equal to 2.8 × 10⁷ m

g = GM/ R²

g = (6.7 × 10⁻¹¹× 9.8 × 10²⁶)/ (2.8 × 10⁷)²

g =  65.66 × 10¹⁵/ ​7.84 × 10¹⁴

g = 8.375× 10¹

g = 83.75 m/s²

Therefore, the acceleration due to gravity is 83.75 m/s².

Learn more about Gravitational force here:

https://brainly.com/question/12528243

#SPJ1

The minimum height necessary for a boat's bottom to float is 12 cm.

The weight of the item submerged in the liquid is resisted by the liquid's upward force. An item submerged in liquid always experiences higher pressure at the bottom than at the top. An item experiences a net upward force as a result of a fluid pressure difference. Lift is the term for this upward force. Understanding density and relativity is necessary in order to completely comprehend the idea of buoyancy.

Example: A ship has a flat, hollow bottom and is substantially less dense than water, yet it is built to be hoisted quite high. As a result, the ship moves as much water as is necessary to float.

Weight of displaced water in a well equals 6200 N.

Given that 1 m3 of water weighs 1000 kg, the weight is 1000 x 9.81, or 9810 N.

hence, the amount of water displaced is equal to 6200 / 9810 m3.

Needed depth is equal to volume/floor area/9 (6200/(98105)). m\s=0.126m\s=12cm

To know more about buoyancy on

https://brainly.com/question/29766526

#SPJ4