approximately how much of the anthropogenic carbon dioxide in the atmosphere has dissolved into the ocean?

It would require 46434 calories of heat to boil 142 g of ammonia.

When a liquid changes form into a gas, the process is called vaporization. You can watch vaporization when you boil a pot of water. Vaporization happens in two ways: evaporation and boiling. Evaporation occurs when sunlight shines on water until it changes to vapor and rises into the air

To calculate the amount of heat required to boil 142 g of ammonia, NH3, we can use the formula:

Heat = mass x heat of vaporization

where the mass is 142 g and the heat of vaporization is 327 cal/g.

Therefore, the heat required to boil 142 g of ammonia is:

Heat = 142 g x 327 cal/g

Heat = 46434 cal

For such more questions on Vaporization

https://brainly.com/question/26306578

#SPJ4

The distribution of electrons within a bond is influenced by the two atoms' different electronegativities, which in turn impacts the bond's polarity.

An atom's propensity to draw electrons into a chemical bond is known as its electronegativity, a feature that is measured. On the Pauling scale, it has a value between 0 and 4, with values rising as the ability of an atom to attract electrons does. The polarity of the bond and, thus, the nature of the interaction between the atoms, are determined by the disparity in electronegativity between the two bound atoms. In a bond between two atoms with comparable electronegativities, the electrons are distributed equally among the atoms, making the bond nonpolar. The electrons are not shared equally and there are positive and negative ends to a polar connection formed between two atoms when their electronegativities are significantly different.

Learn more about electronegativities here:

https://brainly.com/question/405366

#SPJ4

The diagram would look similar, but instead of the salt molecules, there would be water molecules. The water molecules would form hydrogen bonds, which would give the structure of the diagram a different shape.

A water molecule is a molecule composed of two hydrogen atoms and one oxygen atom, connected by covalent bonds. Water is essential to all known forms of life and is the most abundant liquid on Earth. It is also the most abundant molecule in the human body, making up 55-60% of our total body weight. Water molecules are polar, with the oxygen atom having a slightly negative charge and the hydrogen atoms having a slightly positive charge. This polarity enables water molecules to form hydrogen bonds with each other, creating a strong network of hydrogen bonds within the liquid. This network of hydrogen bonds is what gives water many of its unique properties, such as its high surface tension, high boiling point, and high heat capacity.

To learn more about  water molecules

https://brainly.com/question/30610591

#SPJ1

He is now 58.86 K instead of 177.19 K in temperature.  77.68 L was its initial capacity in liters if its new volume is 29. 481 L

The relationship between temperature, pressure, and volume for an ideal gas can be described by the Ideal Gas Law: PV = nRT, where P is pressure, V is volume, T is the temperature, R is the ideal gas constant, and is the number of moles of gas.

Since n and P are constant in this case, we can rearrange the equation to solve for the original volume:

V1/T1 = V2/T2

V1 = V2 * T1/T2

V1 = 29.481 L * (177.19 K / 58.86 K)

V1 = 77.68 L

So the original volume of He was 77.68 L at 177.19 K.

Learn more about  Ideal Gas Law here:

https://brainly.com/question/28257995

#SPJ4

The chemical equations illustrate the law of conservation of mass, because each chemical equation must be balanced so that the number of atoms of each element on the reactant side equals the number of atoms of each element on the product side.

The law of conservation of mass, also known as the principle of mass conservation, states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time because the mass of the system cannot change.

When you change the coefficients, you are only changing the number of molecules in that substance. However, changing the subscripts changes the substance itself, rendering your chemical equation incorrect.

Thus, The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction.

To learn more about the law of conservation of mass, follow the link;

https://brainly.com/question/28711001

#SPJ9

an electrocyclic reaction is an intramolecular reaction in which a new σ bond is formed between the ends of a conjugated π system. the concerted electron shifts result in a highly stereoselective product. the configuration of the product depends on thermal reaction.

An electrocyclic reaction is indeed an intramolecular reaction in which a new σ bond is formed between the ends of a conjugated π system. This reaction is concerted, meaning that it occurs in a single step without any intermediate species.

The stereochemistry of the product formed depends on whether it is a thermal reaction or a photochemical reaction. In thermal electrocyclic reactions, the product has the same stereochemistry as the starting material. In contrast, in photochemical electrocyclic reactions, the product has the opposite stereochemistry to the starting material. This is known as the Woodward-Hoffmann rule, which states that the stereochemistry of the product is controlled by the symmetry of the transition state involved in the reaction.

It's also worth noting that electrocyclic reactions are highly stereoselective, meaning that they generally lead to a single stereoisomer of the product. This is due to the concerted nature of the reaction and the requirement for symmetry in the transition state.

To learn more about stereochemistry:

https://brainly.com/question/28658912

#SPJ4

The energy of the X-ray, given that it has a wavelength of 3.80×10⁻⁶ cm is 5.23×10⁻¹⁸ J (Last option)

We'll begin by obtaining the frequency of the X-ray. Details below:

Velocity (v) = wavelength (λ) × frequency (f)

3×10⁸ = 3.80×10⁻⁸ × frequency

Divide both sides by 3.80×10⁻⁸

Frequency = 3×10⁸ / 3.80×10⁻⁸

Frequency = 7.89×10¹⁵ Hertz

Finally, we shall determine the energy of the X-ray. Details below:

Energy (E) = Planck's constant (h) × frequency (f)

E = hf

E = 6.626×10⁻³⁴ × 7.89×10¹⁵

E = 5.23×10⁻¹⁸ J

Thus, the energy is 5.23×10⁻¹⁸ J (Last option)

Learn more about energy:

https://brainly.com/question/8623863

#SPJ1

The correct order of increasing radius for this isoelectronic series is: Cl- < K+ < Ca2+ < Ar.The correct order of increasing radius for the isoelectronic series depends on the effective nuclear charge experienced by the electrons in each ion.

The effective nuclear charge is the net charge experienced by an electron in an atom or ion, taking into account the shielding effect of other electrons in the atom or ion.

In this case, the isoelectronic series includes Ca2+, Ar, K+, and Cl-. Since all ions have the same number of electrons, the ion with the highest effective nuclear charge will have the smallest radius, while the ion with the lowest effective nuclear charge will have the largest radius.

Therefore, the correct order of increasing radius for this isoelectronic series is: Cl- < K+ < Ca2+ < Ar.

This is because Cl- has the lowest effective nuclear charge, due to its high electron density and high level of electron shielding, and therefore has the largest radius. Conversely, Ar has the highest effective nuclear charge, due to its low electron density and lack of electron shielding, and therefore has the smallest radius.

Therefore, the correct answer is "cl- < k < ca2+ < ar" as this order reflects the trend of increasing radius as the effective nuclear charge decreases.

Find out more about isoelectronic series

brainly.com/question/29388848

#SPJ4

Between 0 and 1500, the average reaction rate is 0.000112 M/s, or 7.14*[tex]10^{-5}[/tex]Instantaneous rate is thus 7.25*[tex]10^{-5}[/tex] M/s..

Resistance or antagonism to a force, action, or movement is a reactionary act, process, or occurrence. especially: a reaction to a particular treatment, circumstance, or stimulus; leaning toward a past and typically antiquated political or social system or policy. She was shocked by the information.

The paper ought to include a synopsis of the source material, but the major emphasis should be on your opinions and justifications regarding the topics included in the actual text. This necessitates your consideration of the provided work, followed by a targeted, well-thought-out response supported by outside sources, when appropriate.

Part A:

At t = 0 s , [A] = 0.184 M

At t = 1500 s , [A] = 0.016 M

Average rate = \Delta[A] / \Deltat

= (0.016 - 0.184) / (1500 - 0)

= - 0.168 / 1500

= - 0.000112 M/s

Hence average rate = 1.12*[tex]10^{-4}[/tex] M/s

Part B:

At t = 500 s , [A] = 0.069 M

At t = 1200 s , [A] = 0.019 M

Average rate = (0.019 - 0.069) / (1200 - 500)

= - 0.05 / 700

= - 7.14*[tex]10^{-5}[/tex] M/s

Hence average rate = 7.14*[tex]10^{-5}[/tex] M/s

Part C:

0.20 0.18 0.16 0.14 0.12 Z 0.10 0.08 0.06 0.04 0.02 0 200 400 600 800 1000 1200 1400 1600 Time (s)

Now, we have:

At t = 600s ; [A] = 0.043 M

At t = 1000s ; [A] = 0.014 M

Instantaneous rate = slope of tangent at t = 800s

= d[A] / dt

= (0.014 - 0.043) / (1000 - 600)

= - 0.029 / 400

= - 0.0000725 M/s

Hence instantaneous rate =  7.25*[tex]10^{-5}[/tex] M/s

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ1

B) There are strong repulsive forces between the gas molecules. Strong repelling forces exist between the gas molecules, which do not exist in an ideal gas.

The statement in option (B), "There are significant repulsive interactions between the gas molecules," DOES NOT apply to a perfect gas. There are no substantial intermolecular forces, either attracting or repulsive, between the gas molecules in a ideal gas. Because of this, gas molecules may travel unimpeded and independently of one another, clash with one another and with container walls, and do so only through elastic collisions. Other possibilities include having a minimal molecular volume (C), adhering to the ideal gas equation (D), and having an inverse connection between average kinetic energy and absolute temperature (E).

learn more about ideal gas here:

https://brainly.com/question/28257995

#SPJ4

Answer:

Non-Electrolyte

Explanation:

Glucose is a covalent compound that is formed by the sharing of electrons between the constituent atoms of glucose.

Answer:

283.1g CaCl2

Explanation:

Use Molar Mass of CaCl2 and convert.

2.55molsCaCl2 x 111g/1mol = 283.1g CaCl2

A scientific lens in AP Seminar is a perspective or viewpoint that focuses on using the scientific method and empirical evidence to analyze and understand a given topic or issue.

A scientific lens emphasizes the importance of objective observation, experimentation, and data analysis in forming conclusions and making decisions.In AP Seminar, students are encouraged to use a variety of lenses or perspectives to examine and analyze complex issues. The scientific lens is one of these perspectives, and it is often used to examine topics related to science, technology, and medicine. However, the scientific lens can also be applied to other fields and disciplines, such as economics, psychology, and sociology.

By using the scientific lens, students can gain a deeper understanding of the underlying causes and effects of a given issue, and can develop more informed and evidence-based opinions and solutions. This lens is particularly useful for examining complex and multifaceted issues, as it allows students to break down the issue into smaller, more manageable components, and to analyze each component using the scientific method.

Learn more about scientific method at:

https://brainly.com/question/28946726

#SPJ11

John Dalton was the first scientist to propose an atomic theory.  He discovered that chemical always have whole number ratios for atoms. So correct answer is option C.

In 1800s Dalton suggested that all the chemical components are in whole number ratios of atoms. In a molecule we cannot have a fraction of an atom, but a whole atom undergoes changes in chemical reactions.

Dalton's book "A New System of Chemical Philosophy" was the book introducing application of atomic theory for the first time. In the book he depicted how elements combine to form compounds and explain phenomena that supports atomic theory.

By proposing law of multiple proportions Dalton stated that two or more elements combine to form compounds with different weights, but the weight of element in each compound will be in simple integer ratios. This supports the presence of a smallest indivisible unit called atom.

So, the scientist offered the proof that atoms existed is John Dalton.

For more information regarding Dalton's atomic theory, kindly refer

https://brainly.com/question/25176189

#SPJ4

For each of the gas-phase reactions given, the rate expressions are based on the appearance of each product or disappearance of each reactant.

For the reaction 2H2O(g)→2H2(g)+O2(g), the rate expressions are:

1.rate = -Δ[H2]/Δt

2.rate = -Δ[H2O]/Δt

3.rate = Δ[O2]/Δt

In this equation, the negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the rate of the reaction.

For the reaction 2SO2(g)+O2(g)→2SO3(g), the rate expressions are:

1.rate =  Î”[SO3]/Δt

2.rate = -Δ[SO2]/Δt

3.rate = -Δ[O2]/Δt

The negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the rate of the reaction.

For the reaction 2NO(g)+2H2(g)→N2(g)+2H2O(g), the rate expressions are: 1.rate =  Î”[N2]/Δt 2.rate =  Î”[H2O]/Δt 3.rate = -Δ[H2]/Δt rate = -Δ[NO]/Δt

The negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the

1.rate = -2 Δ[H2]/Δt

2.rate = 1 Δ[N2H4]/Δt

3.rate = -1 Δ[N2]/Δt

To know more about gas-phase reactions  click here:

brainly.com/question/29767119

#SPJ4

Answer: 0.83 mole

Explanation:

H2O has a gram-formula mass of 18 (hydrogen is 1 each, oxygen is 16).

If you have 15 grams, you have less than one mole.

15/18=0.83.

(っ◔◡◔)っ ♥

Hope this helps.

MM4343

Answer:

0.83 moles

Explanation:

The number of moles in 15 grams of water (H2O) can be calculated as follows:

First, we need to determine the molecular weight of H2O. It is composed of 2 hydrogen atoms (H) and 1 oxygen atom (O). The molecular weight of H2O can be calculated as follows:

(atomic weight of H x 2) + (atomic weight of O) = 2 x (1.01 g/mol) + 16.00 g/mol = 18.02 g/mol

Next, we can use the formula:

number of moles = mass / molecular weight

where mass is given as 15 grams.

number of moles = 15 g / 18.02 g/mol = 0.83 moles

Allen

Milk, corn syrup, and pineapple juice all react with Benedict's reagent to produce a color change, indicating the presence of reducing sugars.

This is because Benedict's reagent contains copper ions that are reduced by the aldehyde or ketone groups of the reducing sugars, forming a brick-red precipitate of copper(I) oxide.

Milk and corn syrup contains lactose and glucose/fructose, respectively, while pineapple juice contains primarily sucrose. All of these sugars have reducing properties that react with the copper ions in Benedict's reagent. The intensity of the color change can be used to estimate the concentration of reducing sugars in a sample.

Learn more about Benedict's reagent

brainly.com/question/5588314

#SPJ4

It is true that the rate of evaporation is equal to the rate of condensation in a dynamic equilibrium between the liquid state and the gas state.

Since the rate of evaporation is not zero, the vapour pressure increases until the evaporation and condensation rates are equal. The partial pressure of vapour in the container equals the equilibrium vapour pressure of the liquid at this time, indicating that the system is in dynamic equilibrium.

At the liquid water-air interface, the opposing processes of evaporation and condensation take place concurrently. The number of water molecules that transform from liquid to gas each second is the rate of evaporation. The temperature of the liquid water has a major role in determining the rate of evaporation. The rate of evaporation increases with the temperature of the liquid water.

Learn more about Condensation here:

https://brainly.com/question/1447093

#SPJ4

The number of buckets we need to separate these chemicals is 3.

Intermolecular force of the attraction is defined as the attraction by which two atoms or two molecules combine to form a molecule or matter. This force is basically attractive in nature. Intermolecular forces are the forces of attraction or repulsion which acts between neighboring particles. It acts between atom and ions also. The intermolecular force usually varies for solid, liquid and gaseous matter.

Here, C₂H₆ have London dispersion forces

CH₃F have Dipole-Dipole forces

CH₄ have London dispersion forces

NH₃ have hydrogen bonding

Hence, in order to separate these chemicals we need 3 buckets (different kinds of imf).

Learn more about IMF from the link given below.

https://brainly.com/question/30388589

#SPJ4

The metal has a specific heat of 0.390 J/g°C.

What is Specific Heat ?

Specific heat is an important concept in thermodynamics and is used to determine the amount of heat required to raise the temperature of a material, or conversely, the amount of heat that is released when a material cools. Different materials have different specific heats, which means that they require different amounts of heat to change their temperature. For example, water has a very high specific heat, which means that it takes a lot of heat energy to raise its temperature, while metals have much lower specific heats and require much less heat energy to change their temperature.

We can use the formula for the heat absorbed or released by a material:

Q = m * c * ΔT

where Q is the heat absorbed or released, m is the mass of the material, c is the specific heat, and ΔT is the change in temperature.

In this case, the metal absorbs 57.2 J of heat, and the temperature of the sample rises 32°C. The mass of the metal is 4.70 g. When these values are added to the formula, we obtain:

57.2 J = 4.70 g * c * 32°C

Solving for c, we get:

c = 57.2 J / (4.70 g * 32°C)

= 0.390 J/g°C

Therefore, the specific heat of the metal is 0.390 J/g°C.

Learn more about Specific Heat from given link

https://brainly.com/question/27991746

#SPJ1

Answer:

The molecular weight of glucose (C6H12O6) is 6(12.01) + 12(1.01) + 6(16.00) = 180.18 g/mol.

So, the number of moles of glucose present in 240.0 g can be calculated as follows:

n = m/M = 240.0 g / 180.18 g/mol = 1.33 mol

And the number of molecules of glucose can be calculated as follows:

N = n x Avogadro's constant = 1.33 mol x 6.022 x 10^23 molecules/mol = 7.98 x 10^23 molecules

Therefore, the number of molecules of glucose present in 240.0 g is 7.98 x 10^23 molecules, rounded to the nearest whole number.

So, the coefficient is 7.98 and the exponent is 23.

Explanation:

The net change in molecular weight would depend on the specific enzymatically catalyzed reaction and the substrates and products involved.

Enzymatic catalysis involves the conversion of a substrate into one or more products. The net change in molecular weight during the reaction can vary depending on the specific reaction and the molecules involved. If the combined mass of the substrate and cofactor is determined before the reaction and compared to the combined mass of the product and cofactor after the reaction, the net change in molecular weight can be positive, negative, or zero. This is because the reaction may involve the addition or removal of atoms, groups of atoms, or functional groups. In some cases, the product may be larger than the substrate, resulting in a positive net change in molecular weight. In other cases, the product may be smaller than the substrate, resulting in a negative net change. Finally, some reactions may result in no net change in molecular weight, indicating that the reaction involved only the rearrangement of atoms without any addition or removal. Overall, the net change in molecular weight during enzymatic catalysis is dependent on the specific reaction and the molecules involved.

To know more about molecular weight, visit:https://brainly.com/question/13346180

#SPJ4

Histidine is an important amino acid with an aromatic side chain that contains two nitrogens. The nitrogen in position 1 is more likely to get protonated in acid.

Under acidic circumstances, histidine's imidazole side chain can behave as a weak base and take up a proton (H+). The pKa values of the two nitrogens in the imidazole ring differ, determining which nitrogen is more likely to be protonated.

The nitrogen that is more likely to be protonated in acid is the more basic nitrogen, which is the nitrogen that is less able to share its electron pair due to its ring location. In the case of histidine, the nitrogen situated at position 1 of the imidazole ring is more basic and hence more likely to be protonated in acid.

This is because nitrogen in position 1 has a lower pKa value (about 6) than nitrogen in position 3. (around 9). This indicates that the nitrogen in position 1 is more likely to take up a proton and get protonated in acidic circumstances, whereas the nitrogen in position 3 is less likely to do so.

For more such questions on acid, click on:

https://brainly.com/question/25148363

#SPJ4

The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.

E) None of the above

Relation between transmittance and absorbance is as follows.

Therefore we know that the amount of light that passes through a solution is known as transmittance.

It can be expressed as follows;

T= [tex]\frac{I_{t} }{I_{0} }[/tex]

Now we know that, I, is the intensity of transmitted light.

I is the initial intensity of light beam.

Then the colorimeter produces an output voltage which is linearly varies with transmittance that is light intensity.

Relation between absorbance and transmittance is as follows:

A = log ([tex]\frac{I}{T}[/tex])

The reciprocal of transmittance of the sample varies logarithmically varies with absorption.

Therefore, we can say that the voltage produced by the colorimeter is varies logarithmically reciprocal to the absorbance of the sample and linear to the light intensity.

To learn more about light intensity, click here:

brainly.com/question/9195922

#SPJ4

The flow rate is roughly 34 gtt/min per hour. A number of bacterial illnesses can be treated with the antibiotic clindamycin. It is a member of the group of medications known as lincosamide antibiotics.

We can use the following calculation to determine the hourly flow rate in gtt/min: The volume in gtt divided by the number of minutes makes up the hourly flow rate (gtt/min). Let's begin by determining the total volume in gtt: 900 mg = 0.9 g . 75 ml of D5W and 1 g of clindamycin equal 1 x 15 gtt. 0.9 g of clindamycin in 67.5 ml of D5W, or (75/1) times 0.9. 1012.5 gtt is equal to 67.5 ml of D5W multiplied by 15. The infusion will take 30 minutes, we also know that. The formula reads: hourly flow rate (gtt/min) = 1012.5 gtt / 30 min = 33.8 gtt/min after filling in the variables. The hourly flow rate, rounded to the nearest whole amount, is roughly 34 gtt/min.

Learn more about clindamycin here:

https://brainly.com/question/8376709

#SPJ4

The volume of air that can be exhaled after normal exhalation is called the residual volume.

The residual volume is the amount of air that remains in the lungs after a person has exhaled as much air as they can. This volume is estimated to be about 1.0 to 1.5 liters in healthy individuals. It is important for maintaining adequate lung function and preventing lung collapse. The residual volume serves as a "reserve" of air that can be used for activities such as exercise, speaking, and deep breathing. The lungs are made up of several different parts, including the alveoli, bronchioles, and airways. During normal breathing, air flows in and out of the lungs through the airways and into the alveoli, where oxygen is exchanged with carbon dioxide. However, after a person has exhaled as much air as they can, there is still some air remaining in the lungs. This remaining air is referred to as the residual volume. The residual volume is estimated to be about 1.0 to 1.5 liters in healthy individuals.The residual volume serves several important functions. Firstly, it helps to maintain the shape and structure of the lungs. Without a residual volume, the lungs would collapse, which could lead to airway blockages and reduced lung function.

To learn more about exhalation refer to this link

https://brainly.com/question/13155792

#SPJ4

Free radicals are formed as a result of the process of d)oxidation. So,correct option is d.

Free radicals are unstable particles or atoms that are made by the body normally or by openness to toxins. They can harm DNA and cells by taking electrons from different particles, which might cause infections or indications of aging. The body's capacity to battle free revolutionaries diminishes with age, prompting more oxidative pressure and degeneration.

The answer would be d. (Oxidation), on the grounds that the metabolic pathway in which cells use proteins to oxidize supplements, subsequently delivering energy which is utilized to change ATP. In many eukaryotes, this happens inside mitochondria.

Practically all high-impact organic entities complete oxidative phosphorylation. This pathway is most likely so inescapable in light of the fact that it is a profoundly proficient approach to delivering energy, contrasted with elective maturation cycles like anaerobic glycolysis.

Hence,correct option is d.

To know more about free radicals,visit here:

https://brainly.com/question/29422803

#SPJ4

(Complete question) is:

Free radicals are formed as a result of the process of

a. glycolosis.

b. hydrolosis.

c. photosynthesis.

d. oxidation.