7) A plane that can fly at 250 km/h wishes to reach an airport that has a bearing of 25° W of N from its present
location. If there is a 50.0 km/h wind blowing directly to the west what should be the heading of the plane.
What will be its ground speed? How long would it take to get to the airport if it were 560 km away?

The electric force between these electrons is 2.40 x 1043 times bigger than the gravitational force

However gravitational force moves on mass while the electric force acts on charge. Gravitational forces are only captivating while electric fields can be attractive/repulsive. The electric field is much stronger than the gravitational field.

Electrostatic forces are much stronger than gravitational forces. This is because gravity depends on mass, atoms have tiny masses so the gravitational forces joining them are close to zero. Whereas, the electrostatic force connected to charges is bigger.

So we can conclude that The gravitational force is extremely weak compared to the electric force.

Learn more about gravitational force here:https://brainly.com/question/24783651

#SPJ1

The reason that the gravitational force is more noticeable in our everyday interactions and at planetary or larger scales is because it is an attractive force that acts between all masses, and its strength decreases much more slowly with distance than the electric force.

The electric force and the gravitational force are indeed very different in their strength. The electric force between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them, whereas the gravitational force between two masses is proportional to the product of their masses and inversely proportional to the square of the distance between them. This means that for a given distance, the electric force between two charges can be many orders of magnitude stronger than the gravitational force between two masses.

However, the reason that we notice the gravitational force more in our everyday interactions and at planetary or larger scales is because it is an attractive force that acts between all masses, not just between two charged objects. This means that the gravitational force is felt by everything with mass, and it is always attractive, which means that it pulls objects toward each other. On the other hand, electric forces can be both attractive and repulsive, depending on the sign of the charges, and they are only felt by charged objects.

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

The surface area each tire have in contact with the ground is 0.11 m².

The weight of the car is evenly distributed on each wheel, so each wheel supports a force of 1000 kg / 4 = 250 kg.

The force on the tire is transmitted to the ground through the tire's contact patch, which is the surface area of the tire in contact with the ground.

The tire's contact patch can be calculated by dividing the total force on the tire by the pressure of the tire:

Contact patch area = Force on tire / Pressure

= 250 kg  x 9.8 N/kg / (2.2 bar  x 10⁵ Pa/bar)

= 0.11 m²

Learn more about surface area here: https://brainly.com/question/76387

#SPJ1

The distance Cathy's school is from her house can be calculated by multiplying the rate (1.0 m/s) by the time (2.0 h) that it takes her to walk there.

What is school?

School is an institution for teaching and learning. It is the place where students come to acquire knowledge, skills and values. It is a place where students learn to interact with peers, and to think critically and independently. School is a place where students form bonds with teachers and develop relationships with their peers. School helps students become well-rounded individuals, with a broad understanding of the world and good qualifications to pursue a chosen career. School also provides students with opportunities to explore their interests and passions, and to develop their talents.

Distance = Rate x Time

Distance = 1.0 m/s x 2.0 h

Distance = 2.0 m

Therefore, Cathy's school is 2.0 m from her house.

To learn more about school
https://brainly.com/question/26117248

#SPJ1

To determine: A cube's density and its ability to float on water. Explanation: Side: 5 cm. Volume is equal to (side)3 = 53 = 125 cm3. Cube weight is 250 g. Cube density = mass / volume = -250

What in physics is volume?

Describe volume. Describe volume. Each thing in three dimensions takes up some space. The volume of this area is what is being measured. The space filled within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

What distinguishes the terms volume and capacity?

Volume is sometimes referred to as capacity. For instance, a cylindrical jar's volume can be used to calculate how much water it can hold. Check the cylinder's volume here. The area that any three-dimensional solid occupies is known as its volume. These solids can take the form of a cube, cuboid, cone, cylinder, or sphere.

To know more about volume visit:

https://brainly.com/question/30283422

#SPJ1

Answer:

As you increase the magnification of an image, the depth of field decreases. This means that a greater portion of the image will be out of focus. A shallow depth of field is often used to isolate the subject from the background, while a deeper depth of field is used to keep more of the image in focus.

As you increase magnification, happens to the depth of field is decreases.

Magnification is the enlargement of the image on the radiograph compared to the size of the actual object. When zoomed in to the depth of field, the area that appears to be in focus becomes smaller and the background and foreground become more blurred. This is because as magnification increases, the focal length of the lens decreases, leading to a smaller depth of field. In order to maintain a larger depth of field while increasing magnification, you would need to increase the aperture of the lens.

In summary, as magnification increases, depth of field decreases. This is due to the relationship between magnification, focal length, and aperture. By increasing the aperture, you can maintain a larger depth of field while increasing magnification.

Learn more about magnification at:

https://brainly.com/question/27872394

#SPJ11

The average speed over the entire 8-second time interval is calculated by taking the total distance moved (30 cm + 40 cm = 70 cm) and dividing it by the total time (8 seconds). Average speed = (30 + 40) cm/s / 2 = 35 cm/s

Average speed is the average rate of change of an object's position over time. It is a measure of the distance traveled divided by the time taken to travel that distance. It is measured in units such as miles per hour, kilometers per hour, meters per second, and so on. Average speed is calculated by dividing the total distance traveled by the total time taken. It can be a useful metric for measuring the efficiency of movement, as it takes into account the entire distance and not just the maximum speed.

To learn more about Average speed

https://brainly.com/question/6504879

#SPJ1

The minimal speed necessary for an object to maintain a circular orbit around the Earth is known as the circular orbital velocity. Hence, it just circles the planet while staying at the same height above it.

The "circular orbital velocity" is the smallest speed needed to launch an object so that it stays at the same height above the ground and simply orbits the Earth. This velocity is the speed at which an object needs to move in order to stay in a circular orbit around the Earth, such that the gravitational force of the Earth is balanced by the centripetal force required to keep the object in its circular path.

To understand this concept, consider a satellite in orbit around the Earth. The gravitational force between the satellite and the Earth pulls the satellite towards the Earth's surface. However, the satellite is also moving forward with a certain velocity, which generates a centripetal force that pulls it away from the Earth. The balance between these two forces results in a circular orbit. The speed required for this balance to occur is dependent on the altitude of the orbit. The further the object is from the Earth's surface, the lower the required speed. However, if the object is too close to the Earth's surface, the required speed becomes very high, and the object will experience atmospheric drag that could cause it to slow down and fall back to Earth. The exact circular orbital velocity at any given altitude can be calculated using the following formula:

[tex]v = \sqrt{(GM/r)}[/tex]

In summary, the circular orbital velocity is the minimum speed required for an object to stay in a circular orbit around the Earth, where the gravitational force of the Earth is balanced by the centripetal force required to keep the object in its circular path.

To know more about speed please refer: https://brainly.com/question/30265720

#SPJ4

They left the Carolina's to join the Iroquois Confederacy this statement about the Native Americans in Carolina is true

In North Carolina, particularly in the eastern region of the colony, a smallpox outbreak decimates the Indian population. Cherokee populations are down by 50% as a result of the outbreak. Indians from the Waxhaw tribe, ravaged by smallpox, leave their homes in modern-day Union County and join the Catawba.

Due to their frequent geographical movements in pursuit of food and other resources, the earliest residents of North Carolina were nomads. Like their forefathers, archaic humans lived nomadic lifestyles.

Learn more about Native Americans here:

https://brainly.com/question/24715290

#SPJ1

The lithosphere, which is the mechanical layer's outermost layer and which exhibits stiff, brittle behaviour, The asthenosphere is a solid portion of the upper mantle that is so heated that it can flow and act plastically. The asthenosphere supports the lithosphere.

The crust and the brittle upper mantle make up the lithosphere, the Earth's outermost layer. The Greek terms "lithos," which means stone, and "sphaira," which means globe or ball, are the source of the English word "lithosphere."The crust and uppermost mantle are both parts of the lithosphere, which is the planet's hard, rigid outer layer. The weaker, hotter, and deeper portion of the upper mantle, known as the asthenosphere, lies beneath the lithosphere. A variation in how each lithosphere and asthenosphere responds to stress defines their boundary. The asthenosphere deforms viscously and accommodates strain by plastic deformation, whereas the lithosphere remains hard for very long geologic time periods during which it deforms elastically and through brittle failure.

Thus, it is believed that the lithosphere's thickness corresponds to the distance from the isotherm that marks the change from brittle to viscous behaviour.

To know more about lithosphere visit:

https://brainly.com/question/14631600

#SPJ1

Because it would attempt to draw in all the sides at once, it would probably spiral out of control.

Electrostatics is the study of electric charges in a stationary state (static electricity). Certain materials, like amber, have been known to collect light particles after rubbing since antiquity. The Greek word for amber, v, was used to create the English word "electricity". Electrostatic phenomena are caused by the interactions between electric charges. Such forces are described by Coulomb's law.

Although certain a electrostatic forces are relatively powerful, electrostatically generated forces often appear to small. The gravitational force between two objects is about 36 orders of magnitude weaker than the force between an electron and a to proton, which make up a hydrogen atom.

To know more about charged strips on

https://brainly.com/question/30453102

#SPJ4

Answer:1.5m/s^2

Explanation:6/5=1.5m/s^2

The amount of charge built up on your fingertip is approximately 10.08 x 10^-5 C.

The spark length of 2 cm is equal to the breakdown field strength in air, so the electric field strength between your fingertip and the doorknob is 3 x 10^6 N/C.

The electric potential difference between the two points is given by the equation:

V = Ed

Where V is the potential difference, E is the electric field strength, and d is the distance between the two points.

In this case, d is equal to 2 cm, so we can calculate the potential difference:

V = (3 x 10^6 N/C) x (2 cm) = 6 x 10^6 N m/C = 6 x 10^6 V

Next, we can calculate the charge q on your fingertip using the formula:

q = CV

Where C is the capacitance of your fingertip.

The capacitance of a sphere is given by the formula:

C = 4πε_0r

Where C is the capacitance, ε_0 is the permittivity of free space, and r is the radius of the sphere.

The diameter of your fingertip is 1.59 cm, so the radius is 0.795 cm. Plugging these values into the formula for capacitance, we get:

C = 4πε_0 * 0.795 cm = 4π * 8.85 x 10^-12 * 0.795 cm = 1.68 x 10^-11 F

Finally, we can calculate the charge on your fingertip by plugging in the values for q and C into the equation:

q = C x V = 1.68 x 10^-11 F x 6 x 10^6 V = 10.08 x 10^-5 C

So the amount of charge built up on your fingertip is approximately 10.08 x 10^-5 C.

learn more about capacitance: https://brainly.com/question/27393410

#SPJ1

Different substances have different reflectivities, or abilities to reflect light.

Reflectivity, also known as reflectance, is a measure of how much light is reflected by a substance compared to how much is absorbed or transmitted. It is a property of a material that depends on its chemical composition, physical structure, and surface properties. For example, a shiny metal surface such as a polished aluminum surface has a high reflectivity, meaning it reflects a large portion of the incident light. This is because metals have a smooth surface and free electrons that can move freely in response to the electromagnetic waves of the incident light, which results in a high reflectivity. On the other hand, a rough or matte surface such as paper has a low reflectivity, meaning it absorbs or scatters most of the incident light. This is because the rough surface causes light to reflect in different directions, and the material has a more complex internal structure that allows for absorption of the incident light. Different substances can also have different colors due to their reflectivity. For example, a red apple appears red because it absorbs most colors of light except for red, which it reflects. Similarly, a blue object appears blue because it reflects mostly blue light and absorbs other colors.

In summary, reflectivity is a property of a material that determines how much light is reflected compared to how much is absorbed or transmitted. Different substances have different reflectivities due to differences in their chemical composition, physical structure, and surface properties.

To know more about light please refer: https://brainly.com/question/28593056

#SPJ4

Unlocked position. The cam is used to lock the conductor in place, so the locking ring needs to be in the unlocked position in order for the conductor to be passed through the grip head.

A conductor is a person or object that allows the flow of electric current or heat. In electrical systems, a conductor provides a path for the electric current to flow from the power source to the device being powered. In heating systems, a conductor carries the heat from the source to the device or area that needs to be heated. Conductors are typically made of metal, such as copper, aluminum, and silver, as these materials have a higher electrical conductivity than most other materials.

To learn more about conductor

https://brainly.com/question/492289

#SPJ1

When a capacitor has charge q, it recovers energy u₁, and when it holds charge 16q, it stores energy u₂. u₂/u₁ has a value of 256.

Energy (E) stored in capacitor:-

[tex]U = (1/2) * C * V^2[/tex]

here U is energy,

C is capacitance, and

V is voltage across the capacitor.

Since the same capacitor is used in both cases, we can assume that the capacitance C is constant. Therefore, the ratio of energy stored is given by the ratio of the voltage squared:

[tex](u_2/u_1) = (V_2^2 / V_1^2)[/tex]

To find V2 and V1:-

C = q/V

here q is charge stored on the capacitor.

For the first case, the capacitor holds charge q, so the voltage across the capacitor is:

V₁ = q/C

The energy stored is:

[tex]U_1 = (1/2) * C * V_1^2 = (1/2) * q^2 / C[/tex]

For the second case, the capacitor holds charge 16q, so the voltage across the capacitor:-

[tex]V_2 = 16q / C[/tex]

The energy stored is:

[tex]U_2 = (1/2) * C * V_2^2 = (1/2) * (16q)^2 / C[/tex]

Reserving these values into the ratio formula:-

[tex](u_2/u_1) = (V_2^2 / V_1^2) = [(16q / C)^2 / (q / C)^2][/tex]

= [tex](16^2 * q^2 / q^2)[/tex]

= 256

Therefore, the ratio [tex]u_2/u_1[/tex] is 256.

To know more about capacitor please refer: https://brainly.com/question/17176550

#SPJ4

The conclusion that can be drawn from the timeline is that Americans realized their first national government was not strong enough.

Therefore, option A is the correct conclusion that can be drawn from the timeline.

To know more about timeline visit:

https://brainly.com/question/29720829

#SPJ1

The pH of the solution cannot be determined from the information given.

NaCl is a salt and, when dissolved in water, it dissociates into its constituent ions, Na+ and Cl-. Neither of these ions affect the pH of the solution since they are neither acidic nor basic. Therefore, the pH of a solution containing NaCl depends on any other acidic or basic substances that may be present in the solution.

To calculate the pH of a solution, we need to know the concentration of H+ ions in the solution. This information is not provided in the question. Therefore, we cannot calculate the pH of the solution using the given information.

In conclusion, the answer is not A, B, C, or D. The pH of the solution cannot be determined without additional information.

Learn more about pH here:

https://brainly.com/question/23857908

#SPJ4

The shell lands 90.8 meters past the edge of the cliff when fired at 32.6 m/s and 43.0 degrees.

To tackle this issue, we can involve the conditions of movement for shot movement, which depict the movement of an article that is sent off up high and moves affected by gravity.

In the first place, we really want to break the underlying speed of the shell into its flat and vertical parts. The point of 43.0 degrees over the flat implies that the upward part of the speed is given by:

v_y = v * sin(43.0°)

Also, the even part of the speed is given by:

v_x = v * cos(43.0°)

where v is the underlying speed of the shell, which is given as 32.6 m/s in the issue articulation.

Presently, we can involve the condition for the even distance went by a shot:

x = v_x * t

where x is the flat distance went by the shell, and t is the time it takes for the shell to arrive on the ground. We can make the opportunity t by involving the condition for the upward distance went by a shot:

y = v_y * t - 0.5 * g * t^2

where y is the upward distance gone by the shell, g is the speed increase because of gravity (which is roughly 9.81 m/s^2 close to the outer layer of the Earth), and we can set y equivalent to the level of the bluff, 25.0 m.

Addressing for t, we get:

t = (v_y + sqrt(v_y^2 + 2 * g * y))/g

Subbing the qualities we have:

t = (v * sin(43.0°) + sqrt((v * sin(43.0°))^2 + 2 * 9.81 * 25.0))/9.81

t = 3.89 s (adjusted to two decimal spots)

Presently, we can find the even distance went by the shell:

x = v_x * t

x = 32.6 * cos(43.0°) * 3.89

x = 90.8 m (adjusted to two decimal spots)

Accordingly, the shell lands 90.8 meters past the edge of the bluff.

To learn more about projectile motion and kinematics, refer:

https://brainly.com/question/14674370

#SPJ4

The complete question is:

A cannon, located 60.0 m from the base of a vertical 25.0 m tall cliff, shoots a 15 kg shell at 43.0 ❝ above the horizontal toward the cliff.

v=32.6 m/s

The ground at the top of the cliff is level, with a constant elevation of 25.0 m above the cannon. Under the conditions of part A, how far does the shell land past the edge of the cliff?

Acceleration is a measure of how quickly an object changes its velocity, and is given by the rate of change of its velocity over time.

Of the three motions listed, changing direction and changing position are considered acceleration. This is because changing direction involves a change in velocity, even if the speed remains constant. Similarly, changing position involves a change in velocity, as the object is accelerating in a particular direction. On the other hand, changing mass is not considered acceleration because it does not affect the object's velocity. While it may affect other properties of the object's motion, such as its momentum or kinetic energy, it does not result in a change in velocity, and therefore is not considered acceleration. Acceleration is a measure of how quickly an object changes its velocity, and is given by the rate of change of its velocity over time.

Learn more about velocity :

https://brainly.com/question/17127206

#SPJ4

Answer:

A and B

Explanation:

I took the exam

Answer:

Q = C M ΔT    where C is specific heat in cal / gm*deg C

C (Fe) = .11

C (Al) = .22

obviously ΔT has to be twice as great for Iron (Fe) as for (Al) for the same amount of heat to be transferred

ΔT = Q /(C * M)      where ΔT is the change in temperature

a) iron would have the higher final temperature

In a Reverse fault, the hanging wall block moves up with respect to the footwall block.

Reverse fault is a type of fault in which two blocks of earth's crust move away from each other, resulting in the upper block of crust being pushed up above the lower block. It is the opposite of a normal fault, in which two blocks of crust move towards each other. The reverse fault typically occurs when the Earth’s tectonic plates come together and a compressional force pushes up and over the lower plate. This type of fault is usually seen in regions of convergence between two plates and is common along convergent plate boundaries. The reverse fault is usually accompanied by large earthquakes as the plates move against each other. The reverse fault can also be caused by the bending of the Earth’s crust in response to forces such as erosion, volcanic activity and sedimentation. These forces can cause the crust to buckle and rise, resulting in a reverse fault.

To learn more about Reverse fault
https://brainly.com/question/9525597
#SPJ1

Each element's spectra are distinct because each element has a different amount of electrons and hence various energy levels.

Astronomers can identify not only the element, but also the temperature and density of that element in the star, using spectral lines. The spectral line can also inform us about the star's magnetic field. The line's width can tell us how rapidly the material is travelling. This teaches us about the winds in the stars. Because the emission spectrum differs for each element of the periodic table, it may be used to establish the composition of a substance. One example is astronomical spectroscopy, which involves analyzing received light to determine the composition of stars. Since various elements contain varying quantities of protons and varied numbers and configurations of electrons, their spectra differ. Differences in spectra indicate variances in the amount of energy absorbed or released by atoms when their electrons travel between energy levels.

Learn more about temperature from here;

https://brainly.com/question/30354045

#SPJ4

The ball can go a maximum distance of 39.2 meters as long as it doesn't collide with the ceiling while having a speed of 28m/s.

To find the maximum range of the ball fired from the toy cannon, we can use the equations of motion for a projectile. The maximum range occurs when the projectile lands at the same height from which it was fired. In this case, the ball must not hit the ceiling during its flight, so we need to ensure that the maximum height it reaches is less than the ceiling height.

The time of flight of the projectile can be calculated using the vertical component of the initial velocity and the acceleration due to gravity. Since the initial speed of the projectile is 28 m/s and the angle of elevation is not given, we can assume that the projectile is fired at an angle of 45° with the horizontal, which gives equal vertical and horizontal components of velocity. The vertical component of the initial velocity is therefore:

[tex]v_0_y = v_0 sin45 = 28/\sqrt{2 m/s}[/tex]

The acceleration due to gravity is[tex]-9.8 m/s^2[/tex]

[tex]h = v_0_y * t + (1/2) * g * t^2[/tex]

here,

h is  maximum height reached by the projectile.

At the maximum height, the vertical component of the velocity becomes zero:-

[tex]0 = v_0_y * t + (1/2) * g * t^2[/tex]

[tex]t = (v_0_y / g)[/tex]

Reserving given:-

[tex]t = (28/\sqrt{2 m/s)} / 9.8 m/s^2[/tex]

t = 2.02 s (approx.)

The horizontal range of the projectile can be calculated using the horizontal component of the initial velocity and the time of flight of the projectile.

[tex]v_0_x = v_0 cos45 = 28/\sqrt{2 m/s}[/tex]

The horizontal range:-

[tex]R = v_0_x * t[/tex]

Reserving values:-

[tex]R = (28/\sqrt{2 m/s} ) * 2.02 s[/tex]

R = 39.2 m (approx.)

Therefore, the maximum range of the ball fired from the toy cannon, without hitting the ceiling, is approximately 39.2 meters.

To know more about speed please refer: https://brainly.com/question/30265720

#SPJ4

The correct option is A,  the kinetic energy of the brick it was converted to other energy forms, mostly heat.

Kinetic energy is the strength possessed with the aid of a moving object because of its motion. Any object that is in motion has kinetic energy, regardless of its size or shape. The amount of kinetic energy an object has depends on its mass and velocity, and is given by the formula KE = 1/2 mv^2, where KE is the kinetic energy, m is the mass of the object, and v is its velocity.

Kinetic energy can be converted into other forms of energy, such as thermal energy, as a result of collisions or other interactions. It is an important concept in physics and plays a crucial role in understanding the behavior of objects in motion. The quicker an item actions, the more kinetic energy it has.

To learn more about Kinetic energy visit here:

brainly.com/question/30107920

#SPJ4

Complete Question: -

A brick slides across a horizontal rough surface and eventually comes to a stop. What happened to the kinetic energy of the brick?

a)It was converted to other energy forms, mostly heat.

b)It was converted to a potential energy of friction.

c)It was simply destroyed in the process of stopping.

d)Nothing, it is still in the brick but is now called potential energy.

The charge is positive.

We know that a charge can be positive or negative. We can see that the question is showing us the way that we can be able to obtain the magnitude of the charge that is labelled Q1 when we have the charges Q2 and Q3.

The charge Q2 can be see to be sandwiched in between Q 1 and Q2. We have seen the solution to the problem in the image that have been attached.

To know if the charge is positive or negative, we look at the sign attached to the magnitude of the charge.

Learn more about charge:https://brainly.com/question/3412043

#SPJ

The value of charge Q1 is - 20 μC.

option A.

The value of charge Q1 is calculated by applying Coulomb's law of electrostatic force.

F = kq₁q₂/r²

where;

F (net) = Q12 + Q23 = 0

The force between charge 1 and 2 is calculated as;

F (12) = ( 9 x 10⁹ x 10 x 10⁻⁶ x Q1 ) / ( 2a)²

F (12) = 22,500 (Q1/a²)

The force between charge 2 and 3 is calculated as;

F (23) =  ( 9 x 10⁹ x 10 x 10⁻⁶ x 5 x 10⁻⁶) / (a)²

F(23) = (0.45) /(a²)

22,500 (Q1/a²) + (0.45) /(a²) = 0

22,500 (Q1/a²)  = -  (0.45) /(a²)

22,500Q1 = -0.45

Q1 = -0.45 / 22,500

Q1 = - 2 x 10⁻⁵ C

Q1 = -20 x 10⁻⁶ C

Q1 = - 20 μC

Learn more about electrostatic force here: https://brainly.com/question/17692887

#SPJ1

X-rays are used for crystallography because they have a much smaller wavelength than visible light or UV light, making them capable of diffracting off the regular array of atoms within a crystal lattice.

The regularity of the crystal lattice causes the X-rays to undergo constructive interference, creating a diffraction pattern that can be used to determine the structure of the crystal. X-rays are also highly energetic, allowing them to penetrate the surface of the crystal and interact with the atoms in the interior. While other types of electromagnetic radiation could be used, their longer wavelengths and lower energy levels would not be able to penetrate the surface of the crystal or diffract off the atoms in the lattice, making them less effective for crystallography. X-rays are used for crystallography because they have a much smaller wavelength than visible light or UV light, making them capable of diffracting off the regular array of atoms within a crystal lattice.

Learn more about X-rays :

https://brainly.com/question/23281551

#SPJ4

The acceleration of cheetah from rest to a speed of 21.0 m/s in 6.75 s is 3.1m/s2.

Given the speed of cheetah (v) = 21m/s

The time of acceleration from rest to given speed (t) = 6.75s

The acceleration of cheetah = am/s^2

We know that acceleration = speed of object/time of acceleration = v/t

Acceleration is the rate of change of velocity. It is the change in speed or direction of an object over a period of time. It is related to speed and time in that it is the rate at which the speed of an object changes over a given amount of time.

then a = 21/6.75 = 3.1m/s^2

To learn more about acceleration click here https://brainly.com/question/12550364

#SPJ4

Answer:

1171,875 N/m^2.

Explanation:

First, we need to calculate the area of each leg of the stool. We can do this by finding the radius of the leg and then using the formula for the area of a circle:

Area = pi * radius^2

Diameter = 2.5 cm = 0.025 m

Radius = Diameter / 2 = 0.025 / 2 = 0.0125 m

Area = pi * 0.0125^2 = 0.00016 m^2

Next, we can find the total force being applied to each leg of the stool by the student by using the formula for weight:

Weight = mass * gravity = 75 kg * 10 m/s^2 = 750 N

Since there are 4 legs, each leg has to support 750 N / 4 = 187.5 N

Finally, we can find the pressure under each leg of the stool using the formula:

Pressure = Force / Area = 187.5 N / 0.00016 m^2 = 1171,875 Pa = 1171,875 N/m^2

So, the pressure under each leg of the stool is 1171,875 N/m^2.

When two surfaces experience friction with each other, the particles on the surfaces are affected in two ways: movement and spacing. The particles on the surfaces move against each other, creating a force that resists the motion of the two surfaces. This force is known as friction. At the same time, the particles on the surfaces are also pushed apart, creating a small gap between the two surfaces. This gap is known as the coefficient of friction, and it affects the amount of friction that is experienced between the two surfaces.

Answer:

Q3) B Q4) D

Explanation:

I looked at the photo and they were circled. Hope this helps!!