Can you pls help to draw this sketch of interpretation of a square prism properly PLS HELP

The complete stress distribution obtained by superposing the stresses produced by an axial force and a bending moment is correctly represented by F/A - (My)/(Iz).

Compressive and tensile forces expand withinside the path of the beam axis beneath neath bending loads. These forces set off stresses at the beam. The most compressive pressure is observed on the uppermost fringe of the beam whilst the most tensile pressure is positioned on the decrease fringe of the beam.

The bending pressure is computed for the rail through the equation Sb = Mc/I, wherein Sb is the bending pressure in kilos in keeping with rectangular inch, M is the most bending second in pound-inches, I is the instant of inertia of the rail in (inches)4, and c is the space in inches from the bottom of rail to its impartial axis.

Read more about beam;

https://brainly.com/question/25329636

#SPJ1

Answer:

A. Wire Harness

When reassembling a locking hub mechanism, it is a good idea to replace the bearing seal.

It should be noted that the bearing seal is used to prevent contaminants from reaching the inside of the parts and also from preventing the lubricant leaking.

In this case, when reassembling a locking hub mechanism, it is a good idea to replace the bearing seal.

Learn more about bearing on:

brainly.com/question/22719608

#SPJ12

Answer:

White lane lines separate lanes of traffic moving in the same direction. (UK)

A driver should have at least a 10 mph speed advantage when overtaking (passing) another vehicle.

A speed limit refers to the maximum amount of speed that is legally permitted or allowed in a specific area for safety. Thus, this limit must be abided and strictly adhered to by all road users such as drivers of a vehicle.

According to the highway traffic code and regulations, a driver should have at least a 10 mph speed advantage when overtaking (passing) another vehicle.

Read more on safety here: https://brainly.com/question/14751268

#SPJ12

When starting a vehicle with an automatic transmission, be sure the gear selector is set in (P)ark or (D)rive.

Automatic cars are those who have automatic options for shifting of gears. We do not have to adjust the gears by ourselves.

These cars have mode of Park, if we are moving the car, to start the car we must change it from Park to drive mode.

Thus, the fill the blank is Drive.

Learn more about automatic cars

https://brainly.com/question/14646065

#SPJ1

The maximum volume flow rate of water is determined as 0.029 m³/s.

The power of the pump is watt is calculated as follows;

1 hp = 745.69 W

7 hp = ?

= 7 x 745.69 W

= 5,219.83 W

η = mgh/P

mgh = ηP

m = ηP/gh

m = (0.82 x 5,219.83)/(9.8 x 15)

m = 29.12 kg/s

V = m/ρ

where;

V = (29.12)/(1000)

V = 0.029 m³/s

Learn more about volume flow rate here: https://brainly.com/question/21630019

#SPJ12

Let's not take into account atmospheric pressure.

Pressure P = Pressure of oil column + Pressure of water column

= h1 . d1.g + h2.d2. g

=( 0.5 x 800 x 9.8) + ( 1x 1000x 9.8) = 3920+ 9800 = 13720

Hence guage pressure at bottom is

P= 13720 N/ m^2

The last item on the vehicle starting checklist before a driver begins to travel is for the driver to release the service brake.

The Release Parking Brake message implies that your parking brake is said to be currently engaged and as such one needs to  release the parking brake before one can be able to drive the vehicle.

Therefore, The last item on the vehicle starting checklist before a driver begins to travel is for the driver to release the service brake.

See full question below

what is the last item on the vehicle starting checklist before a driver begins to travel?

Learn more about checklist from

https://brainly.com/question/16041035

#SPJ11

The specific structural combination at the elbow joint that prevents it from hyperextension is olecranon process and olecranon fossa on humerus.

Olecranon process of the ulna forms the outer bump of the elbow and fits into the fossa of the humerus when the arm is extended.

The olecranon fossa is a deep triangular depression on the posterior side of the humerus, superior to the trochlea.

It provides space for the olecranon of the ulna during extension of the forearm.

Thus, the specific structural combination at the elbow joint that prevents it from hyperextension is olecranon process and olecranon fossa on humerus.

Learn more about olecranon process here: https://brainly.com/question/15380444

#SPJ12

On the print you would expect the pitch diameter of the gear to be 9.00 inches. Option A is right.

Gear ratio = 1/3

This is solved as number of teeth on pinion / teeth on gear

= Np/Ng

The pitch diameter = 1.5 x 2

= 3

Diametral pitch = 12

NP = 3 x 12 = 36

This is the teeth on piston

Ng = 3NP

Ng = 3 * 36

= 108

Hence pitch diameter = 108/12 = 9

Read more on pitch diameter here:

https://brainly.com/question/13039932

#SPJ1

The exit pressure will be 1.3273 bar = 0.1327 MPa and the exit specific internal energy 228.61 KJ/Kg .

1.) In graph,

1-2 = Compressor

3-4 = Throttle value

[tex]T_{1} \\[/tex] = [tex]T_{4}[/tex] = -20°C = 253 K

[tex]T_{3}[/tex] = 25°C = 298 K

[tex]P_{3}[/tex] = 0.8 MPa

Assuming saturated fluid is entering the value at point (3),

using table of R-134a properties

∵ [tex]h_{3} =h_{4}[/tex] = 234.49 KJ/Kg (at 25°C,8 bar)

at [tex]T_{3}[/tex] = 25° , [tex]P_{3}[/tex] = 0.8 MPa =8 bar

At -20°C,   [tex]hf_{4}[/tex] = 173.6 KJ/Kg

                 [tex]hg_{4}[/tex] = 386.6 KJ/Kg

[tex]h_{4} = hf_{3} + n_{4} ( hg_{4} - hf_{4} )[/tex] = 234.49

173.6 + [tex]n_{4}[/tex] [386.6 - 173.6] = 234.49

             [tex]n_{4}[/tex] = 0.285

[tex]P_{4} = P_{1} = P_{sat}[/tex] = 1.3273 bar = 0.1327 MPa

2.)

Exit specific internal energy, using table R-134a

[tex]U_{4} = uf_{4} + n_{4} (ug_{4} - uf_{4} )[/tex]

at -20°c, [tex]uf_{4}\\[/tex] = 173.65, ufg = 192.85 KJ/ Kg

[tex]U_{4}[/tex] = 173.65 + 0.285 (192.85)

[tex]U_{4}[/tex] = 228.61 KJ/Kg

Learn more about Refrigerant here https://brainly.com/question/26395073

#SPJ10

Answer:

i don't know

please mark me brainlist

The minimum and maximum required footing projections for a concrete footing having a thickness of 8 inches will be 4 inches and 8 inches.

It should be noted that footing projections are important for construction purposes

In this case, the minimum and maximum required footing projections for a concrete footing having a thickness of 8 inches will be 4 inches and 8 inches.

Learn more about projection on:

brainly.com/question/3703881

#SPJ12

Answer:

4th generation computers

Silicon chips are used primarily in relays. The correct option is B.

The brain of the device is made up of silicon chips, which control all of its internal mechanisms. Tablets, smartphones, and laptops are a few examples.

The invention of silicon chips led to the revolutionization and miniaturization of technology, as well as the creation of the contemporary computer.

Instead of the slow computers that used to take up entire rooms, it made it possible to create fast computers that fit in people's homes and eventually portable computers.

Relays are electrically powered switches that operate by receiving electrical signals from other sources to open and close circuits.

Therefore, the correct option is B. relays.

To learn more about silicon chips, refer to the link:

https://brainly.com/question/11077408

#SPJ5

The question is incomplete. Your most probably complete question is given below:

A. integrated circuits

B. relays

C. motors

D. transformers

Chemicals pose a variety of hazards the six (6) types of health hazards are Corrosives, Irritants, Sensitizers, Carcinogens, Mutagens,Flammable.

To become aware of if a substance is dangerous, test the product's box label and/or the SDS that is to be had from the supplier. If a product isn't categorized as a dangerous chemical beneathneath the Work Health and Safety Act 2011, a SDS isn't required and consequently might not be availableIn the workplace, we discover  varieties of chemical dangers: fitness dangers and physicochemical dangers.1Asphyxiants.

There are many varieties of dangerous chemicals, such as neurotoxins, immune agents, dermatologic agents, carcinogens, reproductive toxins, systemic toxins, asthmagens, pneumoconiotic agents, and sensitizers.

Read more about the health :

https://brainly.com/question/1382377

#SPJ1

Answer:

Cylindrical

Explanation:

A cylindrical grinder is a tool for shaping the exterior of an item. Although cylindrical grinders may produce a wide range of forms, the item must have a central axis of rotation. Shapes such as cylinders, ellipses, cams, and crankshafts are examples of this. Cylindrical grinding machines are specialized grinding machines that are used to process cylinders, rods, and similar workpieces. The cylinders revolve in one direction between two centers, while the grinding wheel or wheels are close together and rotate in the other direction.

The force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex].

The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

A rigid, horizontally extending structural member known as a cantilever is supported at only one end. Typically, it extends from a solidly affixed flat vertical surface, such as a wall.

Given that:-

The spring force will be calculated as:-

[tex]F = kx[/tex]

Deflection will be given by:-

[tex]x = \dfrac{PL^3}{3EI}[/tex]

The spring force will be calculated by:-

[tex]F = \dfrac{KPL^3}{3EI}[/tex]

The deflection of the beam will be given as:-

[tex]\rho = \dfrac{0.15KPL^3}{3EI}[/tex]

Therefore the force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex]..The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

To know more about Cantilever beam follow

https://brainly.com/question/16791806

#SPJ1

The Role of energy consumption in formulating energy policies are:

Energy policy is known to be a vital factor in economic development as it is known to be the total regulatory framework that helps to know the boast in global attractiveness and others.

Note that he Role of energy consumption in formulating energy policies are:

Learn more about Energy policy from

https://brainly.com/question/10732684

#SPJ1

Exit lanes give drivers an ample time and space to minimize (reduce) their speed to what is posted and prepare them for the sharpness of the curve.

A speed limit is the maximum amount of speed that is legally permitted in an area for safety. Hence, this limit must be abided and strictly adhered to by all road users such as drivers of a vehicle.

As a safety precaution, Exit lanes are constructed to give drivers an ample time and space to minimize (reduce) their speed to the required  speed limit posted and prepare them for the sharpness of the curve.

Read more on safety here: https://brainly.com/question/14751268

#SPJ12

The probability that one will win back at least the cost of three tickets is approximately 0.31744. This is solved using Binomial Distribution Model.

The Binomial Distribution Model is a mathematical model of probability that allows one to decipher the probability of success of a group of possibilities within a range of specifically repeated processes.

Given that non-losing tickets (n) is: 5

Tickets gotten with non-losing probability p = 2/5 = 0.4

Note that probability here is given as:

Pr [X ≥ 3] = [tex]\sum_{x=3}^{5}.[/tex][tex]\binom{n}{x}[/tex] pˣ (1-p)ⁿ⁻ˣ

→ [tex]\sum_{x=3}^{5}.[/tex][tex]\binom{n}{x}[/tex] (0.4)ˣ (0.6)⁵⁻ˣ

= 992/3125

= 0.31744

Learn more about binomial distribution at:
https://brainly.com/question/14565246
#SPJ1

Given the indices stated above, the correct temperature distribution is: k1 = 2k2. See the definition of temperature distribution below.

The Solution to the linear heat flow equation is what is known as thermal distribution.

It measures heat transfer with respect to normal or natural phenomena such as:

Learn more about temperature distribution at:
https://brainly.com/question/15199818
#SPJ1

The plastic region of the stress-strain curve for a metal is mainly characterized by a power function known as the flow curve.

The plastic region of a stress-strain curve can be defined as the portion where some permanent deformation occurs in a material, even if the load is removed.

Based on scientific information and records, the plastic region of the stress-strain curve for a metal is mainly characterized by a power function known as the flow curve.

Read more on plastic region here: https://brainly.com/question/6869400

#SPJ12

Control systems govern the behavior of dynamic systems, while electronic systems are the ones that package the tiny components needed to conduct electricity. Thus, option E is correct.

Thematic groups are made up of individuals who focus on the same theme or idea. Thematic teams working on various initiatives and concepts are made up of individuals with experience in various systems.

Learn more about thematic group, here:

https://brainly.com/question/32731

#SPJ1

The selective thickness shims are measured with an outside micrometer.

It should be noted that a micrometer simply means an instrument for making precise linear measurement of dimensions.

In this case, the selective thickness shims are measured with an outside micrometer.

Learn more about micrometer on:

brainly.com/question/2176082

#SPJ12

The relevant population for the below foci example is a small population and:

This is known to be a kind of probability sampling where the researcher randomly takes a subset of participants from a given population.

Note that the member of the population has an equal chance of being selected and as such, in the case above, The relevant population for the below foci example is  small population and:

Learn more about population from

https://brainly.com/question/25630111

#SPJ1

The time for a particle of water leaving this orifice to reach point B and the horizontal distance are 0.553 seconds and 3.46 meters respectively.

First of all, we would determine the velocity of the water jet discharging from the orifice by using this formula:

V = √(2gh)

V = √(2 × 9.81 × 2)

V = 6.264 m/s.

Next, we would determine the time taken to reach point B as follows:

S = Sa + Uy(t) + ½at²

-1.5 = 0 + 0(t) + ½ × (-9.81) × t²

t = 0.553 seconds.

Now, we can determine the horizontal distance:

x = xa + Vt

x = 0 + 6.264(0.553)

x = 3.46 meters.

Read more on horizontal distance here: https://brainly.com/question/17372548

#SPJ1

The Overall heat transfer coefficient and the length of pipe required was 9.48x10 J and the length of pipe required is 57m.

Warmness transfer, all or any of numerous forms of phenomena, taken into consideration as mechanisms, that deliver power and entropy from one place to another. The unique mechanisms are commonly known as convection, thermal radiation, and conduction.

Read more about the length :

https://brainly.com/question/2217700

#SPJ1

The house has an overall horizontal emphasis.

Emphasis in architecture is the strategy that is used to draw the viewer's attention to a design.

Here, the house has rectangular angles, close to the ground, and a bank of windows. This depicts a horizontal axis.

Learn more about architecture on:

brainly.com/question/9760486

#SPJ12