a) Mirrors
Mirror requires the high luster of metals in order to work.
What causes the highest luster of a metal?When light shine on to the surface of a metal, its electrons absorb small amounts of energy and become excited into one of its many empty orbitals.
The electrons immediately fall back down to lower energy levels and emit light.
This process is responsible for the high luster of metals.
Here,
Mirrors have metal coating on its back side, because of high reflective property , high lustrous mirror is preferred . When metal is more lustrous, the less light reflect into it and bounces back.
Coating one side of a piece of glass with shiny metals can turn it into a mirror, reflecting light coming toward it.
Window glass can reflect only eight percent of light hitting it, while mirrors can reflect 95 percent of light hitting them.
The glass in a mirror is usually coated with a layer of silver or aluminum.
Mirrors are shiny because when photons (rays of light) coming from an object , it strike the smooth surface of a mirror, then they bounce back at the same angle. Our eyes see these reflected photons as a mirror image.
Therefore,
Mirror requires the high luster of metals in order to work.
Learn more about properties of metal here:
https://brainly.com/question/18153051
#SPJ1
Answer:A) mirrors
Explanation:
If a 100 N block is resting on a steel table with a coefficient of
static friction μs = 0.68, then what minimum force is required to
move the block?
Answer:
6800
Explanation:
100 x 0.68=6800
Answer: 68
Explanation:
When compared to wave II, wave I represents a wave with...
Select one:
a. a higher frequency.
b. a lower frequency.
c. an equal frequency.
d. a greater amplitude.
Wave I stands for a wave with an equal frequency as wave II. Option c is correct.
What is the frequency?Frequency is defined as the number of repititions of a wave occurring waves in 1 second. Its unit is Hz.
Frequency is given by the formula as,
[tex]\rm f = \frac{1}{t}[/tex]
Where,
f is the frequency
t is the period of the wave
From the digrame it is observed that both the wave has the same period. So that they will have the same frequency.
Hence option c is correct.
To learn more about the frequency reference the link;
https://brainly.com/question/14926605
#SPJ1
Taking the density of air to be 1.29 kg/m3, what is the magnitude of the angular momentum (in kg · m2/s) of a cubic meter of air moving with a wind speed of 73.0 mi/h in a hurricane? Assume the air is 51.2 km from the center of the hurricane "eye."
The magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s
The rotating equivalent of linear momentum in physics is called angular momentum. Because it is a conserved quantity—the total angular momentum of a closed system stays constant—it is significant in physics. Both the direction and the amplitude of angular momentum are preserved.
Given the density of air to be 1.29 kg/m3 and a wind speed of 73.0 mi/h
We have to find the magnitude of the angular momentum
Let,
ρ = Density of air = 1.29 kg/m^3
v = Speed of wind = 73.0 mi/h = 0.032 km/s
M = angular momentum of air
Let the volume of air be 1 m^3
Mass = Volume x ρ = 1 x 1.29 = 1.29 kg
Momentum = M = mass x velocity
Momentum = 1.29 x 0.0032
Momentum = 4.128 x 10^(-3) kg·m^2/s
Hence the magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s
Learn more about angular momentum here:
https://brainly.com/question/7538238
#SPJ10
28. An electron with a speed of 4.0 x 10° m/s enters a uniform magnetic field of magnitude 0.040 T at an angle of 35 degrees to the magnetic field lines. The electron will follow a helical path. a) Determine the radius of the helical path. b) How far forward will the electron have moved after completing one circle?
Answer:
r= 1.09×10^-4
Explanation:
Given
V=speed=4.0×10^5 m/s
B= magnetic field= 0.040 T
©=angle= 35°
m= mass of electron= 9.11×10^-31
q= charge of electron= 1.60×10^-19
solution
qv×B= mv²/r
qvBsin©=mv²/r
qBsin©=mv/r
r=mv/qBsin©
r=9.11×10^-31× 4.0×10^5/1.064×10^-19×0.04T(sin35°)
r= 1.09×10^-4 m
a) r = 1.09 * [tex]10^{-4}[/tex] m
b) Distance travelled : 6.845 * [tex]10^{-4}[/tex] m
What is an electron ?
An electron is a stable subatomic particle with a charge of negative electricity, found in all atoms and acting as the primary carrier of electricity in solids.
given
charge of electron : 1.6 * [tex]10^{-19}[/tex] C
mass of electron = 9.11 * [tex]10^{-31}[/tex] kg
v = 4.0 x 10 m/s
B = 0.040 T
theta = 35 degrees
since ,
force in magnetic field on electron = centripetal force
a) q(v*B) = m [tex]v^{2}[/tex] / r
q v B sin(theta) = m [tex]v^{2}[/tex] / r
r =m v /q B sin(theta)
r = 9.11 * [tex]10^{-31}[/tex] * 4.0 x [tex]10^{5}[/tex]/ 1.6 * [tex]10^{-19}[/tex] sin (35)
r = 1.09 * [tex]10^{-4}[/tex] m
b) far forward will the electron have moved after completing one circle will be equal to circumference of the circle = 2πr
= 2 * 3.14 * 1.09 * [tex]10^{-4}[/tex] m = 6.845 * [tex]10^{-4}[/tex] m
learn more about electron
https://brainly.com/question/1255220?referrer=searchResults
#SPJ2
If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits___, ____, ____, and ____, and all planets will orbit the sun successfully.
Pleas help this is Flvs comprehensive science class
6.01 please please help
So, the complete sentence is If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits 84, 1, and 5, and all planets will orbit the sun successfully for the best conditions.
When the mass of the sun is larger, Earth moves around the sun at a faster pace and When the mass of the sun is smaller, Earth moves around the sun at a slower pace.
When Earth is closer to the sun, its orbit becomes faster and When Earth is farther from the sun, its orbit becomes slower.
When Earth is closer to the sun, there will be a hotter climate. A little movement that takes one closer to the sun could lead to a huge impact, as the sun is very hot.
So, it can be concluded that If the mass of the sun is 2x, at least one planet will fall into the habitable zone if I place a planet in orbits 84, 1, and 5, and all planets will orbit the sun successfully for the best conditions.
Learn more about Sun here:
https://brainly.com/question/15837114
#SPJ10
Suppose the ski patrol lowers a rescue sled carrying an injured skier, with a combined mass of 97.5 kg, down a 60.0-degree slope at a constant speed, as shown in the Figure. The coefficient of kinetic friction between the sled and snow is 0.100.
a) How much work, in joules, is done by friction as the sled moved 28 m along the hill?
b) How much work, in joules, is done by the rope on the sled this distance?
c) What is the work, in joules done by the gravitational force on the sled?
d) What is the net work done on the sled, in joules?
a. 1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.
b.21,835 J work, in joules, is done by the rope on the sled this distance.
c. 23,170 J the work, in joules done by the gravitational force on the sled d. The net work done on the sled, in joules is 43,670 J.
What is friction work?
The work done by friction is the force of friction times the distance traveled times the cosine of the angle between the friction force and displacement
a. How much work is done by friction as the sled moves 28m along the hill?
ans. We use the formula:
friction work = -µ.mg.dcosθ
= -0.100 * 97.5 kg * 9.8 m/s² * 28 m * cos 60
= -1337.3 J
-1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.
b. How much work is done by the rope on the sled in this distance?
We use the formula:
Rope work = -m.g.d(sinθ - µcosθ)
rope work = - 97.5 kg * 9.8 m/s² * 28 m (sin 60 – 0.100 * cos 60)
= 26,754 (0.816)
= 21,835 J
21,835 J work, in joules, is done by the rope on the sled this distance.
c. What is the work done by the gravitational force on the sled?
By using the formula:
Gravity work = mgdsinθ
= 97.5 kg * 9.8 m/s² * 28 m * sin 60
= 23,170 J
23,170 J the work, in joules done by the gravitational force on the sled .
D. What is the total work done?
By adding all the values
work done = -1337.3 + 21,835 + 23,170
= 43,670 J
The net work done on the sled, in joules is 43,670 J.
Learn more about friction work here:
https://brainly.com/question/14619763
#SPJ1
Q3, A ball of mass 5.0 kg moving with a Velocity of 10.0 ms collides
with a 15.0 kg ball moves with a Velocity of 4 ms! If both balls
Stick together after Collision, Calculate their Common Velocity after Impact if they initially moves in The Same direction, and Opposite direction.
Answer:
Their common velocity after the collision will be 5.5m/s
Explanation:
look at the attachment above ☝️
which has more KE, a 2 g bee flying at 1 m/s, or a 1 g wasp flying at 2 m/s
Answer:
the 1 gram wasp
Explanation:
To start off with this problem, write down every piece of information and do neccessary conversions.
mass of bee = 2 grams = 0.002 kg
speed of bee = 1 m/s
mass of wasp = 1 gram = 0.001 kg
speed of wasp = 2 m/s
now, we will use the kinetic energy formula and compare the answers
KE BEE = 0.5 (0.002 kg)(1 m/s)^2 = 0.001 Joules
KE WASP = 0.5(0.001 kg)(2 m/s)^2 = 0.002 Joules
0.002 J > 0.001 J
Mark is diving to the bottom of a pool to pick up a penny. Which of the
following describes the fluid pressure on his ears as he dives?
A. The fluid pressure increases as he dives.
B. After he dives, the fluid pressure increases and then decreases as
he dives deeper.
C. The fluid pressure on his ears doesn't change as he dives.
D. The fluid pressure decreases as he dives.
Answer:
A
Explanation:
As you go deeper, the pressure increases because the water is going farther away from the air and atmosphere
A plane leaves with an acceleration of 6.34 m/s squared and takes 1.5 hours to stop. What is the speed of the plane? What was the distance it traveled?
The answer to this question is Initial velocity of plane will be 34236 m/s and 92437.2 Km is the distance travelled by it.
Three equation of motion are:-
v = u + ats = ut + (1/2)at²v² - u² = 2asWhere v is final velocity, u in initial velocity, s is the displacement by the object, a is the acceleration and t denotes the time.
In question we have given deceleration as 6.34 m/s² and time as 1.5 hour which is equal to 5400 seconds.
Applying equation 1 to find the initial speed of plane
v = u + at
0 = u + (-6.34 × 5400) {v=0 as plane will stop after 5400 sec}
u = 6.34 × 5400
u = 34236 m/s
Initial velocity of plane is 34236 m/s
Applying equation 2 to find the displacement of plane in that time period
s = ut + (1/2)at²
s = ( 34236 × 5400 ) - ( (1/2) × 6.34 × 5400² )
s = 5400 × ( 34236 - ((1/2) × 6.34 × 5400) )
s = 5400 × ( 34236 - 17118 )
s = 5400 × 17118 metres
s = 5.4 × 17118 Km
s = 92437.2 Km
Distance travelled by plane is 92437.2 Km
So, the initial velocity of plane will be 34236 m/s and the displacement of plane in that time period will be 92437.2 Km.
Learn more about Motion here:
https://brainly.com/question/25951773
#SPJ10
water
0.6m
water wave
tank
How long does it take for the wave to return to the
position XY, but moving to the right?
[3]
b A man is cutting down a tree with an axe. He
hears the echo of the impact of the axe hitting
the tree after 1.6 s.
i What sort of obstacle could have caused the
echo?
ii The speed of sound is 330 m/s. How far is
the tree from the obstacle?
c Distinguish between the nature of the sound
wave in b and the water wave in a.
[2]
ii the amplitude of
b The cone of a louds
diagram shows how
out in front of the c
loudspeaker
P is a compression,
i
Describe how
changes from
ii Describe the
the sound w
iii Copy the di
and mark a
wavelength
5 a The first diagrams
Answer:
Discrimination is the worst thing in the world you can't even do a thing so you will do such a physical thing or do a mathematics problem ok done it's ok
an object is 27.0 cm from a concave mirror of focal length 15.0 cm. find the image distance.
The distance of the Image will be -33.75 cm
A concave mirror has an inward-curving reflecting surface that faces away from the light source. Unlike convex mirrors, a concave mirror's image forms a variety of images based on the object's proximity to the mirror.
Given that, an object placed 27 cm from a concave mirror having the focal length of 15 cm
We have to find distance of the Image
Using Mirror Formula:
1/f = 1/v + 1/u
Where,
f = focal length
v = Image distance from the mirror
u = object distance from the mirror (concave)
Substitute the known values in the above formula to find the value of 'v' i.e. from the mirror.
1/(-15) = 1/v + 1/(-27)
1/(-15) = 1/v - (1/27)
1/v = -0.029
v = -33.75 cm
Therefore the distance of the Image will be -33.75 cm
Learn more about concave mirror here:
brainly.com/question/9816370
#SPJ10
A uniform plate of height 1.870 m is cut in the form of a parabolic section.
The lower boundary of the plate is defined by: y = 0.500[tex]x^{2}[/tex]. Find the distance from the rounded tip of the plate to the center of mass.
The distance from the rounded tip of the plate to the center of mass is 1.87 m.
What is center of mass?The center of mass is a point inside or outside the mass where all of the mass is concentrated.
The y-coordinate of the centroid is given by the ratio of two definite integrals;
Yc = ∫ydm/∫dm,
where dm is a density function
For the uniform plate, δ does not change with position in the plate.
Yc = ∫yδdA/∫δdA
Yc = ∫ydA/∫dA.
dA is a horizontal slice of the plate with dimensions xdy.
Solving the parabola for x,
y = 0.5x²
x = ± √(y/0.50), where the negative value corresponds to the left half of the parabola and the positive to the right half.
dA = (√(y/0.50)
= √(y/0.50))dy
= 2(√(y/0.50))dy
The limits of integration are from zero to 1.870, the top of the plate.
∫ydA = ∫2y√(y/0.50)dy = 7.232 m³
∫dA = ∫2√(y/0.50)dy = 3.868 m²
∫ydA/∫dA = 7.232 m³/3.868 m²
∫ydA/∫dA = 1.869700 m
∫ydA/∫dA = 1.87 m
Thus, the distance from the rounded tip of the plate to the center of mass is 1.87 m.
Learn more about center of mass.
https://brainly.com/question/8662931
#SPJ1
Calculate the approximate number of atoms in a bacterium, assuming the average mass of an atom is ten times the mass of a hydrogen atom. The mass of a bacterium is 10−15 kg and the mass of a hydrogen atom is of the order of 10−27 kg.
atoms
10¹¹ is the approximate number of atoms in a bacterium.
What do you understand by mass of element?
The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit (amu).
Given,
Mass of a bacterium atom = 10⁻¹⁵ kg.
Mass of a hydrogen atom = 10⁻²⁷ kg.
From the above observation ,
The average mass of an atom of the bacterium is ten times the mass of a hydrogen atom.
Atomic mass 1 bacterium atom = 10 x mass of hydrogen atom
= 10 x 10⁻²⁷ kg.
= 10⁻²⁶ kg.
Thus,
The number of atoms in a bacterium
= [tex]\frac{Total mass}{Atomicmass of 1 bacterium}[/tex]
= [tex]\frac{10^{-15} }{10^{-26} }[/tex]
= [tex]10^{11}[/tex]
The approximate number of atoms in a bacterium is [tex]10^{11}[/tex].
Learn more about bacterium here:
https://brainly.com/question/12958132
#SPJ1
Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”
Please select the best answer from the choices provided
T
F
Greek terms psyche, which means "soul" or "mind," and logos, which means "the study of," are combined to form the english word psychology. The assertion is true.
What is Psychology?Psychology is the name given to the scientific study of the mind and behavior. Psychologists are actively interested in researching and comprehending how the mind, the brain, and behavior work.
Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”The given statement is corect.
Hence the best answer from the choices provided will be true.
To learn more about the psychology refer;
https://brainly.com/question/10980588
#SPJ1
Consider the baby being weighed in Figure 4.25.
Figure 4.25
(a) What is the mass of the child and basket if a scale reading of 104 N is observed?
kg
(b) What is the tension T in the cord attaching the child to the scale?
N
(c) What is the tension T' in the cord attaching the scale to the ceiling, if the scale has a mass of 0.500 kg?
N
(d) Draw a sketch of the situation indicating the system of interest used to solve each part. The masses of the cords are negligible. (Do this on paper. Your instructor may ask you to turn in this work.)
The mass and tension due to the system are as follows:
The mass of the child and scale = 10.6 kgThe tension T, in the cord attaching the child to the scale = 104N The tension T', in the cord attaching the scale to the ceiling T' = 108.9 NWhat is tension?Tension is a type of pulling force due transmitted by means of a string or cable.
Force = mass * acceleration due to gravitya) The mass of the child and scale = 104/9.81 = 10.6 kg
b) The tension T, in the cord attaching the child to the scale = scale reading = 104N
c) The tension T', in the cord attaching the scale to the ceiling = scale reading + weight of scale
T' = 104 + (0.5 * 9.81)
T' = 108.9 N
d) The sketch is attached in the picture
In conclusion, the tension is force exerted on the cord due to the weight of the scale and the baby.
Learn more about tension force at: https://brainly.com/question/24994188
#SPJ1
A 808 kg automobile is sliding on an icy street. It collides with a parked car which has a mass of 632 kg. The two cars lock up and slide together with a speed of 15.0 km/h. What was the speed of the first car just before the collision?
The speed of the first car just before the collision is 26.73 km/h.
What is conservation of momentum principle?When two bodies of different masses move together each other and have head on collision, they travel to same or different direction after collision.
The external force is not acting here, so the initial momentum is equal to the final momentum. For inelastic collision, final velocity is the common velocity for both the bodies.
m₁u₁ +m₂u₂ =(m₁ +m₂) v
Given a 808 kg automobile is sliding on an icy street. It collides with a parked car which has a mass of 632 kg. The two cars lock up and slide together with a speed of 15.0 km/h.
Second car is parked, so its velocity will be zero.
808 x u +632 x 0 = (808 +632 ) x 15
u = 26.73 km/h
Thus, the speed of the first car just before the collision is 26.73 km/h
Learn more about conservation of momentum principle
https://brainly.com/question/14033058
#SPJ1
After watching the video below and based on your personal experiences, is there a difference
between areas in precision of control? Could there be differences between left and right cortex
based on experience such as handedness or specific skills such as playing a guitar?
Based on my personal experiences, I believe that there is a difference between areas in precision of control because there are different part of the brain that controls the functions of the body.
What is the difference between left-handed and right-handed people?From the standpoint of brain lateralization, differences do exist such as based on experience such as handedness or specific skills such as playing a guitar.
Note that Left-handers are said to have reduced or little lateralized brains, which tells us that the two halves of the brain are little different than as seen in the right-handers.
Therefore, I can say that based on my personal experiences, I believe that there is a difference between areas in precision of control because there are different part of the brain that controls the functions of the body.
Learn more about brain from
https://brainly.com/question/1247675
#SPJ1
There are several ways to model a compound one type of model is shown ?what is the chemical formula for the molecule modeled?
The is organic compound with the correct chemical formula C4H9O2.
What is a model?A model is a representation of reality. A model serves the purpose of prediction as well as explanation.
Looking at the model of the molecule we can see that it is the organic compound with the correct chemical formula C4H9O2. The molecule is shown in the image attached to this answer.
Missing parts:
There are several ways to model a compound. One type of model is shown.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Learn more about molecular models:https://brainly.com/question/156574?
#SPJ1
please help me in this questions
Answer:
Rainy daywindy daysunny daycloudy daysorry I don't know the answer of question 8.sunglassesumbrella:-(:-):-):-(day ☀️night day ☀️night Day ☀️Day ☀️night nightExplanation:
Hope I give all correct answer please mark as brainlest answer
2. Two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M (see figure). M r m L m Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects. Is the rod being compressed, stretched, or neither? If compressed/stretched, calculate the magnitude of this deformation force on the rod. If neither, explain clearly why.
The rod is stretched due to the force of gravitational attraction.
The magnitude of the deformation force on the rod is -GMm×((1/r² + 1/(L+r)²)
What is gravity?The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.
The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.
F = GMm/R²
Given are two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M. Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects.
Let the mass closer to the planet is A and the other is B
FA = Force on planet A = -GMm/r²
FB = Force on planet B = -GMm/(L+r)²
Net Force on the rod is given by the addition of the individual forces.
Fnet= FA + FB = -GMm/r² -GMm/(L+r)²
Fnet = -GMm×((1/r² + 1/(L+r)²)
Thus, the magnitude of the deformation force on the rod is derived above.
A experience more force than B, so A will stretch out from B. Hence the force is stretching the rod.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
Which of the following measurement is most significant?
A. 66.000cm
B. 0.00066cm
C. 6.600cm
D. 6.6cm
Option C. The measurement with the most significant number is 6.600 cm.
What is significant number?
Significant numbers are numbers that have significance or meaning and give more precise details about the value of the entire numbers.
66.000 cm ------> 2 significant numbers0.00066 cm -------> 2 significant numbers6.600 cm ----------> 4 significant numbers6.6 cm ---------------> 2 significant numbersThus, the measurement with the most significant number is 6.600 cm.
Learn more about significant numbers here: https://brainly.com/question/24491627
#SPJ1
143°C = _____
416 K
-130 K
0 K
143 K
The road from city A to city B is described by a car with Vm 40 km / h. When the car turns (from B to A) the average speed is 60 km / h. Find the average round trip speed.
Answer:
i think the answer is 20.......
A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m. Calculate the impulse given to the bàll by the floor
The impulse given to the ball by the floor is 0.2865 kg.m/s.
What is impulse?The change in momentum is equal to the product of impact force applied while colliding and time for that impact.
Impulse F. t = m (Vf -Vi)
where, Vf is the final velocity and Vi is the initial velocity.
A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m.
The initial velocity u = √2x 9.81 x 1.5 = 5.425 m/s
The final velocity v = √2x 9.81 x 1.2 = 4.852 m/s
Substitute the values into the expression, we get
Impulse = m(v- u)
Impulse=0.5 x (4.852- 5.425 )
Impulse = - 0.2865 kg.m/s
Thus, the magnitude of impulse given to the ball by the floor is 0.2865 kg.m/s.
Learn more about impulse.
https://brainly.com/question/16980676
#SPJ1
During a diversity management session, a manager suggests that stereotypes are a necessary part of working with others. “I have to make assumptions about what’s in the other person’s head, and stereotypes help me do that,” she explains. “It’s better to rely on stereotypes than to enter a working relationship with someone from another culture without any idea of what they believe in!” Discuss the merits of and problems with the manager’s statement.
The merits of and problems with the manager’s statement are explained below.
What is stereo typing in organizations?Extension of the social identity of the individual in groups such as working in company or studying in college is called as the stereotyping in organizations.
Merits of Stereotypes in organizations:
It relies on categorical thinkingHelps understand outside world easily'unique characteristics are difficult to recall every time.groups are identified easilyhelps filling the gaps while talking of some new culture.helps enhancing self perception and social identity.Demerits of Stereotypes:
difficulty in understanding behavior of other individual in organizations.an individual may be sometimes under or over estimated.discourages social group while entering a profession.discriminatory behavior.not helps in describing with their talent.Thus, the merits and demerits of stereotypes in organizations are explained above.
Learn more about stereotypes.
https://brainly.com/question/13281670
#SPJ1
During a NASCAR race a car goes 58 m/s around a curved section of track that has a radius of 260 m. What is the car's acceleration?
Answer:
12.9m/s^2
Explanation:
As, a=(v^2)/r
=(58^3)/260
=12.9
Jose was out drinking with his friends for nearly the whole night. The next morning he was confused and vomiting, and had a low body temperature.
Answer:
He has a hangover.
Explanation:
Just something I know.
which items can be classified as matter? check all that apply?
-pencil
-oxygen
-idea
-horse
-dream
Answer:horse
Explanation:
Please help me!
If ball C is 3 times the volume of ball D and ball D has 1/3 the mass of ball C, which has the greater density?
A. Ball C
B. Ball D
C. The Densities are equal
C. The Densities are equal.
What is density?
Density is mass per unit volume or mass of a unit volume of a material substance.
If m1, V1 and D1 = mass, volume and density respectively of ball C
m2, V2 and D2 = mass, volume and density respectively of ball D
According to the Question ,
[tex]V_{1} = 3V_{2} , m_{2} = \frac{1}{3} (m_{1} ) \\ \\= m_{1} = 3m_{2}[/tex]
Therefore,
[tex]\frac{D_{1} }{D_{2} } = (\frac{m_{1} }{V_{1} } )* (\frac{m_{2} }{V_{2} } )\\ \\= (\frac{3m_{2} }{3V_{2} })*(\frac{V_{2} }{m_{2} }) \\\\= 1[/tex]
Hence, D1 = D2
Learn more about density here:https://brainly.com/question/15164682
#SPJ1
