Draw the Lewis structure of (AsF4) Use this stnicture; conjunction with VSEPR theory, predict: a)The electron domain geometry of the molecule: b)The molecular geometry (shape ofthe molecule). c)The bond angles around the centra atom. d)The polarity of the molecule. e) The type of hybridization f the central Hom.

A line graph would best represent the relationship between pressure and Kelvin's temperature.

The x-axis would represent the Kelvin temperature while the y-axis would represent the pressure. As the Kelvin temperature increases, the pressure should also increase.

As the Kelvin temperature increases, the pressure also increases in a linear fashion. This is because when the temperature increases, the molecules of a gas move faster, resulting in higher pressure.

For more questions like Graph click the link below:

https://brainly.com/question/23006202

#SPJ4

The most common charge associated with scandium in its compounds is Indicate the chemical formulas you would expect for compounds formed between scandium and sulfur.

What we want to record are the formulas for various binary ionic compounds. We need to consider the octet rule in order to accomplish this. Atoms will either gain, lose, or share electrons to have the electron configuration of the neighboring noble gas in accordance with the octet's rule (8 valence electrons except for He with 2). Iodine and potassium, or KI

K has 1 valence electron, hence losing one electron will result in K+. I already contains 7 valence electrons, thus to create I, I will gain 1 electron. Between K+ and I, a neutral chemical called KI exists. Chlorine and magnesium - sulfur Mg has two valence electrons, it must give up two of them to create Cl and gain one electron to become

To learn more about sulfur please click on below link

https://brainly.com/question/1478186

#SPJ4

To put out the flames, roll the mannequin back and forth on the ground.

Use the drop-and-roll method to put out a fire in burning clothing, douse it in cold water, or, if an emergency shower is nearby, use it.

removed right after, and the skin should be thoroughly rinsed with water for at least fifteen minutes.Before being worn again, clothes must be cleaned.If a flammable, volatile substance is spilled, alert everyone right away, put out any flames, and ventilate any area.

To know more about chemical  visit:

https://brainly.com/question/13145357

#SPJ4

Molar heat capacity for the process is 3.1R when heated at constant volume and constant pressure, pressure becomes three times and volume gets doubled.

A diatomic ideal gas is heated at constant volume until its pressure becomes 3 times.it is again heated at constant pressure until its volume is doubled. Let the pressure, temperature and volume of the gas at A be  P,T and V respectively. so,

For diatomic gas,     CV = 5/2 R and CP =  7/2 R

For Isochoric process, Pa / Ta = PB / Tb

          => P/T =  3P /Tb

           =>  Tb = 3T

we know that the heat supplied at constant volume is,

Qv = 5/2 n R (2T)

For Isobaric process,

       VB / Tb = VC / Tc

 => Tc = 6T

and the heat supplied at constant pressure is,

QP = 7/2 nR (3T)

Now, molar heat capacity for the total process is,

Q = Qv + QP

n C (5T) = 31/2 n RT

=> C = 3.1 R

To learn more about Diatomic ideal gases please visit:

https://brainly.com/question/13103025

#SPJ4

A chemokine called chemokine ligand 3 (CCL3, also known as macrophage inflammatory protein 1) is thought to be responsible for mast cells' activation reaction.

Mast cells are white blood cells that have been extensively linked to the orchestration of allergic reactions. This might cause signs like sneezing or nasal congestion. The following signs and symptoms can be brought on by severe allergic responses, which typically involve foods, medicines, and insect stings: Just seconds after being exposed to an allergen, a severe and abrupt allergic reaction known as anaphylaxis can occur. The primary structural and operational unit of all life forms is the cell. Every cell is made up of a cytoplasm that is surrounded by a membrane and is home to a variety of biomolecules, including proteins, DNA, and RNA.

Learn more about reactions here

https://brainly.com/question/28984750

#SPJ4

While the molecular geometry of ClBr3 C l Br 3 is T-shaped because of the presence of a lone pair on the chlorine atom, the electron geometry of ClBr3 C l Br 3 is trigonal bipyramidal.

Bond angles and molecular geometry for BCl3 The structure reveals that the molecular shape of BCl3 is trigonal planar. 120° is the bond angle.

Due to the electronegativity difference between the atoms of chlorine and bromine, chlorine tribromide, an interhalogen chemical, is a polar molecule. A Chlorine atom (Cl) in the heart of the ClBr3 Lewis structure is surrounded by three Bromine atoms (Br).

To know more about chlorine tribromide visit:-

https://brainly.com/question/13400946

#SPJ4

The tertiary alcohol a type of isomer from the given is (CH3)3COH. The correct option to this question is B.

The -OH group is still bonded to a tertiary carbon atom in tertiary alcohols. Tertiary alcohol has the general formula R1R2R3COH , where R1, R2 and R3 are alkyl or aryl groups.

One -OH group is still connected to a tertiary carbon atom in (CH3)3COH (CH3)3COH (attached to three methyl groups). As a result, it is a secondary alcohol.

In essence, alcohols are chemical molecules with polar -OH functional groups. The -OH group is primarily responsible for all of alcohols' chemical characteristics. Alcohols are polar protic solvents because of their volatility.

For more information on isomers kindly visit to

https://brainly.com/question/29782186

#SPJ4

Answer:

2:1

Explanation:

oxgyen=2

nitrogyen=1

During Positron emission the mass number is unchanged and the atomic number decreases.

What is Positron emission?

Nuclear medicine procedures like positron emission tomography (PET) monitor the metabolic activity of the cells in different body tissues. In reality, PET combines nuclear medicine with biochemical analysis. It is produced by a proton-rich nucleus and is an anti-particle of a beta particle. A positron and an electron collide to produce two gamma rays with a mass of 0.511 MeV. Iron, concrete, wood, plastic, water, etc., can all be penetrated by positron gamma radiation to a depth of several inches.

What is the function of positron?

The function of your tissues and organs' metabolic or biochemical processes can be ascertained with the help of a positron emission tomography (PET) scan, a type of imaging treatment. The PET scan uses a radioactive substance (tracer) to show both normal and abnormal metabolic activity.

To know more about Positron emission, visit:

https://brainly.com/question/20388835

#SPJ4

The electronic bonding, including fractional bonds and fractional charges, of a single polyatomic species is collectively represented by resonance structures, which are a collection of two or more Lewis structures.

Resonance structures are two types of molecules where the chemical interaction is the same but where the distribution of electrons varies across the structure. Resonance happens when electrons can move between two opposing pi configurations.

Resonance is a term used in valence bond theory to describe how different contributing structures (or forms, also known as resonance structures or canonical structures) come together to generate a hybrid resonance (or hybrid structure) in certain molecules or ions.

Resonance is what you'll experience if the frequency matches the object's resonant frequency, which it does. When the vibrations of one object cause the frequency of its oscillations to increase, this is known as resonance.

learn more about Resonance structures here:

https://brainly.com/question/29547999

#SPJ4

Spill cleaning materials can be discarded by Seal it in a labeled plastic bag; then place in the solid waste container. The correct answer is D.

Spill cleaning material should be disposed of by placing them in the solid waste container after being sealed in a plastic bag with a label. This method of disposal is the safest and most ethical because it keeps the materials from contaminating or damaging the environment. It is crucial to clearly identify the bag with the contents and the date, and to properly discard it in accordance with local laws. Spill cleaning supplies should not be disposed of in other ways, such as by leaving them in the fume hood for the teacher to use or by rinsing them in the sink.

To learn more about spill refer to:

brainly.com/question/14548290

#SPJ4

Thus, E°(cell) for the balanced redox reaction is: 1.60 V  

Any chemical process in which one or more of the involved chemical species' oxidation numbers change is known as an oxidation-reduction reaction, often known as a redox reaction. The phrase refers to a vast and diversified set of processes.

Redox reactions are those that include both oxidation and reduction. Redox reactions, like displacement reactions, occur when one species loses electrons while the other gains them (gaining electrons).

The redox reaction becomes:

PbO₂(s)+4H⁺(aq)+Sn(s) → Pb²⁺(aq)+2H₂O(l)+Sn²⁺(aq)

Thus, reduction potential values for these two half-cell reaction:

PbO₂(s)+4H⁺(aq)+ 2e⁻ → Pb²⁺(aq)+2H₂O(l),     E⁰ = 1.46 V

Sn²⁺(aq) + 2e⁻ → Sn(s),           E⁰ = -0.14 V    

EMF = E(cathode) - E(anode)

or, EMF = 1.46 V - (-0.14 V)

or, EMF = 1.60 V.

Thus, E°(cell) for the balanced redox reaction is: 1.60 V  

To know more about redox reaction refer to:

https://brainly.com/question/21851295

#SPJ1

The product for each of the following SN​2 reactions

The SN2 reaction is a nucleophilic substitution process in which a bond is broken and a new one is simultaneously created. The step in the reaction that determines rate involves two reacting species.

The substrate is attacked from behind in this reaction by the nucleophile. The angle between the nucleophile and the carbon-leaving group bond as it approaches the chosen substrate is 180o. Through a transition state, the carbon-leaving group bond breaks and the carbon-nucleophile bond forms concurrently.

The leaving group is now forced out of the transition state on the other side of the carbon-nucleophile link, resulting in the formation of the necessary product. The product is created by inverting the tetrahedral geometry at the central atom, which is a crucial fact to remember.

learn more about SN2 reaction here:

https://brainly.com/question/14080839

#SPJ4

Grams of sucrose are required to make 3.0 liters of 0.50 m sucrose solution is 513 g.

The given data as :

molar mass = 342 g /mol

molarity of sucrose = 0.50 M

volume of sucrose  = 3 L

The molarity expression is given as :

molarity  = moles / volume in L

moles = molarity × volume

moles = 0.50 × 3

moles = 1.5 mol

the mass = moles × molar mass

              =   1.5   ×  342

              = 513 g

Thus, the molar mass of sucrose, or table sugar, is 342 grams. grams of sucrose are required to make 3.0 liters of 0.50 m sucrose solution is 513 g.

To learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

The NH₃ weight percentage in aqueous waste is 23.251%.

Here given,

29.44 mL of 0.1066MHCL

= (0.02944 L) * 0.1066 mol/L

= 0.003138mol HCL

= 0.003138mol NH₃

  0.003138mol NH₃ * 17.031 g/mol

= 0.05344g NH₃ in the 13.805 g aliquot

  0.05344g / 13.805 g = 0.38710612% m/m

  23.014 g original H₂O-NH₃ + 77.121 g H₂O = 100.135 g H₂O-NH₃

  0.05344g * 100.135g = 5.3512g NH₃

  5.3512g NH₃/ 23.014 g = 23.251% NH₃

The percentage weight of NH₃ in aqueous waste is 23.251%.

To learn more about weight percentage refer to :

https://brainly.com/question/28471488

#SPJ1

The correct option is A.

A proteolytic enzyme cleaves bonds that are peptides.

What is a proteolytic enzyme?

Proteolytic enzymes are enzymes that damage protein. These enzymes are formed by animals, plants, fungi, and bacteria. Proteolytic enzymes damage proteins in the body or on the skin. This might help with digestion or with the damage of proteins mixed in swelling and pain.

The correct option is A.

A proteolytic enzyme cleaves bonds that are peptides.

To know more about a proteolytic enzyme, visit:-

https://brainly.com/question/12539154

#SPJ4

We want to draw 3 resonance structures for this problem because we have no -3.

Resonance is a quality of being resonant.

We're going first. Look at the number of electrons. Nitrogen has a number. A minus charge means we add 1 more to get 24 electrons. We have a 0 electron difference because we have 3 outer atoms that are oxygen and each one of them has a single electron. It doesn't matter which oxygen we get, because we're going to need 1 double bond to get nitrogen. We're going to have a querlon resonance structure where we're just going to shift the double bond and then we're going to be asked about putting in formal charges. We don't want to only look at one atom at a time. If we have 1 bond to oxygen, that means we have 6 lon electrons to add, and if we have a double bond, we need 2 more electron pairs,

so we can look at formal charges. That's 6 bonds. The number of long electrons is 6 and that's what we have here. All singly bound oxygen's have a negative charge. Our double down oxygen still has 6 bands electrons. There are 2 bonds and 4 lone electrons, so we get zero and nitrogen has 5 on electrons. There are 4 bonds and no electrons in this location. Our overall charge is going to be negative 1, which is what we want, since we get a plus 1 charge. Your three resonance structures.

To know more about resonance click-

https://brainly.com/question/11331041

#SPJ1

Surface tension is listed from greatest to least. Whenever a liquid comes into touch with a gas, a thin elastic sheet called surface tension forms on the liquid's surface.

When the liquid surface comes into contact with the gas, this phrase is often employed (such as the air). Interface tension is a term used to describe the force at the surface between two liquids, such as water and oil.The liquid's particles are drawn together by several intermolecular forces, including Van der Waals forces. According to the illustration on the right, particles are drawn toward the liquid's interior along the surface.

The ratio of the surface force F to the length d along which the force acts is surface tension, indicated by the Greek variable gamma: gamma = F / d

An example of surface tension is water droplets. When utilizing a water dropper, the water pours out in a series of droplets rather than a continuous stream. The water's surface tension is what determines how the drops are shaped. The pull of gravity on the water drop is the only factor keeping it from being perfectly spherical. The drop would have a perfectly spherical shape in the absence of gravity because it would reduce its surface area to reduce stress.

To learn more about surface tension Please visit the below link.

brainly.com/question/11348644

#SPJ4

Q.Rank these liquids by their expected surface tension.

1.CH3CH2OCH3

2.CH3CHOHCH2-OH

3. CH3CHOHCH2-OH

4.OH-CH2CHOHCH2-OH

The Lewis structure of KrF4 can be drawn as follows:

Kr -- F

|

F

|

F

|

F

KrF4 is a chemical compound made up of the elements krypton and fluorine. It is a gas at room temperature and has a pale green color. The molecule has a tetrahedral shape, with four fluorine atoms bonded to a central krypton atom. KrF4 is used in the production of semiconductors and in the etching of microchips. It is also used in the manufacturing of glasses and ceramics. It is a highly reactive substance and must be handled with care.

Learn more about KrF4, here https://brainly.com/question/14964245

#SPJ4

So, the charge on Lewis acid (Co) is +3 . So, correct answer is :-d). +3

As we know in a coordination compound metal atoms or ions are Lewis acid . So, here Cobalt is Lewis acid .Now , the charge of ethylenediamine (en) is 0 , the charge of Cl is -1 . Let the charge on Co be X . Then as overall compound is neutral . So,

1 × X + 2 × 0 + 3 × -1 = 0

X - 3 = 0

X = +3

So, the charge on Lewis acid (Co) is +3 . So, correct answer is : d). +3

A Lewis acid can be an atom, ion, or molecule having an uncompleted octet of electrons (e.g., BF3, AlF3). Lewis acids are a subclass of molecules whose core atoms can take electrons from more than eight valence shells (e.g., SiBr4, SiF4).

Learn more about lewis acid here:

https://brainly.com/question/15570523

#SPJ4

The concentration of H2SO4 is 98% H2SO4 by mass and has a density of 1.8 g/L.

In chemistry, concentration is the amount of an ingredient divided by the total volume of the mixture. There are several types of mathematical descriptions, such as mass concentration, molarity, number concentration, and volume concentration. Concentration is usually expressed in molarity, defined as the number of moles of solute in 1 L of solution.

Specializations are specializations within the selected course. You can choose your concentration at both undergraduate and postgraduate levels, depending on which university you want to study.

Quantitative units of concentration include molarity, molarity, mass percent, parts per thousand, parts per million, and parts per billion.

Learn more about concentration here;-https://brainly.com/question/1034688

#SPJ4

The formula for the compound formed between aluminium ions and and phosphate ions is AIPO.

An ion is an atom or we can say molecule with the  net electrical charge. The charge of an electron is the  considered to be a negative by convention and  this is the  charge is equal to the  and opposite to the charge of a proton, which is considered to be positive by convention.

Aluminum Phosphate is a type of phosphate that is  formed by the anion PO43- (phosphate) and cation Al3+ (aluminium). And the  molecular or chemical formula of Aluminum or it is  Phosphate of AlPO.

To know more about ions click-

https://brainly.com/question/13692734

#SPJ1

Antibiotics are effective on bacterial cells. This means they would not work on which two infections from question 1? Common cold and influenza ("flu").

Antibiotics are a type of medication that will fight bacterial infections by killing the bacteria and preventing their growth. It will then affect living microorganisms.

It will then not be effective in viral infections since viruses are not living beings, which will not do anything to them and what will generate is that in the individual who is taking the antibiotics, the bacteria generate antibiotic resistance making it more difficult to eradicate them when it is generated by a bacterial infection.

Therefore, we can confirm that in a common cold and influenza the use of antibiotics is not going to be effective because they are caused by viral agents that will not be eradicated.

To learn more about antibiotics visit: https://brainly.com/question/10868637

#SPJ1

For the dehydrobromination of 1-bromobutane, no bubbling in the collection tube was seen after introducing heat into the system. however, bubbling can be seen in the reaction tube. to fix this situation introduce more heat in to the reaction tube.

In the dehydrobromination of 1-bromobutane, no bubbling in the collection tube was seen after the heat introduce in to system, so to fix the situation we should do :  By increasing the more heat in the reaction tube we should fix this situation.

The energy given to the system is not sufficient for the reaction. so we should increase the amount of heat in to system.

To learn more about dehydrobromination here

https://brainly.com/question/13898141

#SPJ4

Two main sources of excess co2 emitted by human activity are fossil fuel combustion and industrial processes.

What is green house gas emission?

Human-related greenhouse gas emissions increase the greenhouse effect and fuel climate change. Coal, oil, and natural gas combustion produce the majority of carbon dioxide. Carbon dioxide, methane, nitrous oxide, and smaller trace gases like hydrofluorocarbons (HFCs) and sulfur hexafluoride are only a few of the gases that make up total greenhouse gas emissions (SF6).

Of the CO2 produced by human emissions, only around 50% is still in the atmosphere. Uptake into the land biosphere and ocean account for the remaining amount, roughly split equally.

Therefore two main sources of excess co2 emitted by human activity are fossil fuel combustion and industrial processes.

To know more about green house gas emission form the following link

https://brainly.com/question/9912932

#SPJ4

If we compare the melting points of saturated fatty acids and unsaturated fatty acids, the saturated acids have higher melting points than unsaturated acids of corresponding size.

Lower the unsaturation, more will be the hydrogen atoms that fatty acid has. Hence, more saturated it is, So higher is the melting temperature of the fatty acid.

Whereas in Unsaturated fatty acids, most of the times the geometry of the double bond is a cis configuration in natural fatty acids.

So, the intermolecular interactions are much weaker than the saturated molecules.

Hence, the melting points are much lower in case of unsaturated fatty acids.

To know more about Fatty Acids:

brainly.com/question/13528495

#SPJ4

NH3, PH3, and AsH3 are all covalent compounds. SbH3 is a metallic compound.

The boiling point of a substance is a measure of the strength of the forces that hold the molecules together in the liquid state. In general, the stronger the forces between the molecules, the higher the boiling point will be.

The boiling points of NH3, PH3, AsH3 and SbH3 show a significant variation, which can be explained in terms of the different types of intermolecular forces that are present in these substances.

NH3, PH3, and AsH3 are all covalent compounds, which means that they are composed of molecules that are held together by covalent bonds. These bonds involve the sharing of electrons between the atoms in the molecule, and they are generally quite strong.

However, the strength of the intermolecular forces in these substances can vary depending on the types of atoms that are present and the way that they are bonded together. For example, NH3 has a relatively low boiling point (-33.4 oC) because the N-H bonds in the molecule are fairly weak. This allows the molecules to move more easily and escape from the liquid state at a lower temperature.

On the other hand, PH3 and AsH3 have much higher boiling points (-87.5 oC and -62.4 oC, respectively) because the P-H and As-H bonds are stronger. This makes it more difficult for the molecules to escape from the liquid state, so they need to be heated to higher temperatures in order to boil.

SbH3, on the other hand, has a much lower boiling point (-18.4 oC) because it is a metallic compound. In metallic compounds, the atoms are held together by a network of delocalized electrons, which are not as tightly bound as the electrons in covalent bonds. This means that the intermolecular forces in metallic compounds are generally weaker, which leads to lower boiling points.

Overall, the variation in the boiling points of NH3, PH3, AsH3 and SbH3 can be explained by the different types and strengths of the intermolecular forces that are present in these substances.

Learn more about  boiling point, here https://brainly.com/question/2153588

#SPJ4

Francium is an alkali metal with atomic number 87 is present in seventh period.

As we go down the group, the number of shells are added and the gap between nucleus and electrons in valence shell increases.

which means the electron in outer most shell, experiences more shielding.

Or we can say that electron in outer most shell experiences less attraction to the nucleus.

This means, the outer most valence electron is easy to remove in case of Francium than any other elements of group 1.

Also, Francium has the lowest electronegativity and with largest atomic radius.

So removal of its valence electron is easy making Francium as the most reactive metal.

And this is the reason why, the most reactive metal on the periodic table is francium.

To know more about Francium:

brainly.com/question/2290590

#SPJ4

The answers include the following;

This is referred to as a technique done in the laboratory where a solution of known concentration is used to determine the concentration of an unknown solution.

It involves the use of a burette, pipette etc in whic the stopcock is used to release one drop at a time from the titrator for an accurate result.

Read more about Titration here https://brainly.com/question/13307013

#SPJ1

If the electron's binding energy is low enough, light with a wavelength of 68 nm can remove one electron from the a specimen of potassium metal.

A negative charge subatomic particle known as an electron can either be free or attached to an atom (not bound). One of the three main types atomic particles within an atom is an e that is bonded to it; an other two include proton and neutrons.

An electron must always be oscillating at some frequency because it is a classical object with wave-like characteristics. An electron must be annihilated in order for its vibrational frequency to drop to zero.

Binding energy of electron = 176 × 10³ Kj/ mol or (1.76× 10⁶ j/mol)

h = (6.63×10⁻³⁴ J/s)

c = (3×10⁸ m/s)

The energy require per electron is

1.76 × 10⁶ j / 6.02× 10²³ = 2.92 × 10⁻¹⁸ J

E = hc / λ

λ = hc / E

λ = 6.63×10⁻³⁴ m².kg.s⁻¹ * 3×10⁸ m/s / 2.92 × 10⁻¹⁸ J

λ = 6.8 ×10⁻⁸ m

λ = 6.8 ×10⁻⁸ × 10⁹

λ = 68 nm

To know more about electron visit:

https://brainly.com/question/491265

#SPJ4