The oxygen atom for the formation of the water comes from molecular oxygen.
The non-metallic chemical element oxygen is found in Group 16 of the periodic table, generally known as the oxygen group (O). All living creatures require the colorless, tasteless, and odorless gas known as oxygen. When plants use it as a source of carbon and release the oxygen back into the environment, plants utilise the carbon dioxide that animals have taken up and converted it into.
Oxygen may react with almost every other element to form compounds in addition to reactions that remove elements from their combinations with one another. Combustions are the name for these reactions, which are typically accompanied by the creation of heat and light. The most important component is water.
To know more about molecular oxygen visit : https://brainly.com/question/11587330
#SPJ4
2.5.2 Test (CST): Computer-Scored Unit Test
Question 3 of 25
Which characteristic gives the most information about what kind of element
an atom is?
OA. The number of electrons
B. The number of neutrons
C. The atomic number
OD. The atomic mass
k
The number of positive charge units (protons) in the nucleus is defined as the atomic number, which is the single most significant property of an atom. Atomic numbers are typically represented by the symbol Z.
What are an atom and atomic number?A component of an element is an atom. A specific element only has one kind of atom per atom. Protons, neutrons, and electrons, which are subatomic particles, make up the remainder of an atom. Chemical reactions can result in the combination of elements to create molecules. The number assigned to a chemical element by its atomic number in the periodic system places the elements in ascending order of the number of protons in their nuclei.
The number of positive charge units (protons) in the nucleus is defined as the atomic number, which is the single most significant property of an atom. Atomic numbers are typically represented by the symbol Z.
To know more about the atom and atomic number, visit:
https://brainly.com/question/8834373
#SPJ1
if u have 100 ml of water in a foam cup or 100 ml of water in a can which variable gets manipulated
The variable that gets manipulated is Aluminium.
Hot water has more energy than cold water so the sugar dissolves faster in hot water than in cold water. When water is heated, the molecules gain energy and move faster. Because they move faster, they come into contact with the sugar more often dissolving it faster. I can do it. Changing the amount of water will affect the plant growth rate values.
Therefore, we know that the amount of water is the independent variable and the plant growth rate is the dependent variable. The energy from the hydrothermal molecules makes the solid more soluble. In hot water, molecules move more so there are more collisions between water molecules and solids.
Learn more about The variable here:- https://brainly.com/question/27894163
#SPJ1
Which of the following pairs of liquids are likely to be miscible? Check all that apply. Which of the following pairs of liquids are likely to be miscible?Check all that apply. C8H18 and C6H6 Na3PO4 , and H2O H2SO4 and H2O CS2 and CCl4
For miscible : Poler will be miscible in polar.
Non polar will miscible in non polar .
1) C8H18 and C6H6 ( Both are non polar , miscible)
2) H2SO4 and H2O ( Ionic and polar , miscible )
3) CS2 and CCl4 ( Both are non -polar , miscible )
4) Na3PO4 , and H2O ( Salt ionic and polar , miscible )
A liquid is a almost incompressible fluid that conforms to the form of its field however keeps a regular extent impartial of strain. As such, it's miles one of the 4 essential states of remember, and is the only country with a specific quantity but no constant shape.
The atoms in a liquid are loose to transport around, although they can't pass closer collectively or farther apart. This means a liquid flows and modifications shape to fill the space around it.
Learn more about Liquid here:-https://brainly.com/question/752663
#SPJ1
Carbon-22 has a half-life of 3 days. What is the rate of decay of Carbon-22?
Carbon has a half-life of 5,730 years.
The rate of deterioration, or pastime, of a sample of a radioactive substance, is lower within the wide variety of radioactive nuclei in line with unit time.
The decay rate is expressed as a percent. We convert it to decimal through surely reducing the percentage and dividing it by means of 100. Then calculate the decay element b = 1-r. for example, if the rate of deterioration is 25%, the exponential characteristic's decay price is zero.25 and the decay thing b = 1- 0.25 = 0. seventy-five.
The rate of nuclear decay is also measured in terms of half of-lives. The 1/2-lifestyles is the amount of time it takes for a given isotope to lose half of its radioactivity. If a radioisotope has a 1/2-existence of 14 days, half of of its atoms will have decayed within 14 days.
Learn more about the rate of decay here;-https://brainly.com/question/25537936
#SPJ1
the atomic mass of sulfur is 32.06u. how many atoms are present in exactly 2 mol of sulfur
The number of atoms in 2 moles of the sulfur is 1.204 * 10^24 atoms
How many moles are present?We know that atoms are contained in an element. The number of atoms that are contained in one mole of a substance is given by the Avogadro's number.
Now we know that one mole of sulfur is going to contain 32.06 g of sulfur. This is because this is the mass of one mole of the sulfur atoms that are present. 2 moles of sulfur would contain 64.12 g
Given this fact we can now say that;
32.06 g of sulfur contains 6.02 * 10^23 atoms'
64.12 g of sulfur will contain 64.12 g * 6.02 * 10^23/ 32.06 g
= 1.204 * 10^24 atoms
Learn more about atoms:https://brainly.com/question/1566330
#SPJ1
if the dissolution of borax in water is spontaneous, is the change in enthalpy positive or negative - or are both signs possible?
Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, the change in enthalpy will be negative.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Mathematically,
Enthalpy=mass of solution× specific heat capacity of solution ×Change in temperature.
Any reaction which is spontaneous, then the enthalpy related to this type of reaction is always negative that is reaction is always exothermic.
Therefore, the change in enthalpy will be negative.
To know more about enthalpy, here:
https://brainly.com/question/24170335
#SPJ1
When 0.1 mol of PCls (g) is heated at 78.5 °C in a 1.00 L container, the pressure at
equilibrium is 3.50 x 105 Nm2. Calculate the degree of dissociation of PCIs.
Based on the pressure of the gas in the 1.00 L container, the percentage dissociation of PCl₅ is 60%.
What is the equation of the dissociation of PCl₅?The equation of the dissociation of PCl₅ when heated is given below:
PCl₅ (s) ---> PCl₃ (g) + Cl₂ (g)
Based on the equation of the dissociation of PCl₅, 1 mole of PCl₅ decomposes to give 1 mole of PCl₃ gas and 1 mole of Cl₂ gas.
Hence, 1 mole of PCl₅ dissociates to give 2 moles of gas.
0.1 mole of PCl₅ will dissociate to give 0.1 * 2 moles of gas = 0.2 moles of gas.
At STP, the pressure of 0.2 moles of gas is calculated as follows:
PV = nRT
where;
P is pressure = ?V is volume = 1.00 Ln is the number of moles = 0.2R is molar gas constant = 0.082 L.atm/k.molT is temperature = (273 + 78.5) KP = nRT / V
P = 0.2 * 0.082 * 351.5/ 1
P = 5.76 atm or 5.84 * 10⁵ N/m²
Percentage dissociation of PCl₅ = (3.50 * 10⁵/5.84 * 10⁵) * 100%
Percentage dissociation of PCl₅ = 60%
Learn more about the pressure of a gas at: https://brainly.com/question/16686077
#SPJ1
A gas at 5.00 atm pressure was stored in a tank during the winter at 5.0 °C. During the summer, the temperature in the storage area reached 30.9 °C. What was the pressure in the gas tank then?
A gas at 5.00 atm pressure was stored in a tank during the winter at 5.0 °C. During the summer, the temperature in the storage area reached 30.9 °C. the pressure in the gas tank then was 5.43 atm
According to gay lussac law :
P1 / T1 = P2 / T2
P1 = 5 atm
P2 = ?
T1 = 273 + 5 = 278 K
T2 = 273 + 30.9 = 303.9 K
now, P1 / T1 = P2 / T2
5 / 278 = P2 / 303.9
P2 = 5.43 atm
Thus, A gas at 5.00 atm pressure was stored in a tank during the winter at 5.0 °C. During the summer, the temperature in the storage area reached 30.9 °C. the pressure in the gas tank then was 5.43 atm
To learn more about gay lussac law here
https://brainly.com/question/11387781
#SPJ1
When a piece of sodium metal is dropped into a calorimeter filled with water, hydrogen gas evolves. The temperature of the mixture rises because.
The evolution of hydrogen gas occurs when a piece of sodium metal is dropped into a calorimeter containing water because sodium loses electrons and is oxidized, whereas water is reduced.
Hydrogen gas is created when sodium metal reacts with water, and sodium hydroxide is also created. In this way, one electron is removed from the metal (Na), and an electron is added, turning water into hydrogen gas.
A calorimeter is a device that is used in calorimetry, which is the process of calculating the heat produced by chemical reactions, physical changes, and heat capacity. Among the most popular kinds are titration calorimeters, isothermal micro calorimeters, accelerated rate calorimeters, and differential scanning calorimeters.
Learn more about hydrogen here
https://brainly.com/question/28937951
#SPJ4
Explain how flame tests could be used to perhaps identify, which metal ions are present in an unknown solution.
An unknown metal is exposed to flame by chemists during a flame test. Based on the type of metal present in the substance, the flame will change color. Once the chemical is identified, the scientists can proceed.
Which metals can be identified by flame test?The simplest method for determining whether group 1 metal ions are present in the chemical is a flame test. There are several effective methods for other metals, but a flame test will give you a better idea of what to look for.
Chemists place an unidentified metal under a flame as part of a flame test. Depending on whatever metal is present in the substance, the flame will take on a variety of colors. Thus, the mystery material can be identified by the scientists.
Metals have observable characteristics that are particular to each one, much like all other elements, such as density, boiling temperature, melting point, and specific heat. These characteristics can be utilized to identify unknown metal samples since they are special.
To learn more about flame test refer to:
https://brainly.com/question/26873482
#SPJ1
When 0.1 mol of PCls (g) is heated at 78.5 °C in a 1.00 L container, the pressure at
equilibrium is 3.50 x 105 Nm2. Calculate the degree of dissociation of PCIs.
When 0.1 mol of PCls (g) is heated at 78.5°C in a 1.00 L container, the pressure at equilibrium is 3.50 x 10⁵ Nm² so the degree of dissociation of PCIs is 60%
Dissociation is the breaking up of a compound into simpler constituents that are usually capable of recombining under other conditions.
Here given data is
Temprature = 78.5 °C
Pressure = 3.50 x 10⁵ Nm²
We have to calculate the degree of dissociation of PCI₅ = ?
Then the equation of dissociation of PCl₅ when heated is given below
PCl₅ → PCl₃ + Cl₂
Based on the equation of the dissociation of PCl₅ the 1 mole of PCl₅ decompose to give 1 mole of PCl₃ gas and 1 mole of Cl₂ gas
Hence 1 mole of PCl₅ dissociates to give 2 mole of gas
So 0.1 mole of PCl₅ will dissociate to give 0.1×2moles of gas = 0.2 moles of gas
At STP the pressure of 0.2 mole of gas is calculated as follow
PV = nRT
Where P = pressure = ?
V = 1.00 L
n = number of moles = 0.2
R = molar gas constant = 0.082 L atm/kmol
T = temprature = (273 + 78.5)K
P = nRT
P = 0.2×0.082×351.5/1
P = 5.76 atm or 5.84×10⁵N/m²
Percentage dissociation of PCl₅ = (3.50×10⁵/5.84×10⁵)×100%
Percentage dissociation of PCl₅ = 60%
Know more about degree of dissociation
https://brainly.com/question/29376986
#SPJ1
HELP ASAP URGENT WILL GIVE BRAINIEST (CORRECT ANSWERS ONLY!!!!!) What mass of H2 forms when 32.25g Al reacts with excess hydrochloric acid? 2AI +6HCI > 2AIC3+3H2
AI: 26.98 g/mol
H2: 2.02 g/mol
[?]g H2
Answer: The correct answer (based on the ratio provided) is the mass of H₂ produced equals 3.51 g of H₂
Explanation:
The equation of the reaction:
2AI + 6HCI → 2AICI₃ + 3H₂
Based on the equation 2 * 27g of Al will produce 3 * 2g of H₂
As a result, 32.25g of Al will produce: 6/55 * 32.25g of H₂
The mass of H₂ produced is therefore 3.51g of H₂
Please remember to vote this as Brainliest if I earned it!
The following is a DNA nucleotide sequence. Write the sequence of nucleotides that would pair up with this sequence: GCA TCT CCC CGA
Answer: CGT AGA GGG GCT
Explanation:
Cytosine adds up with the G (forgot the name of it) and A connects with the G.
25.0 L of an ideal gas at 278 K and 4.11 atm are heated to 393 K with
a new pressure of.7.00 atm. What is the new volume (in L)?
The new volume (in L) is 12.2 L
What is Boyle's law Formula and Derivation?According to Boyle's law, a gas's pressure will change whenever its volume changes, even when its quantity and temperature remain constant.Information given:
Volume 1 = 15.0 L
Temperature 1 = 298 K ---------> Temperature 2 = 383 K
Pressure 1 = 3.36 Atm -----------> Pressure 2 = 5.308 Atm
Information they're asking: New Volume 2?
When it comes to ideal gas queries, there are numerous formulae. The combined gas law, which essentially combines all of the gas laws into a single equation, comes to mind as one example. It goes like this: P1V1 / T1 equals P2V2 / T2.We've decided to look for Volume #2, or the volume change that occurs when the temperature rises (as well as the noticeable change in pressure). In order to leave V2 alone on the right side of the equation, the subsequent step is algebraic. When we finish, the equation becomes: P1V1T2 / T1P2 = V2.Substituting it with numbers (Yay! we were provided Kelvins, that's always a plus), we get;
3.36 Atm * 15.0 L * 383 K = V2 = 12.2 L
298 K * 5.308 Atm
To Learn more About Boyle's law refer to :
brainly.com/question/1696010
#SPJ1
how is polarity designated in a molecule
Due to comparable differences in electronegativity of different elements, partial positive and negative charges developed, hence polarity designated in a molecule.
The terms "polar" and "nonpolar" normally seek advice from covalent bonds. To determine the polarity of a covalent bond the usage of a numerical manner, find the distinction among the electronegativity of the atoms; if the end result is between 0.4 and 1.7, then, generally, the bond is polar covalent.
When the atoms linked by way of a covalent bond are distinct, the bonding electrons are shared, however now not similar. rather, the bonding electrons are extra attracted to at least one atom than the alternative, giving upward thrust to a shift of electron density closer to that atom.
This unequal distribution of electrons is referred to as a polar covalent bond, characterized by means of a partial nice fee on one atom and a partial negative price on the other. The atom that attracts the electrons extra strongly acquires the partial poor fee and vice versa.
Learn more about polarity here:-https://brainly.com/question/545359
#SPJ1
Use Hess’s Law to calculate the enthalpy change for the reaction.
C2H4(g) + H2(g) → C2H6(g) ∆Hrxn = ?
Given:
C2H4(g) + 3O2(g) → 2CO2(g) + 2H2O(l) ∆Hrxn 1 = -1410.9kJ
2C2H6(g) + 7O2(g) → 4CO2(g) + 6H2O(l) ∆Hrxn 2 = -3119.4kJ
2H2(g) + O2(g) → 2H2O(l) ∆Hrxn 3 = -571.6kJ
Answer:
∆Hrxn 1 + ∆Hrxn 3 - ∆Hrxn 2 = ?
-1410.9kJ - 571.6kJ + 3119.4kJ = ?
-2801.1kJ
The reaction CO₂(g) + C(s) = 2 CO(g) has Kp = 5.78 at
1200 K.
a. Calculate the total pressure at equilibrium when 4.45 g of CO₂ is introduced into a 10.0-L container and heated to 1200 K in the presence of 2.00 g of graphite.
b. Repeat the calculation of part a in the presence of 0.50 g of graphite.
Hope this answer helps you a lot ✅✅
An equilibrium constant of acid-base chemistry that is greater than 1 is recovered from.
A high K value (higher than 1) denotes an equilibrium with more products than reactants, whereas a low K value (less than 1) denotes an equilibrium with more reactants than products.
The equilibrium constant's value reveals whether a reaction is beneficial or unfavorable. Favorable reactions have a Keq value greater than 1, which indicates that energy is liberated throughout the reaction and that the reactants have a higher energy than the products. A spontaneous cell response changes free energy in the negative. The equilibrium constant for these reactions is significantly greater than 1. For these reactions, the value of the standard cell potential is positive.
Learn more about equilibrium here-
https://brainly.com/question/2009610
#SPJ4
This organelle functions in cellular respiration and makes energy
O mitochondria
O lysosome
O endoplasmic reticulum
O Golgi apparatus
Answer:
mitochondria
Explanation:
mitochondria is an organelles that is used in cellular respiration and makesbenetgy
Which statement is true about synthesis reactions?
O They must have one or more reactants.
O They must have more than one product.
They must have two or more reactants
They must have two or more products.
A synthesis reaction has to do with one that they must have two or more reactants.
What is a synthesis reaction?In a synthesis reaction we would have the combination of two or more reactants but we are going to have a single product. The reactants that we have would somehow just combine and give us the product that we are looking for.
Thus, the idea of the synthesis reaction is that there would be a joining of the reactants. This already means that we must have more than one of the reactants so that we can have the species that would be joined in the reaction.
Learn more about synthesis reaction:https://brainly.com/question/16987748
#SPJ1
What is the freezing point (in degrees Celcius) of 3.27 kg of water if it contains 193.9 g of CaBr₂? The freezing point
depression constant for water is 1.86 °C/m and the molar mass of CaBr₂ is 199.89 g/mol.
The solution's freezing point is 1.65°C.
What is freezing point?The freezing point depression formula is: Adding a solute to the original solvent causes the freezing point to decrease.
ΔT = kf×m×i
Where m is the molality of the solution (Moles CaBr2 -solute- / kg water -solvent), Kf is the freezing point depression constant of the solvent (1.86°C/m), and I is the Van't Hoff factor.
Molality of the solution is:
moles CaBr₂ = 193.9g ₓ (1mol / 199.89g) = 0.97 moles
Molality is:
0.97 moles CaBr₂ / 3.27kg water = 0.296m
For CaBr2, the van't hoff factor indicates how many moles of solute are generated following the dissolution of one mole of solid solute:
CaBr₂(s) → Ca²⁺ + 2Br⁻
1 mole of solid solute yields 3 moles of ions, and the Van't Hoff factor is 3.
ΔT = kf×m×i
ΔT = 1.86°C/m×0.296m×3
ΔT = 1.651
Water loses 1.65°C of its freezing point. Water's 0°C freezing point means that
The solution's freezing point is 1.65°C.
To know more about freezing point visit:
https://brainly.com/question/17042177
#SPJ1
1. Up to this time , scientists had identified elements by determining the properties of elemental substances . Because the properties of elements differ from the properties of compounds that contain those elements , scientists had used a variety of methods , including the battery , to decompose compounds into elemental substances . How did the spectroscope change the way scientists looked for elements ?
The spectroscope has changed the way scientists looked for elements in that it allows for the identification of elements from compounds without a need to decompose the compounds.
What is a spectroscope?A spectroscope also known as a spectrometer is an instrument that produces and analyzes the spectra or absorption lines using visible light.
The spectrometer measures and interprets the electromagnetic spectra that result from the interaction between electromagnetic radiation and matter.
These measurements are obtained or determined from the wavelength or frequency of the radiation.
A spectroscope is used to analyze and study the elemental components of compounds without having to decompose the compounds into elemental substances.
Thus, spectroscopes have proved to be useful in the study of the properties of elements in compounds.
Compounds are formed when two or more elements are combined together.
Learn more about spectroscopes at: https://brainly.com/question/2114494
#SPJ1
4. A balloon has a volume of 6.5 L at a pressure of 106 kPa and a temperature of 19°C. If thevolume decreases to 3.6 L and the temperature rises to 27°C, what is the new pressure?
Answer:
1.95 atm or 197 kPa*
Explanation:
To find the new pressure, you need to use the Combined Gas Law:
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
In this equation, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the new pressure, volume, and temperature. Before using the equation, you need to:
(1) convert the pressure from kPa to atm (101.3 kPa = 1 atm)
(2) convert the temperatures from Celsius to Kelvin (°C + 273 = K)
You can then plug these values into the equation and solve for "P₂".
P₁ = 106 kPa / 101.3 = 1.05 atm P₂ = ? atm
V₁ = 6.5 L V₂ = 3.6 L
T₁ = 19°C + 273 = 292 K T₂ = 27°C + 273 = 300 K
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex] <----- Combined Gas Law
[tex]\frac{(1.05 atm)(6.5L)}{292K}=\frac{P_2(3.6L)}{300K}[/tex] <----- Insert values
[tex]0.0234=\frac{P_2(3.6L)}{300K}[/tex] <----- Simplify left side
[tex]7.01 = P_2(3.6L)[/tex] <----- Multiply both sides by 300
[tex]1.95 = P_2[/tex] <----- Divide both sides by 3.6
*1.95 atm x 101.3 = 197 kPa
197 kPa or 1.95 atm is a new pressure, you must apply the Combined Gas Law to determine the new pressure.
What is gas law?The starting pressure, volume, and temperature are denoted in this equation by "P1", "V1," and "T1," respectively. The new pressure, volume, and temperature are denoted by the letters "P2", "V2," and "T2". You must: before applying the equation:
(1) convert pressure to atm (101.3 kPa = 1 atm)
(2) Use the formula °C + 273 to convert temperatures from Celsius to Kelvin.
After that, you may solve for "P2" by plugging these numbers into the equation.
P1 = 101.3 kPa / 106 kPa = 1.05 atm P₂ = ? atm
V₁ = 6.5 L V₂ = 3.6 L
T₁ = 19°C + 273 = 292 K T₂ = 27°C + 273 = 300 K
Therefore, 1.95 atm X 101.3 = 197 kPa
Learn more about, pressure, here:
https://brainly.com/question/22624517
#SPJ1
Silver ion can be used to gravimetrically analyze Br- ion. Calculate the gravimetric factor for Br- using silver bromide. Please show how to do so as well.
The gravimetric factor for Br- using silver bromide is 0.425.
What is the gravimetric factor?The gravimetric factor is an expression that is used to convert grams of a compound into grams of a single element.
It is expressed as a ratio of the formula weight (FW) of the substance that is being determined to that of a second substance that is weighed.
Gravimetric factor = formula mass of substance weight / formula mass of substance soughtFor example formula of silver bromide is AgBr and the formula mass of silver bromide is 188 g/mol
Formula mass of bromide ion = 80 g/mol
Gravimetric factor = 80/1188
Gravimetric factor = 0.425
Learn more about gravimetric factor at: https://brainly.com/question/2094735
#SPJ1
L
Apply Concepts
6. Look at the illustration. What causes
the phase change of water shown in
the illustration? How do you know?
Chapter 1,1anson 3 Check What are solids, liquids, and gases?
The phase change of water is water particle to evaporate forming water vapor
When water changes state in the water cycle and the total number of water particles remain the same and the changes of state include melting, sublimation, evaporation, freezing, condensation and deposition and heating the water in the first beaker causes the water particles to evaporate and forming water vapor and the particle are far apart and on a molecular level the intermolecular forces between the water molecule are decreasing and the heat is providing enough for the water molecule to overcome these attractive forces and all changes involve either an increase or decrease of intermolecular forces
Know more about phase change
https://brainly.com/question/2128466
#SPJ4
How many shells are there in the Bohr model of a hydrogen atom?
Answer:
Explanation:
When looking at the periodic table, the period (row) corresponds to the number of shells or PEL (principled energy level).
Hydrogen is in the first period and thus has one shell.
how many molecules in 12 grams of h20
There are 5.02 *10²² molecules in 12 grams of water.
What is a molecule?
This refers to two or more atoms joined by chemical bonds. egH₂0.
What is molecular weight?
This refers to the total weights of the individual atoms that comprise the molecule.
How to calculate number of molecules in a chemical compound.
.Calculate the molecular weight of the substance for one mole.
. Divide the molar mass value by the molecular mass.
. Finally, multiply by the Avogadro constant.
Recall,
1 mole of a subtance= 6.022×10²³ atoms(Avogadro's Law)
Hence calculating the number of molecules in 12g of H₂0 we have:
1 mole of H₂0=(1*2) +(8*2)
18g
18g of H₂0 contains 6.022×10²³ atoms
Then 12g of H₂0 contains:
number of molecules=Number of atoms /mass of H₂0
=6.022×10²³/12
=5.02×10²²
Learn more about Molecules on
https://brainly.com/question/21297302
#SPJ1
Which of the following diagrams is the correct electron dot diagram for Al
The correct electron dot diagram for Al is Al with three dots. The option A is the correct option.
What is aluminum atom?Aluminum is one of the element of the periodic table. It belongs to 13th group. The atomic number of aluminum is 13 and mass number is 26. The electronic configuration of aluminum is 1s1 2s2 2p6 3s2 3p1.
Since there are three electron in the lass shell. Therefore to obtain stable electronic configuration aluminium lose three electron. Since, last electronic configuration is 3 p. Thus, it belongs to p block and 3rd period.
The number of electron dot on an element is depend on the valancy of that particular atom. Let's learn with an example of Na. It has 11 as atomic number and have valancy 1. So, the dot present on Na symbol is one. In the same way, the aluminum has 3 valancy. So, the number of dots present is three.
Thus, we concluded that the correct electron dot diagram for Al is Al with three dots. The option A is the correct option.
learn more about electron dot diagram:
https://brainly.com/question/6947162
#SPJ13
What is the absorbance of a solution that absorbs 45.0% of
incident 500nm VIS radiation?
The absorbance of a solution that absorbs 45.0% of incident 500nm is equal to 0.26.
What is absorbance?Absorbance can be defined as the logarithm of the ratio of incident light to transmitted light through a sample. Absorbance may also be defined as the negative logarithm of one minus transmittance, as measured on a uniform sample.
If I₀ is the intensity of the incident light and 'I' is the intensity of the light detected after traveling a distance 'd', the fraction transmitted T, is given by:
[tex]A = log\frac{I_o}{I}[/tex]
Given, the light absorbed by the solution = 45%
The radiation incident on the solution, I₀ = 100 %
The radiation transmitted by the solution = 100 - 45 = 55%
The absorbance of the solution is given by: A = log (I₀/I)
A = log (100/55)
A = 0.26
Learn more about Absorbance, here:
https://brainly.com/question/28769428
#SPJ1
What is the frequency of an orange light with a wavelength of 483nm
Answer: frequency= speed of light * wavelength
1.44799757×10*11
Explanation:
