From the unbalanced reaction: B2H6 + O2 ---> HBO2 + H2O


How many grams of O2 (32g/mol) will be needed to burn 36.1 g of B2H6 (Molar mass = 27.67g/mol)? ______g


Include the correct number of significant figures in your final answer

Answer:

Monosodium Glutamate (MSG) is a chemical which is used in agricultural of food chemistry.

Explanation:

Monosodium Glutamate (MSG) is a chemical that is used in types of different  food as food additives. The functional group that is present in Glutamate are carboxylic acid and amine. This chemical is used in different types of foods which is responsible for enhancing the taste of the food. Monosodium Glutamate is safe if it is used in moderate dose but adversely affected when it is used in large amount.

Answer:

66.0 atm

Explanation:

We can calculate the osmotic pressure (π) using the following expression.

[tex]\pi = i \times M \times R \times T[/tex]

where,

Step 1: Calculate i

Sodium sulfate completely dissociates according to the following equation.

Na₂SO₄ ⇒ 2 Na⁺ + SO₄²⁻

Since it produces 3 ions, i = 3.

Step 2: Calculate M

We can calculate the molarity of Na₂SO₄ using the following expression.

[tex]M = \frac{mass\ of\ solute }{molar\ mass\ of\ solute\ \times liters\ of\ solution} = \frac{65.0g}{142.04g/mol \times 0.500L} =0.915M[/tex]

Step 3: Calculate T

We will use the following expression.

K = °C + 273.15

K = 20°C + 273.15 = 293 K

Step 4: Calculate π

[tex]\pi = 3 \times 0.915M \times \frac{0.08206atm.L}{mol.K} \times 293K =66.0 atm[/tex]

Answer:10 grams of CO2

Explanation:

Yeild= exp. yeild÷ thoretical yeild × 100

Yeild= 73.3÷73.4 × 100

Yeild= 0.1 ×100

Yeild= 10

Answer:

No additional particle was produced during the decay.

Explanation:

The equation of decay is given as;

¹⁰₆C  + ⁰₋₁ e → ¹⁰₅B + x

To identify x, we have to calculate its atomic and mass number.

In the reactants side;

Atomic Number = 6 + (-1) = 5

Mass number = 10 + 0 = 10

In the products side;

Atomic Number = 5 + x

Mass Number = 10 + x

Generally, reactant = product

Atomic Number;

5 = 5 + x

x = 5 - 5 = 0

Mass Number;

10 = 10 + x

x = 10 - 10 = 0

This means no additional particle was produced during the decay.

Answer:

Ba(OH)2(aq)+H2SO4(aq) gives us 2BaH+H2O

Explanation:

Answer:

In 0 group of the periodic table

Explanation:

So they will not react with other atoms because they have a full outer shell of electrons and an overall charge of 0.

Hope it helps.

Answer:

they would repel

Explanation:

unlike charges attract while like ones repel.

Answer:

D) it is the heat required to change a gram of substance from a liquid to a gas

Explanation:

idk i think its correct but if its wrong just let me know

Answer:

[tex]0.745~M[/tex]

Explanation:

In this case, we have a dilution problem. So, we have to use the dilution equation:

[tex]C_1*V_1=C_2*V_2[/tex]

Now, we have to identify the variables:

[tex]C_1~=~14.9~M[/tex]

[tex]V_1~=~25~mL[/tex]

[tex]C_2~=~?[/tex]

[tex]V_2~=~0.5~L[/tex]

Now, we have different units for the volume, so we have to do the conversion:

[tex]0.5~L\frac{1000~mL}{1~L}=~500~mL[/tex]

Now we can plug the values into the equation:

[tex]C_2=\frac{14.9~M*25~mL}{500~mL}=0.745~M[/tex]

I hope it helps!

Answer:

3.011x10^24 molecules

Explanation:

1 mole=6.022x10^23 molecules

5 moles*6.022x10^23 molecules/mole=3.011x10^24 molecules

Answer:

Kc = [Pb²⁺]³.[PO₄³⁻]²

Explanation:

Let's consider the following reaction at equilibrium.

Pb₃(PO₄)₂(s) ⇄ 3 Pb²⁺(aq) + 2 PO₄³⁻(aq)

The concentration equilibrium constant is the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. It only includes gases and aqueous species.

Kc = [Pb²⁺]³.[PO₄³⁻]²

This equilibrium constant is known as the solubility product of Pb₃(PO₄)₂.

Answer:

1.  2.28 g

2. 0.82 g

3. 1.35 g

4. 36 %

5. 59 %

6. 2.17 g

7. 95 %

Explanation:

Hello,

1. In this case, the mass of the unknown mixture is obtained by subtracting the mass of the dish plus sample and the mass of the dish:

m = 26.57 g- 24.29 g = 2.28 g

2. In this case, the mass of the NaCl recovered is obtained by subtracting the mass of the dish plus NaCl and the mass of the dish:

m = 68.66 g- 67.84 g = 0.82 g

3. In this case, the mass of the sand recovered is obtained by subtracting the mass of the filter paper plus sand and the mass of the filter paper:

m = 37.69 g- 36.34 g = 1.35 g

4. The percentage of NaCl is computed by considering its mass and the mass of the unknown mixture:

% NaCl = 0.82 g / 2.28 g * 100 % = 36 %

5. The percentage of sand is computed by considering its mass and the mass of the unknown mixture:

% sand = 1.35 g / 2.28 g * 100 % = 59 %

6. Here,we have to add the mass of NaCl and sand:

m = 0.82 g + 1.35 g = 2.17 g

7. Finally, the percent recovery is obtained by diving the total recovered mass by the total obtained mass of the mixture:

% recovery = 2.17 g / 2.28 g * 100 % = 95 %

Best regards.

Answer:

B) It can have different compositions, but it has a set of characteristics that does not change.

Explanation:

On e d g e n u i t y

I believe the answer is d lmk if  im  wrong or right

Answer: Recharge

Explanation:

To solve this we must be knowing each and every concept related to groundwater recharge. Therefore, the transfer of surface water into the ground to become groundwater is known as groundwater recharge.

The water that is added to the aquifer and through unsaturated zone after percolation (or infiltration) following any storm rainfall event is known as groundwater recharge.

In the natural world, rivers, lakes, streams, rain, and snowmelt all contribute to groundwater recharge. Other surface water trickles and through soil, eventually connecting with a source of water underneath the surface, while other surface water has evaporated or enters another watershed.

Therefore, the transfer of surface water into the ground to become groundwater is known as groundwater recharge.

To know more about groundwater recharge, here:

https://brainly.com/question/29450929

#SPJ5

Answer:

At equilibrium the rate of the forward reaction is equal to the rate of the backward reaction.

When the product of a reaction at equilibrium is increased the equilibrium will shift left or to the reactant side. As a result the excess product will get converted to reactant. This is in accordance to Le Chatelier's principle.

Le Chatelier's principle states that when a system is subjected to stress the equilibrium will shift in a direction to minimize effect of the stress.

Thus the products added to the system at equilibrium will make the equilibrium shift to the reactant side, the rate of the reverse or backward reaction will increase.

Explanation:

Hope This Helps Amigo!

Answer:

The answer is 5.

Answer:

327.89g/mol

Explanation:

Step 1:

The following data were obtained from the question:

Van 't Hoff factor (i) = 1 (since the molecule is non-electrolyte)

Temperature (T) = 25°C = 25°C + 273 = 298K

Gas constant (R) = 0.0821 atm.L/Kmol

Mass of molecule = 241mg

Volume of water = 250mL

Molarity (M) =?

Osmotic pressure (Π) = 0.072 atm

Step 2:

Determination of the molarity of the molecule.

This can be obtained as follow:

Π = iMRT

0.072 = 1 x M x 0.0821 x 298

Divide both side by 0.0821 x 298

M = 0.072 / (0.0821 x 298)

M = 2.94×10¯³ mol/L

Step 3:

Determination of the number of mole of the molecule. This can be obtained as follow:

Molarity = 2.94×10¯³ mol/L

Volume of water = 250mL = 250/1000 = 0.25L

Mole of molecule =..?

Molarity = mole /Volume

2.94×10¯³ = mole / 0.25

Cross multiply

Mole of molecule = 2.94×10¯³ x 0.25

Mole of molecule = 7.35×10¯⁴ mole.

Step 4:

Determination of the molar mass of the molecule.

Mole of molecule = 7.35×10¯⁴ mole.

Mass of molecule = 241mg = 241×10¯³g

Molar mass of molecule =..?

Mole = Mass /Molar Mass

7.35×10¯⁴ = 241×10¯³/ Molar Mass

Cross multiply

7.35×10¯⁴ x molar mass = 241×10¯³

Divide both side by 7.35×10¯⁴

Molar Mass = 241×10¯³/7.35×10¯⁴

Molar Mass = 327.89g/mol

Therefore, the molar mass of the molecule is 327.89g/mol

Answer:

Explanation:

Boiling.

Use water filter

Use Ultraviolet Light.

Use chlorine drops

I would recomade boiling as the main

because its the easiest and cheapest Or water filter if you have one

Answer:

1. H4C-NH-CH3

2. H3C-NH-C-CH3

H2C-CH3

1 +

H3C-CH2-N-CH3

CH3

N

3. H

4.

.

.

.

.

.

.

Answer:

THE SPECIFIC HEAT OF THE ALLOY IS 0.9765 J/g K

Explanation:

Mass of alloy = 33 g

Initial temperature of alloy = 93°C

Mass of water = 50 g

Initail temp. of water = 22 °C

Heat capacity of calorimeter = 9.20 J/K

Final temp. = 31.10 °C

specific heat of alloy = unknown

specific heat capacity of water = 4.2 J/g K

Heat = mass * specific heat * change in temperature = m c ΔT

Heat = heat capcity * chage in temperature = Δ H * ΔT

In calorimetry;

Heat lost by the alloy = Heat gained by water + Heat of the calorimeter

                     mc ΔT = mcΔT + Heat capacity * ΔT

33 * C * ( 93 - 31.10) = 50 * 4.2 * ( 31.10 -22) + 9.20 * ( 31.10 -22)

33 * C * 61.9 = 50 * 4.2 * 9.1 + 9.20 * 9.1

2042.7 C = 1911 + 83,72

C = 1911 + 83.72 / 2042.7

C = 1994.72 /2042.7

C =0.9765 J/g K

The specific heat of the alloy is 0.9765 J/ g K

Complete Question

The complete question is shown on the first uploaded image

Answer:

The correct option is  ammonia

Explanation:

The mixture contains two base compound which are

           ammonia,

and     diethylamine

Now the addition of HCl which is  a strong acid in step 1  will cause the protonation of  the  two base compound , which makes the soluble hence resulting in them being extracted to the aqueous layer as represented in below

       [tex]NH_3 + HCl\to NH_4 ^{+} + Cl^-[/tex]

and

     [tex](CH 3CH 2) 2NH + HCl \to (CH 3CH 2) 2NH_2^{+} + Cl[/tex]

Answer:

(D.)

The core of the pyruvate dehydrogenase complex is made up of eight catalytic trimers that make up the E2 component.

Explanation:

Eight trimers assemble as a hollow truncated cube, which forms the core of the multi-enzyme complex, known as the E2 complex in human pyruvate dehydrogenase complex.

Answer:

A. ethane > butane > decane > dodecane > heptadecane

Explanation:

In fractionating column, crude oil is separated by means of fractional distillation due to the wide range of boiling point of the crude products such as ethane, propane, butane pentane etc.

The product with the least weight rises to top height while the product with highest weight will move down.

For the given hydrocarbon products, the ranking according to their molecular weight, starting with the lighter product to heavier product is

ethane (C2), butane (C4), decane(C10), dodecane (C12), heptadecane(C17).

Thus, the correct ranking, starting with the product that will rise highest is ethane > butane > decane > dodecane > heptadecane

Answer:

Explanation:

The fluid containing virus is harvested from the eggs. For inactivated influenza vaccines (i.e., flu shots), the vaccine viruses are then inactivated (killed), and the virus antigen is purified. The manufacturing process continues with quality testing, filling and distribution.

Answer:

[tex]m=14,105.71 g Fe[/tex]

Explanation:

Hello,

In this case, the first step is to compute the volume of the block considering the length, height and width:

[tex]V=L \times W \times H =12.5 in\times 3.50 in \times 2.50 in =109.375 in^3[/tex]

Then, we compute the volume in cubic centimetres:

[tex]V=109.375in^3\times \frac{16.3871 cm^3}{1in^3} =1792.34cm^3[/tex]

Finally, as the density is given by:

[tex]\rho =\frac{m}{V}[/tex]

We solve for the mass:

[tex]m=\rho \times V= 7.87\frac{g}{cm^3} \times 1792.34 cm^3\\\\m=14,105.71 g Fe[/tex]

Best regards.

Answer:

THE HEAT REQUIRED TO CHANGE 2 KG OF ETHANOL FROM 26 °C TO THE BOILING POINT AND TO VAPOR AT THAT TEMPERATURE IS 1965.175 KJ.

Explanation:

Boiling point of ethanol = 78.29 °C = 78.29 + 273 K = 351.29 K

Mass = 2 kg = 2000 g

Final temp. = 26.0 °C = 26 + 273 K= 299 K

Change in temperature = (78.29 - 26) °C = 52.29 °C

1. Heat required to raise the temperature from 26 °C to the boiling point?

Heat = mass * specific heat * change in temperature

Heat = 2000 * 2.44 * 52.29

Heat = 255 175.2 J

2. Heat required to change the liquid to vapor at that temperature?

Heat = mass * enthalphy of vaporization

Heat = 2000 * 855

Heat =1 710000 J

The total heat required to raise the temperature of 2 kg of ethanol from 26 °C to the boiling point and then to change the liquid to vapor at that temperature will be:

Heat = mcT + m Lv

Heat = 255 175.2 J + 1710000 J

Heat = 1965175.2 J

Heat = 1965.175 kJ of heat.

Answer:

The answer is "Option b"

Explanation:

In this question first we calculates the moles in F-, HF, and in HCL, which can be defined as follows:

Formula:

[tex]\ Number \ of \ moles\ = \ Molarity \times \ Volume \ in \ litter[/tex]

[tex]\ moles \ in\ F- = 0.100 \ M \times 0.0250 L\\\\[/tex]

                     [tex]=\ 0.0025 \ moles[/tex]

[tex]\ moles \ in \ HF \ = 0.126M \times 0.0250 L[/tex]

                       [tex]= 0.00315 \ moles[/tex]

[tex]\ moles \ in \ HCl = 0.0100M \times 0.00500 L[/tex]

                       [tex]= 0.00005 \ moles[/tex]

[tex]\ Reaction: \\\\F - + H+ \rightarrow HF[/tex]

[tex]\Rightarrow \ moles \ in \ F- = 0.0025 \\\\\Rightarrow \ moles \ in \ H+ = 0.00005 \\\\ \Rightarrow \ moles \ in \ HF = 0.00315\\\\ \ total \ moles = 0.00250 -0.0000500 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.00315 + 0.00005\\\\\ total \ moles =0.00245 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.00245[/tex]

[tex]\ total \ volume \ in \ the \ solution = \ V = \ 0.0300 L\\\\ after \ addition \ of \ HCl \ the \ concentration \ of \ F- \ = 0.00245\ moles \div V[/tex]

                                                                                [tex]=\frac{ 0.00245 \ moles }{0.0300L}\\\\= \frac{245 \times 10^4}{300 \times 10^5} \\\\= \frac{245}{3000} \\\\ = 0.0817 M[/tex]

Answer:

  98.9%

Explanation:

2 moles of I₂ are required for each mole of Mg, so the reaction is limited by the available I₂. The 3.56 moles of I₂ should react with 1.78 moles of Mg to produce 1.78 moles of MgI₂. Instead, we get 1.76 moles of MgI₂.

The yield is 1.76/1.78 × 100% ≈ 98.876%

The yield is 98.9% of the quantity expected based on available reactants.

Answer:

1.7 moles of ethanol would be needed.

Explanation:

* Calculate the moles of ethanol needed to produce 1.70mol of water. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.

First off, we have to state the equation for the reaction.

So we know that;

ethanol + oxygen → acetic acid + water

This leads us to;

C2H5OH + O2 → CH3COOH + H2O

1                    1         1                    1

To obtain the moles of ethanol needed to produce 1.70mol of water, we look at the stoichiometry of the reaction above.

1 mol of ethanol produces 1 mole of water

x mol of thanol would produce 1.7 mol of water

Thus we have;

1 = 1

x = 1.7

x = 1.7 moles of ethanol would be needed.