Answer:
C
Explanation:
four chiral centers
How many moles of zinc, Zn, are in 1.31×1024 Zn atoms?
Answer:
=7.89013× 10^47 moles of zinc
Explanation:
1 atom contains 6.023×10^23 moles.
1.31×10^24 atoms of zinc contain6.023×10^24×1.31×10^.24
If aluminum has a density of 2.7 g/cm³, what is the volume of 2.7 grams of aluminum?
Answer:
Solution Density of aluminium = 2.7 g/Cm 3 In kg/ m 3 = 27 × 1000 10 =2700 kg/ m 3
Explanation:
Not much of one
NH4Cl + AgNO3 → AgCl + NH4NO3
How would you draw the ionic compound Beryllium Arsenide lewis structure?
Answer:
[Na]^+ [Cl]^-
Explanation:
Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]
Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)
So the lewis structure would be:
[Na]^+ for sodium
and
[Cl]^- for chlorine
Sodium chloride:
[Na]^+ [Cl]^-
Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.
PLEASE HELP ASASP!!!!!!!
Answer:
B
Explanation:
I took the test
Approximately 50% of our bone is chemically calcium phosphate, Ca3(PO4)2
If an adult has 12 kg of bone, calculate the mass of calcium is present
Hydrogen peroxide is a liquid that decomposes to form oxygen gas and
water. The occasional bubble you might see in a beaker that contains
hydrogen peroxide is evidence of this reaction. But if a small amount of
manganese oxide powder is added to the beaker, many small bubbles start
forming in the liquid. What part does the manganese oxide play in this
reaction?
A. It is a catalyst that increases the rate of the reaction.
B. It is a substance that supplies extra energy for the reaction.
C. Its addition to the liquid makes molecules of hydrogen peroxide
move faster.
D. It is a reactant that is necessary for the reaction to begin.
SUBMIT
A team of scientists altered the DNA of E. coli bacteria. The bacteria thus developed had the ability to generate insulin exactly identical to the human insulin molecule. What could be the likely impact of this biotechnology on the individual and the society?
The medical costs for insulin-dependent patients would rise.
Large-scale insulin could be produced in relatively lesser time.
The price of insulin available from sources other than bacteria may fall.
The patients who take insulin may become infected with E. coli bacteria.
Answer:
Large-scale insulin could be produced in relatively lesser time.
Explanation:
We already sort of do this where we infect the bacteria with a plasmid containing our insulin gene and it causes them to produce insulin. Since the question is saying that we edited their DNA directly, now these bacteria don't need to be infected with plasmid b/c now they can just pass these genes onto their offspring.
This will allow us to make TONS of insulin cuz bacteria are crazy good at making stuff and growing.
Classify each of the following substances as a compound or element.
a. Gold _____________
b. Ethanol _____________
c. Sugar _____________
d. Sulfur _____________
e. Hydrogen gas______
f. Carbon dioxide_______
Answer:
A. Element
B. Compound
C. Compound
D. Element
E. Compound
F. Compound
Explanation:
Elements are what is already on the periodic table and compounds are the substances created when they are combined.
QUESTION 1
What happens when water droplets are on a glass surface?
O They scatter around, maintaining their spherical shapes.
They spread and stick to the surface.
They join to form on gigantic sphere.
O They evaporate.
Answer:
It appears all of them are correct
Smaller drops will scatter around while maintaining their shape
Larger drop will spread stick to the surface.
and drops close together will join to form on gigantic sphere(but not perfect sphere)
and if they are in the sun, they'll eventually evaporate
Explanation:
What type of reaction is illustrated?
Answer:
Synthesis
Explanation:
Carbon + Difluorine = Tetrafluoromethane.
1 mole of Carbon [C] reacts with 2 moles of Difluorine [F2] to form 1 mole of Tetrafluoromethane [CF4]
Number of molecules in .99 mol C6H5NO2
Answer:
5.96 * 10^23 molecules
Explanation:
Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer. The question is asking for the number of molecules. That means you do not break down each molecule to find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.
1 mol contains 6.01 * 10^23 molecules
0.99 mol contains x
1/0.99 = 6.02 * 10^23 / x molecules
x = 0.99 * 6.02 * 10^23
x = 5.96 * 10^23
10. Two primary sites for the
polio virus replication?
Answer:
the cytoplasm
protein 3b more commonly called vpg
light frequency 1.40x10^15 Hz strike a surface causing photoelectrons to leave with a KE of 1.05 eV what is the work function in eV
Answer:
The Work Function is 4.74eV.
Explanation:
The photoelectric effect is a phenomenon in which a beam of light is projected towards a metal plate and this leads to the ejection of electrons from the metal. The minimum amount of energy required for this ejection of electrons is known as the work function. When the energy of the light beam is less than the work function, then the electrons are not emitted.
The photoelectric effect is represented by the equation:
E = φ + KE where
E = energy of the incident photons
KE = kinetic energy of photoelectrons
φ = Work function of the metal
This can also be written in terms of frequency as:
h = h₀ + [tex]\frac{1}{2}[/tex] mv²
= frequency of the incident light beam
₀ = frequency of the photoelectrons
m = mass of the electron
v = velocity of the electron
h = Plank's constant 6.623 x 10⁻³⁴Js
Conversion factor: 1eV = 1.602 x 10⁻¹⁹ J
So, 1.05eV = 1.682 10⁻¹⁹ J
Using the formulas,
(6.623 x 10⁻³⁴Js)(1.40x10¹⁵ s⁻¹) = φ + 1.682 x 10⁻¹⁹ J
(9.272 x 10⁻¹⁹) - (1.682 x 10⁻¹⁹) = φ
φ = 7.590 x 10⁻¹⁹ J = 4.74 eV
Learn more about work function here:
https://brainly.com/question/9757301
#SPJ2
The properties of an element depend on the electron structure within its atoms. The electrons are arranged in different
orbitals, at different energy levels and sublevels. Match each sublevel to the maximum number of electrons it can
accommodate?
S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
What are orbitals?The probability of finding an electron around the nucleus.
The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.
The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.
The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.
The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.
Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
Learn more about the orbitals here:
https://brainly.com/question/18914648
#SPJ1
1. 50.0 g of an unknown metal was heated to 95.0 °C and added to 45.0 g of water at 25.0 °C
in a calorimeter. Once the system reached equilibrium the final temperature was 28.5 °C.
Calculate the specific heat capacity of the metal with correct units.
2. 60.0 g of nickel heated to 100.0 °C was added to 55.0 g of water at 25.0 °C inside a
calorimeter and the system was allowed to reach equilibrium. What would be the final
temperature of the metal and water? (specific heat of Ni = 0.44 J/g °C)
.
3. One challenge during calorimetry is to minimize the heat lost to the environment during
the experiment. Suggest how you would minimize the heat loss during the experiment (read
the steps of the experiment before you answer the question)
Answer
Q = mcΔT
Qwater = -Qmetal
(100 g)(4.18 J/g°C)(25°C - 20°C) = -(50 g)c(25°C - 90.0°C)
2090 J = (3250 g °C)c
c = 0.643 J/g °C
Consider the following reaction.
2Fe2O3(s)+3C(s)−→−heat4Fe(s)+3CO2(g)
Calculate the number of grams of Fe2O3 needed to react with 18.3 g C.
Answer:
162 g Fe₂O₃
Explanation:
To find the mass of Fe₂O₃, you need to (1) convert grams C to moles C (via molar mass from periodic table), then (2) convert moles C to moles Fe₂O₃ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles Fe₂O₃ to grams (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to reflect the given value.
Molar Mass (C): 12.011 g/mol
2 Fe₂O₃(s) + 3 C(s) ---> 4 Fe(s) + 3 CO₂(g)
Molar Mass (Fe₂O₃): 2(55.845 g/mol) + 3(15.998 g/mol)
Molar Mass (Fe₂O₃): 159.684 g/mol
18.3 g C 1 mole 2 moles Fe₂O₃ 159.684 g
-------------- x ---------------- x ------------------------- x ----------------- = 162 g Fe₂O₃
12.011 g 3 moles C 1 mole
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
If the earth were the size of an apple, which piece would best represent the amount of mass of the
atmosphere?
O the skin
O the meat
O the stem
O Oops..... I am sorry. I just ate the Pacific Ocean by mistake.
O a seed
Which of the following statements would correct one of the roles listed in the table?
O Glucose combines with water to form carbon dioxide,
OGlucose reacts with carbon dioxide during photosynthesis.
OOxygen is formed along with glucose during photosynthesis.
O Chlorophyll stores chemical energy needed for photosynthesis.
Answer:
a
Explanation:
glucose combined with water to form carbon dioxide
Answer:
Option C
Explanation:
Because during photosynthesis the reaction is as per following
CO_2+H_2O—»C_2H_12O_6+O_2Clearly
Glucose nd oxygen are formed
Identify bond types as either ionic, metallic or covalent
HCN
Fe
PbO
Si
Answer:
In ionic bond one element should be metal and next should be non metal. in covalent both element should be met Alice. if there valence electron is less than 4 than it is metal or more than 4 it is non metal.
Is XeCl4 a molecular compound?
Answer:
Hint for Naming XeCl4
We have two non-metals so this is a molecular (sometimes called covalent) compound.
How many grams of Fe(NO3)3 are present in a 20.0 mL sample of a 0.500 M solution?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre (1)
Where,
moles= given weight /by molecular weight
= w/241.8
Substituting values in equation 1
0.500= (w/241.8)/(20.0 /1000)
w=0.80g
Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
just need help with one question pls
Answer:
A large absorption at 2950 cm⁻¹ indicates that there is likely an sp³C-H functional group somewhere in the molecule. The "sp³" designation means that this is a single bond because these atoms have 4 orbitals available (s + p + p + p) for hybridizing, meaning only single bonds are possible.
HELP!!! LOTS OF POINTS AND I GIVE BRIANLEST NO FAKE ANSWERS
Given the following data for water:
Heat of fusion = 334 J/g
Heat of vaporization = 2,256 J/g
Specific heat of solid = 2.09 J/(g °C)
Specific heat of liquid = 4.184 J/(g °C)
Specific heat of gas = 1.84 J/(g °C)
Calculate how much energy is needed to change 50.0 grams of ice at −15.0 °C to liquid water at 50.0 °C. (3 points)
a
11,900 J
b
16,300 J
c
18,300 J
d
21,100 J
Answer:
18300 J
Explanation:
this is because the amount of energy can be changed
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O2(g) → 2SO3(g)
The percent yield would be 68.3%
Percent yieldThis is given as:
Percent yield = yield/theoretical yield x 100%
From the equation:
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
The mole ratio of the reactants is 2;1
Mole of 705 g SO2 = 705/64 = 11.02 moles
Mole of 80 g O2 = 80/32 = 2.5 moles
O2 is limiting.
Mole ratio of O2 and SO3 = 1:2
Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles
Mass of 5 moles SO3 = 5 x 80 = 400 grams
Percent yield = 400/586 = 68.3%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
TUTOR Determining Molecular Weight
What is the molecular weight of Cr3(ASO4)2? amu
The molecular weight of Cr3(AsO4)2 is 433.827.
Is molecular weight the same As molar mass?Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.
The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.
Learn more about molecular weight here https://brainly.com/question/26388921
#SPJ10
Questions 1. Why does the colour change not occur instantly? Questions 1 . Why does the colour change not occur instantly ?in the reaction between carbon dioxide and water
Answer:
which is an example of analog device
Due to the reaction's slow process of producing ppt or a change in color.
What is chemical reaction?Chemical reaction is defined as a procedure where one or more compounds, known as reactants, are changed into one or more new substances, known as products. Chemical reactions result in the formation of new chemical bonds between the atoms of the reactant molecules and the product particles' atoms. While there are the same number of atoms both before and after the chemical transition, there will be a change in the number of molecules.
When carbon dioxide and water combine, carbonic acid is created. The indicator changes color as a result of the water becoming slightly acidic due to carbon dioxide gas from exhaled breath. Dissolution causes a change in pressure. This suggests a physical alteration.
Thus, due to the reaction's slow process of producing ppt or a change in color.
To learn more about chemical reaction, refer to the link below:
https://brainly.com/question/29039149
#SPJ2
What is an open system?
A. A system that allows energy to move in and out but not mass
B. A system that allows energy and mass to move in and out of it
C. A system that allows mass to move in and out but not energy
OD. A system that does not allow energy or mass to move in or out of
it
Answer:
Open system :-
B. A system that allows energy and mass to move in and out of it.
Hope it helps!
What is the number of elements in 2Ca(OH)2
