Answer: The higher up an object an is the greater it’s gravitational potential energy. This is because a tree has more mass, so it needs to be given more gravitational potential energy to reach the same height. So a change in gravitational potential energy also depends on the mass of the object that is changing height
Explanation:
The gravitational potential energy (P.E) depends on the mass of the body and the height at which it travels, the two quantities will therefore dictate the work done on the object which is eventually the same as magnitude of the gravitational potential energy P.E.
It is assumed that gravitational pull acts toward the earth surface. The more the object move upward the more the work is done on the object to pull it down.
This work done is equal to the gravitational potential energy P.E which can be expressed as:
P.E = mgh
Where
m = mass of the body
g = gravitational field strength
h = height
We can have different masses of object at different heights, but gravitational field strength will always remain constant on earth.
Since the gravitational potential energy P.E depend on the mass of the body and the height at which it travels, the two quantities will therefore dictate the work done on the object which is eventually the same as magnitude of the gravitational potential energy P.E.
Learn more here: https://brainly.com/question/12337396
1. If the potassium hydrogen phthalate is not completely dry, how would it affect the reported molar concentration (molarity) of the NaOH solution in Part A? Explain.
The given question is incomplete. The complete question is as follows.
Pure potassiom hydrogen phthalate is used for standardization of the sodium hydroxide solution. Suppose that the potassium hydrogen phthalate is not completely dry. Will the reported molar concentration of the sodium hydroxide solution be too high, too low, or unaffected because of the moistness of the potassium hydrogen phthalate? Explain please.
Explanation:
When potassium hydrogen phthalate is not completely dry then it means there will be some water present in it. According to this, actual potassium hydrogen phthalate is diluted because of the presence of water molecules.
Hence, 1 mole of potassium hydrogen phthalate needs 1 mole of NaOH. And, at the equivalence point according to the concept of moles:
No. of moles of potassium hydrogen phthalate = No. of moles of NaOH
Also, the titration of potassium hydrogen phthalate concentration is less because of the presence of water then the number of moles of NaOH calculated will be less.
Thus, we can conclude that the molar concentration of the sodium hydroxide solution be too low.
why should we store Phosphorus in water
The reason we should store phosphorous in water is because it will ignite on contact with air
what will happen if we burn carbon monoxide In a closed room??
Answer:
the carbon monoxide will release blue fumes
Which equation represents fermentation? 1. C2H4 + H2O → CH3CH2OH 2. C2H4 + HCl → CH3CH2Cl 3. C6H12O6 → 2CH3CH2OH + 2CO2 4. 2CH3CHO → C3H5CHO + H2O
Answer:
3. C6H12O6 → 2CH3CH2OH + 2CO2
Explanation:
In fermentation a catabolic process occurs, where an organic substance (C6H12O6) is transformed into a simpler one (CH3CH2OH), through incomplete oxidation, which does not require oxygen. Sugars are transformed into ethyl alcohol and carbon dioxide.
The equation C₆H₁₂O₆ → 2CH₃CH₂OH + 2CO₂ represents fermentation
What is Fermentation ?Fermentation is an enzyme catalyzed, metabolic process whereby organisms convert starch or sugar to alcohol or an acid anaerobically releasing energy.
In this process a large molecule is broken down to a smaller molecule.
Among the Equations given Equation 3
C₆H₁₂O₆ → 2CH₃CH₂OH + 2CO₂
represents fermentation due to two reasons
It is the process of breaking down of SugarIt is breaking down of a large molecule into smaller molecules.To know more about Fermentation
https://brainly.com/question/13050729
#SPJ5
Action and reaction forces are described by newtons what law of motion
According to Newton, whenever objects A and B interact with each other, they exert forces upon each other. ... These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction.
There are total three laws of newtons, first law of newtons, second law of newton and third law of newton. Therefore, action and reaction forces are described by newtons third law of motion.
What is newton's third law?Newton's first law is also called law of inertia. An object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line unless acted on by an unbalanced force.
Third law states that for every action there is an equal and opposite reaction. Third law is applicable in many field of physics. The third law is applicable in the running of rockets. The third law is also used by swimmers during swimming in pool.
Therefore, action and reaction forces are described by newtons third law of motion.
To learn more about newton's law, here:
https://brainly.com/question/29768600
#SPJ6
Please help me with those questions please
Answer:
I know the answer to 5, i think
Explanation:
No, if both parents were left-handed, they would not have to be left-handedD. Answer the following questions in one word or a single sentence.
1. The metal foil used for wrapping food is made up of which metal
2. Which metal is used in thermometers?
3. Which non-metal is essential for breathing?
4. What is the alloy of iron, nickel and chromium known as?
5. Name the gas released when metals react with acids.
Answer:
According to the numbers 1-5;Aluminium,Mercury,Oxygen,Stainless Steel,Hydrogen gas.
Explanation:
Why is there a higher rate of skin cancer in Australia than in other parts of the world?
Answer:
Read below
Explanation:
Melanoma -- the most virulent form of skin cancer -- is caused by harmful ultraviolet light from the sun. Australia's proximity to Antarctica, where there is a hole in the ozone layer that filters out UV rays, also increases the risk.
Answer:
In Austrailia there is the hieghest rate of skin cancer because there is so much sunlight in Austrailia and there some people that have sensitive skin and they get skin cancer easily/ fast.
Explanation: This answer is correct because my teacher gave me this answer.
Hope this was helpful if not plz don't report my answer plz.
What is the function of these organelles?
endoplasmic reticulum:
Golgi body:
mitochondrion:
ribosome
Answer:
endoplasmic reticulum:
✔ helps in the production and movement of materials
Golgi body:
✔ packages and distributes materials in and out of cell
mitochondrion:
✔ supplies energy that the cell uses
ribosome:
✔ produces proteins for the cell
Explanation:
I did it on Edge
The function of endoplasmic reticulum is it helps in production and movement of a material.
What is endoplasmic reticulum?Endoplasmic reticulum is defined as a network of membranous tubules present within the cytoplasm of a eukaryotic cell.
It is one of the important organ of human body system which helps us in production and movement of material from one body part to another.
Golgi body helps in packaging and distribution of material in and out of cells.
Mitochondrion supply the energy to the cell. It is called as a power house of cell.
Ribosome helps to produce protein for the cell. It is called as protein factory.
Thus, the function of endoplasmic reticulum is it helps in production and movement of a material.
To learn more about endoplasmic reticulum, refer to the link below:
https://brainly.com/question/1311891
#SPJ2
Which of the following contribute(s) to most of the mass of an atom?
O A) Protons and electrons
B) Protons only
C) Protons and neutrons
OD) Neutrons only
Answer:
C) protons and neutrons
Explanation:
im pretty sure it is c
How many moles of gas are contained in a 60.0L cylinder at a pressure of 200.0 atm and a temperature of 25.0? A.(490.48 mol) B.(590.84 mol) C.(340.56 mol) D.(540.67 mol)
Answer: A. 490.48mol
Explanation:
Using the ideal gas equation; PV =nRT
where P = Presssure = 200 atm
V = Volume = 60L
n = Number of moles
R = Gas constant = 0.08206 L.atm/mol/K
T = Temperature = 25 °C + 273 = 298K
Make "n" the subject of the formular;
n = PV / RT
= 200 x 60 / 0.08206 x 298
= 490.73 mol, which is closest to option A. 490.48mol
Please answer number 5 ASAP
Answer: Hello mister i dont now your question
Explanation:
What is solid carbon dioxide oxide
Answer:
dry ice
Explanation:
hope this helps
:)
Answer:
Dry Ice is the common name for solid carbon dioxide (CO2). It gets this name because it does not melt into a liquid when heated; instead, it changes directly into a gas (a process known as sublimation).
Explanation:
In which kingdom do all organisms have cells that lack a cell wall?
fungsi
plants
animals
bacteria
Answer:
The answer is animals
Explanation:
Plants and fungi have a cell wall, and although most bacteria lack a cell wall, the question is asking in which kingdom do ALL organisms lack a cell wall. Hope this helps.
Answer:Bacteria
Explanation:
Step 3: Measure Solubility in Cold Water
10
0
-10
80
100 m
60
-40
20
Temperature of the water to the nearest degree:
ANSWER IS 2°C. !!!
Answer:
2 degrees celcius
Explanation:
2. Which change in oxidation number indicates
oxidation?
A) -1 to +2
C) -1 to - 2
B) +3 to +2
D) +2 to -3
Answer:
A)
Explanation:
Increasing of oxidation number shows that the process is oxidation(or losing of electrons).
-1 to +2, oxidation number is increased. This is an oxidation process.
-
Which is one way that topographic maps are different from other maps?
Answer:
The answer is A. Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation: Took the test and got 100% Edg. 2020
Answer:
A)Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation:
What do all pure substances have in common?
Answer:
All the pure substances are made up of atoms and group of atoms known as molecules. They also have weight, volume and colour white solids also have the shape and hardness or texture. Pure substances also have points at which they boil and solidify.
Answer:
Pure substances are defined as substances that are made of only one type of atom or molecule. The purity of a substance is the measure of the extent to which a given substance is pure.
Explanation:
A solution has a pH of 8.4. what is the H+ concentration of the solution?
A solution has a pH of 11. What is the H+ concentration of the solution? Is the solution an acid or base?
Your father goes to the store to buy cleaner to remove such deposits from your bathtub. He has a choice between a product containing lemon juice (H+ =10^-2.5M) and one containing vinegar (H+ = 10^ -3.3M) which product would you recommend he purchase and why?
[H+]=3.98x10^-9
[H+]=10^-pH=10^-8.4
[H+]=10^-11, base
[H+]=10^-pH=10^-11
A solution with a pH of more than 7 is basic.
Lemon juice because it is more acidic
pH of lemon juice: 2.5
pH of vinegar: 3.3
Since the pH of lemon juice is lower, it is more acidic and will be more effective at removing the basic deposits.
An aluminum can holds 350 mL of gas at 0 C and 1.0 atm. what is the new volume if the can is heated to 10 C and the pressure inside the can rises to 75 atm?
Answer:
Final volume of the gas is 4.837mL
Explanation:
Initial volume (V1) = 350mL = 0.35L
Initial temperature (T1) = 0°C = (0 + 273.15)k = 273.15k
Initial pressure (P1) = 1.0atm
Final volume (V2) = ?
Final temperature (T2) = 10°C = (10 + 273.15)k = 283.15K
Final pressure (P2) = 75atm
To solve this question, we'll have to use combined gas equation which is the combination of all gas law I.e Charle's laws, Boyle's law, Pressure law etc.
According to combined gas equation,
(P1 × V1) / T1 = (P2 × V2) / T2
Make V2 the subject of formula,
V2 = (P1 × V1 × T2) / (P2 × T1)
V2 = (1.0 × 0.35 × 283.15) / (75 × 273.15)
V2 = 99.1025 / 20,486.25
V2 = 0.004837L
V2 = 4.837mL
The final volume of the gas is 4.837mL
Answer:
4.84mL
Explanation:
Step 1:
Data obtained from the question. This include the following:
Initial volume (V1) = 350mL
Initial temperature (T1) = 0°C
Initial pressure (P1) = 1atm
Final temperature (T2) = 10°C
Final pressure (P2) = 75atm
Final volume (V2) =...?
Step 2:
Conversion of celsius temperature to Kelvin temperature.
This can be achieved by using the formula below:
T(K) = T (°C) + 273
Initial temperature (T1) = 0°C
Initial temperature (T1) = 0°C + 273 = 273K
Final temperature (T2) = 10°C
Final temperature (T2) = 10°C + 273 = 283K
Step 3:
Determination of the new volume.
The new volume can be obtained by using the general gas equation as follow:
P1V1/T1 = P2V2/T2
1 x 350/273 = 75 x V2/283
Cross multiply
273 x 75 x V2 = 1 x 350 x 283
Divide both side by 273 x 75
V2 = (1 x 350 x 283) / (273 x 75)
V2 = 4.84mL
Therefore, the new volume is 4.84mL
Energy is the ability to do work or produce heat.
True
False
Answer: true
Explanation: hope this helpes
Answer:
TRUE
Explanation:
power derived from the utilization of physical or chemical resources, especially to provide light and heat or to work machines.
Given the following chemical equation at equilibrium: H2(g) + I2(g) ↔2HI(g) + heat. If the temperature is raised, in what direction will the equilibrium shift?
Answer: The reaction will shift in left or backward direction.
Explanation:
Any change in the equilibrium is studied on the basis of Le-Chatelier's principle. This principle states that if there is any change in the variables of the reaction, the equilibrium will shift in the direction to minimize the effect.
For the given equation:
[tex]H_2(g)+I_2(g)\rightleftharpoons 2HI(g)+heat[/tex]
As the given reaction is exothermic as the heat is released in the reaction. When the temperature is raised , the reaction will shift in a direction where temperature is decreasing and that is the reverse reaction which is endothermic in nature.
Thus the reaction will shift in left or backward direction.
An investigation involves determining which metal is better for making pots that will cook food faster.
Where do you find the molar mass of an element
Answer:
Mass of a given chemical element or compound divided by the amount of substance.
(g/mol)
The mass of an object is measured in _____. liters meters degrees kilograms
An invasive fish species was accidentally introduced into a river. At first, it experienced a sudden surge in its population. Then it experienced a steady decline. Which statements give plausible reasons for this trend?
Answer:
Correct Option is Option A
A.)It became prey to certain organisms in the river.
Explanation:
CHECK COMPLETE QUESTION BELOW;
An invasive fish species was accidentally introduced into a river. At first, it experienced a sudden surge in its population. Then it experienced a steady decline. Which statements give plausible reasons for this trend?
A.It became prey to certain organisms in the river.
B.It lacked adaptations suitable for that particular ecosystem.
C.It had no predators in its new environment.
D.It had few organisms to compete with for resources.
Aquatic invasive species are species such as fish or invertebrate that is absorbed by new aquatic environment that are differ from their own natural environment.
When Aquatic invasive species found themselves in a new environment, at first they will experience a rapid increase in the number of their population this is because of the lack of natural predators in the new aquatic environment. As a result of this they bring about the alteration of food web structure, they take in charge of available food for the native species and compete with them. As a result of this competition involved there is a decrease in the population.
Therefore, the statements that gives plausible reasons for this trend is that became prey to certain organisms in the river.
Answer:
It became prey to certain organisms in the river.
It lacked adaptations suitable for that particular ecosystem.
Explanation:
Took the test on Edmentum
This is how osmium appears in the periodic table.A purple box has O s at the center and 76 above. Below it says osmium and below that 190.23.
Rounded to the nearest whole number, how many neutrons, on average, are in an atom of osmium?
a76
b114
c 190
d266
Answer:
114
Explanation:
plz make me brainiest
this is a multiple choice question. one of the answer from the option given is correct.Could you please help!!My sister needs help but she doesn't trust me '_' why am i even saying this, no one asked
6.What are the main
sources of water pollution?
a) Plastic, paper, metal
b) Snail in water
c) Agriculture, industry and community
C.
i cant explain why..................
Respiration occurs in the __________
Respiration occurs in the mitochondria
Answer:
mitochondria
Explanation:
Respiration happens in the cells of plants, animals and humans, mainly inside mitochondria.
An alkali is able to "cancel" out an acid. What is the other word for "cancelling out the acid"? * a) neutralise b) overcome c) nullify d) become acidic
Answer:
the correct answers is "neutralize"
Explanation:
When an acid is related to a base or also called an alkali and they reach a pH of 7, this acid will be neutralized or it will be canceled as the question says.
This happens so it reaches an equilibrium between both compounds, where the solution medium where these two compounds are is NEITHER ACID NOR BASIC, that is why it is called NEUTRAL medium.
Whenever you read that the pH of a solution is balanced, a neutralized acid, or a ph7 it means that the solution is NEUTRAL.
