Answer:
molar mass of C₃H ₈ = 44 g/mole
Explanation:
Computation of the amount of oxygen that reacts .
⇒ 75 - 12.5
⇒ 62.5 cm³
Computation of proportion of hydrocarbons
2 mole hydrocarbons 3n+1 oxygen
⇒ 3 n + 1 = [62.5 × 2] / 12.5
⇒ 3 n + 1 = 10
⇒ n = 3
So,
Formula of the hydrocarbon is C₃H ₈
Computation of molar mass of C₃H ₈
⇒ [12×3] + [1×8]
⇒ 44 g/mole
What volume of hydrogen will be produced at STP by the reaction of 67.3 g of tin with excess water according to the following reaction?
Answer:
Sn + 2H2O ==> Sn(OH)2 + 2H2
67.3 g Sn x 1 mol/119 g x 2 mol H2/mol Sn x 22.4 L/mole = answer in liters
Explanation:
Sn + 2H2O ==> Sn(OH)2 + 2H2
67.3 g Sn x 1 mol/119 g x 2 mol H2/mol Sn x 22.4 L/mole = answer in liters
The volume of hydrogen that will be produced from the reaction of 67.3 g of tin with excess water is 12.68 L
How to determine the mole of tin Mass of Sn = 67.3 gMolar mass of Sn = 119 g/mol Mole of Sn =?Mole = mass / molar mass
Mole of Sn = 67.3 / 119
Mole of Sn = 0.566 mole
How to determine the volume of H₂ producedSn + 2H₂O —> Sn(OH)₂ + H₂
From the balanced equation above,
1 mole of Sn reacted to produce 1 mole of H₂.
Therefore,
0.566 mole of Sn will also react to produce 0.566 mole of H₂
Recall
1 mole of H₂ = 22.4 L at STP
Therefore,
0.566 mole of H₂ = 0.566 × 22.4
0.566 mole of H₂ = 12.68 L
Thus, 12.68 L of H₂ were obtained from the reaction.
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ2
Name three group l bases and three group ll bases
Answer:
Group 1: LiOH, NaOH, KOH
Group 2: Ca(OH)2, Sr(OH)2, Ba(OH)2
Explanation:
Why do you subtract the mass of the solute from the total mass desired when making mass percent calculations?
We can represent the concentration of a material even when we don't know its molecular mass, since mass percentage and parts per million or a billion are just alternative ways of expressing the ratio of the mass of a solute to the mass of the solution.
What is molecular mass ?The mass of a certain molecule is its molecular mass, which is expressed in daltons. Because they contain various isotopes of an element, multiple molecules of the same substance can have distinct molecular weights.
More solute can be dissolved in a given volume of solution to increase concentration, since doing so increases the mass of the solute. By allowing some of the solvent to evaporate, which reduces the volume of the solution, concentration can be increased.
The amount of a solute that is present in a specific amount of solvent or solution is known as the concentration of a solution. Controlling the stoichiometry of reactants for solution reactions requires knowledge of the solute concentration.
Thus, We can represent the concentration of a material even when we don't know its molecular mass.
To learn more about molecular mass, follow the link;
https://brainly.com/question/1440369
#SPJ2
Questions
Warm air rising in the atmosphere is an example of heat being transferred by
o absorption
O conduction
O convection
O radiation
Answer:
the answer is convection
convection
how can the hemlock woolly upset natural ecosystem?
Answer:
The HWA attacks eastern hemlock trees in forests and ornamental hemlock trees found in our residential landscaping. It feeds on the hemlock trees' young twigs by sucking the sap, causing their buds to die and needles to dry out and drop from the plant prematurely i think
hope i helped!!
Need help please: How many mL of 0.150 Molarity CaBr2 solution must be used to react with 50 mL of 0.115 Molarity AgNO3?
CaBr2 + 2AgNO3 --> Ca(No3)2 + 2AgBr
Answer:
0.019 L or 19.1 mL
Explanation:
Given the equation of the reaction; we have:
CaBr2 + 2AgNO3 --> Ca(No3)2 + 2AgBr
We must first obtain the number of moles of AgNO3 reacted. This can be obtained from;
Concentration of AgNO3 reacted= 0.115 M
Volume of AgNO3 reacted= 50 ml
Since
Number of moles of AgNO3= concentration of AgNO3 × volume of AgNO3
Number of moles = 0.115 M × 50/1000 = 5.75 ×10^-3 moles
From the reaction equation;
2 moles of AgNO3 reacts with 1 mole of CaBr2
5.75 ×10^-3 moles of AgNO3 reacts with 5.75 ×10^-3 moles × 1 /2 = 2.875×10^-3 moles of CaBr2
Now;
Number of moles of CaBr2= concentration of CaBr2 × volume of CaBr2
Number of moles of CaBr2= 2.875×10^-3 moles
Volume of CaBr2= ????
Concentration of CaBr2= 0.150 M
Hence;
Volume of CaBr2= number of moles of CaBr2/ concentration of CaBr2
Volume of CaBr2= 2.875×10^-3 moles / 0.150
Volume of CaBr2= 0.019 L or 19.1 mL
Answer:
19 mL of CaBr₂ solution should be used to react with AgNO₃
Explanation:
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction) react:
AgNO₃: 2 molesCaBr₂: 1 mole50 ml of 0.115 M AgNO₃ react. Since molarity is the number of moles of solute per liter of solution, then you can do the following rule of three: if there are 0.115 moles of AgNO₃ in 1 L, in 0.05 L (being 1 L = 1000 mL, then 50 mL = 0.05 L How many moles are there?
[tex]moles of AgNO_{3}=\frac{0.05L*0.115 moles}{1 L}[/tex]
moles of AgNO₃=5.75*10⁻³
Now we can make a new rule of three to calculate the amount of moles necessary for CaBr₂ to react with moles of AgNO₂: if stoichiometry 2 moles of AgNO₃ react with 1 mole of CaBr₂, 5.75*10⁻³ moles of AgNO₃ with how many moles of CaBr₂ react ?
[tex]moles of CaBr_{2} =\frac{5.75*10^{-3}moles of AgNO_{3}*1 mole of CaBr_{2} }{2moles of AgNO_{3}}[/tex]
moles of CaBr₂=2.875*10⁻³ moles
Being 0.150 the molarity of the CaBr₂ compound, you can apply the following rule of three: if by definition of molarity 0.150 moles are in 1 L, 2.875 * 10⁻³ moles in how much volume is it present?
[tex]volume=\frac{2.875*10^{-3} moles*1L}{0.150 moles}[/tex]
volume=0.019 L
Being 1 L = 1000 mL, then 0.019 L = 19 mL
19 mL of CaBr₂ solution should be used to react with AgNO₃
Which of the following atoms has the largest atomic radius? Provide an explanation
a Hydrogen
b. Sodium
C Lithium
d Rubidium
Answer:
d Rubidium
Explanation:
The atomic radius of an atom is the distance from the center of the nucleus to its outermost electron.
The atomic radius of elements varies in the periodic table, it increases as you go down in a group and decreases along the period from left to right.
All the elements listed: Hydrogen, Sodium, Lithium and Rubidium belong to the same group in the periodic table (group 1), Since atomic radius increases from top to bottom in a group, Rubidium has the largest atomic radius.
A molecule is what ?
Answer:
Explanation:
A group of atoms bonded together and the smallest particle in a chemical element or compound that has the chemical properties of that element or compound. They are made up of atoms that are held together by chemical bonds. These bonds exchange electrons among atoms.
A molecule is just a group of two or more atoms bunched together.
What is the potential energy of the bowling ball as it sits on top of a building?
Answer:
Potential energy is the amount of energy calculated from an object's height off the ground.
Explanation:
Potential energy = Mass x Height x Gravity
Classify the following as an element, compound, homogeneous mixture, or heterogeneous
Mixture :
Iron and rust
A. Element
B. Compound
C. Homogenous mixture
D. Heterogenous mixture
Answer:
It's an homogeneous Mixture
hehe
For the reaction NH4Cl (s)→NH3 (g) + HCl (g) at 25°C, ΔH = 176 kJ/moland ΔS = 0.285 kJ/(mol - K).
What is the ΔG, and will this reaction be spontaneous in the forward direction?
169 kJ/mol; no
-91 kJ/mol; yes
91 kJ/mol; no
91 kJ/mol; yes
please answer quick
Answer:
91kj/mol;no
Explanation:
Took this before I gotchu.
What is the ΔG, and will this reaction be spontaneous in the forward direction? 91 kJ/mol; no
What does ΔG mean in chemistry?
Gibbs is a free number of power converters
In the active and frequent use of the Gibbs free energy change equation, ΔG is calculated from the fixed values that scientists can measure: the enthalpy and entropy changes of the reaction, and the temperature at which the reaction occurs.
What is Delta G measured in?
joules
measured in joules in SI) is the maximum amount of non-expansion work that can be extracted from a closed system (one that can exchange heat and work with its surroundings, but no matter) at fixed temperature and pressure. This maximum can be attained only in a completely reversible process.
Learn more about Delta G at https://brainly.com/question/4085992
#SPJ2
In a reaction, 25 grams of reactant
AB breaks down into 10 grams of
product A and an unknown amount
of product B. Using the law of conservation of mass, how much does product B weigh?
a. 25 g
B. 10 g
С. It cannot be determined from the given
information.
d
D. 15g
Answer:
D. 15g
Explanation:
The law of conservation of mass states that, in a chemical reaction, mass can neither be created nor destroyed. This means that the amount of matter in the elements of the reactants must be equal to the amount in the resulting products.
In this question, 25 grams of a reactant AB, was broken down in a reaction to produce 10 grams of products A and X grams of product B. According to the law of conservation of mass, the mass of the reactant must be equal to the total mass of the products. This means that 25 grams must also be the total mass of both products in this reaction. Hence, if product A is 10 grams, product B will be 25 grams - 10 grams = 15 grams.
Therefore, product B must be 15 grams in order to form a total of 25 grams when added to the mass of product A. This will equate the mass of the reactant AB and fulfill the law of conservation of mass.
The best method to improve air quality is to
A. use technology to reduce the pollutants in air
b. produce less pollution
c. produce less pollution and use technology to reduce the pollutants in air
d. better utilize land and technology to prevent pollution
Please select the best answer from the choices provided
Answer:
A produce less polution
Explanation:
Answer:
C) produce less pollution and use technology to reduce the pollutants in air
Explanation:
EDG2020
l Active transport
IL Simple diffusion
lll Facilitated diffusion
IV. Osmosis
Which of the above type of transport moves molecules against a concentration gradient?
Your answer:
ll and lV only
l only
ll only
Answer:
l only
Explanation:
The movement of substances in living cells can either require energy (active) or not (passive) depending on the direction of movement across concentration gradient. Naturally, substances tend to move down a concentration gradient i.e. difference in concentration, which is from a region of high concentration of water to a region of low concentration. This is the passive type of transport, which does not require energy input. Examples are osmosis, simple diffusion and facilitated diffusion.
However, another type of transport exists in which substances move against the concentration gradient i.e. from a less concentrated region to a more concentrated region. In this case, energy input in form of ATP is required for this kind of transport to occur. This transport is referred to as ACTIVE TRANSPORT. Hence, the answer is I only.
4. What is the name of A13+?
A)Aluminum ion
B)Aluminum
C)Aluminous ion
D)Aluminide ion
Answer:
Aluminum ion
Explanation:
I used Google tbh but it has a higher charge then a regular Aluminum atom
An element and an atom are different but related because
a) A particular element is made up of many different types of atoms b) A molecule is the same as an atom
c) An element is made up of all the same type of atom
d) An element is smaller than an atom
Answer:
c) An element is made up of all the same type of atom
Explanation:
Atoms are the smallest unit of an element that consists of protons, electrons and neutrons in its structure. An element is the smallest part of a chemical substance that cannot be disintegrated i.e. it cannot be broken down further.
Atoms and elements are different in many ways but they are connected in the sense that an element contains only one type of atoms. For example, aluminum element is made up of only aluminum atoms. Different atoms form a molecule but same atoms form an element.
The difference of the element and iron should be option c) An element is made up of all the same type of atom.
What are atoms and elements?The atom represents the smallest unit that comprises of protons, electrons, etc.
While on the other hand, the element represents the small part of the chemical substance that should not be disintegrated. Also, it cannot be split. They both should be interlinked.
Therefore, the option c is correct.
Learn more about an atom here: https://brainly.com/question/15893771
Which image shows a nonrenewable resource?
Answer: The orange can shall be your answer.
Atoms with a high electronegativity, like oxygen have a strong attractive force
for electrons because
A. they have only a few valence electrons and need a total of eight to
fulfill the octet rule
O B. they're trying to share electrons with other elements of high
electronegativity
O C. opposites attract
O D. they re close to filling their outer shell, fuffilling the octet rule
Answer:
D. they're close to filling their outer shell, fulfilling the octet rule
Explanation:
:)
Will Mark Brainly thing please help
Balance this equation. If a coefficient of "1" is required, choose "blank" for that box.
CO + O ₂ → CO ₂
Answer:
2CO + O ₂ → 2CO ₂
Explanation:
CO + O ₂ → CO ₂
Left Side
C = 1
O = 3
Right Side
C = 1
O = 2
So we'll balance the oxygen first
2CO + O ₂ → 2CO ₂
Left Side
C = 2
O = 4
Right Side
C = 2
O = 4
Ok so balancing the O has also balanced the C
What’s the answer to this?
Answer : The balanced chemical reaction will be:
[tex]3Ca(s)+2Al(NO_2)_3(aq)\rightarrow 2Al(s)+3Ca(NO_2)_2(aq)[/tex]
Explanation :
Balanced chemical reaction : It is defined as the reaction in which the number of atoms of individual elements present on reactant side must be equal to the product side.
When solid calcium metal reacts with aqueous aluminum nitrate then it gives aqueous calcium nitrate and solid aluminium.
The balanced chemical reaction will be:
[tex]3Ca(s)+2Al(NO_2)_3(aq)\rightarrow 2Al(s)+3Ca(NO_2)_2(aq)[/tex]
could some please help me with this? thank you
Answer:
C
Explanation:
Oxidation occurs at the anode. That means the element's oxidation number should increase. Mg has an oxidation number of 0, but Mg2+ has an oxidation number of 2, showing it was oxidized.
When designing an engineering solution, certain criteria and constraints must be considered. Criteria are the features of the design that must be kept in mind while solving the problem. A criterion answers the question, What do you want the design to do? A constraint is something that prevents the design from performing at its best. These constraints can include time, resources, and money.
When designing the airbag, what are some criteria you might consider and what constraints would you anticipate in its implementation?
Create a list of at least two criteria and at least three constraints that you must consider in the design. Rank them in order of importance, with the most important ones at the top of the list.
Answer:
The criteria listed in order of importance are;
1) To be inflated in the event of a collision in order to protect the occupants of the front of the vehicle
2) To be able to withstand the load of the breaking force of the occupants in the front seat of the vehicle during a collision
3) To be relatively tough so as to resist being torn on impact with a sharp object
The constraints listed in order of importance are;
1) How is the model design able to sense a collision that requires the airbag to be inflated
2) The uncertainty of the load the airbag will withstand upon collision
3) The possible hazard that could be caused by the gas used to inflate the airbag
4) The usage/interaction tendency between the vehicle occupant and the airbag system
Explanation:
In order to produce an effective design, it is important to be able to foresee the possible deficiencies of an idea so as to be able to mitigate the problems before an actual incident happens.
The criteria that should be considered include:
To be inflated in the event of a collision.Ability to withstand the load of the braking force of the occupants.Durability.It should be noted that when designing an engineering solution, there are some criteria and constraints that must be considered in order to achieve the objective of the engineering solution.
Some of the criteria that should be considered include the fact that it should be inflated in the event of a collision, the ability to withstand the impact of the braking force of the occupants, durability, etc.
The constraints listed include how the model design is able to sense a collision that requires the airbag. The possible hazards that can be caused by the gas. Also, it's vital to consider the interaction tendency between the airbag and the occupants of the vehicle.
Read related link on:
https://brainly.com/question/14469689
PLZ HELP QUICKLY!!!!!!!!
Portfolio: Reflection
Review everything from your portfolio thoughtfully. Answer the following questions carefully and specifically. Use your answers as a guide to prepare for your presentation. Your presentation will focus on your goals and your development and improvements this semester. As you answer these questions, evaluate your strengths as a student. Consider how your growth this semester has prepared you for advancement. Use complete sentences or a paragraph to respond to each item.
WHAT DOES THIS QUESTION MEAN: When you look through your portfolio, what improvements do you notice in your work?
What do they mean by WORK?
Answer:
they meen like what youve learned or like what youve been tonight....all that is work stuff you did for example school work.
2 The precipitate formed when sodium hydroxide reacts with solutions
containing metal ions is the corresponding METAL HYDROXIDE.
a Write word equations and symbol equations including state symbols)
to show how the following solutions react with sodium hydroxide:
magnesium sulfate, MgSO4
ii iron(II) sulfate, FeSO4
ili iron(III) chloride, FeCl3
iv copper(ll) chloride, CuCl2
Answer:
Explanation:
MgSO4 + 2NaOH -------> Mg(OH)2 + 2NaSO4
CuCl2 +2NaOH -------> Cu (OH)2 + 2Nacl
FeCl3 + 3NaOH ----> Fe(OH)3 + 3NaCl
based on this can you try for the FeSO4. similar to first reaction showed above
hii:) how to do (c)?
Answer:
C
Explanation:
C shows a mixture of CO2 and H2O, 2 compounds
Answer:
C
Explanation:
C shows a mixture of CO2 and H2O, 2 compounds
What is the converse of the conditional statement?
Ifx is even, then x + 1 is odd.
If x is not even, then x + 1 is not odd.
Ifx + 1 is odd, then x is even.
Ifx + 1 is not odd, then x is not even
Ifx is even, then x + 1 is not odd.
Answer:
Conversing the conditional statement is nothing but switching the hypothesis and conclusion. Therefore, the converse of the given conditional statement will be “If x is odd, then x+1 is even.
Explanation:
The converse of the conditional statement is if x is odd, then x+1 is even.
What is conditional statement?A conditional statement is defined as a specific kind of compound sentence that meets the "if...then" requirement. If the hypothesis is correct but the conclusion is untrue, a conditional statement is false. Programming language elements called conditional statements, expressions, or simply conditionals instruct the computer to take specific actions.
Reversing the two statements that make up a categorical or implicational statement yields its opposite. Carry on a discussion is more properly referred to as "converse." Let's say there is a conditional statement of the form "If p then q." If q, then p is the converse. In a symbolic sense, q p is the opposite of p q. The reverse of a conditional assertion is not logically comparable.
Thus, the converse of the conditional statement is if x is odd, then x+1 is even.
To learn more about conditional statement, refer to the link below:
https://brainly.com/question/10714086
#SPJ2
Neutralization Reactions
PREDICT THE PRODUCTS OF THE FOLLOWING REACTIONS
+
HNO3+ Ba(OH)2
+
H3PO4 + Ca(OH)2
→
Answer:
2HNO3+ Ba(OH)2 = Ba(NO3)2 + 2H2O
H3PO4 + Ca(OH)2 = Ca3(PO4)2 + 6H2O
Explanation:
2HNO3+ Ba(OH)2 = Ba(NO3)2 + 2H2O
H3PO4 + Ca(OH)2 = Ca3(PO4)2 + 6H2O
H+
O2-
OH-
Ba2+
Ca2+
NO3-
P 5+, 3+, 3-
H2O
Is Raisin Bran cereal with milk homogeneous
Answer:
no
Explanation:
Homogeneous means that the substance looks uniform throughout. This means that all of it looks the same (ex. juice or water). Because you can see the different parts of raisin bran cereal with milk it is not homogeneous, it is heterogeneous.
What happens to the motion of the atoms in a spoon after is placed in hot soup?
Answer:
they move faster
Explanation:
Answer:
They move faster.
Why does common table salt (NaCl) have a high melting point?
A.
It forms an ionic bond with a crystal lattice structure.
B.
It forms a covalent bond with a Lewis dot structure.
C.
It forms a metallic bond with an electron sea model structure.
D.
It forms a covalent bond by sharing electrons.
E.
It forms a metallic bond with a Lewis dot structure.
Answer:C is not the answer. I just got it wrong in Edmentum
Explanation:
