Answer:
Boron
Explanation:
Answer: a. boron
Explanation: bc the Boron Family is named after the first element in the family. atoms in this family have 3 valence electrons. this family includes a metalloid (boron), and the rest are metals.
Volume of water is 35 cm3 and mass of water is 60 gram, what is the density of the water.
Answer:
p = 1.714 g/cm3
Explanation:
Density Equation
p=mV
Where:
p = density
m = mass = 60g
V = volume = 35cm3
p = 60g x 35cm3
p = 1.714 g/cm3
p=1.714g/cm³
Explanation:
v=35cm³
m=60g
P=mass/volume (density formula)
=60/35
=1.714g/cm³
Interpret the following equation for a chemical reaction using the coefficients given: CO(g) Cl2(g) COCl2(g) On the particulate level: _________ of CO(g) reacts with _________ of Cl2(g) to form _________ of COCl2(g). On the molar level: _________ of CO(g) reacts with _________ of Cl2(g) to form _________ of COCl2(g).
Answer:
On the particulate level: 6.02 * 10²³ particles of CO(g) reacts with 6.02 * 10²³ particles of Cl₂(g) to form 6.02 * 10²³ particles of COCl2(g).
On the molar level: 1 mole of CO(g) reacts with 1 mole of Cl2(g) to form 1 mole of COCl₂(g).
Explanation:
The particulate level refers to the microscopic or atomic level of substances. It also involves the ions, protons, neutrons and molecules present in substances.
The molar level refers to the quantitative measure of substances in terms of the mole, where a mole represents the amount of substances containing the Avogadro number of particles which is equal to 6.02 * 10³ particles.
Equation of the reaction: CO(g) + Cl₂(g) ----> COCl₂(g)
From the equation above, I mole of CO gas reacts with 1 mole of Cl₂ gas to produce 1 mole of COCl₂ gas.
Since 1 mole of a substance contains 6.02 * 10²³ particles, on a particulate level, 6.02 * 10²³ particles of CO gas reacts with 6.02 * 10²³ particles of Cl₂ gas to produce 6.02 * 10²³ particles of COCl₂ gas.
Rubidium is ______ potassium in the periodic table. lodine is ______ bromine in the periodic table. Therefore, the rubidium ion is __________ than the potassium ion, and the iodine ion is___________ than the bromide ion. The _______ the distance between the rubidium ion and the iodide ion is the potassium ion and the bromide ion. Therefore, the energy associated with the interaction between rubidium and iodide is________ atomic radius means that than that between , and the lattice energy of potassium bromide is ________ more exothermidc.
Answer:
The given blanks can be filled with below, below, larger, larger, larger, larger and smaller.
Explanation:
In the periodic table, rubidium comes below the potassium, and iodine comes below bromine. Therefore, it can be said that the ion of rubidium is larger in comparison to potassium ion, and similarly the ion of iodine is larger in comparison to the ion of bromine.
When the atomic radius is larger it signifies that the distance in between the ion of iodine and the ion of rubidium is larger in comparison to that between the ion of potassium and the ion of bromine. Thus, smaller energy is associated with the interaction between iodine and rubidium, and potassium bromide's lattice energy is more exothermic.
Which of these tasks would a geologist be most likely to perform?
A. Determining the species of a recently collected specimen
O B. Hypothesizing how pieces of ancient pottery were used
O C. Creating a new kind of material using polymers
O D. Determining the best method to extract underground natural gas
SUBMIT
Answer:
Explanation:
O B. Hypothesizing how pieces of ancient pottery were used
In this lab, you are to carry out the formation of a Grignard reagent from 1-bromo-benzene andits subsequent reaction with solid carbon dioxide (CO2) followed by acidic workup (using HCl asthe acid). Write the overall reaction and product(s) that you expect.
Answer:
(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.
(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.
(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).
PRODUCTS=> C6H5-COOH and Mg^+Br(OH).
Explanation:
A Grignard reagent is a reagent that/which is an organometallic compound that is R -Mg- X. The R = alkyl, vinyl or allyl and the X = halogens.
It must be noted that an important reaction of Grignard reagent is its reaction with compounds containing the Carbonyl that is -CO functional group and this kind of Reaction is known as a Grignard Reaction.
So, in this question we are told that;
=> "1-bromo-benzene andits subsequent reaction with solid carbon dioxide (CO2) followed by acidic workup (using HCl asthe acid). "
Thus;
(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.
(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.
(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).
how many molecules (not moles) of NH3 are produced from 5.25x10^-4 g of H2?
due in a few, please help. will mark as brainliest
Answer:
not 100% but i think its 1.57x10^20
Explanation:
5.25x10^-4g / 2.016g
2.60x10^-4 x 6.022x10^23= 1.56x10^20 molecules
At that volume is measured to be 755 mm of Hg. If the lungs are compressed to a newA healthy male adult has a lung capacity around 6.00 liters. The pressure in the lungs volume of 3.81 liters, what would be the new pressure in the lungs? What would happen to the air in the lungs?
Answer:
1188.976 mmHg
Explanation:
Initial pressure P1= 755 mmHg
Initial volume V1 = 6.00 litres
Final volume V2 = 3.81 litres
Final pressure P2= the unknown
Now applying Boyle's Law,we have;
P1V1 = P2V2
Since P2 is the unknown then it has to be made the subject of the formula.
P2=P1V1/ V2
P2= 755 × 6.00/ 3.81
P2= 1188.976 mmHg
Therefore, the new pressure is; 1188.976 mmHg
Why are there different theories about the effects of global warming?
One of the reagents below gives predominantly 1,2 addition (direct addition) while the other gives predominantly 1,4 addition (conjugate addition). a) Which major organic product is the result of 1,2 addition? ---Select--- b) Draw the skeletal structure of major organic product A
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
The correct option is reagent B
b
The skeletal structure of major organic product A is shown on the third uploaded image
Explanation:
The mechanism of the reaction for A and B are shown on the second the second reaction and looking at this we can see that the reagent that predominately gives 1,2 addition is reagent B
1.Draw the born-Haber lattice energy cycle for sodium chloride. Explain the concept of resonance using the nitrate ion structure.
Answer:
1. Born Haber cycle is used to calculate enthalpy of formation of an ionic solid
2. Resonance structures are used to represent the bonding in some chemical species.
Explanation:
The Born–Haber cycle is a method popularly known in chemistry used in computing enthalpy. The enthalpy of formation of an ionic solid cannot be measured directly. The lattice enthalpy refers to the enthalpy change involved in the formation of an ionic compound from gaseous ions the process is exothermic process. A Born–Haber cycle works on the principle of Hess's law. It can be used to calculate the lattice enthalpy by comparing the standard enthalpy change of formation of the ionic compound from the elements to the enthalpy required to make gaseous ions from the elements.
Resonance is an idea introduced by Linus Pauling to explain chemical bonding from the valence bond perspective. The idea of resonance affords us the opportunity to describe the bonding in certain molecules by combining several structures called chemical or canonical structures. The real structure of the specie lie somewhere between the structures indicated by the resonance structures. The resonance structures of the nitrate ion are shown in the image attached.
One proposed mechanism of the reaction of HBr with O2 is given here. HBr + O2 → HOOBr (slow) HOOBr + HBr → 2HOBr (fast) HOBr + HBr → H2O + Br2 (fast) What is the equation for the overall reaction?
Answer:
4 HBr + O2 → + 2H2O + 2Br2
Explanation:
Based on the following reaction mechanism:
HBr + O2 → HOOBr (slow)
HOOBr + HBr → 2HOBr (fast)
HOBr + HBr → H2O + Br2 (fast)
The equation for the overall reaction is the sum of the three reactions in which intermediaries of reaction (HOBr and HOOBr are canceled). That is 1 + 2 + 2*(3):
HBr + O2 + HOOBr + HBr + 2HOBr + 2HBr → HOOBr + 2HOBr + 2H2O + 2Br2
4 HBr + O2 → + 2H2O + 2Br2Beeing this reaction the equation of the overall reaction.
Which of the following is evidence for a physical change? A) burning B) fizzing C) evaporating D) rusting
Answer:c
Explanation: rusting, burning and fuzzing are all examples of chemical reactions/changes.
Using the following balanced chemical equation 8 H2 + S8à 8 H2S. Determine the mass of the product (molar mass = 34.08g/mol) if you start with 1.35 g of hydrogen and 6.86 g of S8 (Molar mass = 256.5 g/mole).
Answer: 7.29 g of [tex]H_2S[/tex] will be produced from the given masses of both reactants.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]{\text{Moles of} H_2}=\frac{1.35g}{2.01g/mol}=0.672moles[/tex]
[tex]\text{Moles of} S_8=\frac{6.86g}{256.5g/mol}=0.0267moles[/tex]
[tex]8H_2+S_8\rightarrow 8H_2S[/tex]
According to stoichiometry :
1 mole of [tex]S_8[/tex] require = 8 moles of [tex]H_2[/tex]
Thus 0.0267 moles of [tex]S_8[/tex] will require=[tex]\frac{8}{1}\times 0.0267=0.214moles[/tex] of [tex]H_2[/tex]
Thus [tex]S_8[/tex] is the limiting reagent as it limits the formation of product and [tex]H_2[/tex] is the excess reagent.
As 1 mole of [tex]S_8[/tex] give = 8 moles of [tex]H_2S[/tex]
Thus 0.0267 moles of [tex]S_8[/tex] give =[tex]\frac{8}{1}\times 0.0267=0.214moles[/tex] of [tex]H_2S[/tex]
Mass of [tex]H_2S=moles\times {\text {Molar mass}}=0.214moles\times 34.08g/mol=7.29g[/tex]
Thus 7.29 g of [tex]H_2S[/tex] will be produced from the given masses of both reactants.
A chemist titrates of a butanoic acid solution with solution at . Calculate the pH at equivalence. The of butanoic acid is__________ .Round your answer to decimal places.
Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of solution added.
Answer:
pH = 8.75
Explanation:
100.0mL of a 0.8108M of a butanoic acid (HC₃H₇CO₂, pKa 4.82) solution is titrated with 0.0520M KOH.
The reaction is:
HC₃H₇CO₂ + KOH → H₂O + KC₃H₇CO
Moles of butanoic acid are:
0.1000L × (0.8108mol / L) = 0.08108 moles of butanoic
For a complete reaction, volume of KOH must be added is the volume in which 0.08108 moles of KOH are added, that is:
0.08108 mol × (L / 0.0520mol) = 1.56L of KOH.
Total volume in equilibrium is 1.56L + 0.10L = 1.66L
That means concentration of butanoic acid is:
0.08108 mol / 1.66L = 0.04884M HC₃H₇CO₂
At equivalence point, there is just C₃H₇CO⁻ in solution
Kb of butanoic acid is:
C₃H₇CO⁻ + H₂O ⇄ HC₃H₇CO₂ + OH⁻
Kb = Kw / Ka
Ka = 10^-pKa
Ka = 1.51x10⁻⁵
Kb = 1x10⁻¹⁴ / 1.51x10⁻⁵ = 6.61x10⁻¹⁰
The equilibrium of Kb is:
Kb = 6.61x10⁻¹⁰ = [HC₃H₇CO₂] [OH⁻] / [C₃H₇CO⁻]
As at equivalence point there is just C₃H₇CO⁻, the equilibrium concentrations are:
[C₃H₇CO⁻] = 0.04884M - X
[HC₃H₇CO₂] = X
[OH⁻] = X
Replacing in Kb:
6.61x10⁻¹⁰ = X² / [0.04884M - X]
0 = X² + 6.61x10⁻¹⁰X - 3.23x10⁻¹¹
Solving for X:
X = -5.68x10⁻⁶ → False solution. There is no negative concentrations
X = 5.683x10⁻⁶ → Right solution.
As [OH⁻] = X, [OH⁻] = 5.683x10⁻⁶.
pOH = - log [OH⁻]
pOH = 5.245
pH = 14 - pOH
pH = 8.75why are the products of light reaction of photosythesis important
Answer: light reaction produces oxygen and water as we know the general importance of oxygen and water they are useful for organism to survive if plants do not produce oxygen then how could we get oxygen from the environment
Which of the following is an example of a mechanical wave?
O A. A light ray
B. A seismic wave
C. A radio wave
D. An X-ray
Answer:
A seismic wave
Explanation:
It requires a medium for its propagation.
Give the IUPAC name for the following compound: Multiple Choice (1R,3R)-1-ethyl-3-methylcyclohexane (1S,3S)-1-ethyl-3-methylcyclohexane (1R,3S)-1-ethyl-3-methylcyclohexane (1S,3R)-1-ethyl-3-methylcyclohexane
Answer:
(1R,3R)-1-ethyl-3-methylcyclohexane.
Explanation:
NOTE: The question is not complete since we do not have the diagram to the chemical structure in the question. Kindly check the attached picture for the diagram of the chemical structure.
So, in order to name Enantiomers or chemical structure through the use of the R,S system requires series of rules and regulations to follow for the proper naming.
There is an ethyl attached to the compound as the first substituents and methyl at the third which are the secondary prefix.
=> The longest chain is 6, thus the compound has hexane as the root compound.
=> It is (1R,3R) because when we draw from the highest substituents to the lower substituents, this is done in a clockwise direction.
Given the equation 2KCIO3(s)=2KCI(s) + 3O2(g). A 3.00-g sample of KCIO3 is decomposed and the oxygen at 24 degrees C and 0.982 atm is collected. What volume of oxygen gas will be collected assuming 100% yield?
Answer:
0.912 L or 912 mL
Explanation:
M(KClO3) = 122.55 g/mol
3.00 g KClO3 * 1 mol/122.55 g = 3.00/122.55 mol =0.02449 mol
2KCIO3(s)=2KCI(s) + 3O2(g)
from reaction 2 mol 3 mol
given 0.02449 mol x
x = 0.02449*3/2 =0.03673 mol O2
T = 24 + 273.15 = 297.15 K
PV = nRT
V= nRT/P = (0.03673 mol*0.082057 L*atm/K*mol*297.15 K)/0.982 atm =
= 0.912 L or 912 mL
A thermometer is placed in water in order to measure the water’s temperature. What would cause the liquid in the thermometer to rise? The molecules in the water move closer together. The molecules in the thermometer’s liquid spread apart. The kinetic energy of the water molecules decreases. The kinetic energy of the thermometer’s liquid molecules decreases.
Answer:
The molecules in the thermometer’s liquid spread apart
Explanation:
The molecules in the thermometer’s liquid spread apart.
What is thermometer?A thermometer is a device that measures temperature or a temperature gradient.
What causes the liquid in the thermometer to rise?The liquid (water) in thermometer exhibits convex meniscus, as a result of this meniscus, the water molecules in the thermometer will spread apart when temperature is measured.
Learn more about thermometer here: https://brainly.com/question/21720093
Gravity on Earth is 9.8 m/s2, and gravity on the Moon is 1.6 m/s2.
so if the mass of an object on earth is 40 kilograms what is the mass on the moon.
and how much does it way
Answer:
Mass is the same but it weights 64 Newtons
Explanation:
First of Mass is the same in any sort of gravity. Now let's calculate weight
W = MG
where W = Weight
M = Mass
G = Gravity
W = (40kg)(1.6)
W = 64
Sorry for the spelling mistakes, hope this helps
Answer:6.61kilo
Explanation: fdfv
What is Keq for the reaction 2HCl(9) = H2(g) + Cl2(g)?
Answer:
Keq= [(Cl2) (H2)] / (HCl)^2
Explanation:
Equilibrium Constant, Keq, is written as products/reactants.
So it's going to be Keq= [(Cl2) (H2)] / (HCl)^2
Pick the odd one out?
Ethanol
Hexane
Oil
Carbon tetrachloride
Answer: Ethanol is the odd one out.
Explanation:
A polar compound is defined as the compound which is formed when there is a difference of electronegativities between the atoms. It is also defined as the bond which is formed due to the unequal sharing of electrons between the atoms.
Non-polar compound is defined as the compound which is formed when there is no difference of electronegativities between the atoms or the polarities cancel out.
Hexane [tex](C_6H_{14}), Oil (mixture of hydrocarbons) and carbon tetrachloride [tex](CCl_4)[/tex] all are non polar whereas ethanol is polar due to electronegative difference between hydrogen and oxygen.
A gas has a volume of 6.6 L at a temperature of 40 C. What is the volume of
the gas if the temperature changes to 15 C?
Answer:
6.07 L
Explanation:
It appears that the reading has been made at constant pressure .
At constant pressure , the gas law formula is
V/T = constant V is volume and T is temperature of the gas.
V₁ / T₁ = V₂ / T₂
V₁ = 6.6 L ,
T₁ = 40°C
= 273 + 40
= 313 K
T₂ = 15+ 273
= 288K
V₂ = ?
Putting the values in the formula above
6.6 / 313 = V₂ / 288
V₂ = 6.07 L.
Catalysts are substances that increase the rate of reaction but can be recovered unchanged at the end of the reaction. Catalysts can be classified as either homogeneous (same state as reactants) or heterogeneous (different state than reactants).
Platinum is used to catalyze the hydrogenation of ethylene:
H2(g)+CH2CH2(g)−⟶Pt(s)CH3CH3(g)
Chlorofluorocarbons (CFCs) catalyze the conversion of ozone (O3) to oxygen gas (O2):
2O3(g)−⟶CFC(g)3O2(g)
Magnesium catalyzes the disproportionation of hydrogen peroxide to produce water and oxygen:
2H2O2(aq)−⟶Mg(s)2H2O(l)+O2(g)
What type of catalysts are platinum, CFCs, and magnesium under these conditions?
Answer:
- Platinum acts as a heterogeneous catalyst in the hydrogenation of ethylene.
- CFCs act as homogeneous catalysts in the conversion of ozone to oxygen gas.
- Magnesium acts as a heterogeneous catalyst in the disproportionantion of hydrogen peroxide.
Explanation:
Hello,
For the given reactions, considering the definition of homogeneous and heterogeneous catalyst, we can identify that is each catalyst behave as follows:
- Platinum acts as a heterogeneous catalyst in the hydrogenation of ethylene as all the reactants are gaseous but it remains solid.
- CFCs act as homogeneous catalysts in the conversion of ozone to oxygen gas as it remains gaseous as well as both ozone and oxygen.
- Magnesium acts as a heterogeneous catalyst in the disproportionantion of hydrogen peroxide as it is solid whereas the other species are aqueous, liquid and gaseous
Best regards.
A laser is used in eye surgery to weld a detached retina back into place. The wavelength of the laser beam is 503 nm, while the power is 1.4 W. During surgery, the laser beam is turned on for 0.070 s. During this time, how many photons are emitted by the laser?
Answer:
Number of proton emmitted by laser=[tex]2.48*10^17proton[/tex]
Explanation:
Energy is the ability to cause change; power is directly proportional to energy and its the rate energy is utilized.
Power=energy/time.
First we need to calculate the total energy used which is equal to the total power utilized.
E(total)= P( total) = 1.4W × 0.070 s =[tex]0.098J[/tex]
CHECK THE ATTACHMENT FOR THE REMAINING DETAILED CALCULATION
A chemistry student weighs out of an unknown solid compound and adds it to of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Complete Question
A chemistry student weighs out 0.950 kg of an unknown solid compound and adds it to 2.00 L of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Answer:
a
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
b
The solubility of X is [tex]S = 190 g /L[/tex]
Explanation:
From the question we are told that
The initial mass of the unknown solid is [tex]m_i =0. 950 \ kg[/tex]
The mass of the undissolved substance is [tex]m_u = 0.570 \ kg[/tex]
The volume of the solution is [tex]V =2.00\ L[/tex]
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
The mass of the substance that dissolved ([tex]m_d[/tex] ) is mathematically represented as
[tex]m_d = m_i - m_u[/tex]
[tex]m_d = 0.95 - 0.570[/tex]
[tex]m_d = 0.38 \ kg = 0.38 *1000 = 380 g[/tex]
The solubility of this substance (X) is mathematically represented as
[tex]S = \frac{m_d}{V}[/tex]
substituting values
[tex]S = \frac{ 380}{2}[/tex]
[tex]S = 190 g /L[/tex]
The realization that guanine and thymine base pair to cysteine and adenine, respectively, through their keto-like tautomeric forms has ultimately led to which types of technologies seen in popular TV shows like CSI and Law and Order?
a. DNA sequencing and profiling
b. Flexible display monitors
c. Smart phones
d. Police cars
Answer:
The correct answer to the following question will be Option A (DNA sequencing and profiling).
Explanation:
It is indeed a procedure through which a specific DNA sequence named as the profile is chosen to take from either a sample or perhaps a survey. For humans, much more of the DNA sequence will be the same, although only different regions differ in sequencing, such locations are considered polymorphic. The disparity between individuals regardless of such a particular process is named as polymorphisms, and then this method is being used in the detection of murders, parental conflicts, etc.The other three situations aren't connected to the situation in question. That option 1 seems to be the right answer.
The compound ClF contains Group of answer choices polar covalent bonds with partial negative charges on the Cl atoms. ionic bonds. nonpolar covalent bonds. polar covalent bonds with partial negative charges on the F atoms.
Answer:
polar covalent bonds with partial negative charges on the F atoms.
Explanation:
A covalent bond could be polar or nonpolar depending on the relative electro negativity difference between the two bonding atoms. In this case, the bonding atoms are chlorine and fluorine.
In the Pauling's scale, fluorine has an electro negativity value of 3.98 while chlorine has an electro negativity value of 3.16. The difference in electro negativity between the two atoms is about 0.82. This magnitude of electro negativity difference between the two bonding atoms correspond to the existence of a polar covalent bond in the molecule.
The direction of the dipole depends on the relative electro negativity values of the two bonding atoms. Since fluorine is more electronegative than chlorine, the fluorine atom will be partially negative and the chlorine atom will be partially positive accordingly.
The compound ClF (chlorine monofluoride) contains polar covalent bonds with partial negative charges on the F atoms. Therefore, option D is correct.
In ClF, chlorine (Cl) is more electronegative than fluorine. As a result, the shared electrons in the Cl-F bond are pulled closer to the chlorine atom, creating a partial negative charge on the fluorine atoms and a partial positive charge on the chlorine atom.
This polarity in the Cl-F bond gives the molecule an overall polarity, making it a polar molecule. Thank you for pointing out the error, and I apologize for any confusion caused.
Thus, option D is correct.
To learn more about the polar covalent bonds, follow the link:
https://brainly.com/question/28295508
#SPJ6
Acetic acid and ethanol react to form ethyl acetate and water.If 94.0 mmol of C2H5CO2CH3 are removed from a flask containing a mixture of HCH3CO2, C2H5OH, C2H5CO2CH3 and H2O at equilibrium, then following questions are to be answered. 1. What is the rate of the reverse reaction before any C2H5CO2CH3 has been removed from the flask?2. What is the rate of the reverse reaction just after the C2H5CO2CH3 has been removed from the flask?3. What is the rate of the reverse reaction when the system has again achieved equilibrium?4. How much less C2H5CO2CH3 is in the flask when the system has again reached equilibrium?
Answer:
Explanation:
The equation for the react between Acetic acid and ethanol to form ethyl acetate and water is :
[tex]HCH_3CO_2_{(aq)}+C_2H_5OH_{(aq)} \to C_2H_5CO_2CH_3_{(aq)} + H_2O_{(l)}[/tex]
Imagine if 94.0 mmol of [tex]C_2H_5CO_2CH_3[/tex] are removed from a flask; Then:
We are to answer the following questions:
1. What is the rate of the reverse reaction before any [tex]C_2H_5CO_2CH_3[/tex] has been removed from the flask?
The reaction above is called an esterification reaction;
So the rate of reverse reaction before any [tex]C_2H_5CO_2CH_3[/tex] is removed is greater than zero and equal to forward reaction rate.
2. What is the rate of the reverse reaction just after the [tex]C_2H_5CO_2CH_3[/tex] has been removed from the flask?
Just after the [tex]C_2H_5CO_2CH_3[/tex] has been removed from the flask, the rate of the reverse reaction is greater than zero but less than forward reaction rate.
3. What is the rate of the reverse reaction when the system has again achieved equilibrium?
When the system has again achieved equilibrium, the rate of the reverse reaction is greater than zero and equal to forward reaction rate because we it has achieved the equilibrium, hence, the reaction tends to proceed in the forward direction.
4. How much less [tex]C_2H_5CO_2CH_3[/tex] is in the flask when the system has again reached equilibrium?
The [tex]C_2H_5CO_2CH_3[/tex] in the flask when the system has again reached equilibrium is lesser by 94.0 mmol as given right from the question
please help!!!! Chem question
Answer : The net ionic equation will be,
[tex]Ba^{2+}(aq)+SO_4^{2-}(aq)\rightarrow BaSO_4(s)[/tex]
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
The given balanced ionic equation will be,
[tex]Ba(OH)_2(aq)+H_2SO_4(aq)\rightarrow 2H_2O(aq)+BaSO_4(s)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]Ba^{2+}(aq)+2OH^-(aq)+2H^{+}(aq)+SO_4^{2-}(aq)\rightarrow BaSO_4(s)+2H^+(aq)+2OH^{-}(aq)[/tex]
In this equation, [tex]H^+\text{ and }OH^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]Ba^{2+}(aq)+SO_4^{2-}(aq)\rightarrow BaSO_4(s)[/tex]
