the part of the brain stem called the has been shown to related to arousal in lab animals. when this part is stimulated the animal is awake when it is severed cut the animal goes into coma

Answers

Answer 1

Answer:

Its called PSY

Explanation: I so do not know why they named it this way but, hope i helped.


Related Questions

Which person will most likely hear the loudest sound?

A
B
C
D

Answers

Answer:

The youngest person

Explanation:

Hearing worsens with age

Please mark brainliest

Answer:

A

Explanation:

The person closest to the origin of the sound will most likely hear the loudest sound. ^^

This problem explores the behavior of charge on conductors. We take as an example a long conducting rod suspended by insulating strings. Assume that the rod is initially electrically neutral. For convenience we will refer to the left end of the rod as end A, and the right end of the rod as end B. In the answer options for this problem, "strongly attracted/repelled" means "attracted/repelled with a force of magnitude similar to that which would exist between two charged balls.A small metal ball is given a negative charge, then brought near (i.e., within about 1/10 the length of the rod) to end A of the rod. What happens to end A of the rod when the ball approaches it closely this first time?

Answers

Answer:

rod end A is strongly attracted towards the balls

rod end B is weakly repelled by the ball as it is at a greater distance

Explanation:

When the ball with a negative charge approaches the A end of the neutral bar, the charge of the same sign will repel and as they move they move to the left end, leaving the rod with a positive charge at the A end and a negative charge of equal value at end B.

Therefore rod end A is strongly attracted towards the balls and

rod end B is weakly repelled by the ball as it is at a greater distance

student conducted an experiment and find the density of an ICEBERGE. A students than recorded the following readings. Mass 425 25   g Volume 405 15   mL What experimental value should be quoted for the density of the ICEBERG? Compare your answer with the density of water, which is 3 1.00 10  kg . Show any calculations necessary to justify your answer

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

The experimental value of density is   [tex]\rho = 1.05*10^{3} \ kg/m^3 \pm 101 \ kg/m^3[/tex]

Comparing it with the value of density of water ([tex]1.0*10^{3} \ kg/m^3[/tex]) we can see that the density of ice is greater

Explanation:

From the question we are told

    The mass is [tex]M = (425 \pm 25) \ g =(0.425 \pm 0.025) \ kg[/tex]

   The volume is [tex]V = (405 \pm 15 ) \ mL = (0.000405 \pm 1.5*10^{-5}) \ m^3[/tex]

The experimental value of density is mathematically evaluated as

        [tex]\rho = \frac{M}{V}[/tex]

       [tex]\rho = \frac{0.425}{0.000405}[/tex]

       [tex]\rho = 1.05 *10^{3} \ kg/m^3[/tex]

The possible error in this experimental value of density is mathematically evaluated as

        [tex]\frac{\Delta \rho}{\rho} = \frac{\Delta M}{M} +\frac{\Delta V}{V}[/tex]

substituting value

         [tex]\frac{\Delta \rho}{1.05*10^{3}} = \frac{0.025}{0.425} +\frac{1.5*10^{-5}}{0.000405}[/tex]

        [tex]\Delta \rho = 101 \ kgm^{-3}[/tex]

Thus the experimental value of density is

             [tex]\rho = 1.05*10^{3} \ kg/m^3 \pm 101 \ kg/m^3[/tex]

                     

     

Compare the energy consumption of two commonly used items in the household. Calculate the energy used by a 1.40 kW toaster oven, Wtoaster , which is used for 5.40 minutes , and then calculate the amount of energy that an 11.0 W compact fluorescent light (CFL) bulb, Wlight , uses when left on for 10.50 hours .

Answers

Energy = (power) x (time)

-- For the toaster:

Power = 1.4 kW  =  1,400 watts

Time = 5.4 minutes = 324 seconds

Energy = (1,400 W) x (324 s)  =  453,600 Joules

-- For the CFL bulb:

Power = 11 watts

Time = 10.5 hours = 37,800 seconds

Energy = (11 W) x (37,800 s)  =  415,800 Joules

-- The toaster uses energy at 127 times the rate of the CFL bulb.

-- The CFL bulb uses energy at 0.0079 times the rate of the toaster.

-- The toaster is used for 0.0086 times as long as the CFL bulb.

-- The CFL bulb is used for 116.7 times as long as the toaster.    

-- The toaster uses 9.1% more energy than the CFL bulb.

-- The CFL bulb uses 8.3% less energy than the toaster.  

EASY HELP
As a space shuttle climbs, _____.
its mass increases
its mass decreases
its weight increases
its weight decreases

Answers

Answer: it's weight decreases

Explanation:

A skateboarder, starting from rest, rolls down a 12.8-m ramp. When she arrives at the bottom of the ramp her speed is 8.89 m/s. (a) Determine the magnitude of her acceleration, assumed to be constant. (b) If the ramp is inclined at 32.6 ° with respect to the ground, what is the component of her acceleration that is parallel to the ground?

Answers

Answer:

a) a = 3.09 m/s²

b) aₓ = 2.60 m/s²

Explanation:

a) The magnitude of her acceleration can be calculated using the following equation:

[tex] V_{f}^{2} = V_{0}^{2} + 2ad [/tex]

Where:

[tex]V_{f}[/tex]: is the final speed = 8.89 m/s

[tex]V_{0}[/tex]: is the initial speed = 0 (since she starts from rest)

a: is the acceleration

d: is the distance = 12.8 m    

[tex] a = \frac{V_{f}^{2}}{2d} = \frac{(8.89 m/s)^{2}}{2*12.8 m} = 3.09 m/s^{2} [/tex]

Therefore, the magnitude of her acceleration is 3.09 m/s².              

b) The component of her acceleration that is parallel to the ground is given by:

[tex] a_{x} = a*cos(\theta) [/tex]

Where:

θ: is the angle respect to the ground = 32.6 °

[tex] a_{x} = 3.09 m/s^{2}*cos(32.6) = 2.60 m/s^{2} [/tex]

Hence, the component of her acceleration that is parallel to the ground is 2.60 m/s².

I hope it helps you!

A skateboarder, starting from rest, rolls down a 12.8-m ramp the magnitude of the skateboarder's acceleration is approximately 3.07 [tex]m/s^2[/tex], the component of her acceleration that is parallel to the ground is approximately 1.66 [tex]m/s^2[/tex].

(a) The following kinematic equation can be used to calculate the skateboarder's acceleration:

[tex]v^2 = u^2 + 2as[/tex]

[tex](8.89)^2 = (0)^2 + 2a(12.8)[/tex]

78.72 = 25.6a

a = 78.72 / 25.6

a = 3.07 [tex]m/s^2[/tex]

(b) Trigonometry can be used to calculate the part of her acceleration that is parallel to the ground. We are aware that the ramp's angle with the ground is 32.6°.

[tex]a_{parallel }= a * sin(\theta)[/tex]

Plugging in the values:

[tex]a_{parallel[/tex] = 3.07  [tex]m/s^2[/tex]* sin(32.6°)

[tex]a_{parallel[/tex]≈ 1.66  [tex]m/s^2[/tex]

Therefore, the component of her acceleration that is parallel to the ground is approximately 1.66  [tex]m/s^2[/tex].

For more details regarding acceleration, visit:

https://brainly.com/question/2303856

#SPJ6

A certain type of laser emits light that has a frequency of 4.6 x 1014 Hz. The light, however, occurs as a series of short pulses, each lasting for a time of 3.1 x 10-11s. The light enters a pool of water. The frequency of the light remains the same, but the speed of light slows down to 2.3 x 108 m/s. In the water, how many wavelengths are in one pulse

Answers

Answer:

14,260

Explanation:

Relevant data provided for computing the wavelengths are in one pulse is here below:-

The number of wavelengths in Ls = [tex]4.6\times 10_1_4[/tex]

Therefore the Number of in time = Δt = [tex]3.1\times 10_-_1_1[/tex]

The number of wavelengths are in one pulse is shown below:-

[tex]Number\ of\ wavelengths = \triangle t\times f[/tex]

[tex]= 3.1\times 10_-_1_1\times 4.6\times 10_1_4[/tex]

= 14,260

Therefore for computing the number of wavelengths are in one pulse we simply applied the above formula.

Although these quantities vary from one type of cell to another, a cell can be 2.2 micrometers in diameter with a cell wall 40 nm thick. If the density (mass divided by volume) of the wall material is the same as that of pure water, what is the mass (in mg) of the cell wall, assuming the cell to be spherical and the wall to be a very thin spherical shell?

Answers

Answer:

m = 6.082 x 10⁻¹⁶ kg = 6.082 x 10⁻¹⁰ mg

Explanation:

First, we find the the surface area of the cell wall. Since, the cell is spherical in shape. Therefore, surface area of cell wall will be:

A = 4πr²

where,

A = Surface Area = ?

r = Radius of Cell = Diameter/2 = 2.2 μm/2 = 1.1 μm = 1.1 x 10⁻⁶ m

Therefore,

A = 4π(1.1 x 10⁻⁶ m)²

A = 15.2 x 10⁻¹² m²

Now, we find the volume of the cell wall. For that purpose, we use formula:

V = At

where,

V = Volume of the Cell Wall = ?

t = Thickness of Wall = 40 nm = 4 x 10⁻⁸ m

Therefore,

V = (15.2 x 10⁻¹² m²)(4 x 10⁻⁸ m)

V = 60.82 x 10⁻²⁰ m³

Now, to find mass of cell wall, we use formula:

ρ = m/V

m = ρV

where,

ρ = density of water = 1000 kg/m³

m = Mass of Wall = ?

Therefore,

m = (1000 kg/m³)(60.82 x 10⁻²⁰ m³)

m = 6.082 x 10⁻¹⁶ kg = 6.082 x 10⁻¹⁰ mg

The mass of the cell wall in mg is 6.082 × 10⁻¹⁰ mg

Since we assume the cell to be spherical and the wall to be a thin spherical shell, the volume of the cell wall V = At where

A = surface area of cell = 4πR² where R = radius of cell = 2.2 μm/2 = 1.1 × 10⁻⁶ m and t = thickness of cell wall = 40 nm = 40 × 10⁻⁹ m.Volume of cell wall

So, V = 4πR²t

Substituting the values of the variables into the equation, we have

V = 4πR²t

V = 4π(1.1 × 10⁻⁶ m)² × 40 × 10⁻⁹ m.

V = 4π(1.21 × 10⁻¹² m²) × 40 × 10⁻⁹ m.

V = 193.6π × 10⁻²¹ m³

V = 608.21 × 10⁻²¹ m³

V = 6.0821 × 10⁻¹⁹ m³

V ≅ 6.082 × 10⁻¹⁹ m³

Mass of the cell wall

We know that density of cell wall, ρ = m/v where m = mass of cell wall and V = volume of cell wall.

Making m subject of the formula, we have

m = ρV

Since we assume the density of the cell wall to be equal to that of pure water, ρ = 1000 kg/m³

So, m = ρV

m = 1000 kg/m³ × 6.082 × 10⁻¹⁹ m³

m = 6.082 × 10⁻¹⁶ kg

Converting to mg, we have

m = 6.082 × 10⁻¹⁶ kg × 10⁶ mg/kg

m = 6.082 × 10⁻¹⁰ mg

So, the mass of the cell wall in mg is 6.082 × 10⁻¹⁰ mg

Learn more about mass of cell wall here:

https://brainly.com/question/13173768

how does the statement " silence is golden " relate to ethics in communicating at the workplace.?​

Answers

Answer:

Being silent most of the time is a good virtue under certain circumstances and environment. It is always advisable to remain quite silent and not be too quick to respond to situations or issues so as to avoid making and saying wrong words.

The ethics in a workplace involves communicating with others with less amount of talking as possible and more of body languages and signs. This is because the workplace is meant to be a serene place.

A rod of mass M = 154 g and length L = 35 cm can rotate about a hinge at its left end and is initially at rest. A putty ball of mass m = 11 g, moving with speed V = 9 m/s, strikes the rod at angle θ = 29° a distance D = L/3 from the end and sticks to the rod after the collision.Calculate the rotational kinetic energy, in joules, of the system after the collision.

Answers

Answer:

Explanation:

moment of inertia of the rod = 1/3 mL² , m is mass and L is length of rod.

1/3 x .154 x .35²

= .00629

moment of inertia  of putty about the axis of rotation

= m d² , m is mass of putty and d is distance fro axis

= .011 x( .35 / 3 )²

= .00015

Total moment of inertia I = .00644 kgm²

angular momentum of putty about the axis of rotation

= mvRsinθ

m is mass , v is velocity , R is distance where it strikes the rod and θ is angle  with the rod at which putty strikes

= .011 x 9 x .35 / 3 x sin 29

= .0056

Applying conservation of angular momentum

angular momentum of putty = angular momentum of system after of collision

.0056 =  .00644 ω where ω is angular velocity of the rod after collision

ω = .87 rad /s .

Rotational energy

= 1/2 I ω²

I is total moment of inertia

=  .5 x .00644 x .87²

= 2.44 x 10⁻³ J .

Light bulb 1 operates with a filament temperature of 3000 K, whereas light bulb 2 has a filament temperature of 2000 K. Both filaments have the same emissivity, and both bulbs radiate the same power. Find the ratio A1/A2 of the filament areas of the bulbs.

Answers

Answer:

A₁/A₂ = 0.44

Explanation:

The emissive power of the bulb is given by the formula:

P = σεAT⁴

where,

P = Emissive Power

σ = Stefan-Boltzman constant

ε = Emissivity

A = Surface Area

T = Absolute Temperature of Surface

FOR BULB 1:

Since, emissivity and emissive power are constant.

Therefore,

P = σεA₁T₁⁴   ----------- equation 1

where,

A₁ = Surface Area of Bulb 1

T₁ = Temperature of Bulb 1 = 3000 k

FOR BULB 2:

Since, emissivity and emissive power are constant.

Therefore,

P = σεA₂T₂⁴   ----------- equation 2

where,

A₂ = Surface Area of Bulb 2

T₂ = Temperature of Bulb 1 = 2000 k

Dividing equation 1 by equation 2, we get:

P/P = σεA₁T₁⁴/σεA₂T₂⁴

1 = A₁(3000)²/A₂(2000)²

A₁/A₂ = (2000)²/(3000)²

A₁/A₂ = 0.44

Work out the velocity v at the end of a rollercoaster ride (0). (rearrange the equation for KE to make velocity v the subject)
KE=1/2mv^2

Answers

Explanation:

If the kinetic energy of an object is given and we need to find its velocity of motion, then we can find it by using the formula of kinetic energy as :

[tex]K=\dfrac{1}{2}mv^2[/tex]

m is mass of the object

We can rearrange the above equation such that,

[tex]v=\sqrt{\dfrac{2K}{m}}[/tex]

Hence, this is the velocity at the end of a rollercoaster ride.

A type of friction that occurs when air pushes against a moving object causing it to negatively accelerate
a) surface area
b) air resistance
c) descent velocity
d) gravity

Answers

Answer:

Air resistance

Answer B is correct

Explanation:

The friction that occurs when air pushes against a moving object causing it to negatively accelerate is called as air resistance.

hope this helps

brainliest appreciated

good luck! have a nice day!

A projectile is defined as

Answers

Answer:

By definition, a projectile has a single force that acts upon it - the force of gravity.

Explanation:

A projectile is any object that once projected or dropped continues in motion by its own inertia and is influenced only by the downward force of gravity.

// have a great day //

Observe: Air pressure is equal to the weight of a column of air on a particular location. Airpressure is measured in millibars (mb). Note how the air pressure changes as you move StationB towards the center of the high-pressure system.
A. What do you notice?
B. Why do you think this is called a high-pressure system?

Answers

Answer:

a) When moving towards a high pressure center the pressure values ​​increase in the equipment

b) This area is called high prison since the weight of the atmosphere on top is maximum

Explanation:

A) A high atmospheric pressure system is an area where the pressure is increasing the maximum value is close to 107 Kpa, the other side as low pressure can have small values ​​85.5 kPa.

When moving towards a high pressure center the pressure values ​​increase in the equipment

B) This area is called high prison since the weight of the atmosphere on top is maximum

in general they are areas of good weather

A uniform thin spherical shell of mass M=2kg and radius R=0.23m is given an initial angular speed w=18.3rad/s when it is at the bottom of an inclined plane of height h=3.5m, as shown in the figure. The spherical shell rolls without slipping. Find wif the shell comes to rest at the top of the inclined plane. (Take g-9.81 m/s2, Ispherical shell = 2/3 MR2 ).Express your answer using one decimal place.

Answers

Answer:

47.8rad/s

Explanation:

For energy to be conserved.

The potential energy sustain by the object would be equal to K.E

P.E = m× g× h = 2 × 9.81× 3.5= 68.67J

Now K.E = 1/2 × I × (w1^2 - w0^2)

I = 2/3 × M × R2

= 2/3 × 2 × (0.23)^2= 0.0705

Hence

W1 = final angular velocity

Wo = initial angular velocity

From P.E = K.E we have;

68.67J = 1/2 × 0.0705 × (w1^2 - w0^2)

(w1^2 - w0^2) = 1948.09

W1^2 = 1948.09 + (18.3^2)

W1^2=2282.98

W1 = √2282.98

=47.78rad/s

= 47.8rad/s to 1 decimal place.

ASK YOUR TEACHER A meter stick is found to balance at the 49.7-cm mark when placed on a fulcrum. When a 51.5-gram mass is attached at the 16.0-cm mark, the fulcrum must be moved to the 39.2-cm mark for balance. What is the mass of the meter stick

Answers

Answer:

0.114 kg or 114 g

Explanation:

From the diagram attaches,

Taking the moment about the fulcrum,

sum of clockwise moment = sum of anticlockwise moment.

Wd = W'd'

Where W = weight of the mass, W' = weight of the meter rule, d = distance of the mass from the fulcrum, d' = distance of the meter rule.

make W'  the subject of the equation

W' = Wd/d'................ Equation 1

Given: W = mg = 0.0515(9.8) = 0.5047 N, d = (39.2-16) = 23.2 cm, d' = (49.7-39.2) = 10.5 cm

Substitute these values into equation 1

W' = 0.5047(23.2)/10.5

W' = 1.115 N.

But,

m' = W'/g

m' = 1.115/9.8

m' = 0.114 kg

m' = 114 g

determine the smallest mass of lead that when tied using a string to a wooden boat on a pond will be enough to sink the toy boat. assuming specific gravity of wood is 0.5 and density of water is 1000kg per cubic metre?​

Answers

The mass is going to be about 100m/s

A small rock with mass 0.12 kg is fastened to a massless string with length 0.80 m to form a pendulum. The pendulum is swinging so as to make a maximum angle of 45 ∘ with the vertical. Air resistance is negligible. Part A What is the speed of the rock when the string passes through the vertical position

Answers

Answer:

v = 3.33 m/s

Explanation:

In the position of 45 degrees, all the energy of the rock is gravitational, then we have:

E = m*g*L*cos(angle)

and in the vertical position of the string, all the energy is kinetic, so we have:

E = m*v^2/2

If there is no dissipation, both energies are equal, so we have:

m*g*L*cos(45) = m*v^2/2

9.81 * 0.8 * 0.7071 * 2 = v^2

v^2 = 11.0986

v = 3.33 m/s

An infinite sheet carries a uniform, positive charge per unit area. The electric field produced by the sheet is represented by parallel lines drawn with a density N lines per m2 that are perpendicular to and away from the sheet. The charge per unit area on the sheet is doubled. How should the density of the electric field lines be changed

Answers

Complete Question

An infinite sheet carries a uniform, positive charge per unit area. The electric field produced by the sheet is represented by parallel lines drawn with a density N lines per m2 that are perpendicular to and away from the sheet. The charge per unit area on the sheet is doubled. How should the density of the electric field lines be changed?

A It should stay the same

B  It should be quadrupled.

C It should be quintupled

D It should be doubled.

E It should be tripled

Answer:

Option D is the correct option

Explanation:

Generally electric field is mathematically represented as

        [tex]E = \frac{\sigma}{\epsilon_o}[/tex]

Where [tex]\sigma[/tex] is the charge per unit area (Charge density )

From the question we are told that [tex]\sigma[/tex] is doubled hence the

     [tex]E = \frac{2 \sigma }{\epsilon_o}[/tex]    

Looking the equation above we see that the value of the electric field will also double given that it is directly proportional to the charge density

A worker pushes on a crate that experiences a net force of 45.0 N. If it accelerates at 0.500 m/s2 what is the weight?

Answers

Answer:

882 N

Explanation:

F = ma

45.0 N = m (0.500 m/s²)

m = 90.0 kg

mg = 882 N

EASY! WILL REWARD BRAINLIEST!

Electrical current is defined as _____.

the capacity to store charge
the flow of electric charge per unit time
the amount of stored electric energy
the voltage of the battery

Answers

Electrical current is defined as the flow of electric charge per unit time.

what is the speed of light in quartz

Answers

Answer:

1.95 x 10^8 m/s.

Explanation:

Answer:

the answer is 1.95 x 10^8 m/s

Explanation:

g 95 N force exerted at the end of a 0.50 m long torque wrench gives rise to a torque of 15 N • m. What is the angle (assumed to be less than 90°) between the wrench handle and the direction of the applied force?

Answers

Answer:

Angle = 18.41°

Explanation:

Torque = F•r•sin θ

where;

F = force

r = distance from the rotation point

θ = the angle between the force and the radius vector.

We are given;

Torque = 15 N.m

F = 95 N

r = 0.5 m

Thus, plugging in the relevant values ;

15 = 95 × 0.5 × sin θ

sin θ = 15/(95 × 0.5)

sin θ = 0.3158

θ = sin^(-1)0.3158

θ = 18.41°

We say that the displacement of a particle is a vector quantity. Our best justification for this assertion is: A. a displacement is obviously not a scalar. B. displacement can be specified by a magnitude and a direction. C. operating with displacements according to the rules for manipulating vectors leads to results in agreement with experiments. D. displacement can be specified by three numbers. E. displacement is associated by motion.

Answers

Answer:

Option B - displacement can be specified by a magnitude and a direction.

Explanation:

A Vector quantity is defined as a physical quantity characterized by the presence of both magnitude as well as direction. Examples include displacement, force, torque, momentum, acceleration, velocity e.t.c

Whereas a scalar quantity is defined as a physical quantity which is specified with the magnitude or size alone. Examples include length, speed, work, mass, density, etc.

Displacement is the difference between the initial position and the final position of a body. Displacement is a vector quantity and not a scalar quantity because it can be described by using both magnitude as well as direction.

Looking at the options, the only one that truly justifies this definition is option B.

Two plates with area 7.00×10−3 m27.00×10−3 m2 are separated by a distance of 4.80×10−4 m4.80×10−4 m . If a charge of 5.40×10−8 C5.40×10−8 C is moved from one plate to the other, calculate the potential difference (voltage) between the two plates. Assume that the separation distance is small in comparison to the diameter of the plates.

Answers

Answer:

The voltage is  [tex]V = 418.60 \ Volts[/tex]  

Explanation:

From the question we are told that

    The area of the both plate is  [tex]A = 7.00 *10^{-3} \ m^2[/tex]

    The distance between the plate is [tex]d = 4.80*10^{-4}\ m[/tex]

     The magnitude of the charge is  [tex]q = 5.40 *10^{-8} \ C[/tex]

   

The capacitance of the capacitor that consist of the two plates is mathematically represented as

        [tex]C = \frac{\epsilon _o A}{d}[/tex]

Where [tex]\epsilon_o[/tex] is the permitivity of free space with a value  [tex]e = 8.85*10^{-12} \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

So

       [tex]C = \frac{8.85*10^{-12} * (7* 10^{-3})}{ 4.8*10^{-4}}[/tex]

        [tex]C = 1.29 *10^{-10} \ F[/tex]

The potential difference between the plate is mathematically represented as

      [tex]V = \frac{ Q}{C }[/tex]

     [tex]V = \frac{ 5.4*10^{-8}}{1.29 *10^{-10}}[/tex]

     [tex]V = 418.60 \ Volts[/tex]

   

Question 10
Air with a density of 1.20 kg/m3 flows through a 75.0 cm diameter pipe with a velocity of 2.00 m/s. What is the mass flow rate?

Answers

Answer:

75.0 cm

Explanation:

becouse i don,t no the right answer

state Ohm`s law as applied in electricity

Answers

Answer:

Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists. When spelled out, it means voltage = current x resistance, or volts = amps x ohms, or V = A x Ω.

A low C (f = 65Hz) is sounded on a piano. If the length of the piano wire is 2.0 m and its mass density is 5.0 g/m2, determine the tension of the wire.

Answers

Answer:

Tension of the wire(T) = 169 N

Explanation:

Given:

f = 65Hz

Length of the piano wire (L) = 2 m

Mass density = 5.0 g/m² = 0.005 kg/m²

Find:

Tension of the wire(T)

Computation:

f = v / λ

65 = v / 2L

65 = v /(2)(2)

v = 260 m/s

T = v² (m/l)

T = (260)²(0.005/2)

T = 169 N

Tension of the wire(T) = 169 N

Assuming 100% efficient energy conversion, how much water stored behind a 50 centimeter high hydroelectric dam would be required to charge the battery?

Answers

Complete question is;

Assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charge the battery with power rating, 12 V, 50 Ampere-minutes.

Answer:

Amount of water required to charge the battery = 7.35 m³

Explanation:

The formula for Potential energy of the water at that height = mgh

Where;

m = mass of the water

g = acceleration due to gravity = 9.8 m/s²

h = height of water = 50 cm = 0.5 m

We know that in density, m = ρV

Where;

ρ = density of water = 1000 kg/m³

V = volume of water

So, potential energy is now given as;

Potential energy = ρVgH = 1000 × V × 9.8 × 0.5 = (4900V) J

Now, formula for energy of the battery is given as;

E = qV

We are given;

q = 50 A.min = 50 × 60 = 3,000 C

V = 12 V

Thus;

qV = 3,000 × 12 = 36,000 J

E = 36,000 J

At a 100% conversion rate, the energy of the water totally powers the battery.

Thus;

(4900V) = (36,000)

4900V = 36,000

V = 36,000/4900

V = 7.35 m³

Other Questions
Will mark brainliest! Thanks ! and like if you can please explain it cuz I want to understand it to :) Computing investing cash flows Indicate the effect each separate transaction has on investing cash flows. (Amounts to be deducted should be indicated with a minus sign.) Sold a truck costing $48,000, with $25,200 of accumulated depreciation, for $11,200 cash. The sale results in a $11,600 loss. Sold a machine costing $13,800, with $9,600 of accumulated depreciation, for $8,200 cash. The sale results in a $4,000 gain. Purchased stock investments for $17,600 cash. The purchaser believes the stock is worth at least $33,200. to make the perfect shade of orange cake frosting, Mya needs 8 drops of yellow food coloring for every 12 drops of red food coloring. If she adds 32 drops of yellow food coloring to her frosting, how many drops of red food coloring should she add? Wax melts when it is heated which most likely describes what is true of the result of this reaction What idea in the Declaration of Independence reflects the influence of JohnLocke?A. Independence is only legitimate if a war is fought for it.B. A state should be represented in proportion to its population.C. Governments are a source of evil rather than good.D. Power comes from the consent of the governed. I need assistance :D, Instructions: Using the image, find the distance between the points given on the graph. Marx and Springsteen provides hair-cutting services in the local community. In February, the business cut the hair of 200 clients, earned $ 5,100 in revenues, and incurred the following operating costs:Hair saloon expense: $500Building rent expense: 1458Utilities expense: 200Depreciation expense--- Equipment: 50 Required:What was the cost of service to provide one haircut? Find the area of the following square.Write your answer in simplest form.Be sure to include the correct unit in your answer.4 1/2m General Mills began losing market share for Go-gurt when its biggest competitor began to focus on kids' yogurt. Which step of the market research process does this statement best correlate with?a. Analayzing datab. Data collectionc. Choosing the data collection methodd. Analyze and interpret the data A researcher reports that the farther college students are from their parents, the more often they communicate with their parents (either by phone or by e-mail). Is this an example of a positive correlation or a negative correlation? Several natural processes contribute to speciation, the development of newspecies. Which of these conditions is most likely to result in speciation?A. Genetic drift that occurs in two reproductively isolated populationsB. Genetic recombination in a small populationC. Genetic mutations that occur often in a large populationO D. Gene flow between two geographically isolated populationsSUBNIT If an economy with C = $5000 + 0.6Yd, I = $1000, G = $800, T = $1000, NX = $-200, where the dollar amounts are in millions of dollars, both government spending and taxes are raised by $200 million, what will be the change in equilibrium income (in millions)?A) $200B) $100C) $0 D) $-200E) None of the above Students who read more than four million words per year do better on standardized test than students who read less than one millionTrue or false Use Venn diagram notations to describe the shading of Which statement is true? 20 Points + Satisfaction of helping someone for this answer NEED HELPWhat is the temperature in kelvin of a gas if it is allowed to expand from 1.50 L to 4.50 L? The initial temperature is 10.0C and pressure is constant throughout the change. Which equation should you use? Glazing is a technique that requires:O A. thinning paint and applying many layers.B. preparing a canvas before painting.c. etching a surface before painting.D. an accurately proportioned composition. how does the ghost of christmas past act towards scrooge? If the perimeter of a rectangle picture frame must be less than 200 in and The width is 36 in what Must the height H of the frame be