Answer:
[tex]\large \boxed{42\, \mu \text{C}}$[/tex]
Explanation:
The formula for the force exerted between two charges is
[tex]F=k \dfrac{ q_1q_2}{r^2}[/tex]
where k is the Coulomb constant.
The charges are identical, so we can write the formula as
[tex]F=k\dfrac{q^{2}}{r^2}[/tex]
[tex]\begin{array}{rcl}\text{4.0 N}& = & 8.988 \times 10^{9}\text{ N$\cdot$m$^{2}$C$^{-2}$} \times \dfrac{q^{2}}{\text{(2.0 m)}^{2}}\\\\4.0 & = & 2.25 \times 10^{9}\text{ C$^{-2}$} \times q^{2}\\\\q^{2} & = & \dfrac{4.0}{2.25 \times 10^{9}\text{ C$^{-2}$}}\\\\& = & 1.78 \times 10^{-9} \text{ C}^{2}\\q & = & 4.2 \times 10^{-5} \text{ C}\\& = & 42\, \mu \text{C}\\\end{array}\\\text{Each charge has a value of $\large \boxed{\mathbf{42\, \mu }\textbf{C}}$}[/tex]
A kicked ball rolls across the grass and eventually comes to a stop in 4.0 sec. When the ball was kicked, its initial velocity was 20 mi/ hr. What is the acceleration of the ball as it rolls across the grass?
Answer:
-2.24 m/s²
Explanation:
Given:
v₀ = 20 mi/hr = 8.94 m/s
v = 0 m/s
t = 4.0 s
Find: a
v = v₀ + at
0 m/s = 8.94 m/s + a (4.0 s)
a = -2.24 m/s²
A rocket rises vertically, from rest, with an acceleration of 3.99 m/s2 until it runs out of fuel at an altitude of 775 m. After this point, its acceleration is due to gravity downwards. What is the speed of the rocket, in m/s, when it runs out of fuel?
Answer:
Vf = 78.64 m/s
Explanation:
The rocket is travelling upward at a constant acceleration of 3.99 m/s² until it runs out of fuel. So, in order to calculate its velocity at the point, where it runs out of fuel, we can simply use 3rd equation of motion:
2as = Vf² - Vi²
where,
a = acceleration = 3.99 m/s²
s = distance or height covered by rocket till fuel runs out = 775 m
Vf = Final Velocity = ?
Vi = Initial velocity = 0 m/s (Since, rocket starts from rest)
Therefore,
2(3.99 m/s²)(775 m) = Vf² - (0 m/s)²
Vf = √(6184.5 m²/s²)
Vf = 78.64 m/s
An aluminum wing on a passenger jet is 30 m long when its temperature is 27 C. At what temperature would the wing be 0.03 shorter?
Answer:2000
Explanation:
Some cats can be trained to jump from one location to another and perform other tricks. Kit the cat is going to jump through a hoop. He begins on a wicker cabinet at a height of 1.765 m above the floor and jumps through the center of a vertical hoop, reaching a peak height 3.130 m above the floor. (Assume the center of the hoop is at the peak height of the jump. Assume that +x axis is in the direction of the hoop from the cabinet and +y axis is up. Assume g = 9.81 m/s2.)
(a) With what initial velocity did Kit leave the cabinet if the hoop is at a horizontal distance of 1.560 m from the cabinet?
v_0 = m/s
(b) If Kit lands on a bed at a horizontal distance of 3.582 m from the cabinet, how high above the ground is the bed?
m
Answer:
a. the initial velocity of the cat is 5.95 m/s at 60.2° from the horizontal
b. 0.847 m
Explanation:
a. Using v² = u² + 2as, we find the initial vertical velocity of the cat. Now at the peak height, v = final velocity = 0, u = initial velocity and a = -g = 9.8 m/s², s vertical distance travelled by the cat from its position on the cabinet = Δy = 3.130 m - 1.765 m = 1.365 m.
Substituting these variables into the equation, we have
0² = u² + 2(-9.8m/s²) × 1.365 m
-u² = -26.754 m²/s²
u = √26.754 m²/s²
u = 5.17 m/s
To find its initial horizontal velocity, u₁ we first find the time t it takes to reach the peak height from
v = u + at. where the variables mean the same as above.
substituting the values, we have
0 = 5.17 m/s +(-9.8m/s²)t
-5.17 m/s = -9.8m/s²t
t = -5.17 m/s ÷ (-9.8m/s²)
= 0.53 s
Now, the horizontal distance d = u₁t = 1.560 m
u₁ = d/t = 1.560 m/0.53 s = 2.96 m/s
So, the initial velocity of the cat is V = √(u² + u₁²)
= √((5.17 m/s)² + (2.96 m/s)²)
= √(26.729(m/s)² + 8.762(m/s)²)
= √(35.491 (m/s)²)
= 5.95 m/s
its direction θ = tan⁻¹(5.17 m/s ÷ 2.96 m/s) = 60.2°
So, the initial velocity of the cat is 5.95 m/s at 60.2° from the horizontal
(b)
First, we find the time t' it takes the cat to land on the bed from d' = u₁t'
where d' = horizontal distance of cabinet from bed = 3.582 m
u₁ = horizontal velocity = 2.96 m/s
t' = d'/u₁
= 3.582 m/2.96 m/s
= 1.21 s
The vertical between the bed and cabinet which is the vertical distance moved by the cat is gotten from Δy = ut' +1/2at'²
substituting u = initial vertical velocity = 5.17 m/s, t' = 1.21 s and a = -g = -9.8 m/s² into Δy, we have
Δy = ut' +1/2at'² = 5.17 m/s × 1.21 s +1/2(- 9.8 m/s²) × (1.21 s)² = 6.256 - 7.174 = -0.918 m
Δy = y₂ - y₁
Since our initial position is the position of the cabinet above the ground = y₁ = 1.765 m
y₂ = position of bed above ground.
Δy = y₂ - y₁ = -0.918 m
y₂ - 1.765 m = -0.918 m
y₂ = 1.765 m - 0.918 m
= 0.847 m
small car has a head-on collision with a large truck. Which of the following statements concerning the magnitude of the average force due to the collision is correct? A small car has a head-on collision with a large truck. Which of the following statements concerning the magnitude of the average force due to the collision is correct? It is impossible to tell since the velocities are not given. The truck experiences the greater average force. It is impossible to tell since the masses are not given. The small car and the truck experience the same average force. The small car experiences the greater average force.
Answer:
The correct option is D: "The small car and the truck experience the same average force."
Explanation:
The magnitude of the average force experienced by both bodies in motion is the same as explained by Newton's third law of motion. The force exerted by each body is equal and opposite in direction. The resulting acceleration experienced by each vehicle, however, will not be the same. It is greater for the small car.
A large box containing your new computer sits on the bed of your pickup truck. You are stopped at a red light. When the light turns green, you stomp on the gas and the truck accelerates. To your horror, the box starts to slide toward the back of the truck. Draw clearly labeled free-body diagrams for the truck and for the box. Indicate pairs of forces, if any, that are third-law action–reaction pairs. (The horizontal truck bed is not frictionless.)
Answer:
The description of that same situation has been listed throughout the explanation segment below.
Explanation:
When another huge box or container containing your new machine or device sits on someone's pick-up truck's bed, the third low portion of the operation response force. This same friction force of the box mostly on the truck bed as well as the friction force including its truck bed on either the box from either the immune response pair.So that the above seems to be the right answer.
To study the properties of various particles, you can accelerate the particles with electric fields. A positron is a particle with the same mass as an electron but the opposite charge ( e). If a positron is accelerated by a constant electric field of magnitude 286 N/C, find the following.
(a) Find the acceleration of the positron. m/s2
(b) Find the positron's speed after 8.70 × 10-9 s. Assume that the positron started from rest. m/s
Answer:
a) a = 5.03x10¹³ m/s²
b) [tex]V_{f} = 4.4 \cdot 10^{5} m/s [/tex]
Explanation:
a) The acceleration of the positron can be found as follows:
[tex] F = q*E [/tex] (1)
Also,
[tex] F = ma [/tex] (2)
By entering equation (1) into (2), we have:
[tex] a = \frac{F}{m} = \frac{qE}{m} [/tex]
Where:
F: is the electric force
m: is the particle's mass = 9.1x10⁻³¹ kg
q: is the charge of the positron = 1.6x10⁻¹⁹ C
E: is the electric field = 286 N/C
[tex] a = \frac{qE}{m} = \frac{1.6 \cdot 10^{-19} C*286 N/C}{9.1 \cdot 10^{-31} kg} = 5.03 \cdot 10^{13} m/s^{2} [/tex]
b) The positron's speed can be calculated using the following equation:
[tex] V_{f} = V_{0} + at [/tex]
Where:
[tex]V_{f}[/tex]: is the final speed =?
[tex]V_{0}[/tex]: is the initial speed =0
t: is the time = 8.70x10⁻⁹ s
[tex] V_{f} = V_{0} + at = 0 + 5.03 \cdot 10^{13} m/s^{2}*8.70 \cdot 10^{-9} s = 4.4 \cdot 10^{5} m/s [/tex]
I hope it helps you!
a vector has components x=6 m and y=8 m. what is its magnitude and direction?
Answer: 10m
Explanation:
The magnitude of the vector would be 10
[tex]\sqrt{6^{2}+8^{2} } =10[/tex]
What percent of our solar system's mass is in the sun?
Answer:
99.8
Explanation:
most massive the sun is at the center of the universe
A ball is thrown upward from the ground with an initial speed of 19.2 m/s; at the same instant, another ball is dropped from a building 18 m high. After how long will the balls be at the same height above the ground?
Answer:
0.938 seconds
Explanation:
For the ball thrown upwards, we use the formula below to solve it:
[tex]s = ut - \frac{1}{2}gt^2[/tex]
where s = distance moved
u = initial speed = 19.2 m/s
t = time taken
g = acceleration due to gravity = 9.8 [tex]m/s^2[/tex]
Let x be the height at which both balls are level, this means that:
=> [tex]x = 19.2t - 4.9t^2[/tex]________(1)
For the ball dropped downwards, we use the formula below:
[tex]s = ut + \frac{1}{2}gt^2[/tex]
u = 0 m/s
At the point where both balls are level:
s = 18 - x
=> [tex]18 - x = 0 + 4.9t^2[/tex]
=> [tex]x = 18 - 4.9t^2[/tex]__________(2)
Equating both (1) and (2):
[tex]19.2t - 4.9t^2 = 18 - 4.9t^2\\\\=> 19.2t = 18\\\\t = 18/19.2 = 0.938 secs[/tex]
They will be level after 0.938 seconds
How many ohms of resistance are in a 120–volt hair dryer that draws 7.6 amps of current?
From Ohm's law . . . Resistance = (voltage) / (current)
Resistance = (120 volts) / (7.6 Amperes)
Resistance = 15.8 Ω
man stands on a platform that is rotating (without friction) with an angular speed of 1.2 rev/s; his arms are outstretched and he holds a brick in each hand.The rotational inertia of the system consisting of the man, bricks, and platform about the central vertical axis of the platform is 6.0 k g times m squared. If by moving the bricks the man decreases the rotational inertia of the system to 2.0 k g times m squared, what is the resulting angular speed of the platform in rad/s? Express to 3 sig figs.
Answer:
w₂ = 22.6 rad/s
Explanation:
This exercise the system is formed by platform, man and bricks; For this system, when the bricks are released, the forces are internal, so the kinetic moment is conserved.
Let's write the moment two moments
initial instant. Before releasing bricks
L₀ = I₁ w₁
final moment. After releasing the bricks
[tex]L_{f}[/tex] = I₂W₂
L₀ = L_{f}
I₁ w₁ = I₂ w₂
w₂ = I₁ / I₂ w₁
let's reduce the data to the SI system
w₁ = 1.2 rev / s (2π rad / 1rev) = 7.54 rad / s
let's calculate
w₂ = 6.0/2.0 7.54
w₂ = 22.6 rad/s
What is the minimum frequency with which a 200-turn, flat coil of cross sectional area 300 cm2 can be rotated in a uniform 30-mT magnetic field if the maximum value of the induced emf is to equal 8.0 V
Answer:
The minimum frequency of the coil is 7.1 Hz
Explanation:
Given;
number of turns, N = 200 turns
cross sectional area, A = 300 cm² = 300 x 10⁻⁴ m²
magnitude of magnetic field strength, B = 30 x 10⁻³ T
maximum value of the induced emf, E = 8 V
Maximum induced emf is given as;
E = NBAω
where
ω is angular velocity (ω = 2πf)
E = NBA2πf
where;
f is the minimum frequency, measured in hertz (Hz)
f = E / (NBA2π)
f = 8 / (200 x 30 x 10⁻³ x 300 x 10⁻⁴ x 2 x 3.142)
f = 7.073 Hz
f = 7.1 Hz
Therefore, the minimum frequency of the coil is 7.1 Hz
The minimum frequency of the coil in the case when it should be rotated in a uniform 30-mT magnetic field is 7.1 Hz.
Calculation of the minimum frequency:Since
number of turns, N = 200 turns
cross-sectional area, A = 300 cm² = 300 x 10⁻⁴ m²
the magnitude of magnetic field strength, B = 30 x 10⁻³ T
the maximum value of the induced emf, E = 8 V
Now
Maximum induced emf should be
E = NBAω
here,
ω is angular velocity (ω = 2πf)
Now
E = NBA2πf
here,
f is the minimum frequency
So,
f = E / (NBA2π)
f = 8 / (200 x 30 x 10⁻³ x 300 x 10⁻⁴ x 2 x 3.142)
f = 7.073 Hz
f = 7.1 Hz
Therefore, the minimum frequency of the coil is 7.1 Hz.
Learn more about frequency here: https://brainly.com/question/24470698
A ball with a mass of 275 g is dropped from rest, hits the floor and rebounds upward. If the ball hits the floor with a speed of 3.30 m/s and rebounds with a speed of 1.60 m/s, determine the following. (a) magnitude of the change in the ball's momentum in kg · m/s (Let up be in the positive direction.)
Answer:
[tex]\Delta p=1.3475\ kg-m/s[/tex]
Explanation:
The computation of magnitude of the change in the ball's momentum in kg · m/s is shown below:-
We represent
The ball mass = m = 275 g = 0.275 kg
Thus it goes to the floor and resurfaces upward.
The ball hits the ground at 3.30 m/s speed that is
u = -3.30 m/s which represents the Negative since the ball hits the ground)
It rebounds at a speed of 1.60 m / s i.e. v = 1.60 m/s (positive as the ball rebounds upstream)
[tex]\Delta p=p_f-p_i[/tex]
[tex]\Delta p=m(v-u)[/tex]
[tex]\Delta p=0.275\ kg(1.60\ m/s-(-3.30\ m/s))[/tex]
[tex]\Delta p=1.3475\ kg-m/s[/tex]
Representar con una escala de 1cm = 10N dos fuerzas que tengan igual dirección, distinto sentido y sus intensidades son de 40n y 60n, respectivamente.
Alguien que me lo hagaaaaaaa
Answer:
To solve this problem we just need to graph two forces with same direction, pointing to different sides with intensities of 40 N and 60 N.
The image attached shows these forces.
Notice that the vectors are parallel, that's because they have the same direction, but they point to different sides, and their magnitudes have a difference of 20 N.
The first antiparticle, the positron or antielectron, was discovered in 1932. It had been predicted by Paul Dirac in 1928, though the nature of the prediction was not fully understood until the experimental discovery. Today, it is well accepted that all fundamental particles have antiparticles.
Suppose that an electron and a positron collide head-on. Both have kinetic energy of 3.58 MeV and rest energy of 0.511 MeV. They produce two photons, which by conservation of momentum must have equal energy and move in opposite directions. What is the energy Eloton of one of these photons?
Answer:
4.09 MeV
Explanation:
Find the given attachment
A metal ring 4.60 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. These magnets produce an initial uniform field of 1.12 T between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.280 T/s.
A. What is the magnitude of the electric field induced in the ring?
B. In which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?1. Counterclockwise2. Clockwise
Answer:
A. Ein = 8.05*10^-4 V/m
B. Clockwise sense
Explanation:
A. the magnitude of the electric field induced in the ring is obtaind by using the following formula:
[tex]\int E_{in} \cdot ds=-\frac{d\Phi_B}{dt}[/tex] (1)
Ein: induced electric field
ds: differential of a path of the ring
ФB: magnetic flux in the ring
The Ein vector is parallel to ds in the complete ring. Furthermore, the area of the ring is constant, hence, you have in the equation (1):
[tex]\int E_{in}ds=E_{in}(2\pi r)=-A\frac{dB}{dt}\\\\E_{in}=-\frac{A}{2\pi r}\frac{dB}{dt}[/tex] (2)
dB/dt = -0.280T/s (it is decreasing)
A: area of the ring = π(r/2)^2= (π/4) r^2
r: radius of the ring = 4.60/2 = 2.30 cm
Then, you replace the values of all variables in the equation (2):
[tex]E_{in}=-\frac{(\pi/4)r^2}{2\pi r}\frac{dB}{dt}=\frac{r}{8}\frac{dB}{dt}\\\\E_{in}=-\frac{0.0230m}{8}(-0.280T)=8.05*10^{-4}\frac{V}{m}[/tex]
hence, the induced electric field is 8.05*10^-4 V/m
B. The induced current in the ring produced a magnetic field that is opposite to the magnetic field of the magnet. The, in this case you have that the induced current is in a clockwise sense.
Calculate the maximum deceleration (in m/s2) of a car that is heading down a 14° slope (one that makes an angle of 14° with the horizontal) under the following road conditions. You may assume that the weight of the car is evenly distributed on all four tires and that the static coefficient of friction is involved—that is, the tires are not allowed to slip during the deceleration.
The question is incomplete. Here is the complete question.
Calculate the maximum deceleration of a car that is heading down a 14° slope (one that makes an anlge of 14° with the horizontal) under the following road conditions. You may assum that the weight of the car is evenlydistributed on all four tires and that the sttic coefficient of friction is involved - that is, the tires are not allowed to slip during the deceleration. (Ignore rolling) Calculate for a car: (a) On a dry concrete. (b) On a wet concrete. (c) On ice, assuming that μs = 0.100, the same as for shoes on ice.
Answer: (a) a = - 11.05 m/s²; (b) a = - 10.64 m/s²; (c) a = - 9.84m/s²
Explanation: The image in the attachment describe the forces acting on the car. Observing that, we know that:
[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]
The [tex]W_x[/tex] is a x-component of force due to gravity (W) and, in this case, is given by: [tex]W_x[/tex] = W.sin(14)
W is described as: W = m.g
Force due to friction ([tex]f_s[/tex]) is given by: [tex]f_s[/tex] = μs.N
N is the normal force and, in the system, is equivalent of [tex]W_y[/tex], so:
[tex]W_y[/tex] = m.g.cos(14)
Therefore, the formula will be:
[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]
m.a = - (m.g.sin14) - (μs.mg.cos14)
a = - g (sin14 + μscos 14)
a) For dry concrete, μs = 1:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin14 + 1.cos14)
a = - 11.05 m/s²
b) For wet concrete, μs = 0.7:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin 14 + 0.7.cos14)
a = - 10.64 m/s²
c) For ice, μs = 0.1:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin14 + 0.1cos14)
a = - 9.84 m/s²
Richard is driving home to visit his parents. 150 mi of the trip are on the interstate highway where the speed limit is 65 mph . Normally Richard drives at the speed limit, but today he is running late and decides to take his chances by driving at 80 mph. How many minutes does he save?
Answer:
t = 25.5 min
Explanation:
To know how many minutes does Richard save, you first calculate the time that Richard takes with both velocities v1 = 65mph and v2 = 80mph.
[tex]t_1=\frac{x}{v_1}=\frac{150mi}{65mph}=2.30h\\\\t_2=\frac{x}{v_2}=\frac{150mi}{80mph}=1.875h[/tex]
Next, you calculate the difference between both times t1 and t2:
[tex]\Delta t=t_1-t_2=2.30h-1.875h=0.425h[/tex]
This is the time that Richard saves when he drives with a speed of 80mph. Finally, you convert the result to minutes:
[tex]0.425h*\frac{60min}{1h}=25.5min=25\ min\ \ 30 s[/tex]
hence, Richard saves 25.5 min (25 min and 30 s) when he drives with a speed of 80mph
N capacitors are connected in parallel to form a "capacitor circuit". The capacitance of first capacitor is C, second one is C/2 and third one is C/4, forth one is C/8 and so on. Namely, capacitance of a capacitor is one-half of the previous one. What is the equivalent capacitance of this parallel combination when N goes to inifinity?
Answer:
2C
Explanation:
The equivalent capacitance of a parallel combination of capacitors is the sum of their capacitance.
So, if the capacitance of each capacitor is half the previous one, we have a geometric series with first term = C and rate = 0.5.
Using the formula for the sum of the infinite terms of a geometric series, we have:
Sum = First term / (1 - rate)
Sum = C / (1 - 0.5)
Sum = C / 0.5 = 2C
So the equivalent capacitance of this parallel connection is 2C.
If the velocity of a runner changes from -2 m/s to -4 m/s over a period of time, the
runner's kinetic energy will become:
(a) four times as great as it was.
(b) half the magnitude it was.
(c) energy is conserved.
(d) twice as great as it was.
(e) four times less than it was.
Answer:
It will be A. So since its 2 times more the kinetic energy. But then you have to square it 2^2 = 4
pls what is the difference between Ac power and dc power
Answer:
The difference between AC and DC lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a single direction, or "forward." In AC, electrons keep switching directions, sometimes going "forward" and then going "backward."
Q) A particle in simple harmonic motion starts its motion from its mean position. If T be the time period, calculate the ratio of kinetic energy and potential energy of the particle at the instant when t = T/12.
t\12 and the parties are spreading ever
Explanation:
my point is that you can get sick if
you sont wash your ha
nds or be
save
1. Which of the following is NOT a vector quantity? (a) Displacement. (b) Energy. (c) Force. (d) Momentum. (e) Velocity.
Answer:
B. energy
Explanation:
A vector has direction.
Energy does not have a direction.
A car traveling on a flat (unbanked), circular track accelerates uniformly from rest with a tangential acceleration of 1.90 m/s2. The car makes it one quarter of the way around the circle before it skids off the track. From these data, determine the coefficient of static friction between the car and track.
Required:
Determine the coefficient of static friction between the car and the track.
Answer:
Approximately [tex]0.608[/tex] (assuming that [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex].)
Explanation:
The question provided very little information about this motion. Therefore, replace these quantities with letters. These unknown quantities should not appear in the conclusion if this question is actually solvable.
Let [tex]m[/tex] represent the mass of this car.Let [tex]r[/tex] represent the radius of the circular track.This answer will approach this question in two steps:
Step one: determine the centripetal force when the car is about to skid.Step two: calculate the coefficient of static friction.For simplicity, let [tex]a_{T}[/tex] represent the tangential acceleration ([tex]1.90\; \rm m \cdot s^{-2}[/tex]) of this car.
Centripetal Force when the car is about to skidThe question gave no information about the distance that the car has travelled before it skidded. However, information about the angular displacement is indeed available: the car travelled (without skidding) one-quarter of a circle, which corresponds to [tex]90^\circ[/tex] or [tex]\displaystyle \frac{\pi}{2}[/tex] radians.
The angular acceleration of this car can be found as [tex]\displaystyle \alpha = \frac{a_{T}}{r}[/tex]. ([tex]a_T[/tex] is the tangential acceleration of the car, and [tex]r[/tex] is the radius of this circular track.)
Consider the SUVAT equation that relates initial and final (tangential) velocity ([tex]u[/tex] and [tex]v[/tex]) to (tangential) acceleration [tex]a_{T}[/tex] and displacement [tex]x[/tex]:
[tex]v^2 - u^2 = 2\, a_{T}\cdot x[/tex].
The idea is to solve for the final angular velocity using the angular analogy of that equation:
[tex]\left(\omega(\text{final})\right)^2 - \left(\omega(\text{initial})\right)^2 = 2\, \alpha\, \theta[/tex].
In this equation, [tex]\theta[/tex] represents angular displacement. For this motion in particular:
[tex]\omega(\text{initial}) = 0[/tex] since the car was initially not moving.[tex]\theta = \displaystyle \frac{\pi}{2}[/tex] since the car travelled one-quarter of the circle.Solve this equation for [tex]\omega(\text{final})[/tex] in terms of [tex]a_T[/tex] and [tex]r[/tex]:
[tex]\begin{aligned}\omega(\text{final}) &= \sqrt{2\cdot \frac{a_T}{r} \cdot \frac{\pi}{2}} = \sqrt{\frac{\pi\, a_T}{r}}\end{aligned}[/tex].
Let [tex]m[/tex] represent the mass of this car. The centripetal force at this moment would be:
[tex]\begin{aligned}F_C &= m\, \omega^2\, r \\ &=m\cdot \left(\frac{\pi\, a_T}{r}\right)\cdot r = \pi\, m\, a_T\end{aligned}[/tex].
Coefficient of static friction between the car and the trackSince the track is flat (not banked,) the only force on the car in the horizontal direction would be the static friction between the tires and the track. Also, the size of the normal force on the car should be equal to its weight, [tex]m\, g[/tex].
Note that even if the size of the normal force does not change, the size of the static friction between the surfaces can vary. However, when the car is just about to skid, the centripetal force at that very moment should be equal to the maximum static friction between these surfaces. It is the largest-possible static friction that depends on the coefficient of static friction.
Let [tex]\mu_s[/tex] denote the coefficient of static friction. The size of the largest-possible static friction between the car and the track would be:
[tex]F(\text{static, max}) = \mu_s\, N = \mu_s\, m\, g[/tex].
The size of this force should be equal to that of the centripetal force when the car is about to skid:
[tex]\mu_s\, m\, g = \pi\, m\, a_{T}[/tex].
Solve this equation for [tex]\mu_s[/tex]:
[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g}[/tex].
Indeed, the expression for [tex]\mu_s[/tex] does not include any unknown letter. Let [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex]. Evaluate this expression for [tex]a_T = 1.90\;\rm m \cdot s^{-2}[/tex]:
[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g} \approx 0.608[/tex].
(Three significant figures.)
World religions: Shinto
Most Shinto rituals are tied to
A) worshiping the kami.
B) the life-cycle of humans and the seasonal cycles of nature.
C) forgiveness of sins.
D) preparing for the afterlife.
Davina accelerates a box across a smooth frictionless horizontal surface over a displacement of 18.0 m with a constant 25.0 N force angled at 23.0° below the horizontal. How much work does she do on the box? A. 176 J B. 414 J C. 450 J D. 511 J Group of answer choices
Answer:
W = 414 J, correct is B
Explanation:
Work is defined by
W = ∫ F .dx
where F is the force, x is the displacement and the point represents the dot product
this expression can also be written with the explicit scalar product
W = ∫ F dx cos θ
where is the angle between force and displacement
for this case as the force is constant
W = F x cos θ
calculate
W = 25.0 18.0 cos (-23)
W = 414 J
the correct answer is B
On a brisk walk, a person burns about 331 Cal/h. If the brisk walk were done at 3.0 mi/h, how far would a person have to walk
to burn off 1 lb of body fat? (A pound of body fat stores an amount of chemical energy equivalent to 3,500 Cal.)
mi?
Answer:
32mi
Explanation:
If 1lb contains 3,500 Cal
It means the number of hours required to burn 3500cal would be;
3500/331 = 10.57hours
But a brisk walk is 3.0 mi/h,
It means a distance of 3.0 × 10.57 mi would be covered = 31.71 miles
32miles{ approximated to the nearest whole}
Note Distance = speed × time
A man pushes a 25kg box up an incline 2.0m by applying a steady force of 95N parallel to the incline. The box moves up the incline at a steady speed. The incline makes an angle 15 degrees to the horizontal
a) What is the force of friction between the incline and the box
b)If the box is released at the top of the incline, what will its speed be at the bottom
Answer:
a) Ff = 19.29 N
b) v = 3.00 m/s
Explanation:
a) To calculate the friction force you use the second Newton Law in the incline plane, with an acceleration equal to zero, because the motion of the box has a constant velocity:
[tex]F-F_f-Wsin(\theta)=0\\\\[/tex] (1)
F: force applied by the man = 95N
Ff: friction force
W: weight of the box = Mg = (25kg)(9.8m/s^2) = 245N
θ: degree of the inclined plane = 15°
You solve the equation (1) for Ff and you replace the values of all variables in the equation (1):
[tex]F_f=-Wsin(\theta)+F\\\\F_f=-(245N)sin18\°+95N=19.29N[/tex]
b) To fins the velocity of the box at the bottom you use the following formula:
[tex]W_N=\Delta K[/tex] (2)
That is, the net work over the box is equal to the change in the kinetic energy of the box.
The net work is:
[tex]W_N=Mgsin(18\°)d-Ffd[/tex]
d: distance traveled by the box = 2.0m
[tex]W_N=245sin18\°(2.0m)N-19.29(2.0m)N=112.83J[/tex]
You use this value of the net work to find the final velocity of the box, by using the equation (2):
[tex]112.8J=\frac{1}{2}m[v^2-v_o^2]\\\\v_o=0m/s\\\\v=\sqrt{\frac{2(112.8J)}{m}}=\sqrt{\frac{225.67J}{25kg}}=3.00\frac{m}{s}[/tex]
The speed of the box, at the bottom of the incline plane is 3.00 m/s
I really need help with this question someone plz help !
Answer:weight
Explanation:weight
