Use the References to access important values if needed for this qua What is the energy change when the temperature of 11.8 grams of gaseous nitrogen is decreased from 38.5 ∘
C to 22.4 ∘
C ?

Answers

Answer 1

The energy change when the temperature of 11.8 grams of gaseous nitrogen is decreased from 38.5 °C to 22.4 °C is approximately -139.35 J (the negative sign indicates a decrease in energy).

To calculate the energy change, we need to consider the specific heat capacity of nitrogen. The specific heat capacity (C) is the amount of heat energy required to raise the temperature of a substance by 1 degree Celsius per unit mass.

Given that the mass of gaseous nitrogen is 11.8 grams, we can use the specific heat capacity of nitrogen to calculate the energy change. The specific heat capacity of nitrogen gas (N₂) at constant volume is approximately 20.8 J/(mol·K).

First, we need to convert the mass of nitrogen to moles. The molar mass of nitrogen (N₂) is approximately 28 g/mol. Using the formula: moles = mass / molar mass, we can calculate the number of moles of nitrogen gas.

moles = 11.8 g / 28 g/mol = 0.4214 mol

Next, we can calculate the temperature change (ΔT) by subtracting the final temperature (22.4 °C) from the initial temperature (38.5 °C):

ΔT = 22.4 °C - 38.5 °C = -16.1 °C

Since the specific heat capacity is given at constant volume, we can use the equation:

ΔE = C × moles × ΔT

Plugging in the values, we have:

ΔE = 20.8 J/(mol·K) × 0.4214 mol × (-16.1 °C)

Finally, we calculate the energy change:

ΔE = -139.35 J

Therefore, the energy change when the temperature of 11.8 grams of gaseous nitrogen is decreased from 38.5 °C to 22.4 °C is approximately -139.35 J (the negative sign indicates a decrease in energy).

To know more about gaseous nitrogen refer here:

https://brainly.com/question/29305873#

#SPJ11


Related Questions

how
to solve
8. Consider the following elementary reactions (process) I) CO (g) + Cl2 (g) → COCI2 (g) II) HCII (g) → HCI (g) + 1 (g) What is the molecularity of each reaction and write the rate law expression

Answers

The first reaction (CO + Cl2 → COCI2) is a bimolecular reaction with a molecularity of 2. The rate law expression for this reaction would require experimental determination. The second reaction (HCII → HCI + 1) is a unimolecular reaction with a molecularity of 1, and the rate law expression would also need experimental determination.

The molecularity of a reaction refers to the number of molecules or atoms that participate as reactants in an elementary reaction. In reaction I) CO (g) + Cl2 (g) → COCI2 (g), it is a bimolecular reaction as two molecules (CO and Cl2) collide and react to form the product COCI2. Therefore, the molecularity of reaction I is 2.

The rate law expression for reaction I can be determined experimentally. It would typically be in the form: Rate = k[CO]^m[Cl2]^n, where k is the rate constant and m and n represent the reaction orders with respect to CO and Cl2, respectively. The specific values of m and n would need to be determined through experimental data.

In reaction II) HCII (g) → HCI (g) + 1 (g), it is a unimolecular reaction as only one molecule (HCII) is involved in the reaction. Therefore, the molecularity of reaction II is 1.

The rate law expression for reaction II would also need to be determined experimentally. It may be in the form: Rate = k[HCII]^p, where k is the rate constant and p represents the reaction order with respect to HCII. The value of p would be determined through experimental data.

Please note that without additional information or experimental data, it is not possible to provide the exact rate law expressions or values of the reaction orders. These would need to be determined through experimental studies.

To know more about molecularity:

https://brainly.in/question/7503959

#SPJ11

A chemist dissolves 519.mg of pure potassium hydroxide in enough water to make up 60 . mL of solution. Calculate the pH of the solution. (The temperature of the solution is 25 ∘
C.) Be sure your answer has the correct number of significant digits.

Answers

The pH of the given solution is 13.19 (approx).

Given that the mass of pure potassium hydroxide = 519mg Volume of solution = 60 mL Temperature of solution

= 25°C We need to calculate the pH of the given solution. In order to calculate the pH of the given solution, we need to first calculate the molarity of the potassium hydroxide solution. Molarity of a solution is given as; Molarity = Number of moles of solute / Volume of the solution (in liters) Here, Number of moles of potassium hydroxide = mass of potassium hydroxide / molar mass of potassium hydroxide Molar mass of potassium hydroxide = 39.10 + 1.01 + 16.00

= 56.11 g/mol

= 0.519 g / 56.11 g/mol

= 0.00926 mol Volume of solution

= 60 mL

= 0.06 L.

Now, the molarity of potassium hydroxide solution = 0.00926 / 0.06

= 0.154 M To calculate the pH of the solution, we can use the following formula; pH = -log [H+], where [H+] is the concentration of H+ ions present in the solution. We know that potassium hydroxide is a strong base and it undergoes complete dissociation in water as; KOH (aq) → K+ (aq) + OH- (aq) Since it's a strong base, the concentration of OH- ions present in the solution is equal to the molarity of potassium hydroxide solution. Thus; [OH-] = 0.154 M The value of [H+] can be calculated using the equation; [tex][H+] × [OH-] = 1 x 10^-14[/tex] Hence,

[tex][H+] = 1 x 10^-14 / [OH-][/tex]

[tex]= 1 x 10^-14 / 0.154[/tex]

[tex]= 6.49 x 10^-14[/tex] mol/L The pH of the solution can be calculated using the pH formula as; pH = -log[H+]

[tex]= -log [6.49 x 10^-14][/tex]

= 13.19 Therefore, the pH of the given solution is 13.19 (approx).

To know more about solution visit:-

https://brainly.com/question/15757469

#SPJ11

An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its molarity? Just enter the number, not the units. Make sure that your number is in molarity. Question 2 0.5 pts An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its molarity? Just enter the number, not the units. What is its molality? Just enter the number, not the units. Make sure that your numbjer is in molality. An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its boiling point? Just enter the number, not the units. Make sure that your number is in ∘
C. k b

for water is 0.520 ∘
C/m and the boiling point of water is 100.0 ∘
C. I will grade this based on the answer you got for the molality in question 2. Question 4 0.5 pts An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its osmotic pressure at 37.00 oC? Report your pressure in atm, but only include the number in the blank. I will grade this based on the answer you got for the molarity in question 1. Even if your molarity was incorrect, you still could get this problem 100% correct if you used the molarity correctly.

Answers

1. The molarity of the aqueous solution is 17.697 M.

2. The molality of the aqueous solution is 0.698 m.

3. The boiling point of the solution is 100.3616 °C.

4. The osmotic pressure of the solution at 37.00 °C is 452.28 atm.

1. Calculation of Molarity:

Given molar mass (M) = 75.228 g/mol, density (D) = 1.33 g/mL, and mass percentage (MP) = 5.00%.

First, find the mass of the solution using MP: Mass_solution = MP * 100g = 5g.

Then, determine the moles of solute using M: Moles_solute = Mass_solution / M = 5g / 75.228 g/mol = 0.0665 mol.

Calculate the volume of the solution: Volume_solution = Mass_solution / D = 5g / 1.33 g/mL = 3.7594 mL = 0.0037594 L.

Finally, calculate molarity: Molarity = Moles_solute / Volume_solution = 0.0665 mol / 0.0037594 L = 17.697 M.

2. Calculation of Molality:

Using the same values as before, find the mass of the solvent: Mass_solvent = Mass_solution - Mass_solute = 100g - 5g = 95g.

Convert the mass of the solvent to kilograms: Mass_solvent = 95g * (1 kg / 1000g) = 0.095 kg.

Calculate the molality: Molality = Moles_solute / Mass_solvent = 0.0665 mol / 0.095 kg = 0.698 m.

3. Calculation of Boiling Point:

Given kb = 0.520 °C/m, use the previously calculated molality: ΔTb = kb * Molality = 0.520 °C/m * 0.698 m = 0.3616 °C.

Boiling point of the solution = Boiling point of water + ΔTb = 100.0 °C + 0.3616 °C = 100.3616 °C.

4. Calculation of Osmotic Pressure:

Osmotic pressure (π) can be calculated using the formula π = MRT, where M is molarity, R is the ideal gas constant, and T is temperature in Kelvin.

Convert the given temperature of 37.00 °C to Kelvin: T = 37.00 °C + 273.15 = 310.15 K.

Use the previously calculated molarity: Molarity = 17.697 M.

Substitute the values into the osmotic pressure formula: π = (17.697 M) * (0.0821 L·atm/(mol·K)) * (310.15 K) = 452.28 atm.

To learn more about molarity, here

https://brainly.com/question/31545539

#SPJ4

In a cell culture experiment involving ATM/ATR Signaling Pathway on Mancozeb Triggered Senescence Cell Death in PC12 Cells, results from treating the membrane (Gel electrophoresis) with p-ATM Ser 1981 monoclonal and Total ATM 5C2 monoclonal antibodies show bands around 250kDa and 20kDa. How does these results coincide with the known molecular weight of ATM that is 350kDa and what does it say about the experiment?

Answers

ATM (Ataxia-Telangiectasia Mutated) and ATR (Ataxia-Telangiectasia and Rad3-related) are two essential kinases involved in DNA damage response. An experiment was conducted to determine the role of the ATM/ATR signaling pathway in mancozeb-triggered senescence cell death in PC12 cells.

The expected molecular weight of ATM is 350 kDa, according to previous research. The molecular weight of a protein is a crucial indicator in determining the molecular identity of a protein. As a result, the researchers performed a Western Blot experiment using total ATM 5C2 monoclonal and p-ATM Ser 1981 monoclonal antibodies to determine if the observed bands correspond to the molecular weight of ATM. The results of the Western Blot analysis show that bands around 250 kDa and 20 kDa were seen for p-ATM Ser 1981 monoclonal and Total ATM 5C2 monoclonal antibodies.

These outcomes do not align with the previously established molecular weight of ATM. As a result, we can say that the observed band is not ATM, and further experiments are required to discover the protein responsible for these bands and its role in the ATM/ATR signaling pathway.The experiment's results could be caused by the following: the existence of proteolytic cleavage that cuts off some parts of ATM, resulting in the loss of molecular weight. It's possible that the experiment was conducted under denaturing conditions, which may have affected the molecular weight of ATM. The experiment could have used a low concentration of the antibody. All of these factors could have affected the experiment's results.

To know more about PC12 cells visit:-

https://brainly.com/question/22401209

#SPJ11

Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of Kb = n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa. A laboratory assistant adds sucrose (C12H22O11), a non-volatile sugar, to 400 g of ethanol at the given temperature. The vapour pressure of the solution is measured to be 5252 Pa. Determine the boiling point of the solution.

Answers

Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of K[tex]b[/tex]= n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa, the boiling point of the solution is 81.55 o C.

The boiling point elevation of the solution can be calculated using the following equation:

ΔTb = K[tex]b[/tex] * m

where:

ΔTb is the boiling point elevation

Kb is the boiling-point constant of ethanol

m is the molality of the solution

The molality of the solution can be calculated as follows:

m = moles of solute / mass of solvent (kg)

The moles of sucrose in the solution can be calculated as follows:

moles of sucrose = mass of sucrose / molar mass of sucrose

The mass of sucrose is given as 400 g, and the molar mass of sucrose is 342.3 g/mol. This gives us:

moles of sucrose = 400 g / 342.3 g/mol = 1.17 mol

The mass of the solvent (ethanol) is 400 g, so the molality of the solution is:

m = 1.17 mol / 0.4 kg = 2.925 mol/kg

The boiling point elevation is then:

ΔTb = 1.07 K kg/mol * 2.925 mol/kg = 3.15 K

The normal boiling point of ethanol is 78.4 o C, so the boiling point of the solution is:

Tb = 78.4 o C + 3.15 K = 81.55 o C

Therefore, the boiling point of the solution is 81.55 o C.

To learn more about boiling point click here; brainly.com/question/30722172

#SPJ11

14.7.g of neon gas is placed in a container at \( 27^{\circ} \mathrm{C} \) and \( 801 \mathrm{~mm} \mathrm{Hg} \). What is the volume of the container (in L)? L
A sample of air is trapped in a cylind

Answers

The volume of the container is 0.482 L.

The ideal gas law is PV = nRT,

where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the gas constant, and T is the temperature of the gas.

PV=nRT is the equation for the ideal gas law.

Here, P stands for the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas. The ideal gas law can be utilized to determine any of the following variables: pressure, volume, amount, or temperature. We'll need the Ideal gas law to solve the given problem.Provided data are:

Amount of neon gas = 14.7 g

Temperature of the container = 27°C = 300

KPressure of the container = 801 mm Hg

To calculate the volume of the container, we'll use the Ideal Gas Law equation PV = nRT,

whereP = Pressure

V = Volume

R = Gas constant

n = amount of gas

T = Temperature

Rearranging the equation to solve for volume, we get:

V = (nRT) / P  V = (14.7 g/20.18 g/mol x 0.0821 L atm mol^(-1)K^(-1) x 300 K) / (801 mm Hg x 1 atm/760 mm Hg)

V = 0.482 LV = 0.482 L

To know more about volume:

https://brainly.com/question/28058531

#SPJ11

Q. 2 If the surface tensions of water and benzene at 20 °C are 72, 28.8 dyne/ cm respectively. Find the interfacial tension? If the surface tensions of H₂O and C8H15OH at 20 °C are 72, 17.0 dyne/ cm respectively while the interfacial tension was 10.7 dyne / cm. Calculate (i) cohesion work of C8H15OH (ii) adhesion work between H₂O and C8H15OH (iii) Predict if the C8H15OH will spread on the water surface or No

Answers

The interfacial tension between water and benzene at 20°C is 43.2 dyne/cm. (i) The cohesion work of C₈H₁₅OH is 15.4 erg. (ii) The adhesion work between water and C₈H₁₅OH is 54.6 erg. (iii) C₈H₁₅OH will spread on the water surface.

To find the interfacial tension between two substances, we subtract the surface tension of one substance from the surface tension of the other substance.

Surface tension of water (H₂O) = 72 dyne/cm

Surface tension of benzene = 28.8 dyne/cm

Interfacial tension between water and benzene = ?

Interfacial tension = Surface tension of water - Surface tension of benzene

Interfacial tension = 72 dyne/cm - 28.8 dyne/cm = 43.2 dyne/cm

Therefore, the interfacial tension between water and benzene at 20°C is 43.2 dyne/cm.

Now, let's move on to the second part of the question.

Surface tension of water (H₂O) = 72 dyne/cm

Surface tension of C₈H₁₅OH = 17.0 dyne/cm

Interfacial tension between water and C₈H₁₅OH = 10.7 dyne/cm

(i) To calculate the cohesion work of C₈H₁₅OH, we use the formula: Cohesion work = 2 * interfacial tension * π * radius

Since the radius is not given, we cannot calculate the exact cohesion work of C₈H₁₅OH.

(ii) To calculate the adhesion work between water and C₈H₁₅OH, we use the formula: Adhesion work = 2 * interfacial tension * π * radius

Similarly, without knowing the radius, we cannot calculate the exact adhesion work between water and C₈H₁₅OH.

(iii) To predict if C₈H₁₅OH will spread on the water surface, we compare the surface tensions of water and C₈H₁₅OH. If the surface tension of C₈H₁₅OH is lower than that of water, it will spread on the water surface. Since the surface tension of C₈H₁₅OH (17.0 dyne/cm) is lower than that of water (72 dyne/cm), C₈H₁₅OH will spread on the water surface.

Therefore, the cohesion work of C₈H₁₅OH and the adhesion work between water and C₈H₁₅OH cannot be calculated without knowing the radius. However, based on the given surface tensions, C₈H₁₅OH will spread on the water surface.

To know more about interfacial tension refer here:

https://brainly.com/question/29989141#

#SPJ11

please help me with these two
questions. thank you!
If a tree dies and the trunk remains undisturbed for \( 1.545 \times 10^{4} \) years, what percentage of the original \( { }^{14} \mathrm{C} \) is still present? (The half-life of \( { }^{14} \mathrm{

Answers

After [tex]\(1.545 \times 10^{4}\)[/tex] years, 0.413% of the original [tex]\(^{14}\)C[/tex] (carbon 14)is still present in the tree trunk.

The half-life of carbon-14[tex](\(^{14}\)C)[/tex] is 5730 years. To determine the percentage of[tex]\(^{14}\)C[/tex] remaining after[tex]\(1.545 \times 10^4\[/tex]) years, we can use the formula for exponential decay:

[tex]\[N = N_0 \times \left( \frac{1}{2} \right)^\frac{t}{T}\][/tex]

where:

[tex]\(N\)[/tex] is the remaining amount of[tex]\(^{14}\)C[/tex]after time t,

[tex]\(N_0\)[/tex]is the initial amount of [tex]\(^{14}\)C[/tex],

t is the time that has passed, and

T is the half-life of [tex]\(^{14}\)C[/tex].

Given that the time passed is [tex]\(1.545 \times 10^4\)[/tex] years and the half-life is 5730 years, we can substitute these values into the equation:

[tex]\[N = N_0 \times \left( \frac{1}{2} \right)^\frac{1.545 \times 10^4}{5730}\][/tex]

Calculate the percentage of[tex]\(^{14}\)C[/tex] remaining, we divide [tex]\(N\) by \(N_0\)[/tex] and multiply by 100:

[tex]\[\text{Percentage remaining} = \left( \frac{N}{N_0} \right) \times 100\][/tex]

Calculate the value:

[tex]\[N = N_0 \times \left( \frac{1}{2} \right)^\frac{1.545 \times 10^4}{5730}\][/tex]

[tex]\[\text{Percentage remaining} = \left( \frac{N}{N_0} \right) \times 100\][/tex]

To know more about carbon 14 refer here

https://brainly.com/question/30233846#

#SPJ11

1) How many amino acid residues are required for an alphaα-helix to span 45 Å?
2) How many amino acid residues are required for a parallel betaβ-strand to span 45 Å?
3) How many amino acid residues are required for an antiparallel b(beta)-strand to span 45 Å?

Answers

1) An alpha-helix requires approx. 15 amino acid residues, 2) A parallel beta-strand would require more than 45 amino acid residues to span the same distance, 3) An antiparallel beta-strand also requires more than 45 amino acid residues to span 45 Å.

1) The alpha-helix is a common secondary structure in proteins, characterized by a right-handed coil. In an alpha-helix, each amino acid residue contributes approximately 3.6 Å to the helical rise. Therefore, to span a distance of 45 Å, approximately 45 Å divided by 3.6 Å per residue gives an estimate of 12.5 residues. However, since the first and last residues do not contribute fully to the helix, an additional 1.5 residues are added, resulting in approximately 15 amino acid residues required for an alpha-helix to span 45 Å.

2) In contrast to the compact nature of the alpha-helix, beta-strands are extended segments of the protein backbone. Parallel beta-strands are oriented in the same direction, and the distance between adjacent residues is approximately 3.5 Å. Therefore, to span a distance of 45 Å, approximately 45 Å divided by 3.5 Å per residue gives an estimate of 12.9 residues. However, beta-strands typically require additional residues for proper folding and stabilization, so more than 45 amino acid residues would be needed for a parallel beta-strand to span 45 Å.

3) Antiparallel beta-strands are oriented in opposite directions, and the distance between adjacent residues is approximately 3.5 Å, similar to parallel beta-strands. Using the same calculation as above, an estimate of 12.9 residues is obtained. However, as with parallel beta-strands, more than 45 amino acid residues would be required for an antiparallel beta-strand to span 45 Å, considering the need for proper folding and stabilization.

Learn more about alpha-helix here: brainly.com/question/31600459

#SPJ11

A certain llquid X has a normal freezing point of 6.50 ∘
C and a freezing point depression constant K f

=2.68 " C⋅kg 'mol −1
. Calculate the freezing point of a solution made of 42.2 g of potassium bromide (KBr) dissolved in 500 . g of X. Round your answer to 3 significant digits.

Answers

The freezing point of a solution made of 42.2 g of potassium bromide (KBr) dissolved in 500 g of X is 4.60 ⁰C.

To find the molality (m):

Molality (m) = Moles of solute ÷ Mass of solvent (in kg)

= 0.355 moles ÷ 0.500 kg

= 0.710 mol/kg

Now, put the values into the freezing point depression equation:

ΔT = Kf × m

ΔT = 2.68 ⁰C⋅kg'mol⁻¹ × 0.710 mol/kg

ΔT = 1.9048 ⁰C

To determine the freezing point of the solution, minus the change in freezing point from the normal freezing point of X:

Freezing point of solution = Normal freezing point of X - ΔT

= 6.50 ⁰C - 1.9048 "C

= 4.5952 ⁰C

Rounding to three significant digits, the freezing point of the solution is 4.60 ⁰C.

Learn more about freezing point, here:

https://brainly.com/question/14765643

#SPJ4

d. A student used a different calibration curve to determine the mass of sugar in a 100.0 mL sample of Gatorade to be 6.95 g. How many grams sugar would be in a 12 oz. bottle of this Gatorade?

Answers

The mass of sugar in a 12 oz. bottle of Gatorade is approximately 2.47 grams, based on the given calibration curve and volume conversion.

To determine the mass of sugar in a 12 oz. bottle of Gatorade, we can use the information provided:

The student determined that the mass of sugar in a 100.0 mL sample of Gatorade is 6.95 g.1 L is equal to 33.8 oz.

First, we need to convert the volume of the 12 oz. bottle to liters:

12 oz * (1 L / 33.8 oz) = 0.355 L

Next, we can use the ratio of the mass of sugar in the 100.0 mL sample to calculate the mass of sugar in the 0.355 L bottle:

(6.95 g / 100.0 mL) * 0.355 L = 2.47 g

Therefore, there would be approximately 2.47 grams of sugar in a 12 oz. bottle of Gatorade.

To know more about the Gatorade refer here,

https://brainly.com/question/4512508#

#SPJ11

Complete question :

A student used a different calibration curve to determine the mass of sugar in a 100.0 mL sample of Gatorade to be 6.95 g. How many grams sugar would be in a 12oz. bottle of this Gatorade? 1 L = 33.8 oz.

what is the frequency of a wave that has a wavelength of 0.78 m and a speed of 343 m/s?

Answers

Answer:

439.76 Hertz

Explanation:

The equation for frequency is:

[tex] \sf f = \dfrac{ \nu}{ \lambda} [/tex]

Where:

f = frequency (Hertz), [tex] \nu[/tex] = speed (343 m/s) and [tex] \lambda[/tex] = wavelength (m)

Plugging the values,

[tex] \sf f = \dfrac{343}{0.78}[/tex]

[tex] \sf f \approx 439.75 \: Hz[/tex]

So The frequency of the given wave is 439.76 Hertz (approximately)

Which of the following compounds has a trigonal pyramidal
geometry?
Which of the following compounds has a trigonal pyramidal
geometry?
PH3
ICl3
SiF4
BrF5
PCl5

Answers

The compound that has a trigonal pyramidal geometry is PH3.

What is the definition of a trigonal pyramidal molecule?

The trigonal pyramidal molecule is a type of molecular geometry that results from tetrahedral geometry when one of the atoms in the molecule is removed. A trigonal pyramid molecule has a pyramid shape with a triangular base.The PH3 compound has a trigonal pyramidal geometry.

The molecule of PH3 has a trigonal pyramidal shape. The central atom is phosphorus, and the other three atoms attached to it are hydrogen. The molecule's shape is due to the valence electron pairs' repulsion. The lone pair occupies more space than a bond pair due to the electron-electron repulsion.

As a result, the bond angle in the PH3 molecule is reduced to 93.5°. Therefore, PH3 has a trigonal pyramidal geometry.The compound PCl5 has a trigonal bipyramidal geometry. The SiF4 compound has a tetrahedral geometry. The BrF5 compound has a square pyramidal geometry. The ICl3 compound has a Tshaped geometry.

To know more about trigonal pyramidal geometry refer here :

https://brainly.com/question/29753855#

#SPJ11

Show how you would accomplish the following synthetic conversions. 1-bromobutane 2-bromobutane (a) but-1-ene (b) but-1-ene (c) 2-methylcyclohexanol 1-bromo-1-methylcyclohexane (d) 2-methylbutan-2-ol -2-bromo-3-methylbutane

Answers

(a) The synthetic conversion of 1-bromobutane to but-1-ene can be achieved by treating 1-bromobutane with a strong base, such as sodium ethoxide (NaOC₂H₅), in an appropriate solvent.

(b) The synthetic conversion of 2-bromobutane to but-1-ene can also be achieved by treating 2-bromobutane with a strong base, such as sodium ethoxide (NaOC₂H₅), in an appropriate solvent.

(c) The synthetic conversion of 2-methylcyclohexanol to 1-bromo-1-methylcyclohexane can be achieved through the reaction with phosphorus tribromide (PBr₃).

(a) To convert 1-bromobutane to but-1-ene, we need to eliminate the bromine atom and introduce a double bond. This is commonly done through an E2 elimination reaction. Here's the step-by-step process:

1. Start with 1-bromobutane (CH₃CH₂CH₂CH₂Br).

2. Treat 1-bromobutane with a strong base, such as sodium ethoxide (NaOC₂H₅), dissolved in an appropriate solvent like ethanol (C₂H₅OH).

3. The strong base removes a proton from the beta-carbon adjacent to the bromine atom, resulting in the formation of a carbanion intermediate.

4. Simultaneously, the bromine atom leaves as a bromide ion.

5. The carbanion intermediate undergoes a concerted E2 elimination, where the base removes a proton from the alpha-carbon, leading to the formation of but-1-ene.

The overall reaction can be represented as:

CH₃CH₂CH₂CH₂Br + NaOC₂H₅ → CH₃CH₂CH=CH₂ + NaBr + C₂H₅OH

(b)The conversion of 2-bromobutane to but-1-ene follows the same mechanism as described above for the conversion of 1-bromobutane to but-1-ene. Here are the steps:

1. Start with 2-bromobutane (CH₃CHBrCH₂CH₃).

2. Treat 2-bromobutane with a strong base, such as sodium ethoxide (NaOC₂H₅), dissolved in an appropriate solvent like ethanol (C₂H₅OH).

3. The strong base removes a proton from the beta-carbon adjacent to the bromine atom, resulting in the formation of a carbanion intermediate.

4. Simultaneously, the bromine atom leaves as a bromide ion.

5. The carbanion intermediate undergoes a concerted E2 elimination, where the base removes a proton from the alpha-carbon, leading to the formation of but-1-ene.

The overall reaction can be represented as:

CH₃CHBrCH₂CH₃ + NaOC₂H₅ → CH₃CH=CH₂ + NaBr + C₂H₅OH

(c)To convert 2-methylcyclohexanol to 1-bromo-1-methylcyclohexane, we need to replace the hydroxyl group (-OH) with a bromine atom (-Br). This can be accomplished using phosphorus tribromide (PBr₃) as a reagent. Here's the procedure:

1. Start with 2-methylcyclohexanol (CH₃CH(OH)CH₂CH₂CH₂CH₃).

2. Add phosphorus tribromide (PBr₃)

learn more about synthetic conversion here:

https://brainly.com/question/32632903

#SPJ11

1 of 15 A pure salt solution can be any of the following except \( \mathrm{pH} \)-free acidic alkaline neutral 2 of 15 You can make a buffer with which of the following? strong acid and strong base we

Answers

A pure salt solution can be any of the following, except pH free, and it is possible to make a buffer with weak acid and its salt, hence options A and D are correct.

The pH of a pure salt solution might vary depending on the type of salt used.

Some salts can generate acidic solutions when dissolved in water, alkaline solutions when dissolved in water, and neutral solutions when dissolved in water.

As a result, a pure salt solution can be neutral, alkaline, or acidic, but it cannot be "pH-free" since the salt will affect the solution's pH.

When tiny quantities of acid or base are introduced, a buffer solution can withstand pH fluctuations.

Learn more about buffer, here:

https://brainly.com/question/31605089

#SPJ4

The given question is incomplete, so the most probable complete question is,

1. A pure salt solution can be any of the following except

A. pH-free

B. acidic

C. alkaline

D. neutral

2. You can make a buffer with which of the following?

A. strong acid and strong base

B. weak acid and conjugate acid

C. strong base and its salt

D. weak acid and its salt

You decide to add to your data table by conducting the same subsitution reactions with another alkyl halide: 3-chloro-1-butene.
Your data shows that 3-chloro-1-butene reacted faster than 2-chlorobutane in an SN1 reaction. Suggest an explanation for this rate difference.

Answers

The rate difference observed between 3-chloro-1-butene and 2-chlorobutane in an SN1 reaction can be attributed to the difference in the stability of the carbocation intermediates formed during the reaction.

In an SN1 reaction, the rate-determining step involves the formation of a carbocation intermediate.

The stability of the carbocation greatly influences the reaction rate. In the case of 3-chloro-1-butene, the chlorine atom is attached to a tertiary carbon, resulting in the formation of a more stable tertiary carbocation intermediate.

On the other hand, 2-chlorobutane gives rise to a secondary carbocation intermediate due to the chlorine atom being attached to a secondary carbon.

Tertiary carbocations are more stable than secondary carbocations due to the presence of additional alkyl groups, which provide electron-donating inductive effects, leading to increased electron density and stability.

This increased stability facilitates the formation of the carbocation intermediate and promotes the reaction rate.

Therefore, the higher reactivity of 3-chloro-1-butene compared to 2-chlorobutane in an SN1 reaction can be explained by the more stable carbocation intermediate formed during the reaction, resulting from the presence of a tertiary carbon in 3-chloro-1-butene.

To know more about "SN1 reaction" refer here:

https://brainly.com/question/30907044#

#SPJ11

Seeking help with practice problem #6
6. Draw both chair conformations for the following cyclohexane and indicate which one is favored. ç

Answers

Due to the minimization of the ring strain, the chair conformation is favored.

What are the conformations of cyclohexane?

Six-membered carbon ring cyclohexane can exist in two chair conformations, depending on the axial and equatorial locations of the substituents.

In the axial position, substituents are orientated outward in a more horizontal orientation, while in the equatorial position, they are oriented vertically above and below the plane of the ring.

The ring strain that is minimized by the preferred chair conformation is the steric strain brought on by interactions between substituents. Because it lessens steric hindrance between adjacent substituents, the equatorial position is typically favored.

Learn more about cyclohexane:https://brainly.com/question/30230108

#SPJ4

Balance the following in a basic solution Pb02(s)→ Pb0(s)

Answers

Balanced half-reactions must be multiplied by factors in order to ensure that the number of electrons is the same in both half-reactions. PbO2(s) → PbO(s)In order to balance the given equation, one must follow the given steps:

Step 1:Write the chemical equation and use the oxidation number method to identify the oxidation state of each element.

Step 2:Identify which elements are undergoing oxidation and reduction.

Step 3:Balance the equation using the half-reaction method.

Step 4:Combine the balanced half-reactions and simplify if necessary.

PbO2(s) → PbO(s)

Step 1:PbO2(s) → PbO(s)

Balance the following equation by identifying the oxidation state of each element:

Pb: +4 O: -2 Pb: +2 O: -2

Step 2:Identify which elements are undergoing oxidation and reduction. In this case, lead (Pb) is undergoing reduction while oxygen (O) is undergoing oxidation.PbO2(s) → PbO(s)

Reduction: Pb4+ → Pb2+Oxidation: O2 → O2-

Step 3:Balance the equation using the half-reaction method. Half-reaction for reduction: Pb4+ + 2e- → Pb2+Half-reaction for oxidation: O2 + 2e- → 2O2-Overall equation: 2Pb4+ + O2 → 2Pb2+ + 2O2-Half-reactions can be balanced by adding electrons (e-) and multiplying by a factor so that the number of electrons is the same in both reactions.

Step 4:Combine the balanced half-reactions and simplify if necessary.

2Pb4+ + O2 + 4e- → 2Pb2+ + 2O2- (multiplied the reduction half-reaction by 2 to balance the electrons)2Pb4+ + 2O2 + 4e- → 2Pb2+ + 4O2- (multiplied the oxidation half-reaction by 2 to balance the electrons)Finally, simplify the equation by canceling out the electrons.2PbO2(s) + 4OH- → 2PbO(s) + 2H2O + O2(g) Hence, the balanced chemical equation is PbO2(s) → PbO(s) and the balanced chemical equation in a basic solution is

2PbO2(s) + 4OH- → 2PbO(s) + 2H2O + O2(g).

To know more about half-reactions visit:-

https://brainly.com/question/32677817

#SPJ11

Consider a solution of NaHA for which F=0.050 mol L−1, Ka,1​=4.70×10−3 and Ka,2​=1.80×10−10, find the pH of the solution. pKa1​=log(Ka1​)=log(4.70×10−3)=−2.32pKa2​=log(Ka2​)=log(1.80×10−10)=−9.74pH=1/2(pKa1​+pKa2​)=1/2(−2.32+(−9.74))=−6.03​

Answers

Answer:1.0⋅10−7

Explanation:Start by writing a balanced chemical equation for the partial ionization of the acidHA(aq]+H2O(l]⇌A−(aq]+H3O+(aq]Notice that you have 1:1 mole ratios across the board. For every mole of acid that ionizes in aqueous solution, you get one mole of its conjugate base and one moleof hydronium ions, H3O+.In other words, the equation produces equal concentrations of conjugate base and hydronium ions. Now, you can use the pH of the solution to calculate the equilibrium concentrationof the hydronium ions. pH=−log([H3O+])⇒[H3O+]=10−pHIn your case, the pH of the solution is equal to 4, which means that you'll have[H3O+]=10−4MBy definition, the acid dissociation constant, Ka, will be equal to Ka=[A−]⋅[H3O+][HA]The expression for the acid dissociation constant is written using equilibrium concentrations. So, if the reaction produced a concentration of hydronium ions equal to 10−4M, it follows that it also produced a concentration of conjugate base equal to 10−4M.Because the initial concentration of the acid is considerably higher than the concentrations of the conjugate base and hydronium ions, you can approximate it to be constant. This means that the acid dissociation constant for this acid will be Ka=10−4⋅10−40.100=1.0⋅10−7This is the underlying concept behind an ICE table HA(aq]+H2O(l] ⇌ A−(aq] + H3O+(aq]I 0.100 0 0C (−x) (+x) (+x)E 0.100−x x xHere x represents the equilibrium concentration for the conjugate acid and hydronium ions. Since you know that x=10−4, you will haveKa=10−4⋅10−40.100−10−4Once again, you can use0.100−10−4=0.0999≈0.100to getKa=10−80.100=1.0⋅10−7

A major component of gasoline is octane (CH). When octane is burned in alc it chemically reacts with oxygen gas (0) to produce carbon dwide ( de (CO) and water (H₂O).
What mass of octane is consumed by the reaction of 3.3 g of oxygen gas?
Be sure your answer has the correct number of significant digits.

Answers

The mass of octane consumed by the reaction of 3.3 g of oxygen gas is approximately 11.5 g.

To determine the mass of octane consumed by the reaction of 3.3 g of oxygen gas, we need to consider the balanced chemical equation for the combustion of octane:

2 C8H18 + 25 O2 -> 16 CO2 + 18 H2O

From the balanced equation, we can see that the stoichiometric ratio between octane (C8H18) and oxygen (O2) is 2:25. This means that for every 2 moles of octane consumed, we require 25 moles of oxygen.

To calculate the mass of octane consumed, we'll follow these steps:

Step 1: Convert the mass of oxygen gas (given) to moles.

Step 2: Use the stoichiometric ratio to find the moles of octane consumed.

Step 3: Convert the moles of octane to mass.

Given: Mass of oxygen gas = 3.3 g

Step 1: Convert the mass of oxygen gas to moles.

Using the molar mass of oxygen (O2) = 32 g/mol:

Moles of oxygen gas = Mass / Molar mass

Moles of oxygen gas = 3.3 g / 32 g/mol

Moles of oxygen gas ≈ 0.103125 mol (rounded to six decimal places)

Step 2: Use the stoichiometric ratio to find the moles of octane consumed.

From the balanced equation, we know that the ratio of octane to oxygen is 2:25.

Moles of octane consumed = Moles of oxygen gas * (2 moles octane / 25 moles oxygen)

Moles of octane consumed ≈ 0.103125 mol * (2/25)

Moles of octane consumed ≈ 0.00825 mol (rounded to five decimal places)

Step 3: Convert the moles of octane consumed to mass.

Using the molar mass of octane (C8H18) = 114.22 g/mol:

Mass of octane consumed = Moles of octane * Molar mass

Mass of octane consumed ≈ 0.00825 mol * 114.22 g/mol

Mass of octane consumed ≈ 0.94365 g (rounded to five decimal places)

Therefore, the mass of octane consumed by the reaction of 3.3 g of oxygen gas is approximately 0.94365 g, or approximately 11.5 g when rounded to three significant digits.


To learn more about oxygen click here: brainly.com/question/11622869

#SPJ11

Use Le Chatelier's principle to determine whether the equilibrium for the endothermic reaction below shifts to the left, right, or does not change under each condition listed: 4Fe(0)​+3O2(0)​→2Fe2​O3( ma )​ a. The pressure is increased b. The temperature is raised c. Some iron is added d. Some oxygen is removed

Answers

Using Le Chatelier's principle, we can analyze the effect of the given conditions on the equilibrium of the endothermic reaction: 4Fe(0) + 3O2(0) → 2Fe2O3(s).

a. When the pressure is increased, Le Chatelier's principle predicts that the equilibrium will shift to the side with fewer moles of gas to counteract the increase in pressure. In this reaction, there is no change in the number of moles of gas, so the equilibrium does not shift to either side.

b. When the temperature is raised, an endothermic reaction like this one will favor the formation of products. Therefore, increasing the temperature will shift the equilibrium to the right.

c. Adding more iron to the system will increase the concentration of reactants. According to Le Chatelier's principle, the equilibrium will shift to the right to consume the excess reactant. In this case, the equilibrium will shift to favor the formation of Fe2O3.

d. Removing oxygen from the system will decrease the concentration of reactants. According to Le Chatelier's principle, the equilibrium will shift to the left to replenish the reactant that was removed. In this case, the equilibrium will shift to favor the formation of Fe(0) and O2.

Therefore, the predicted effects of the conditions on the equilibrium are:

a. No change

b. Shifts to the right

c. Shifts to the right

d. Shifts to the left

To know more about Le Chatelier's principle refer here:

https://brainly.com/question/29009512?#

#SPJ11

The student started with 0.765 mmoles of Reactant A and 1.00
mmoles of Reactant B. The student obtained 0.600 mmoles of product.
Calculate the % yield for this reaction.

Answers

If the student obtained 0.600 mmoles of product, the percent yield for this reaction is 78.43 %.

According to the question:

Beginning with 0.765 mmoles of Reactant A and 1.00 mmoles of Reactant B, the student. The student got 0.600 mmoles of the substance.

To determine the reaction's yield in percentages:

A + B → P

A = 0.765 mmoles

B = 1.00

A is a limiting reagent because its moles are less and consumed fast.

So, theoretical yield of product = 0.765 mmoles

Actual yield of product = 0.600 mmoles

% yield = Actual yield ÷ Theoretical yield

= 0.600 mmoles ÷ 0.765 mmoles

= 78.43 %

Thus, the % yield for this reaction is 78.43 %.

Learn more about percent yield, here:

https://brainly.com/question/30820685

#SPJ4

A precipitate forms when a solution of lead (il) chloride is mixed with a solution of sodium hydroxide. Write the "total ionic". equation describing this chemical reaction.

Answers

The total ionic equation is obtained by dissociating all of the soluble ionic compounds in the equation into their constituent ions. This equation shows all of the ions that are present in the solution during the chemical reaction.Pb2+(aq) + 2Cl-(aq) + 2Na+(aq) + 2OH-(aq) → Pb(OH)2 (s) + 2Na+(aq) + 2Cl-(aq)

The balanced chemical equation of the chemical reaction that occurs when a solution of lead (II) chloride is mixed with a solution of sodium hydroxide is:PbCl2 + 2NaOH → Pb(OH)2 (s) + 2NaCl (aq)

The reaction is a double replacement reaction in which the lead ions (Pb2+) and the sodium ions (Na+) exchange places. Lead (II) hydroxide (Pb(OH)2) precipitates out of the solution as a solid because it is insoluble in water.

To know more about ionic equation refer here :

https://brainly.com/question/29299745#

#SPJ11

What is the pH of 0.025MBa(OH)2​ ? a. 0.050 b. 1.30 c. 12.70 d. 2×10−13 e. 7.00 

Answers

The pH of a 0.025 M Ba(OH)₂ solution is approximately 12.70. The correct option is c.

To determine the pH of the Ba(OH)₂ solution, we need to consider the dissociation of Ba(OH)₂ in water. Ba(OH)₂ dissociates into Ba²⁺ ions and hydroxide (OH⁻) ions in solution.

Ba(OH)₂ → Ba²⁺ + 2OH⁻

Since Ba(OH)₂ is a strong base, it completely dissociates in water. Therefore, the concentration of OH⁻ ions in the solution is twice the initial concentration of Ba(OH)₂.

Given that the initial concentration of Ba(OH)₂ is 0.025 M, the concentration of OH⁻ ions is 2 * 0.025 M = 0.050 M.

To calculate the pH, we need to find the pOH, which is the negative logarithm (base 10) of the concentration of OH⁻ ions:

pOH = -log[OH⁻]

pOH = -log(0.050) ≈ 1.30

Finally, to obtain the pH, we subtract the pOH from 14 (pH + pOH = 14):

pH = 14 - pOH = 14 - 1.30 ≈ 12.70

Therefore, the pH of the 0.025 M Ba(OH)₂ solution is approximately 12.70 . The correct option is c.

To know more about dissociation refer here:

https://brainly.com/question/32501023#

#SPJ11

Explain why 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution.

Answers

In this case, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution because they contain the same number of moles. The equivalence between the 20.00 mL of 0.025 M Na2S2O3 solution and 20.00 mL of a 4.167 mM KIO3 solution can be explained by understanding the concept of molarity and stoichiometry.

Molarity (M) represents the number of moles of a solute dissolved in one liter of solution. In the given problem, the molarity of the Na2S2O3 solution is 0.025 M, which means that there are 0.025 moles of Na2S2O3 in every liter of solution.
To determine the equivalence between the two solutions, we need to compare the number of moles of Na2S2O3 and KIO3 in their respective volumes. Since the volumes are the same (20.00 mL), we can use the molarity to calculate the moles of each substance.
For the Na2S2O3 solution:
Moles of Na2S2O3 = Molarity × Volume = 0.025 M × 20.00 mL = 0.5 millimoles (mmol)
For the KIO3 solution:
Molarity = 4.167 mM, which means there are 4.167 millimoles of KIO3 in every liter of solution.
Moles of KIO3 = Molarity × Volume = 4.167 mM × 20.00 mL = 0.08334 millimoles (mmol)
Comparing the moles, we can see that 0.5 mmol of Na2S2O3 is equal to 0.08334 mmol of KIO3. Therefore, the two solutions are equivalent.
In summary, the equivalence is determined by comparing the moles of the solutes present in the same volume of the two solutions. In this case, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution because they contain the same number of moles.

To know more about moles visit :

https://brainly.com/question/15209553

#SPJ11

What is the hydronium ion concentration of a 3.3 M Aniline
(C6H5NH2) solution?
What is the hydronium concentration of a 0.3 M solution
of NaCN?

Answers

The hydronium ion concentration of both solutions is approximately 1.0 × 10⁻¹⁴ M.

Aniline is an organic base and NaCN is a weak acid, so both of these solutions will have a very low hydronium ion concentration. To calculate the hydronium ion concentration, you will need to know the acid dissociation constant (Ka) for aniline and the basic dissociation constant (Kb) for NaCN.Ka for aniline = 4.2 × 10⁻¹⁰Kb for NaCN

= 4.9 × 10⁻⁵ To calculate the hydronium ion concentration of a 3.3 M aniline solution, you will need to first calculate the concentration of aniline ions (C₆H₅NH₃⁺). Since aniline is a weak base, it will react with water to form aniline ions and hydroxide ions: C₆H₅NH₂ + H₂O ⇌ C₆H₅NH₃⁺ + OH⁻ The equilibrium constant for this reaction is Kb for aniline, which is equal to 4.2 × 10⁻¹⁰. Therefore: Kb = [C₆H₅NH₃⁺][OH⁻]/[C₆H₅NH₂]4.2 × 10⁻¹⁰

= [C₆H₅NH₃⁺][OH⁻]/(3.3 M) Assuming that the hydroxide ion concentration is negligible, you can solve for [C₆H₅NH₃⁺]:[C₆H₅NH₃⁺] = 1.4 × 10⁻¹¹ M To calculate the hydronium ion concentration of a 0.3 M solution of NaCN, you will need to first calculate the concentration of cyanide ions (CN⁻).

Since NaCN is a salt of a weak acid and a strong base, it will react with water to form cyanide ions and hydroxide ions: NaCN + H₂O ⇌ Na⁺ + CN⁻ + OH⁻ The equilibrium constant for this reaction is Kw/Kb for NaCN, which is equal to (1.0 × 10⁻¹⁴)/(4.9 × 10⁻⁵) = 2.0 × 10⁻¹⁰. Therefore:

Kw/Kb = [CN⁻][OH⁻]/[NaCN]2.0 × 10⁻¹⁰

= [CN⁻][OH⁻]/(0.3 M) Assuming that the hydroxide ion concentration is negligible, you can solve for

[CN⁻]:[CN⁻] = 1.3 × 10⁻⁶ M The hydronium ion concentration is equal to Kw/[OH⁻]. Since the hydroxide ion concentration is negligible, the hydronium ion concentration is approximately equal to Kw. At 25°C, Kw = 1.0 × 10⁻¹⁴. Therefore, the hydronium ion concentration of both solutions is approximately 1.0 × 10⁻¹⁴ M.

To know more about hydronium ion visit:-

https://brainly.com/question/14619642

#SPJ11

Question A2 Square planar metal complexes typically undergo ligand substitution via an associative mechanism, due to their low coordination number. Below is a series of ligands listed in terms of the

Answers

Square planar metal complexes typically undergo ligand substitution via an associative mechanism due to their low coordination number.

Square planar metal complexes typically undergo ligand substitution via an associative mechanism, primarily due to their low coordination number. In an associative mechanism, a new ligand enters the coordination sphere before the departure of the existing ligand. This process occurs through a series of steps involving intermediate complexes.

When considering ligand substitution in square planar complexes, certain factors influence the ease and rate of the process. One crucial factor is the nature of the incoming and outgoing ligands. Ligands can be classified based on their ability to coordinate to a metal center, ranging from strongly binding to weakly binding.

Strongly binding ligands, such as carbon monoxide (CO) and cyanide (CN-), have a high affinity for the metal center and tend to stabilize the intermediate complexes. These ligands can readily undergo associative ligand substitution reactions due to their strong interaction with the metal.

Moderately binding ligands, such as ammonia (NH3) and pyridine (C5H5N), have intermediate binding strengths. They can participate in ligand substitution reactions, but the rates might be slower compared to strongly binding ligands.

Weakly binding ligands, such as water (H2O) and chloride (Cl-), have a lower affinity for the metal center. These ligands are less likely to undergo associative ligand substitution and typically favor a dissociative mechanism, where the departing ligand leaves the coordination sphere before the entering ligand coordinates.

The ease and rate of ligand substitution in square planar metal complexes depend on the strength of the ligand-metal interaction. Strongly binding ligands facilitate associative substitution reactions, while weakly binding ligands prefer a dissociative mechanism. Moderately binding ligands exhibit intermediate behavior in terms of ligand substitution.

To know more about Square planar refer here

https://brainly.com/question/31672412#

#SPJ11

Draw the lewis structure of the polymer NEOPRENE also known as
POLYCHLOROPRENE.

Answers

Neoprene, or polychloroprene, has a polymer structure with repeating units of chloroprene monomers connected by covalent bonds. It is a versatile synthetic rubber known for its heat, weather, and chemical resistance, used in applications like wetsuits and adhesives.

Neoprene, also known as polychloroprene, is a synthetic rubber polymer with the chemical formula (C4H5Cl)n. Its Lewis structure can be represented as follows:

Cl Cl

| |

C= C - C - C - C - C = C

|

Cl

In the structure, the repeating unit is composed of a chloroprene monomer, where two carbon atoms are connected by a double bond (C=C) and one of the carbon atoms is bonded to a chlorine atom (Cl). The polymer chain is formed by the repetitive attachment of these monomers through covalent bonds.

Neoprene exhibits excellent resistance to heat, weathering, and chemicals, making it a widely used material in various applications such as wetsuits, gaskets, and adhesives.

To know more about the Neoprene refer here,

https://brainly.com/question/7435074#

#SPJ11

Compare the de Broglie wavelength of a proton moving at 1.30x107 miles per hour (5.81x106 m/s) to that of a bullet moving at 700 miles per hour (313 m/s) and an electron with a speed of 1.30x107 miles per hour (5.81x106 m/s).

Answers

The de Broglie wavelength of the proton is 6.82×10-14m, that of the bullet is 2.11×10-34m, and that of the electron is 1.25×10-9m.

De Broglie Wavelength De Broglie wavelength is the distance between the adjacent peaks in a wave and is denoted by λ (lambda). The wave property of matter is explained by the de Broglie wavelength. For all moving objects, de Broglie wavelength is given by λ = h/p, where λ is the wavelength of the object in metres, h is Planck’s constant with a value of 6.626×10-34 joules-second, and p is the momentum of the object in kg m/s.

Since h is a constant, the wavelength is inversely proportional to the momentum of the object. We can compare the de Broglie wavelength of the proton and bullet moving with a speed of 1.30×107 miles per hour (5.81×106 m/s) and 700 miles per hour (313 m/s), respectively, and an electron with a speed of 1.30×107 miles per hour (5.81×106 m/s).

Solution The momentum of the proton is given by

p = mv

where m is the mass of the proton and v is its velocity.

The mass of the proton is 1.67×10-27 kg and its velocity is 5.81×106 m/s.

Then, the momentum of the proton is

p = mv

= 1.67 ×10^-27 kg × 5.81 ×10^6 m/s

= 9.72 × 10^-21 kg.m/s

The de Broglie wavelength of the proton is given by

λ = h/p

where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p = 6.626 × 10^-34 J.s / 9.72 × 10^-21 kg.m/s

= 6.82 × 10^-14 m

Similarly, the momentum of the bullet is given by

p = mv

where m is the mass of the bullet and v is its velocity.The mass of the bullet is 0.010 kg and its velocity is 313 m/s.

Then, the momentum of the bullet is

p = mv

= 0.010 kg × 313 m/s

= 3.13 kg.m/s

The de Broglie wavelength of the bullet is given by

λ = h/p where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p

= 6.626 × 10^-34 J.s / 3.13 kg.m/s

= 2.11 × 10^-34 m

Finally, the momentum of the electron is given by p = mv where m is the mass of the electron and v is its velocity.

The mass of the electron is 9.11×10^-31 kg and its velocity is 5.81×106 m/s.

Then, the momentum of the electron is

p = mv = 9.11 × 10^-31 kg × 5.81 × 10^6 m/s

= 5.29 × 10^-24 kg.m/s.

The de Broglie wavelength of the electron is given by

λ = h/p

where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p

= 6.626 × 10^-34 J.s / 5.29 × 10^-24 kg.m/s

= 1.25 × 10^-9 m

To know more about wavelength   visit:-

https://brainly.com/question/31143857

#SPJ11

What volume of the diluted solution contains 13.8 g of NaCl ? (Hint. Figure out the concentration of the diluted solution first.) Express your answer using two significant figures. Which of those are solutions? Check all that apply. nitrogen gas hexane table salt air distilled water seawater

Answers

Volume of the diluted solution containing 13.8 g of NaCl: Insufficient information provided.

Solutions: Table salt, distilled water, seawater.

1. Volume of the diluted solution containing 13.8 g of NaCl: To determine the volume, we need to know the concentration of the diluted solution. Without this information, we cannot calculate the volume. Therefore, the volume cannot be determined with the given information.

2. Solutions: The solutions among the given options are table salt, distilled water, and seawater.

- Nitrogen gas (N2) is not a solution but a pure gas.

- Hexane is a hydrocarbon and does not form a solution with the other substances mentioned.

- Table salt (NaCl) dissolves in water to form a solution.

- Air is a mixture of gases, not a solution.

- Distilled water is a pure substance, but it can be considered a solvent for other substances to form solutions.

- Seawater is a solution that contains various dissolved substances, including salts and minerals.

Therefore, the solutions among the given options are table salt (NaCl), distilled water, and seawater.

To know more about "Diluted solution" refer here:

https://brainly.com/question/1416865#

#SPJ11

Other Questions
reasons why Europeans came to East Africa What is the Hypothesis Test of Proportion where the claim for a marketing campaign is that 0.65 clients respond, and you want to prove it is less. Your survey of 116 clients showed 80 respond. Test the hypothesis at a 5 % level of significance.What is the decision rule for the above? d. A student used a different calibration curve to determine the mass of sugar in a 100.0 mL sample of Gatorade to be 6.95 g. How many grams sugar would be in a 12 oz. bottle of this Gatorade? What is the range of the function in the graph Seeking help with practice problem #66. Draw both chair conformations for the following cyclohexane and indicate which one is favored. what does mVSR = equals? 2.19 Billy Bob wants to gain some weight so that he can play football. Billy eats only milkshakes and spinach. Milkshakes cost him $1 each and spinach costs $2 per serving. A milkshake has 850 calories and a serving of spinach has 200 calories. Billy Bob never spends more than $20 a day on food and he always consumes at least 8000 calories per day. Which of the following is necessarily true?(a) Billy Bob consumes at least 9 milkshakes a day.(b) Billy Bob never consumes more than 6 servings of spinach a day .(c) Billy Bob never consumes positive amounts of both goods.(d) Billy Bob consumes only milkshakes.(e) None of the above. True or False if one has access to a census for a population that covers the object of interest, its always best to use a sample of the population rather than the census to study the object of interest. A cylindrical vessel 1.20 m in diameter and 2 m high has a rounded circular orifice 5 cm in diameter in the bottom with C = 0.95. If the vessel is full of water, how long will it take to lower the surface 1.50 m? . Based on the Cenozoic Life exhibit, describe hominins, their rise to dominance, and the beginnings of civilization. Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of Kb = n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa. A laboratory assistant adds sucrose (C12H22O11), a non-volatile sugar, to 400 g of ethanol at the given temperature. The vapour pressure of the solution is measured to be 5252 Pa. Determine the boiling point of the solution. Suppose that f(x) is continuous at x=0 and limx0+f(x)=1. Which of the following must be true? Circle all that apply. a) limx0f(x)=1 b) limx0f(x)=DNE c) f(0)=1. d) f(x) is differentiable at x=0 Given the function C(r) = (r6) (r + 7) (r - 2) its C-intercept is its r-intercepts are Question Help: Video Message instructor Calculator Submit Question After which event could it be said that evolution has occurred?An individual is born with six fingers on one hand instead of five.An animals white winter coat is replaced by a darker coat in the spring.A new predator comes into an environment.An allele frequency in a population changes over time. Show that the third Maclaurin polynomial for \( f(x)=(x-3)^{3} \) is \( f(x) \). Compare the de Broglie wavelength of a proton moving at 1.30x107 miles per hour (5.81x106 m/s) to that of a bullet moving at 700 miles per hour (313 m/s) and an electron with a speed of 1.30x107 miles per hour (5.81x106 m/s). What is the area of a right triangle with a height of six and one fourth yards and a base of 22 yards? 34 yds2 sixty eight and three fourths yds2 132 yds2 one hundred thirty seven and one half yds2 Monthly loan payments Personal Finance Problem Tim Smith is shopping for a used luxury car. He has found one priced at $31,000. The dealer has told Tim that if he can come up with a down payment of $6,300, the dealer will finance the balance of the price at a 7% annual rate over 2 years (24 months). (Hint: Use four decimal places for the monthly interest rate in all your calculations.) a. Assuming that Tim accepts the dealer's offer, what will his monthly (end-of-month) payment amount be? b. Use a financial calculator or spreadsheet to help you figure out what Tim's monthly payment would be if the dealer were willing to finance the balance of the car price at an annual rate of 3.8% ? Time to accumulate a given sum Personal Finance Problem Manuel Rios wishes to determine how long it will take an initial deposit of $8,000 to double. a. If Manuel earns 9% annual interest on the deposit, how long will it take for him to double his money? b. How long will it take if he earns only 6% annual interest? c. How long will it take if he can earn 11% annual interest? During war time in history did clinical work become prominent? A.During Wendis practice B.World War II C.World War I D.During the inception of behavioral psychology (b) Generalize the fact that for a given sample of biomass, which one is larger: its dry-basis or its wet-basis moisture content? (a) Show that the power transmitted forward in a deep-water wave relate to the amplitude and wavelength of the wave. (b) Show that the power per unit wave front of deep-water waves relate to their significant wave. height.