What is the effect on a field of tall grass when a wave caused by a cool summer breeze passes through the field?
Select one:
a. The grass leans in the direction the wind is blowing, then returns to its original position.
b. The field of grass exhibits a permanent disturbance in the direction the wind is blowing.
c. To counteract the effect of the breeze, the grass leans into the wind.
d. Some grass leans in the direction the wind is blowing and some leans into the wind.

Answer:

0.4

Explanation:

ω = km

ω = 1000 x 4

ω = 4000 divide this by 10000 and you get 0.4s

C. The Densities are equal.

Density is mass per unit volume or mass of a unit volume of a material substance.

If m1, V1 and D1 = mass, volume  and density respectively of ball C

m2, V2 and D2 = mass, volume and density respectively of ball D

According to the Question ,

[tex]V_{1} = 3V_{2} , m_{2} = \frac{1}{3} (m_{1} ) \\ \\= m_{1} = 3m_{2}[/tex]

Therefore,

[tex]\frac{D_{1} }{D_{2} } = (\frac{m_{1} }{V_{1} } )* (\frac{m_{2} }{V_{2} } )\\ \\= (\frac{3m_{2} }{3V_{2} })*(\frac{V_{2} }{m_{2} }) \\\\= 1[/tex]

Hence, D1 = D2

Learn more about density here:https://brainly.com/question/15164682

#SPJ1

Answer:

Answer is C because light travels in a sight line but when light pass through a refractor the light from the source changes direction when passes through a refractor

Here is your answer mate,

Question,

[tex]Determine\: the\: amount\\ \: of\: power\:used\: in\\\: holding\: a\: 25\: kg\: box\:\\ , \: 1.5\: meters \: above\: the\: floor\\\: for\: 60\: seconds[/tex]

Answer,

[tex][/tex]

Solution,

[tex][/tex]

Given,

[tex]MASS \: IS\: 25\: KG\: \\ and \: HEIGHTIS\: 1.5m\: [/tex]

[tex][/tex]

WORK DONE (done against gravity) =

mass×acceleration due to gravity ×height

WORK = 25× 10× 1.5

[tex]\: \: \: \: \: \: \: \:\: \: \: \: \: \: \: [/tex]= 375 Nm

[tex][/tex]

Now

POWER =

[tex] \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \:\frac{work}{time} [/tex]

POWER

[tex]\: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \:= \frac{375}{60} Watt [/tex]

[tex]\: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: =6.25[/tex]

[tex]Therfore\: your \: answer\: is\: 6.25[/tex]

[tex][/tex]

Check this,

[tex]Acceleration\: due\: to \: gravity\\\: can\: be\: 9.8\: m/s²\: \\As\: nothing\: mentioned\\\: in\: question\: \\I \: took \: it \: as \: 10[/tex]

[tex][/tex]

Have a good day

Answer:

He has a hangover.

Explanation:

Just something I know.

Answer:

λ = c / f     or    f = c / λ

f = 3.0E8 / 4.0E-7 = .75E15 / sec = 7.5E14 / sec = 7.5 X 10^14 /sec

Answer:

The scientific method

Explanation:

The gauge pressure at bottom of vaccine solution will be 16 kPa

Positive pressure is another name for gauge pressure. When a system's internal pressure exceeds that of its surroundings, it is said to be under positive pressure. Any leak that develops in the positively pressured system will therefore escape into the outside world. In contrast, a negative pressure chamber draws air into it.

Given As seen in the illustration, a syringe is held vertically. The container carries a 3 cm tall column of vaccine solution and has an open inner diameter of 1 cm. The needle contains a 2 cm column of vaccine solution and has an open inner diameter of 0.5 mm. At the needle's open end, the solution is exposed to the air. The vaccination solution has a density of 1200 kg/m3.

We have to find the gauge pressure at bottom of vaccine solution

Since the 5N force is applied to vaccine solution the pressure exerted will be much more

Hence the gauge pressure at bottom of vaccine solution will be 16 kPa

Learn more about gauge pressure here:

brainly.com/question/25736513

#SPJ10

The distance of the Image will be -33.75 cm

A concave mirror has an inward-curving reflecting surface that faces away from the light source. Unlike convex mirrors, a concave mirror's image forms a variety of images based on the object's proximity to the mirror.

Given that, an object placed 27 cm from a concave mirror having the focal length of 15 cm

We have to find distance of the Image

Using Mirror Formula:

1/f = 1/v + 1/u

Where,

f = focal length

v =  Image distance from the mirror

u = object distance from the mirror (concave)

Substitute the known values in the above formula to find the value of 'v' i.e. from the mirror.

1/(-15) = 1/v + 1/(-27)

1/(-15) = 1/v - (1/27)

1/v = -0.029

v = -33.75 cm

Therefore the distance of the Image will be -33.75 cm

Learn more about concave mirror here:

brainly.com/question/9816370

#SPJ10

Answer:

Discrimination is the worst thing in the world you can't even do a thing so you will do such a physical thing or do a mathematics problem ok done it's ok

The total kinetic energy of the woman when she reaches the ground is 6,198.5 J.

The total kinetic energy of the woman when she reaches the ground is calculated from the principle of conservation of energy.

P.E(top) = K.E(bottom)

P.E(top) = mgh

P.E(top) = 55 x 9.8 x 11.5

P.E(top) = 6,198.5 J

Thus, the total kinetic energy of the woman when she reaches the ground is 6,198.5 J.

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

The proper connection between kinetic energy and speed is depicted in Graph D.

The kinetic energy (KE) is defined as one-half of the mass times multiplied by the square of velocity.

[tex]\rm KE = \frac{1}{2}mv^2[/tex]

where,

KE is the kinetic energy

m is the mass of each molecule

(V) is the  velocity

As the square of the velocity is exactly proportional to kinetic energy. Consequently, the relationship between velocity and kinetic energy must be parabolic.

The proper connection between kinetic energy and speed is depicted in Graph D. Graph showing the link between kinetic energy on the y-axis and speed on the x-axis.

On the y-axis, a semi-curve line begins above the origin and ascends as it accelerates.

To learn more about the kinetic energy refer to the link;

https://brainly.com/question/12669551

#SPJ1

Option C. The measurement with the most significant number is 6.600 cm.

Significant numbers are numbers that have significance or meaning and give more precise details about the value of the entire numbers.

Thus, the measurement with the most significant number is 6.600 cm.

Learn more about significant numbers here: https://brainly.com/question/24491627

#SPJ1

The velocity of the board relative to the ice is zero, since both are at rest.

Relative velocity is the velocity of an object in relation to another reference object or point.

When two objects are travelling or moving with the same velocity in the same direction, the relative velocity one relative to the other is zero.

Also, when two objects are at rest, the relative velocity one relative to the other is zero.

Therefore, the velocity of the board relative to the ice is zero, since both are at rest.

Learn more about relative velocity at: https://brainly.com/question/24337516

#SPJ1

The magnitude of the reaction force of the air pushing the balloon would be equal and opposite.

A push or a pull that an object experiences as a result of interacting with another item is known as a  reaction force.

Newton's third law is officially expressed as follows: There is an equal and opposite reaction to every action. The implication of the statement is that there are always two forces acting on the two interacting objects. The force acting on the first object is equal in size to the force acting on the second. The force acting on the first object is acting in the opposite direction to the force acting on the second object. Force pairs—equal and opposing action-reaction force pairs—always exist in pairs.

Knowing that everything has an equal and opposite reaction according to Newton's second law. The preasured air that a balloon had to push out into the free air acts as the reaction force.

To learn more about reaction force refer to:

https://brainly.com/question/14360695

#SPJ10

The total time required is 1 minute and 0.3 seconds.

Assumption: The distance between the people is 1 m and the stadium is a circle with a radius of 100m.

Here, the time taken by the person is 0.1 seconds.

Total distance covered by the wave = Circumference of the circle

So, total distance = 2 πr = 2 × 3.14 × 100 = 618 m

As the distance between each of the people is 1 m.

So, the number of personal interactions is 618.

Time taken by each person is 0.1 seconds.

So, total time, t = 0.1 × 618 = 61.8 seconds.

So, the order of the magnitude of the time required is 1 minute and 0.3 seconds for such a pulse to make one circuit around BC Place Stadium in Vancouver.

Hence, the total time required is 1 minute and 0.3 seconds.

Learn more about waves here:

https://brainly.com/question/15663649

#SPJ10

The sled accelerates with magnitude [tex]a[/tex] such that

[tex]\left(2.3\dfrac{\rm m}{\rm s}\right)^2 = 2a(9.2\,\mathrm m) \implies a = 0.2875\dfrac{\rm m}{\mathrm s^2}[/tex]

By Newton's second law, the net force in the plane of motion (parallel to the ground) is

[tex]31\,\mathrm N - F_{\rm friction} = (17 \,\mathrm{kg}) \left(0.2875 \dfrac{\rm m}{\mathrm s^2}\right)[/tex]

so that the force of friction exerts a magnitude of

[tex]F_{\rm friction} = 26.1125 \,\mathrm N[/tex]

Perpendicular to the ground, the sled is in equilibrium, so Newton's second law says

[tex]F_{\rm normal} - (17\,\mathrm{kg})g = 0 \implies F_{\rm normal} = 166.6 \,\mathrm N[/tex]

The magnitude of friction is proportional to the magnitude of the normal force by a factor of [tex]\mu_k[/tex], the coefficient of kinetic friction. It follows that

[tex]F_{\rm friction} = \mu_k F_{\rm normal} \implies \mu_k = \dfrac{26.1125\,\rm N}{166.6\,\rm N} \approx \boxed{0.16}[/tex]

(and the coefficient is dimensionless).

a. 1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.

b.21,835 J work, in joules, is done by the rope on the sled this distance.

c. 23,170 J   the work, in joules done by the gravitational force on the sled d. The net work done on the sled, in joules is 43,670 J.

The work done by friction is the force of friction times the distance traveled times the cosine of the angle between the friction force and displacement

a. How much work is done by friction as the sled moves 28m along the hill?

ans. We use the formula:

friction work = -µ.mg.dcosθ

  = -0.100 * 97.5 kg * 9.8 m/s² * 28 m * cos 60

= -1337.3 J

-1337.3 J work, in joules, is done by friction as the sled moved 28 m along the hill.

b. How much work is done by the rope on the sled in this distance?

We use the formula:

Rope work = -m.g.d(sinθ - µcosθ)

rope work = - 97.5 kg * 9.8 m/s² * 28 m (sin 60 – 0.100 * cos 60)

                     = 26,754 (0.816)

                     = 21,835 J

21,835 J work, in joules, is done by the rope on the sled this distance.

c.  What is the work done by the gravitational force on the sled?

By using  the formula:

Gravity work = mgdsinθ

                    = 97.5 kg * 9.8 m/s² * 28 m * sin 60

                    = 23,170 J

23,170 J   the work, in joules done by the gravitational force on the sled .

D. What is the total work done?

By adding all the values

work done =  -1337.3 + 21,835 + 23,170

                 = 43,670 J

The net work done on the sled, in joules is 43,670 J.

Learn more about friction work here:

https://brainly.com/question/14619763

#SPJ1

10¹¹ is the approximate number of atoms in a bacterium.

The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit (amu).

Given,

Mass of a bacterium atom = 10⁻¹⁵ kg.

Mass of a hydrogen atom  = 10⁻²⁷ kg.

From the above observation ,

The average mass of an atom of the bacterium is ten times the mass of a hydrogen atom.

Atomic mass 1 bacterium atom = 10 x mass of hydrogen atom

                                                  = 10 x 10⁻²⁷ kg.

                                                  = 10⁻²⁶ kg.

Thus,

The number of atoms in a bacterium

=  [tex]\frac{Total mass}{Atomicmass of 1 bacterium}[/tex]

= [tex]\frac{10^{-15} }{10^{-26} }[/tex]

=  [tex]10^{11}[/tex]

The approximate number of atoms in a bacterium  is [tex]10^{11}[/tex].

Learn more about bacterium here:

https://brainly.com/question/12958132

#SPJ1

The estimated density of the golf ball is  700 kg/m³

Density is defined as Mass per unit Volume.

In displacement method,  

First , we measuring the volume of water displaced by an object which tell us the volume of the object then we will use the physical balance to determine its mass.

Then calculate the density by dividing the mass by the volume.

i.e.  D = m/V

Given,  Density of water is 1.0 g/cm³

Using displacement method  , The estimated volume of golf ball is 100 cm³  and estimated mass is 7g

Then ,

Density =  10 cm³ / 7 g= 0.07 g/ cm³ = 700 kg/m³

So the estimated density of golf ball is 700 kg/m³

For more density related question visit :

https://brainly.com/question/15164682

#SPJ1

The voltage of the secondary will be 36 V.From the given conditions primary transformer has 3 times as many turns in the secondary coil.

Electromagnetic induction is what causes the induced voltage. Electromagnetic induction is the process of generating emf (induced voltage) by subjecting a conductor to a magnetic field.

Given data;

No turns in the primary coil,[tex]\rm N_p = 480 turns[/tex]

No turns in the secondary coil,[tex]\rm N_s = 112 turns[/tex]

The voltage of the primary coil,[tex]\rm V_p = 28 v[/tex]

The voltage of the secondary coil,[tex]\rm V_s = ?[/tex]

For a transformer,

[tex]\rm \frac{V_p}{V_s}= \frac{N_p}{N_s} \\\\ \rm \frac{28}{V_s}= \frac{480}{112} \\\\ V_s = 6.53 \ v[/tex]

Hence the voltage of the secondary will be 36 V.

To learn more about the induced voltage refer to the link;

https://brainly.com/question/19482771

#SPJ1

Answer: 6.53

Explanation: I had the same question and here's what I got:

Values:

Vp (Primary Voltage) = 28.0

Ns (Secondary Number of Turns) = 112

Np (Primary Number of Turns) = 480

Vs = Vp Ns/Np

= (28)(112)/(480)

Vs = 6.53 (FINAL ANSWER)

Answer:

54.0 x0.1=5.4 x0.03=0.162

kinetic force

If a contestant in a winter games event pushes a 54.0 kg block of ice across a frozen lake. The coefficient of static friction is 0.1 and the coefficient of kinetic friction is 0.03, then the minimum force F he must exert to get the block moving would be 5.2974 Nwrons.

Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact.

As given in the problem, If a contestant in a winter games event pushes a 54.0 kg block of ice across a frozen lake. The coefficient of static friction is 0.1 and the coefficient of kinetic friction is 0.03,

The force required to get the block moving = μMg

                                                                          = 0.01×54×9.81

                                                                         = 5.2974 Newtons

Thus, the minimum force required to move the block would be 5.2974 Newtons.

To learn more about friction from here, refer to the link;

brainly.com/question/24186853

#SPJ2

Based on my personal experiences, I believe that there is a difference between areas in precision of control because there are different part of the brain that controls the functions of the body.

From the standpoint of  brain lateralization, differences do exist such as based on experience such as handedness or specific skills such as playing a guitar.

Note that Left-handers are said to have reduced or little lateralized brains, which tells us that the two halves of the brain are little different than as seen in the right-handers.

Therefore, I can say that based on my personal experiences, I believe that there is a difference between areas in precision of control because there are different part of the brain that controls the functions of the body.

Learn more about brain from

https://brainly.com/question/1247675

#SPJ1

The distance x equal to 0.87 cm when the intensity of the light decreases by 9 times.

The intensity of light is given as power emitted by the light by unit area.

I = P/A

I = P/L²

I₁L₁² = I₂L₂²

L₂² = I₁L₁²/I₂

L₂² = (3 x 1.5²)/(9)

L₂² = 0.75

L₂ = 0.87 cm

Thus, the distance x equal to 0.87 cm when the intensity of the light decreases by 9 times.

Learn more about intensity here: https://brainly.com/question/14924672

#SPJ1

Disclaimer: I ended up finding what's asked for in the reverse order (e)-(a).

At time [tex]t[/tex], the horizontal position [tex]x[/tex] and vertical position [tex]y[/tex] of the ball are given respectively by

[tex]x = v_i \cos(\theta_i) t[/tex]

[tex]y = v_i \sin(\theta_i) t - \dfrac g2 t^2[/tex]

and the horizontal velocity [tex]v_x[/tex] and vertical velocity [tex]v_y[/tex] are

[tex]v_x = v_i \cos(\theta_i)[/tex]

[tex]v_y = v_i \sin(\theta_i) - gt[/tex]

The ball reaches its maximum height with [tex]v_y=0[/tex]. At this point, the ball has zero vertical velocity. This happens when

[tex]v_i \sin(\theta_i) - gt = 0 \implies t = \dfrac{v_i \sin(\theta_i)}g[/tex]

which means

[tex]y = \dfrac R6 = v_i \sin(\theta_i) \times \dfrac{v_i \sin(\theta_i)}g - \dfrac g2 \left(\dfrac{v_i \sin(\theta_i)}g\right)^2 \\\\ \implies R = \dfrac{6{v_i}^2 \sin^2(\theta_i)}g - \dfrac{3{v_i}^2 \sin^2(\theta_i)}g \\\\ \implies R = \dfrac{3{v_i}^2 \sin^2(\theta_i)}g[/tex]

At the same time, the ball will have traveled half its horizontal range, so

[tex]x = \dfrac R2 = v_i \cos(\theta_i) \times \dfrac{v_i \sin(\theta_i)}g \\\\ \implies R = \dfrac{2{v_i}^2 \cos(\theta_i) \sin(\theta_i)}g[/tex]

Solve for [tex]v_i[/tex] and [tex]\theta_i[/tex] :

[tex]\dfrac{3{v_i}^2 \sin^2(\theta_i)}g = \dfrac{2{v_i}^2 \cos(\theta_i) \sin(\theta_i)}g \\\\ \implies 3 \sin^2(\theta_i) = 2 \cos(\theta_i) \sin(\theta_i) \\\\ \sin(\theta_i) (3\sin(\theta_i) - 2 \cos(\theta_i)) = 0[/tex]

Since [tex]0^\circ<\theta_i<90^\circ[/tex], we cannot have [tex]\sin(\theta_i)=0[/tex], so we're left with (e)

[tex]3 \sin(\theta_i) - 2\cos(\theta_i) = 0 \\\\ \implies 3 \sin(\theta_i) = 2\cos(\theta_i) \\\\ \implies \tan(\theta_i) = \dfrac23 \\\\ \implies \boxed{\theta_i = \tan^{-1}\left(\dfrac23\right) \approx 33.7^\circ}[/tex]

Now,

[tex]\cos\left(\tan^{-1}\left(\dfrac23\right)\right) = \dfrac3{\sqrt{13}}[/tex]

[tex]\sin\left(\tan^{-1}\left(\dfrac23\right)\right) = \dfrac2{\sqrt{13}}[/tex]

so it follows that (d)

[tex]R = \dfrac{2{v_i}^2 \times\frac3{\sqrt{13}} \times \frac2{\sqrt{13}}}g \\\\ \implies {v_i}^2 = \dfrac{13Rg}{12} \\\\ \implies \boxed{v_i = \sqrt{\dfrac{13Rg}{12}}}[/tex]

Knowing the initial speed and angle, the initial vertical component of velocity is (c)

[tex]v_y = \sqrt{\dfrac{13Rg}{12}} \sin\left(\tan^{-1}\left(\dfrac23\right)\right) \\\\ \implies v_y = \sqrt{\dfrac{13Rg}{12}} \times \dfrac2{\sqrt{13}} \\\\ \implies \boxed{v_y = \sqrt{\dfrac{Rg}3}}[/tex]

We mentioned earlier that the vertical velocity is zero at maximum height, so the speed of the ball is entirely determined by the horizontal component. (b)

[tex]v_x = \sqrt{\dfrac{13Rg}{12}} \times \dfrac3{\sqrt{13}} \\\\ \implies v_x = \dfrac{\sqrt{3Rg}}{2}[/tex]

Then with [tex]v_y=0[/tex], the ball's speed [tex]v[/tex] is

[tex]v = \sqrt{{v_x}^2 + {v_y}^2} \\\\ \implies v = v_x \\\\ \implies \boxed{v = \dfrac{\sqrt{3Rg}}2}[/tex]

Finally, in the work leading up to part (e), we showed the time to maximum height is

[tex]t = \dfrac{v_i \sin(\theta_i)}g[/tex]

but this is just half the total time the ball spends in the air. The total airtime is then

[tex]2t = \dfrac{2 \times \sqrt{\frac{13Rg}{12}} \times \frac2{\sqrt{13}}}g \\\\ \implies 2t = 2\sqrt{\dfrac R{3g}}[/tex]

and the ball is in the air over the interval (a)

[tex]\boxed{0 < t < 2\sqrt{\frac R{3g}}}[/tex]

The merits of and problems with the manager’s statement are explained below.

Extension of the social identity of the individual in groups such as working in company or studying in college is called as the stereotyping in organizations.

Merits of Stereotypes in organizations:

Demerits of Stereotypes:

Thus, the merits and demerits of stereotypes in organizations are explained above.

Learn more about stereotypes.

https://brainly.com/question/13281670

#SPJ1

According to Piaget, that means that she has made the transition from the sensorimotor to preoperational stage

The first of Piaget's four stages of cognitive development is the sensorimotor stage.

A child's understanding that the outside world exists apart from them is what distinguishes it.

Within Piaget's stages of development, the kid will advance to the following stage after they have completely grasped this.

"Charlene has just begun to be able to form a mental representation of an object that is not visibly present.

According to Piaget, that means that she has made the transition from the sensorimotor to preoperational stage

Only recently has Charlene been able to create a mental image of something that is not physically present.

That indicates that she has moved from the sensorimotor to the preoperational level, in accordance with Piaget.

The complete question is attached in the attachment.

To learn more about the sensorimotor stage refer;

https://brainly.com/question/14780906

#SPJ1

The rod is stretched due to the force of gravitational attraction.

The magnitude of the deformation force on the rod is  -GMm×((1/r² + 1/(L+r)²)

The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.

The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.

F = GMm/R²

Given are two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M.  Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects.

Let the mass closer to the planet is A and the other is B

FA = Force on planet A = -GMm/r²

FB = Force on planet B = -GMm/(L+r)²

Net Force on the rod is given by the addition of the individual forces.

Fnet= FA + FB = -GMm/r² -GMm/(L+r)²

Fnet = -GMm×((1/r² + 1/(L+r)²)

Thus,  the magnitude of the deformation force on the rod is derived above.

A experience more force than B, so A will stretch out from B. Hence the force is stretching the rod.

Learn more about gravity.

brainly.com/question/4014727

#SPJ1

Answer:

6800

Explanation:

100 x 0.68=6800

Answer: 68

Explanation:

The provided question's answer is "Schwarzschild radius".

The conversion factor between mass and energy is the speed of light squared.

GM/r stands for gravitational potential energy, also known as energy per unit mass.

GM/rc² then has "mass per unit mass" units. In other words, as mass/mass splits out in a dimensional analysis, "dimensionless per unit."

The derivation yields a formula for time or space coordinate ratios requiring sqrt(1 - 2GM/rc²). This number becomes 0 when r=2GM/c2, or the formula becomes infinite if in the denominator. However, there is no justification for using c² as a conversion factor there. Consider the initial expression sqrt(1 - 2GM/rc²).

Assume that m is used as the test particle's mass instead of 1. Then you have sqrt(m - 2GMm/rc² and mass units. This expression denotes that the rest energy of the test mass m you introduced into the gravitational field is "gone" at that radius.

The 2 would be absent if the gravitational field were Newtonian. However, at the event horizon, Einstein gravity is slightly stronger than Newton gravity, resulting in the factor 2 in qualitative terms.

So, the given equation is of Schwarzschild radius.

Learn more about Schwarzschild radius here:

https://brainly.com/question/12647190

#SPJ10