WHAT IS THE LEWIS STRUCTURE OF FORMAMIDE

The mixture as per the question is endothermic reaction when the contents of the tube containing the equilibrium mixture turned a lighter color whenever the tube was placed into an ice bath.

Activation energy  can be defined as the minimum energy required by particles at the reactant side for a chemical reaction to occur. According to the reaction conditions, specifically for reversible reactions, reactants can in turn become products and vice versa.

Exothermic reaction can be defined as the process where the heat energy is liberated in the conversion of the reactants to products for the forward reaction. We know that the heat is created in this process a small part of the energy may be initially provided to activate the reactant particles but once the reaction is in ongoing state it produces good amount of heat energy to keep the process in flow.

The reverse reaction, we know that is the endothermic in nature. The heat energy is absorbed in the conversion of the products ( now reactants in the reverse reaction ) to reactants ( now products in the reverse reaction ), as a result of this more amount of  energy has to be initially and continuously supplied for them to overcome the activation energy barrier for the reverse reaction to occur and be sustained.

Learn more about endothermic reaction:

brainly.com/question/23184814

#SPJ4

Answer:

The solubility of sodium hydroxide decreases with increase of temperature. Equilibrium constant of an exothermic reaction decreases with increase of temperature. Due to this less heat is produced in the reaction and the effect of increased temperature is nullified.

10 g of an unknown compound is added to water to form a 7.89 molar solution. if two liters of solution are present,  the molar mass of the unknown compound is 0.64 g/ mol.

Given that :  

The mass of the compound = 10 g

The molarity of the compound = 7.8 M

The volume = 2 L

The number of the moles = molarity × volume in L

                                           = 7.89 × 2

                                           = 15.78 mol

The molar mass = mass / moles

                            = 10 / 15.78

                             = 0.64 g/mol

Thus, the molar mass of the given unknown compound is 0.64 g/mol.

To learn more about molar mass here

https://brainly.com/question/12127540

#SPJ4

The result of heating 1-propanol with in absence of an acid is 1-propene. In two processes, 1-propene is created from 1-propanol.

What applications does propanol have?

It helps with anxiety, treats cardiac issues, and shields against migraines. Propranolol is a medication that can be used to manage high blood pressure when you have a heart condition. Treat diseases like atrial fibrillation that result in an irregular heartbeat (arrhythmia).

Is propanol poisonous?

Consuming 1-propanol can result in death, loss of consciousness, slowing breathing and heartbeat, and bewilderment. Exposure to the skin may result in allergic or inflammatory reactions. Children, adolescents, & adults who may consume contaminated products are at a high risk of formaldehyde or 1-propanol poisoning.

To know more about propanol visit:

https://brainly.com/question/9345701

#SPJ4

Prior to melting, both compounds were solids at first. Both samples were the same mass. The melting point of substance A is the same as that of substance B.

Two pure substance samples are heated continuously, and temperature is measured as a function of time. Melting point is the temperature at which a substance changes state from a solid to a liquid (or, less frequently, liquefaction point). At the melting point, there is an equilibrium between the solid and liquid phases. Chemicals that are produced by the chemical industry can be divided into three groups based on the volume of production: bulk chemicals, fine chemicals, and chemicals found. Prior to melting, both components were solids at first. Both samples were the same mass. The melting point of substance A is the same as that of substance B.

Learn more about compounds here

https://brainly.com/question/12166462

#SPJ4

The key difference between test and negative control groups in an experiment is that Control groups check the mean effectiveness of an intervention whereas test use the technique of matching.

Assigning people on the basis of chance ensures that both known and unknown invalidating factors are cancelled out, and that this occurs automatically rather than being dependent on individual judgment and trustworthiness. In behavioral and social (as well clinical) research, the ideal scientific experiment is a so-called randomized controlled trial, briefly an RCT.

Members of control groups are not supposed to develop group cohesion because that would entail a contaminating factor in the experiment. Researchers are interested in the average response of individual members rather than in their behavior as a group (see Clinical Trials and Intervention Studies).

To know more about control group here

https://brainly.com/question/28601688

#SPJ4

This indicates that it is a proton acceptor, which qualifies it as a Bronsted base.

Any species that can accept a proton and needs one pair of electrons to bond to the H+start text, H, end text, start superscript, plus, end superscript is referred to as a Brnsted-Lowry base. Since water is amphoteric, it can function as both a Brnsted-Lowry acid and a base. A Bronsted-Lowry base is a compound that can accept a hydrogen ion, whereas a Bronsted-Lowry acid can donate one. A Lewis base is a substance that can give up two electrons, whereas a Lewis acid can take in two electrons.

Here,

It qualifies as a Bronsted base because this suggests that it is a proton acceptor.

To know more about Bronsted base,

https://brainly.com/question/148529

#SPJ4

We know that oven cleaners are basic in nature ranging pH from 11-13 and hence can change the universal indicator Blue or purple.

To learn more about universal indicator from the given link

https://brainly.com/question/26797119

#SPJ1

Milk of magnesia is typically absorbed in the stomach and small intestine. As an antacid, it neutralizes stomach acid, which can help to relieve symptoms of indigestion and heartburn.

Milk of magnesia is an oral suspension of hydrated magnesium carbonate in water. It is used as an antacid to neutralize stomach acid and relieve symptoms of indigestion and heartburn. It is typically taken by mouth and is absorbed in the stomach and small intestine. It is not absorbed into the bloodstream and does not have a systemic effect on the body. It can also be used as a laxative.

Learn more about milk of magnesia here:

https://brainly.com/question/22066653

#SPJ4

Considering the definition of molality, the molality of the KCl in the solution is 6.56 moles/kg.

Molality, or molal concentration, is the amount of a substance dissolved in a given mass of solvent. It is defined as the moles of a solute per kilogram of solvent.

The Molality of a solution is determined by the expression:

molality= number of moles of solute÷ kilograms of solvent

Molality in this case

In this case, you know:

mass of KCl= 105 g

mass molar of KCl= 74.55 g/mole

number of moles of solute= mass of KCl÷ mass molar of KCl= 105 g÷ 74.55 g/mole= 1.41 moles

Mass of solvent = 215 g of water= 0.215 kg (being 1000 g=1 kg)  

Replacing in the definition of molality:

Molality= 1.41 moles÷ 0.215 kg

Molality= 6.56 moles/kg

The molality of the solution is 6.56 moles/kg.

Learn more about molality:

brainly.com/question/20366625

#SPJ4

The Ksp expression for A2B3(s) in terms of [A] and [B] is Ksp,  the Ksp Equation for the specified solid is Ksp = 4x3.

Ksp = [a] [b]2, where Ksp is the maximum amount of solute that can dissolve at equilibrium. If you make x=a, you know that b=2x because there is twice as much b as a. Molar solubility is merely another word for molarity. These values for both a and b in respect of x allow you to calculate Ksp as [x] [2x]2, which equals Ksp=4x3.

∠K=∠K                           [Common]

∴  △KNP∼△KML        [By AA-criterion of similarity]⇒  KMKN =

ML

NP

[∵ Corresponding sides of similar triangles are proportional] ⇒   b+cc= ax⇒x= b+cac

​KSP=[x] [2x]2:

You may make Ksp equal to [x] [2x]2 with all those values a and conversely in terms of x, which implies that Ksp equals [x] [4x]3.

To know more about ksp visit:

https://brainly.com/question/27132799

#SPJ4

The difference between the two is the height of the mercury in the manometer (0.170 atm).

Mercury has the chemical symbol Hg and the atomic number 80. It was formerly known as hydrargyrum, derived from the Greek phrase hydor (water) as well as argyros (silver) (silver). Mercury is the one metallic element known to just be liquid at normal temperatures and pressures; the only other element known to be liquid under such conditions is indeed the halogen bromine, tho metals including caesium, gallium, but also rubidium melt a little above room temperature.

The height difference between the two sides of the mercury in the manometer that the student found was 0.890 atm - 762 Torr = 0.170 atm. This is because the pressure of the gas in the bulb (0.890 atm) is higher than the atmospheric pressure (762 Torr).

To learn more about mercury
https://brainly.com/question/24257702
#SPJ4

Answer:

0.648 g of Ag ( silver) is produced

Explanation:

First calculating the moles of the reactants given;

Cu = 5/64 = 0.078 moles

Mr ( molecular mass) of AgNO3 = 108 + 14 + (16 x 3)

= 170 g

Now the moles of AgNO3 ;

1/170 = 0.006 moles

setting up mole ratio to calculate the limiting reactant:

moles of Cu  :  moles of Ag

       1            :     2

       0.078   :      X

X = 0.078 x 2

   = 0.156 moles of Ag

moles of AgNO3  : moles of Ag

             2            :      2

           0.006      :      X

X = (0.006 x 2)/2

   = 0.006 moles of Ag

As silver nitrate ( AgNO3) gives the least number of moles of Ag therefore it is the limiting reactant and would control the amount of product formed.

Now the mass of Ag formed:

atomic mass x moles

= 108 x 0.006

= 0.648 g of Ag ( silver) is produced

0.24 grams needed to make this solutions.

What is meant by grams?

        4 °C, the temperature at which water has its maximum density.

Volume = 100 ml

Molarity (M) = 0.1M

Molecular weight of LiOH => 7 + 16 + 1= 24

Formula here we use is :- 1 × 1000 / 24 × 100

w = 0.24g

To learn more about grams refer to

https://brainly.com/question/28902645

#SPJ4

70 ml of 50% hydrocarbon solutions and 35 milliliter of 80% methane solutions must be combined.

Hydrocarbon methane (CH4) seems to be a main constituent of natural gas. Because methane is a contributor to global warming (GHG), its presence within the atmosphere has an impact on the planet's climate and temperature. There are many industrial (influenced by humans) and natural sources that release methane.

Large environmental sources of formaldehyde include termite digestion, emissions from waterways and oceans, and ocean currents. Agricultural output, landfills, raising of cattle and other animal animals (cow burps! ), and energy production are examples of sources that are related to activity.

To know more about methane visit:

https://brainly.com/question/30075504

#SPJ4

The wavelength will be longer the higher the magnitude of the fundamental quantum number to which the electron is hopping. Thus, the longest wavelength is produced by the n = 6 to p = 8 transition.

The length of a wave is expressed by its wavelength. The wavelength is the distance between one wave's crest and the following wave's crest. The wavelength can also be determined by measuring from the "trough" (bottom) of one wave to the "trough" of the following wave.

The distance that a wave repeats is measured by its wavelength. The letter lambda () stands for these recurrences, also known as wavelengths. Energy travels through a medium as waves (like the atmosphere, the vacuum, or even the ocean).

To know more about wavelength visit-

https://brainly.com/question/12924624

#SPJ4

Demand-pull inflation occurs when: C. producers need more money to make and distribute goods.

Demand pull inflation occur when there is no balance in aggregate demand and aggregate supply and this tend to occur when the demand for goods and service is higher that the supply.

Demand pull inflation arise when people have the money to buy goods but the goods or product in the market is not sufficient leading to scarcity of goods due to large demand of that goods in the market.

Based on this demand pull inflation tend to rise  because producers or manufacture need more money to produce  and distribute goods so as to equate demand and supply.

Therefore we can conclude that the correct option is C.

Learn more about demand pull inflation here:https://brainly.com/question/30091376

#SPJ1

The substance, whose empirical formula is NO2 and whose molecular mass is 92 g/mol, has the molecular formula N2O4 (dinitrogen tetroxide).

Empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of the atoms. This would be the compound's element with the smallest whole number ratio.

molecular formula = empirical formula × n

where "n" is the total number of components required to construct a molecular formula.

molar mass of your compound is 92 g/mol (Given)

It implies that molar mass of every atom in that molecule must equal 92 g/mol.

1×14.0067 g/mol + 2×15.9994 g/mol = 46.0055 g/mol

So, if one building block has a molar mass of 46.0055 g/mol, how many would you need to get the molecule?

46.0055 g/mol × n = 92 g/mol

n = 92g/mol / 46.0055 g/mol = 1.99976 ≈ 2

As a result, the substance's molecular formula, which includes a list of each atom that constitutes a molecule, will be

(NO2) × 2 = N2O4 (dinitrogen tetroxide)

To know more about empirical formula visit :

https://brainly.com/question/14425626

#SPJ4

The interactions that can be explained by hydrogen bonding  is the HF has higher boiling point than HCl and Ice H₂O, has solid structure with alternating H--O interactions .

The hydrogen bonding is the bonding form due to the dipole - dipole interaction between the hydrogen atom which is bonded to the highly electronegative atom. The hydrogen bonding is the type of  the intermolecular force. The hydrogen bonding are of the two types :

Thus the correct ones are the the HF has higher boiling point than HCl and Ice H₂O, has solid structure with alternating H--O interactions .

To learn more about hydrogen bonding here

https://brainly.com/question/10576216

#SPJ4

In order to find the rate of consumption of HCl in moles/s, you would need to know the balanced equation for the chemical reaction involving magnesium and HCl.

One common reaction is the reaction between magnesium and hydrochloric acid:

Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

If the rate of consumption of magnesium is 5.0 × 10^-9 mol/s, this means that 5.0 × 10^-9 moles of magnesium are being consumed per second. In this reaction, one mole of magnesium reacts with 2 moles of HCl, so for every mole of magnesium consumed, 2 moles of HCl are also consumed.

Therefore, the rate of consumption of HCl in moles/s can be calculated by multiplying the rate of consumption of magnesium by 2:

rate of consumption of HCl = (rate of consumption of Mg) * 2

rate of consumption of HCl = (5.0 x 10^-9 mol/s) * 2 = 1.0 x 10^-8 mol/s

So the rate of consumption of HCl in moles/s is 1.0 x 10^-8 moles/s.

The size of the family affects meal planning by determining the quantity of food needed and the number of people to serve.

Yes, a larger family typically requires more meal planning and preparation compared to a smaller family. This is because a larger family typically requires more food and ingredients, and often a wider variety of meals to accommodate different dietary needs and preferences. Additionally, a larger family may have more mouths to feed and therefore require more frequent meals and snacks throughout the day. Meal planning and preparation for a larger family can be more time-consuming and demanding, but with the proper organization and planning, it can be manageable.

To know more about Ingredients visit: https://brainly.com/question/30141107

#SPJ1

The motion of material is what is going on in Earth's mantle, powered by heat from the deep interior, moves tectonic plates on our planet's surface and this motion generates earthquakes, fuels volcanic activity, and shapes surface landscapes.

This is referred to as a layer inside a planetary body bounded below by a core and above by a crust and it is usually made up of rocks or ice which undergoes various forms of motion.

The motion which goes on in the mantle is as a result of the force which is generated from the heat in the deep interior which moves tectonic plates on our planet's surface as depicted in the diagram given.

The result is the formation of earthquakes, fuels volcanic activity, and and it also shapes the surface landscapes thereby making it the reason why it was chosen as the correct choice.

Read more about Mantle here https://brainly.com/question/349072

#SPJ1

Point (c) C on the potential energy diagram corresponds to the species shown to the right for the electrophilic nitration of benzene with hno3/h2so4.

There have been many other observed substitution reactions involving benzene; the five reactions that have proven to be the most beneficial are described here (chlorination and bromination are the most common halogenation reactions). The term "Electrophilic Aromatic Substitution" is usually used to refer to these reactions since the chemicals and conditions that are used in them are electrophilic. In order to carry out the first stage of the substitution reaction, the catalysts and co-reagents are used to produce the powerful electrophilic species that are required. The particular electrophile that was hypothesized to have a role in each distinct type of reaction is presented in the column to the right.

Point C on the potential energy diagram corresponds to the species shown to the right for the electrophilic nitration of benzene with hno3/h2so4.

The complete question is attached.

You can also learn about potential energy from the following question:

https://brainly.com/question/24284560

#SPJ4

The carbon-nitrogen link in the N-methylidene hydroxylamine molecule has a bond order of 2.

A molecule is the smallest unit of any material that is composed of one or more elements and is capable of existing independently while maintaining all of the substance's physical and chemical properties. Further atom division occurs within molecules. For instance, the symbols for the oxygen atom and molecule are O and O2, respectively.

Its original definition, "the smallest unit of a substance that yet preserves the qualities of that substance," was intended to be encompassed by this designation. "An atom is a body that cannot be cut in two; a molecule is the smallest conceivable component of a specific substance," wrote James Maxwell in 1873 when defining atom and molecule.

To know more about molecule visit:

https://brainly.com/question/19556990

#SPJ4

Answer: The correct answer is Option A. Compound Y will have the highest boiling point.

Intermolecular forces are the forces that hold the molecules of compounds together. The more the strength of these forces is more will be the force of attraction between them. Hence a compound having stronger intermolecular forces will be hard to break or boil.

So a compound having strong intermolecular force will have a high boiling point as it takes more energy to break apart these molecules.

In the given question compound Y has highest boiling point so it has the maximum intermolecular force between its atoms or molecules.

For more information on intermolecular forces ,click below:

https://brainly.com/question/1277429?referrer=searchResults

The total work performed is nRT * 0.693

The work done by an ideal gas during an expansion at a constant temperature from volume V to 2V can be calculated using the equation work = nRT * ln(Vf/Vi).

Where n is the number of moles of gas, R is the ideal gas constant, T is the temperature, Vf is the final volume and Vi is the initial volume.

In this case, the initial volume is V and the final volume is 2V, so

the work done is nRT * ln(2V/V).

Since ln(2) is equal to 0.693, the work done is nRT * 0.693. Keep in mind, this equation is only true for certain types of gas at specific temperatures and pressures.

Read more about ideal gas:

https://brainly.com/question/15634266

#SPJ4

Once an action potential reaches the end bulbs of a neuron, the first event in synaptic transmission is the release of neurotransmitters from the presynaptic neuron.

When an action potential reaches the end bulbs, it causes the opening of voltage-gated calcium channels in the presynaptic membrane. This influx of calcium ions into the presynaptic neuron triggers the release of neurotransmitters stored in vesicles at the synapse.

The neurotransmitters then diffuse across the synaptic cleft, the small space between the presynaptic and postsynaptic neurons, and bind to receptors on the postsynaptic membrane. This binding causes a change in the electrical or chemical properties of the postsynaptic neuron, leading to the initiation or inhibition of an action potential in the postsynaptic neuron.

It's worth noting that, this process is called synaptic transmission, it's the process by which an action potential in one neuron causes an electrical or chemical signal in another neuron, muscle cell or gland cell.

Phosphorus pentoxide is the chemical name for a molecule in which five oxygen atoms are bound to two phosphorus atoms (P2O5).

A potent drying & dehydrating agent is phosphorus pentoxide. P2O5 can be used in a wide range of processes, including the dehydrating of amides to nitriles, which requires for the elimination of a water molecule.

Triple super phosphate is the name given to the concentrated superphosphate, which contains 46% P2O5. It is possible to use this fertiliser on any soil and with any crop. It should be used along with organic manure on acidic soils. It may be used prior to, during, or after transplantation.

To know more about Phosphorus pentoxide visit :

https://brainly.com/question/28024394

#SPJ4

Phosphorus interacts with selenium to generate 77.6 mg of the compound from a sample of 40 mg of phosphorus. Therefore, phosphorus selenide has an empirical formula is P₃Se₁.

A compound's empirical formula is a formula that displays the ratio of the elements contained in the compound but not the precise number of atoms present in the molecule.

The molar mass of phosphorus (P) is 31 g/mol and selenium (Se) is 79 g/mol. Then, computing the moles of phosphorus, we get,

[tex]\begin{aligned}\text{moles of P}&=\mathrm{0.04\;g}\times\mathrm{\frac{1\;mole}{31\;g}}\\&=\mathrm{1.29\times10^{-3}\;moles}\end{aligned}[/tex]

The total mass is 77.6 mg. Then, the mass of selenium is (77.6-40)mg=37.6 mg=0.0376 g. Computing the moles of selenium, we get,

[tex]\begin{aligned}\text{moles of Se}&=\mathrm{0.0376\;g}\times\mathrm{\frac{1\;mole}{79\;g}}\\&=\mathrm{0.476\times10^{-3}\;moles}\end{aligned}[/tex]

Now, divide the mole value of smaller by the mole value of P and Se. We get,

[tex]\begin{aligned}\frac{1.29\times10^{-3}}{0.476\times10^{-3}}}&=2.71=3\\\frac{{0.476\times10^{-3}}}{{0.476\times10^{-3}}}&=1\end{aligned}[/tex]

Therefore, the required answer is P₃Se₁.

The complete question is -

A 40 mg sample of phosphorus reacts with selenium to form 77.6 mg of the compound. What is the empirical formula of phosphorus selenide?

To know more about empirical formulas:

https://brainly.com/question/14044066

#SPJ4

The molarity of 2500 ml of a solution that contains 160 grams of ammonium nitrate (nh4no3) is 0.600M.

Molarity is a measure of the concentration of a solution. The concentration of a solution can be determined by measuring the mass of the solute and the volume of the solution. Molarity is a useful measure when trying to understand how much of a solute is present in a given volume of solution. It can be used to compare the strength of different solutions, and also to calculate how much solute is required for a given volume. Molarity is an important concept in chemistry and is used in many areas of science.

To learn more about molarity
https://brainly.com/question/14469428
#SPJ4