What is the peak current through a 590 w room heater that operates on 220 v ac power?

Answers

Answer 1

The peak current through a 590 w room heater that operates on 220 v ac power is 5.86 A.

Description

The largest amount of current that an output is capable of providing for brief periods of time is known as the peak current.

When an electrical device or power source is turned on for the first time, a large initial current known as the peak current flows into the load, starting at zero and increasing until it reaches a peak value.

How is peak current determined?

For instance, the connection between RMS and Peak Current is as follows when the AC waveform is a perfect sine wave.

RMS Current is equal to Peak Current times 0.70 or Peak Current times 1.41.

The peak current or the RMS current?

An alternating current can be expressed using two numbers: RMS and peak. RMS and Peak differ most when it comes to peak.

Calculation

Here on we have

P = 500 W

V = 120V

Then according to the expression for current,

I = P/V

= 500W/ 120V

= 4.16A

Then for peak current is,

Imax = [tex]\sqrt{}[/tex]2I

= (1.41) (4.16A)

= 5.86A

To know more about peak current visit:

https://brainly.com/question/28169133

#SPJ4


Related Questions

Outer edge of a wheel of radius 0.650 m. the wheel rotates at a constant rate of 230 rev/min. what is the speed (in m/s) of the drop of glue?

Answers

Outer edge of a wheel of radius 0.650 m. the wheel rotates at a constant rate of 230 rev/min. The speed is 15.65 m/s.

The wheel is rotating at a rate of 230rev/min. Convert it into radians per seconds.

1 rev/min = 2πrad/60s

0.1047 rad/s

Now,

To calculate the angular velocity of the wheel rotating at a rate of 230rev/min.

ω=230rev/min × 0.1074 rad/s/rev/min

ω=24.081 rad/s

Now to find the speed

v=rω

where

r = 0.650

ω= 24.081 rad/s

Putting the values

v = 0.650× 24.081

v=15.65 m/s.

The speed is 15.65 m/s.

If you need to learn more about similar questions related to speed, click here

https://brainly.com/question/12975205

#SPJ4

A ball is dropped from rest from a cliff. after one second, about how quickly is the ball traveling if you neglect air resistance?

Answers

The ball dropped from rest from a cliff after one second will have a final velocity of: 9.8 m/s

The free fall formula and the procedure we will use is:

fv = g* t

Where:

fv = final velocityg = acceleration due to gravityt = time taken

Information of the problem:

g = 9.8 m/s².t = 1 sfv = ?

Applying final velocity formula we get:

fv = g* t

fv = 9.8 m/s² * 1 s

fv = 9.8 m/s

What is free fall?

It is when the object or mobile falls from a height (h) with a positive acceleration equal to the gravity, describing a vertical rectilinear travel.

Learn more about free fall at brainly.com/question/11257529

#SPJ4

How much standard benzoic acid (fm 122.12, density = 1.27 g/ml) should you weigh out to obtain a 100.0 mm aqueous solution of 250 ml?

Answers

A solution's concentration is a measure of how much solute has been dissolved in a given quantity of solvent or solution. A concentrated solution contains a significant amount of dissolved solute. In other words, it is the number of moles per unit volume of a solution. The standard unit for concentration is Molar or mol/dm3.

Given that:

Mass = x?

molar mass = 122.12

density = 1.27 g/ml

concentration = 100 mM = 0.1 M

volume = 250 ml

Since n = cv

And n = mass/ molar mass

Therefore,

mass/molar mass =concentration * volume

x/122.12 = 0.1 * 250

X = 3,053g

To learn more about the relationship between molar mass and mass of an element. Click, https://brainly.com/question/17400435

#SPJ4

Explain what reaction time has to do with freefall:

Answers

Answer: time is inversely proportional to acceleration and free-falling bodies have acceleration.

Explanation:

according to the first equation of motion ;

a=V-v/t

where V is the final velocity and v is the initial velocity. putting the value of a as g we get;

g=V-v/t

shows the relation of g and t(gravitational acceleration and time) of free-falling bodies.

How far from the heavy end of a 68.0-cm long bat would its center of gravity be if its is at one-fourth of the length of the bat?

Answers

The heavy end of a 68.0-cm long bat would be at 17cm far from  its center of gravity.

The location where an object's weight is equally distributed on all sides is known as its center of gravity. For all practical purposes, the behavior would be almost unchanged if you substitute a point mass for the body at the center of gravity. The stability of an object is intimately related to its center of gravity.

We can solve finding if the center of gravity is at one-fourth the bat's length if [tex]c_{g} = \frac{1}{4} L[/tex]

where L = length of bat

[tex]c_{g} =\frac{1}{4} (68.0)[/tex]

[tex]c_{g} = 17cm[/tex]

Therefore, the heavy end of a 68.0-cm long bat would be at 17cm far from  its center of gravity.

Learn more about  center of gravity here;

https://brainly.com/question/20662235

#SPJ4

Why do people with high blood pressure sweat

Answers

Answer: People may not sweat excessively because of the hypertension or higher blood pressure than 120/80 mm Hg. They are not directly related. It is possible that they get exhausted quicker than others, or they have anxiety (nervousness) and hence they sweat more. Normally excessive sweating comes from excessive activity from thyroid or pituitary glands.

A cannonball is launched horizontally off a 65 m high castle wall with a speed of 40 m/s. how long will the cannonball be in the air before striking the ground?

Answers

The cannonball will be in the air a time of: 3.6421 s

The horizontal launch formula we will use and the procedure is:

t = √((2 * h) / g)

Where:

t = timeh = heightg = gravity

Information about the problem:

h= 65 mg = 9.8 m/s²v= 40 m/st =?

Applying the time formula we have:

t = √((2 * h) / g)

t = √((2 * 65 m) / 9.8 m/s²)

t = √(130 m / 9.8 m/s²)

t = √(13.2653 s²)

t = 3.6421 s

What is horizontal launch?

Is the motion described by an object that has been thrown horizontally with no angle of inclination at a certain height and considers the effect that the force of the earth's gravity has on the thrown object.

Learn more about horizontal launch at: brainly.com/question/24949996

#SPJ4

The amplitude of a lightly damped oscillator decreases by 4.0 uring each cycle. what percentage of the mechanical energy of the oscillator is lost in each cycle?

Answers

Percentage of the mechanical energy of the oscillator is lost in each cycle is 8%

The mechanical energy can be written as the maximum kinetic energy. Hence,

E=Kmax

=12mv²

|\E=12mA²ω² .........(i)

On differentiating, we get

/dE=mAω²dA…. /(ii)

Dividing eq.(ii)by equation(i), we get

dEE(mechanical energy) =mAω²dA (1/2) mA²ω²

=2dAA

=2(4.0%)

=8.0%

The difference between the mean or equilibrium position and either extreme is the oscillation's amplitude. The particle oscillates completely back and forth from its mean position

Mechanical energy is the energy that is obtained by the things that do the work. The energy that an object possesses as a result of its motion or position is known as mechanical energy. Kinetic energy, or the energy of motion, and potential energy are two types of mechanical energy (stored energy of position)

To learn more about mechanical energy:

https://brainly.com/question/13552918

#SPJ4


A metal cube has a mass of 10 grams, and occupies 5 cubic centimeters of space.
What's its density?

Answers

Answer:

ρ (density) = M / V         mass / unit volume

ρ = 10 g / 5 cm^3 = 2 g/cm^3        density of the metal

Why is it jazardous ro look directly into the crucible when the magnesium first reacts with the oxygen?

Answers

Answer:it can blind you

Explanation:

when magnesium reacts with oxygen it creats a light bright enough to blind you

A unit of mass of steam is expanded in a cylinder in such a manner that no energy is added or lost as heat. what is this process called?

Answers

Adiabatic process is the process where a unit of mass of steam is expanded in a cylinder in such a manner that no energy is added or lost as heat.

A thermodynamic process known as an adiabatic process takes place when there is no exchange of mass or heat between the thermodynamic system and its surroundings. An adiabatic process, as contrast to an isothermal process, solely transfers energy as work to the environment.

The adiabatic process is a fundamental idea in thermodynamics and supports the theory behind the first law of thermodynamics.

Follow the link below to understand the meaning of thermodynamics

https://brainly.in/question/80654

#SPJ4

If the plane has a mass of 1380 kg and a wing area of 16.2m^2. What is the magnitude of the net vertical force (including the effects of gravity) on the airplane? The density of the air is 1.20 kg/m^3.

Answers

the magnitude of the net vertical force (including the effects of gravity) on the airplane is  = 10491.2 N

Evaluating :

Magnitude of net vertical force on airplane

= 68 × 16.2 m³/s

volume of air under the surface

= 58 × 16.2 m³/s

total upward thrust by air

=[ 68 + 58 ] × 16.2 m³ /s× 1.20 kg/m³ × 9.81

= 24029 N

Weight =1380 × 9.81

            =13537.8

the magnitude of the net vertical force (including the effects of gravity) on the airplane

                                             = 24029 - 13537.8

                                                  = 10491.2 N

Net vertical force :

The net force is the vector sum of all the forces that react on  an object. That is to say, the net force is the total  sum of all the forces, taking into account the fact that a force is a vector and two forces of same  magnitude and opposite direction will cancel each other out

What is meant by net force?

In mechanics, the web force is the vector sum of forces acting on a particle or object. the web force is a single force that replaces the effect of the original forces on the particle's motion. It gives the particle the identical acceleration as all those actual forces together as described by Newton's second law of motion.

Learn more about force :

brainly.com/question/12970081

#SPJ4

What is the symbol, atomic number, # of protons, # of electrons, atomic mass, rounded atomic mass, # of neutrons (show work), and period of: iron

Answers

The symbol of the element Iron is Fe, its proton number is 26, its atomic mass is 56, its electron number is 26  and finally Iron belong to period 4 of the periodic table.

What is an Element?

This is defined as a substance cannot be further broken down by any chemical reaction and examples include oxygen, nitrogen etc.

Iron is an element and has an atomic number of 26 with a mass number of 56 and is present in period 4 in the periodic table.

For all atoms with no charge, the atomic number is equal to the number of proton. The number of proton is also equal to the number of electron which is why they all have the same value of 26.

Neutron = atomic mass - atomic number

                = 56 - 26 = 30

Read more about Elements here brainly.com/question/18096867

#SPJ1

What mass of sucrose, c12h22o11 would be needed to obtain the same freezing point when dissolved in 200 g of water as 5.00 g of kcl?

Answers

45.90kg mass of sucrose, would be needed to obtain the same freezing point when dissolved in 200 g of water as 5.00 g of KCl.

We can obtain the freezing point of solution using:

Δ[tex]T_{f}[/tex] = i × [tex]K_{f}[/tex] × m

[tex]m = \frac{moles}{volume of solvent in kg}[/tex]

[tex]m = \frac{mass/molarmass}{0.2}[/tex]

[tex]m = \frac{5/74.55}{0.2}[/tex]

m = 0.3353moles/kg

Now, Δ[tex]T_{f}[/tex] = i × [tex]K_{f}[/tex] × m

Δ[tex]T_{f}[/tex] = 2 × (-1.86) × 0.3353

Δ[tex]T_{f}[/tex] = -1.2473°C

Now, for obtaining mass of sucrose , using the same formula of freezing point we get:

Δ[tex]T_{f}[/tex] = i × [tex]K_{f}[/tex] × m

-1.2473 = 1 × (-1.86) × [tex]\frac{mass/342.3}{0.2}[/tex]

-1.2473 = -1.86 × [tex]\frac{mass/342.3}{0.2}[/tex]

-1.2473 = -1.86 × [tex]\frac{mass}{68.46}[/tex]

mass = 45.90kg

Therefore, 45.90kg mass of sucrose, would be needed to obtain the same freezing point when dissolved in 200 g of water as 5.00 g of KCl.

Learn more about sucrose here:

https://brainly.com/question/24214907

#SPJ4

The smallest unit of matter that retain all of the physical properties of that type of matter is?

Answers

The smallest unit of matter that retain all of the physical properties  is Atom.

What is atom?

The smallest component of ordinary stuff that makes up a chemical element is an atom. Atoms that are neutral or ionised make up every solid, liquid, gas, and form of plasma. Atoms are very tiny, measuring approximately 100 picometers across.

A chemical element is uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or more negatively charged electrons that orbit it. The positively charged, comparatively hefty protons and neutrons that make up the nucleus may be present.

to learn more about atom go to -

https://brainly.com/question/6258301

#SPJ4

The graph in Figure 13 represents the motion of a car moving along a straight highway. Describe in words the car’s motion.

Answers

Answer:

increasing the speed o

Explanation:

direction change

The graph which shows the position of the object at a particular time is called a position-time graph. The position of the object is increasing with time.

What is a position time graph?

The graph which shows the position of the object at a particular time is called a position time graph.

In the given graph, The position of the object in the 1st minute was 50 m, and the position of the object in the 3rd minute was between 50 to 100. The position of the object at the 5th minute was in the range of 100 to 150 m.

The position-time graph shows the velocity of the object. The slope of the object gives the location of the object.

There are two types of graphs such as straight line graphs and curve graphs. If the graph is curved it is showing the slope of the object keeps on changing.

Therefore, The graph which shows the position of the object at a particular time is called the position-time graph. The position of the object is increasing with time.

To learn more about position time graph, refer to the link:

https://brainly.com/question/13693087

#SPJ2

If a pitcher throws a baseball with a speed of 89.0 mph, then how long is the ball in flight (in seconds)?

Answers

The baseball with a speed of 89.0 mph, has 8.12 s in flight

The formulas for the downward vertical launch and the procedures we will use are:

t max= v₀ / gt(of)=2*t max

Where:

v₀ = initial velocityg = gravityt max = time to reach maximum heightt(of) =  time of flight

Information about the problem:

g = 9.8 m/s²v₀ = 89.0 mpht max = ?t(of)=?

Converting the velocity from mph to m/s, we have:

89 mil/h * (1609,34 m / 1 mil) * (1h / 3600 s) = 39.786 m/s

Applying the maximum time formula for a downward vertical launch, we get:

t max= v₀ / g

t max= 39.786 m/s / 9.8 m/s²

t max = 4.06 s

Applying  the time of flight formula, we get::

t(of) =2 * t max

t(of) =2 * 4.06 s

t(of) = 8.12 s

What is vertical launch?

In physics vertical launch is the motion described by an object that has been launched vertically in which the acceleration is the earth's gravitational force.

Learn more about vertical launch at: brainly.com/question/13962796

#SPJ4

A climber whose mass is 51 kg hangs motionless from a rope. what is the tension in the rope?

Answers

The tension in the rope which a climber, that has a mass of 51 kg, is hang motionless is 499.8 N

The tension formula and the procedure we will use is:

T = m * g

Where:

T = tensionm = massg = gravity

Information of the problem:

T = ?m = 51 kg g = 9.8 m/s²

Knowing that the body is in equilibrium the tension of the rope is equal to the gravity force. Applying the tension formula and substituting values we have:

T = Fg

Fg = m * g

Fg = 51 kg * 9.8 m/s²

Fg = 499.8 N

What is force?

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

Learn more about force at: brainly.com/question/12970081

#SPJ4

You are given pure samples of ammonia, nh3(g), and nitrogen trifluoride, nf3(g). what prediction would you make concerning their standard molar entropies at 298 k?

Answers

The standard molar entropies at 298 K is

S°Ammonia < S°Nitrogen trifluoride.

How are standard entropies calculated?

The entropy of a substance can be calculated by measuring the amount of heat required to raise the temperature by a given amount in a reversible process. S° is the entropy of one mole of a substance in its standard state at one atmosphere of pressure.The difference between the sum of the molar entropies of the products and the sum of the molar entropies of the reactants can be used to calculate the change in the standard molar entropy of a reaction.The entropy or degree of randomness of one mole of a sample under standard state conditions is defined as standard molar entropy. The standard molar entropy unit is joules per mole Kelvin (J/molK).

To learn more about standard entropies refer to

https://brainly.com/question/26117248

#SPJ4

Place the following types of electromagnetic radiation in order of increasing wavelength. Ultraviolet light, gamma rays, microwaves.

Answers

in order of increasing wavelength gamma rays <UV light,<Microwaves

We need to describe the relationship for electromagnetic wave ordering that is provided by:

Light travels at a speed of c=*v. The wavelength and frequency of the waves are and, respectively.

Then, since we are aware that the gamma ray (1018 1/s) has the highest frequency of these radiations and the microwave (108 1/s) has the lowest, we may say:

The ultraviolet spectrum is placed between microwave and gamma radiation at frequencies of 1016 1/s.

We can arrange these radiations from short to long wavelengths in the following manner:

gamma rays <UV light,<Microwaves

To learn more about wavelength:

https://brainly.com/question/12621145

#SPJ4

A car , mass = 2000 kg, is traveling on a highway at a velocity of 20 m/s when it ploughs into a number of sand bags. the sandbags stop the car in 4.0 m what is the force on the car?

Answers

The force on the car is 1×10^5 N.

The work-energy theorem states that when a force displaces a body, the change in kinetic energy of the body is measured. Conversely, when an opposing force is applied to a body, the kinetic energy of the body decreases by the same amount. It loses kinetic energy. The bodies' loss of kinetic energy is equivalent to the labor they put into resisting the opposing force.

mass of the car, m = 2000 kg

the velocity of car  , v = 20 m/s

distance traveled, s = 4 m

let the force on the car be F

using work-energy theorem

[tex]F\times s\times cos(180) = 0.5 \times m \times ( 0 - v^2)[/tex]

[tex]F \times 4 \times(-1) = 0.5\times 2000 \times ( 0 - 20^2)[/tex]

solving for F

[tex]F = 1 \times 10^5 N[/tex]

the force on the car is [tex]1 \times 10^5 N.[/tex]

To learn more about the work energy theorem refer to the link:

https://brainly.com/question/16995910

#SPJ4

To calculate the components of the initial velocity (vvivvi), you have to identify the correct motion equations.
A golfer hits a golf ball that travels 60 m across the field and takes 3.2 seconds to reach the ground.
What is the horizontal component of initial velocity?

Answers

Horizontal component of initial velocity = Vx = Cosθ x 18.75m/s


An object that is given an initial velocity and then affected by gravity is referred to as a projectile. These effects determine the course that the object takes. The object's trajectory is what we refer to as. A projectile's trajectory is determined by velocity in two dimensions. The projectile's x and y components each represent its horizontal and vertical motion, respectively. Meters are the units used to indicate both horizontal and vertical distances (m). Meters per second (m/s) is the unit used to express the horizontal and vertical velocities.

A projectile is in freefall once it has started moving. Gravity's downward acceleration is the sole acceleration that is having an effect on it. The magnitude of the acceleration caused by gravity (on Earth) is

To learn more about the Horizontal component please visit-
https://brainly.com/question/14919796
#SPJ4

A bike starting from rest acquires a speed of 40m/s in 20 seconds. Then, the bike travels with this speed for 15 seconds. Find the : Acceleration Distance travelled during acceleration, ,total distance travelled ​

Answers

Explanation:

i hope you can understand my calligraphy :)

The acceleration of the bike is 2 m/s². The distance traveled during acceleration is 100 m. The total distance covered by bike is 700m.

What is the equation of motion?

The equations of motion can be described as the relationship between the acceleration (a), velocity, time (t), and displacement of a moving object.

The equations of motions can be demonstrated as follows:

[tex]v = u + at\\S = ut +(1/2)at^2\\v^2-u^2= 2aS[/tex]

Given, the initial speed of the bike, u = 0

The final speed of the bike, v = 40 m/s

The time takes to get this speed, t = 20 s

v = u + at

40 = 0 + a(20)

a = 2 m/s²

The distance traveled during acceleration, v²- u²= 2aS

(20)² - (0) = 2 ×2 ×S

S = 100 m

The total distance covered by the bike:

For the next 15 seconds, Distance = v ×t = 40 × 15 = 600 m

The total distance covered by bike = 100 + 600 = 700 m

Learn more about the equation of motion, here:

brainly.com/question/16982759

#SPJ2

HELP ME! WILL GIVE BRAINLIEST!

Answers

Answer:

Synthesis(Two substances that react to form one product): A + C -> AC

Decomposition(A compound that breaks down into two+ more substances): AB -> A + B

Single Replacement(replaced by another substance): A + BC -> AC + B

Double Replacement(Two substances replaced): AB + CD -> AD + CB

Combustion(A reaction between oxygen and another substance such as water) : CH + O2 -> CO2 + H2O

So that would mean that

[tex]H_{2}O + SO_{3} - > H_{2}SO_{4}= Synthesis 2H_{2}O_{2} - > 2H_{2}O + O_{2} = DecompositionPb(No_{3})_{2} + 2KI - > 2KNO_{3} + PbIx_{2} = Replacement C_{3}H_{8} + 50_{2} - > 3C0_{2} + 4H_{2}O - Combustion[/tex]

Explanation:

An airplane accelerates at 5.0 m/s2 for 30.0 s. during this time, it covers a distance of 10.0 km. what are the initial and final velocities of the airplane?

Answers

The initial velocity of the airplane is 258.3 m/s and then final velocity of the airplane is 408.3 m/s.

Description

When gravity first exerts force on an object, its initial velocity defines how quickly the object moves.

The final velocity, on the other hand, is a vector number that gauges a moving body’s speed and direction after it has reached its maximum acceleration.

Calculation

According to laws of motion,

x = Vi*t = 1/2 at^2

Substituting all the values we have,

10^4 = vi (30) + 0.5(5)(30)

Simplifying it,

Vi = 258.3 m/s

According to motion equations,

Vf = Vi + at

Substituting all the values,

Vf = 258.3 + (30)(5)

Vf = 408.3 m/s

So, we have Initial velocity = 258.3 m/s and final velocity = 408.3 m/s

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

A block is released from rest and slides down a ramp. The surface of the ramp has three rough sections where the friction between the surface and the block is not negligible, as shown by the shaded regions above. Measuring which of the following will allow for the best estimate of the block’s instantaneous acceleration when the block is at the midpoint of the ramp?

Answers

The speed of the block at points just before and just after the midpoint and the time its takes the block to travel between them.

What is acceleration ?

The rate at which speed and direction of movement change over time is referred to as acceleration. When something moves faster or slower, it is said to be accelerating. Motion on a circle increases even while the speed is constant because the vector is always changing.

What is an object's acceleration?

According to Newton's second law of motion, an object's acceleration is equal to the net force applied to it divided by its mass, or a = F m. Given an object's mass and the net pressure exerted on it, one can use this acceleration equation to calculate its acceleration.

To know more about Acceleration visit:

https://brainly.com/question/2303856

#SPJ1

A bus leaves Houston at 6am headed toward Austin at a constant speed of 54.3 miles/hr. If Austin is located 190 miles west of Houston, approximately when will the bus arrive in Austin?

Answers

resolved for the constant speed as the ratio of distance and time. We have B as the speed, the, as the distance at the at the time it is given that the bus leaves easter and other exactly six o'clock in the morning In Travis at a constant speed of 54.3 mph to Austin, which is located at a distance of 190 miles away. We want to find the arrival time. So first is that satisfying the time of travel to suffer the time from the given equation. And we have B equals distance divided by the speed. The distance is 190 miles and the speed is 54.3 mph. We get time here in terms of R. S. S 3.5, So it takes three hours and three hours and 30 minutes to travel, he said distance. So if it's if the bus departs at the at the time of six of clubs, So three hours and 30 minutes after that, it will arrive to Austin. So that means the arrival time will be nine 30 in the morning, So that's three hours and 20 minutes. Oh, after six o'clock. So I hope everything is clear.

The scientific method can easily be misinterpreted as ___________. question 1 options: a great "magical trick", or slide of hands, rather than factual an "auto mechanics" guide to science investigation a "cookbook" recipe with linear steps for performing scientific investigations

Answers

It can be misinterpreted as a "cookbook" recipe for performing scientific investigations.

What one word best describes the scientific method?

Through testing and experimentation, the scientific method is established through an unbiased manner.

The fundamental steps in these findings are Making an observation, formulating a hypothesis, making a prediction, carrying out an experiment, and then evaluating the findings.

Can any question be answered using the scientific method?

There are limitations to the scientific process. Only quantitative data from observable, quantifiable, and repeatable experiments can it provide objective answers to questions.

It cannot provide an objective response to queries based on personal convictions or preferences, such as whether there are ghosts or deities present or who makes the finest doughnut.

What questions cannot be solved by science?

The presence of any supernatural being or God cannot be established or disproven by science. Sometimes, attempts to provide a hand using scientific concepts.

To know more about scientific method, visit:

https://brainly.com/question/7508826

#SPJ4

After 55 years, what mass (in g) remains of a 200.0 g sample of a radioactive isotope with a half-life of 10.0 years?

Answers

By the half-life of radioactive, the remaining mass of radioactive elements is 4.42 grams.

We need to know about the half-life of the radioactive elements to solve this problem. The radioactive element will decay over time and follow the equation

N = No(1/2)^(t/t'')

where N is the final quantity, No is the initial quantity, λ is the decaying constant, t is time and t'' is the half-life of a radioactive element.

From the question above, we know that

t'' = 10 years

No = 200 g

t = 55 years

Calculate the remaining mass

N = No(1/2)^(t/t'')

N = 200(1/2)^(55/10)

N = 4.42 grams

Find more on half-life at: https://brainly.com/question/25750315

#SPJ4

An object is dropped from a roof of a building of height h. during the last second of its descent, it drops a distance h/3. calculate the height of the building.

Answers

An object is dropped from a roof of a building of height h, the height of the building is 145.5 m.

Calculation

It is given that

[tex]y_{last}[/tex]= h/3

[tex]t_{last}[/tex]= 1s

g= 9.8 m[tex]s^{-2}[/tex]

In first stage,

t1= (t-1)s  y1 = 2h/3

vi1 = 0

according to the kinematic equation,

y1= v1t1 + 1/2 g[tex]t1^{2}[/tex]

then substituting all the values, we have

2h/3 = 1/2(9.8)[tex](t-1)^{2}[/tex]

⇒ h = 7.35[tex](t-1)^{2}[/tex] → 1

Then the final velocity can be calculated by

vf1=[tex]vi^{2}[/tex]+ g(t - 1)

vf1= 9.8(t - 1)

In the second stage,

t2= 1s

y2= h/3

g=9.5 m[tex]s^{-2}[/tex]

vi2 = vf1 = 9.8(t - 1)

Acoording to kinematic equation,

y2 = vi2 t2 + 0.5g[tex]t1^{2}[/tex]

substituting the values,

h/3 = 9.8(t - 1) + 4.9

⇒ h= 29.4(t - 1) + 14.7 → 2

From equation 1 and 2, we get,

7.35[tex](t-1)^{2}[/tex] = 29.4(t - 1) + 14.7

if we assume (t-1) = R, we get

7.35[tex]R^{2}[/tex] - 29.4R - 14.7 =0

⇒R = 4.45

t = R+1 = 5.45s

substituting the value of t in equation 1, we have

h= 7.35[tex](4.45)^{2}[/tex] = 145.5m

Thus, the height of the building is 145.5m.

To know more about kinematic equations, visit:

https://brainly.com/question/24458315

#SPJ4

Other Questions
How did the increased industrialization of Europe affect the slave trade How many orbitals are completely filled in an atom that has 14 electrons? The electron configuration is 1s22s22p63s23p2. Find the greatest common factor of 24, 40 and 60. In the movie style wars, what was the name of the graffiti writer who tagged over the other graffiti writer's work? According to Obama, what can all people do following the Trayvon Martin commonlit When driving, your right wheels run off the pavement onto the shoulder of the road. you should first:_________ The setting of a trap by two San males in this photograph is indicative of which of the following Brian spent 14 minutes washing the dishes. That was 35% of the total number of minutes he spent doing chores.How many minutes did Brian spend doing chores? A good way to begin organizing things is to:A. put them into separate piles or categories.B. move everything to a very large space.C. reduce waste or clutter as much as possible.D. label them all with a highlighter pen. How is a laser printer calibration commonly performed? through the printer menu with a multimeter with a special tool provided in the maintenance kit with calipers Which expressions are simplified? Pls help!! What effect have the Rockies had on traditional transportation routes in western North America? How did this affect Indigenous peoples and European explorers? 2x_____=2x10^=______ please help!!!!!!!!!!!! Select the correct answer from each drop-down menu. who first discovered gold, where did he find it, and how was he rewarded? in 1848, found gold in california while trying to build a sawmill on the south fork of the american river. this quickly led to the gold rush. unfortunately, he did not gain a profit from the discovery but was given compensation of per month when he turned 62 years old. when he died, there was not enough money to pay for his burial. PLEASE HELP ASAP WILL MARK BRAINLIESTSHARKS' TEETHLangston CarterThe day we found the sharks' teeth was foggy and cool. Moisture hung in the air so thick you could almost see it sparkling in the dim sunlight. There were days, early in the summer like this one, where it seemed there was more water in the air than in the bay. We had beached the boat and stepped out on the recently cleared spit of land. The ground had a light dusting of white sand over an under layer of dried black mud. It looked like a recently frosted chocolate cake, though the frosting was spread a bit thin for my taste. The ground was solid, but we knew from experience that it was full of fiddler crab holes, and would be underwater at the first super-high tide. Mysteriously, to us anyway, someone wanted to build a house there.We often came to these spots to look for artifacts. Our beach, our summer home, had been a fishing camp for as long as anyone living could remember. The oldest stories told of travelers coming down to the edge of the sea, lining up to fill their wagon beds with salted fish to take back home. Old decaying cabins still lined the beach. Rotting nets, hung out to dry in the last century, decorated their weathered walls. Their broken faces spun stories in our minds. The fishermen who, tanned and wrinkled from sun and salt, hauled their nets full of splashing mullet in to cheers from the waiting crowds. The bounty of the sea lightened everyone's hearts, and the smell of roasting fish filled the damp air. Women fanned themselves from wagon seats. Children splashed in the shallow edges of the bay. It was a scene we had acted out as youngsters, building an imaginary bridge to a life we would never fully know.Read this sentence from the text:Their broken faces spun stories in our minds.What is the main effect of the word faces in this sentence? It creates a feeling of despair. It creates the idea of something watching. It suggests the narrator has great fears. It implies a sense of history. Why did Bienville start a war with the Chitimacha?The Chitimacha stole food and supplies from a French settlementThe Chitimacha killed a French enslaverThe Chitimacha had furs they would not trade with Bienville List the following events in the correct chronological order.The Boston Tea Party occurred.Britain repealed all of the Townshend Acts except the tea tax.The Boston Massacre occurred. If you were to raise prices of a cup of ice cream by $1, by how much would quantity demanded change (in terms of ice cream cups)? please help. The question is attached. Do only C,D,E,F,G Slavery and States Rights were two large issues resulting in a country rife with sectionalism. What OTHER two issues divided the U.S leading to war between the North an the South?