Hi There!!
Your best answer choice is:
C. It converts electric energy to another form of energy.
Because, A electric toaster is considered a resistor because it coverts some of it energy into another form which is heat. a resistor is something that limits the flow of an electric current through a circuit.
[tex]GoodLuck!![/tex]
[tex]_{Loserbrazts}[/tex]
An electric toaster is considered a resistor because it converts electric energy to another form of energy. Therefore, the correct option is option C.
What is resistor?A "resistor" is a passive components electric device that is utilized to limit and regulate the electric current that flows in electrical circuits. It also allows us to provide a variable amount of resistance to something like an electrical circuit. Resistors are the most significant and widely utilized components in an electrical circuit.
The primary function of a resistor would be to decrease current flow but also voltage inside a specific area of the circuit. It is constructed of copper wires wound around with a ceramic rod and covered with insulating paint. Toaster converts electric energy to another form of energy.
Therefore, the correct option is option C.
To learn more about resistor, here:
https://brainly.com/question/27213213
#SPJ6
Students conduct a lab in which they neutralize an acid. Which of the following
is the last thing students should do before leaving the lab area?
The missing group of choices is as follows:
A. disassemble the equipment.
B. wash their hands.
C. record their observations.
D. clean the lab tables.
Answer:
The correct answer is - B. washing their hands.
Explanation:
Neutralization of an acid involves the reaction of the acid with a strong or week base ( on the basis of acid strength) which leads to the production of salt and water in aqueous solution.
Washing hand acid could be more dangerous as the acid reacts violently with water, however, after the neutralization of acid, there should be normal safety measures which are before leaving the lab one should wash their hand as chemicals used might be toxic or cause harmful effect to an individual.
Thus, the correct answer is - B. washing their hands.
Which of the following is a neutralization reaction?A. Na2O(s) + H2O(a) rightarrow 2NaOH(s).B. 4Na(s) + O2(g) rightqrrow 2Na2O(s).C. NaOH(s) + HCl(aaq) rightarrow NaCl(s) + H2O(aq).D. 2Ca(s) + O2(g) rightarrow 2CaO(s).
Answer:
C. NaOH(s) + HCl(aaq) rightarrow NaCl(s) + H2O(aq)
Explanation:
A neutralization reaction may be defined as the reaction where an acid when it reacts with some base, the products formed are a salt and water.
Simply, we can write,
acid + base ---> salt + water
Here in option (C),
NaOH is sodium hydroxide is an base
HCl is hydrochloric acid
NaCl is sodium chloride and is the common salt
H20 is water
So, option C). NaOH(s) + HCl(aaq) -----> NaCl(s) + H2O(aq) is a neutralization reaction.
Ammonium phosphate [(NH4)3(PO4)] is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid H3PO4 with liquid ammonia. Calculate the moles of ammonium phosphate produced by the reaction of 1.50mol of ammonia.
Answer:
The correct answer is 0.50 mol (NH₄)₃PO₄
Explanation:
The balanced chemical equation between liquid ammonia (NH₃) and H₃PO₄ is the following:
3 NH₃ + H₃PO₄ → (NH₄)₃PO₄
According to the equation, 3 mol of ammonia produce 1 mol of ammonium phosphate. Thus, the stoichiometric ratio is 1 mol (NH₄)₃PO₄/3 NH₃. To calculate the moles of (NH₄)₃PO₄, we multiply the ratio by 1.50 mol NH₃:
1.50 mol NH₃ x 1 mol (NH₄)₃PO₄/3 NH₃ = 0.50 mol (NH₄)₃PO₄
40 points
Examine the table and write down what should be in each row below.
Write your answers on different lines for each row and place a common in
between each answer in that same row.*
Name
Symbol
Atomic
number
Mass
Number
Number of
neutrons
Number of
Electrons
Charge
Lithium-5
su
3
SB
1601
ISN
7
25Na
187
Your answer
Answer:
I am so confused about this i am so sorry but i cant there is to much going on
Explanation:
Sun2
Sun3
Sun4
Sun5
Sun6
Sun7
Sun8
Sun9
Sun10
2.600 * 10 ^ - 5 * 6.100 * 10 ^ - 5 Express in scientific notation
Answer:
hope its help you
Explanation:
2.600 × 10^-5 × 6.100 × 10^-5 = 1.586 × 10-9
Angela wrote some lines of code that she wants to test. She will need to use
Answer: A Prompt
Explanation:
Answer: for the answer a prompt is wrong the right answer is idle
Explanation: this is correct for edge 2020 trust me sorry if im wrong
Which of the following is an example of a quantitative observation? a. The piece of metal is longer than the piece of wood. b. Solution 1 is much darker than solution 2. c. The liquid in beaker A is blue. d. The temperature of the liquid is 60°C. e. At least two of the above (A-D) are quantitative observations.
Answer: d. The temperature of the liquid is 60°C.
Explanation:
A quantitative observation is an observation of measure of variables sing in the study or experiment . Variables can be length, weight, temperature , volume etc which can be measured.
From all the given options only option d. is describing a measure ( 60°C).
Hence, an example of a quantitative observation: "The temperature of the liquid is 60°C."
So correct option is d.
Which element on the periodic table in the 8th column has the largest radius
Answer:
D. Rn
Explanation:
The radius increases as you go down the column
Periodic table is the arrangement of chemical elements in order of their atomic number. Atomic number of chemical elements is the number of protons in the nucleus of an atom of that chemical element.
Atomic Radius is the distance between the nuclei of two atoms of a chemical element.
Atomic Radius of chemical elements increases from top to bottom on the periodic table.
He (Helium)
He (Helium)Ne (Neon)
He (Helium)Ne (Neon)Ar (Argon)
He (Helium)Ne (Neon)Ar (Argon)Kr (Krypton)
He (Helium)Ne (Neon)Ar (Argon)Kr (Krypton)Xe (Xenon)
He (Helium)Ne (Neon)Ar (Argon)Kr (Krypton)Xe (Xenon)Rn (Radon)
Radon (Rn) has the largest atomic radius amongst the chemical elements in column 8 of the periodic table.
Read more:
https://brainly.com/question/16944433?utm_source=android&utm_medium=share&utm_campaign=question
How many significant figures? A) 1234500_______ B) 1230.0_____ C) 0.10220____ D) 34560000______ E) 0.0000302010_______ F) 0.02050______ G) 1.250 x 105_____
Answer:
A) 5 sig figs
B) 4 sig figs
C) 4 sig figs
D) 4 sig figs
E) 5 sig figs
F) 3 sig figs
G) 5 sig figs
Explanation:
work for G- 1.250 x 105= 131.25
Significant digits/ figures are indeed the number in a value, typically a measure the contributes to the stock's accuracy. It's very first non-zero digit is being used to begin counting significant digits.
Any digits else than zero are relevant. In this, the number of digits is used to express a measurable or calculated amount.
Given:
[tex]A)\ 1234500 \\\\ B)\ 1230.0\\\\ C)\ 0.10220\\\\ D)\ 34560000\\\\ E)\ 0.0000302010\\\\ F)\ 0.02050 \\\\ G) \ 1.250 \times 10^5 \ \ OR\ \ 1.250 \times 105[/tex]
To find:
Significant figures=?
Solution:
For A, there are 5 significant figure.For B, there are 5 significant figure with 1 decimals.For C, there are 5 significant figure with 5 decimals.For D, there are 4 significant figure.For E, there are 6 significant figure with 10 decimals.For F, there are 4 significant figure with 5 decimals.For G, there are 9 significant figure with 8 decimals OR it has 3 significant figure.Learn more:
brainly.com/question/14804345
Describe one limitation of geothermal energy?
All of the statements describe hydrogen bonds EXCEPT: a. Hydrogen bonds account for the anomalously high boiling point of water. b. In liquid water, the average water molecule forms hydrogen bonds with two to three other water molecules. c. Individual hydrogen bonds are much weaker than covalent bonds. d. Individual hydrogen bonds in liquid water exist for many seconds and sometimes for minutes. e. The strength of a hydrogen bond depends on the linearity of the atoms involved in the bond.
Answer:
The correct option is e
Explanation:
Hydrogen bond is an intermolecular interaction/bonding that are formed between an electronegative atom (such as nitrogen, oxygen and fluorine) and a hydrogen atom. They are weak intermolecular bonds compared to covalent bonds but account for the high boiling point of water because of the strong hydrogen bond presence between the water molecules. Water molecules form hydrogen bonds between each other; since an oxygen atom (in a water molecule) has two lone pairs on it's outermost shell, it forms an hydrogen bond with two hydrogen atoms of other water molecule. Due to the fluidity of liquid water molecules, hydrogen bonds keep getting broken (although recreated/formed almost immediately), hence, individual hydrogen bonds in liquid water does not exist for long.
In the explanation above, it was stated that the strength of the hydrogen bond in water is the reason for it's high boiling point. The atoms in a water molecule are bent NOT linear hence the strength of hydrogen bond does not depend on the linearity of the atoms involved in the bond.
Answer now!!! Is air an element?
Answer:no
Explanation: air is made of matter and matter is not an element
Answer: "Air is one of the four classical elements in ancient Greek philosophy and in Western alchemy."
what are the inputs and outputs of a hydroelectric dam?
(science 7th grade)
Answer:
Does this help?
Why do Christians call Jesus "the Christ”? Christ comes from the Greek word for Messiah. Christ comes from the Greek word for salvation. Christ comes from the Latin word for Nazareth. Christ comes from the Latin word for Resurrection.
Answer:
it is A
Explanation:
Its on edge
Christians call Jesus "the Christ” because of the meaning behind the word. The term “Christ” comes from the Greek word “Christos” which means “the anointed one” or “the messiah”.
What is the reason for giving this title to Jesus ?This title was given to Jesus because of the many prophecies in the Old Testament that foretold of a coming messiah who would save the people of Israel from their enemies and bring peace and justice to the world.
The term “Christ” is also associated with the Latin word “Nazareth”, which is the town where Jesus was born. This further reinforces the idea of Jesus as the messiah, as it was prophesied that the messiah would be born in Bethlehem, which is a town near Nazareth.
Finally, the term “Christ” is also associated with the Latin word “resurrection”. This is because Jesus was believed to have been resurrected from the dead, which was seen as proof of his divine power and the fulfillment of the prophecies about the messiah. This further emphasizes the idea of Jesus as the messiah and savior of the world.
In conclusion, Christians call Jesus “the Christ” because of the meaning behind the word and because of the many prophecies in the Old Testament that foretold of a coming messiah who would save the people of Israel from their enemies and bring peace and justice to the world. The term is also associated with the Latin words “Nazareth” and “resurrection”, which further emphasize the idea of Jesus as the messiah and savior of the world.
Learn more about Testament at:
https://brainly.com/question/29841015
#SPJ3
A mass of 2 kg of acetylene is in a 0.045 m3 rigid container at a pressure of 4.3 MPa. Use the generalized charts to estimate the temperature.
Answer:
361 K
Explanation:
From the tables:
[tex]P_r=4.3/6.14=0.7,T_c=308.3\ K, R=0.2193\ kJ/kgK\\\\Volume (V)=0.045m^3, mass(m)=2kg\\\\v=V/m=0.045/2=0.0225\ m^3/kg[/tex]
Given that:
[tex]v=\frac{ZRT}{P}[/tex]
From the charts, at [tex]P_r=0.7,Z_g=0.59,T_r=0.94[/tex]
[tex]v_g=\frac{0.59*0.3193*0.94*308.3}{4300}=0.0127\ m^3/kg\ which\ is\ small\\ \\At\ T_r=1,Z=0.7,v=\frac{0.7*0.3193*1*308.3}{4300}=0.016\ m^3/kg\\\\At\ T_r=1.2,Z=0.86,v=\frac{0.86*0.3193*1.2*308.3}{4300}=0.0236\ m^3/kg[/tex]
Interpolating, we get [tex]T_r=1.17[/tex], T = 361 K
What is the [A-]/[HA] ratio when the weak acid is in a solution two pH units above its pKa?a. 5:1b. 10:1c. 100:1d. 1:10e. 1:2
Answer:
c. 100:1.
Explanation:
Hello,
In this case, considering the Henderson-Hasselbach equation:
[tex]pH=pKa+log(\frac{[A^-]}{[HA]} )[/tex]
And the pH two units above the pKa:
[tex]pH=pKa+2[/tex]
We obtain the required ratio as follows:
[tex]pKa+2-pKa=log(\frac{[A^-]}{[HA]} )\\\\\frac{[A^-]}{[HA]} =10^2=100[/tex]
Which is also a c. 100:1 ratio containing 100 parts of base per 1 part of acid.
Regards.
According to Henderson - Hawelbach equation:
[tex]\to pH = pka + \log (\frac{A^{-}}{HA})...........(a)[/tex]
According to question pH two unit above pka:
[tex]\to pH = pka + 2[/tex]
Put value of PH is equation (a)
[tex]\to pKa+2=pKa+ \log (\frac{A^{-}}{HA})\\\\\to 2= \log (\frac{A^{-}}{HA})\\\\\to (\frac{A^{-}}{HA})= 10^2\\\\\to (\frac{A^{-}}{HA})= 100\\\\[/tex]
So, the ratio is [tex][100 : 1][/tex]
Therefore, 100: 1 Ratio containing 100 part of base per 1 part of acid.
Learn more:
brainly.com/question/3934133
what animal is most like to harmed when a beaver builds a dam
Answer:
Small fish or insects.
Explanation:
If Nurse Antonio adds that 7 grams of NaCI to water to make 1 liter of solution, what is the molar concentration of the solution? Use dimensional analysis and show how you completed the unit conversion.
Given :
Nurse Antonio adds that 7 grams of NaCI to water to make 1 liter of solution.
To Find :
The molar concentration of the solution .
Solution :
Molecular mass of NaCl , [tex]m=58.44\ g/mol[/tex] .
Now , number of moles is given by :
[tex]n=\dfrac{\text{Given weight}}{\text{Molecular Mass}}\\\\n=\dfrac{7}{58.44}\ mole\\\\n=0.12\ moles[/tex]
Molarity is given by :
[tex]M=\dfrac{\text{Number of moles}}{\text{Volume ( in Liters)}}\\\\M=\dfrac{0.12}{1}\ M\\\\M=0.12\ M[/tex]
Hence , this is the required solution .
What is the percent by mass of glucose in a solution made by dissolving 163 g glucose in 755 g water? Do you need to know the formula of glucose to do that calculation?
Explain
Answer:
Explanation:
%mass of glucose =( mass of gucose /mass of solution )x100%
= 163 / (755+ 163 )
= 17.76 %
A potassium ion (K+) would most likely bond with _____.
Mg+
O
Cl-
Na+
Answer:
Chlorine
Explanation:
Answer:
That would be the negative ion: Cl-.
A gas in a 6.2 mL cylinder has a pressure of 1.4 atmospheres. A piston is pushed in until the gas volume is 3.1 mL, while the temperature remains constant. What's the final pressure of the gas in the cylinder?
Answer:
2.8 atm.
Explanation:
From the question given above, we obtained the following data:
Initial volume (V1) = 6.2 mL
Initial pressure (P1) = 1.4 atm
Final volume (V2) = 3.1 mL
Final pressure (P2) =?
The final pressure of the gas cylinder can be obtained by using the Boyle's law equation as shown below:
P1V1 = P2V2
1.4 × 6.2 = P2 × 3.1
8.68 = P2 × 3.1
Divide both side by 3.1
P2 = 8.68/3.1
P2 = 2.8 atm
Therefore, the final pressure of the gas cylinder is 2.8 atm
Answer:
2.8 atm
Explanation:
In which environment would a forensic scientist not be found?
In laboratories, analyzing evidence samples
In the field, collecting evidence from crime scenes
At colleges and universities, teaching new scientific techniques
In a police interrogation room, questioning the suspect
The correct answer is D. In a police interrogation room, questioning the suspect.
Explanation:
Forensic scientists are experts who use science as part of criminal investigations. Indeed, the main role of these experts is to deal with the evidence related to the crime to help authorities understand how the crime occurred and who was involved in this.
Because of this, the forensic scientist's role includes collecting evidence, analyzing samples, participating as witnesses in trials, and in some cases teach other experts about techniques. However, forensic scientists cannot interrogate suspects as they only deal with evidence and this process is in charge of the police.
An object has a mass of 10 grams and a volume of 5 cm3. What is the density of the object
Answer:
.0002
Explanation:
d=m/v
=10g/5cm3
=2g/come
=.0002 kg/cm3
Why is Jupiter so much larger than earth ? Check all that apply .
Answer: Its so much larger because it has a core.
Explanation:
Jupiter is proven to have a core, the planet still could have formed that core through disk instability. Enough dust could have collected and cemented together in the dense gas to form a core many times larger than the size of the Earth
Answer:
Inner planets were created at higher velocities. Outer planets attracted helium, hydrogen, and other gasses and Gases escaped from inner planets and not from outer ones.
Explanation:
you are interested in confirming how much fluoride is in toothpaste. one tube of toothpaste lists its ingredients as glycerol, sorbitol, sodium laurel sulfate, calcium carbonate, 0.15% sodium fluoride and a trace of hydrogen peroxide.(c) What substances comprise the sample
Answer:
Sodium fluoride
Explanation:
Fluoride is a common chemical found in toothpastes. In this tube of toothpaste, let's examine the constituents of the ingredients involved
glycerol, C₃H₈O₃⇒ carbon, hydrogen and oxygen
sorbitol, C₆H₁₄O₆⇒ carbon, hydrogen and oxygen
sodium laurel sulfate, CH₃(CH₂)₁₀CH₂(OCH₂CH₂)ₙOSO₃Na ⇒ carbon, hydrogen, oxygen, sulfur, sodium
sodium fluoride, NaF ⇒ sodium and fluorine/fluoride
hydrogen peroxide, H₂O₂ ⇒ hydrogen and oxygen
From the above, the substance/ingredient that comprises the chemical (fluoride) is sodium fluoride
Which term, speed or velocity, gives you more information about an object's motion? Why?
Answer:
Velocity
Explanation:
Both speed and velocity give speed information but only velocity gives information about the direction. So Velocity is more information. :)
What is the atomic mass of element X if 10.69 g XCl3 contains 5.55 g X?
Answer:
Atomic mass of element X = 115 g/mol (Approx)
Explanation:
Given:
Amount of XCl3 = 10.69 gram
Amount of X = 5.55 gram
Find:
Atomic mass of element X
Computation:
Moles of Cl = [Mass of Cl / Molar mass of Cl )
Moles of Cl = [(10.69 - 5.55 ) / 35.5]
Moles of Cl = 0.14479 (Approx)
Moles of X = 0.14479 / 3
Moles of X = 0.04826
Atomic mass of element X = 5.55 / 0.04826
Atomic mass of element X = 115 g/mol (Approx)
Aluminum has a density of 2.70 g/cm3 . What would the volume be in in3 of a piece of aluminum that weighs 185.3 g?
Answer:
The volume in in³ is 4.19 in³
Explanation:
To determine the volume in in³ ( cubic inches),
First, we will find the volume in cm³
From the question,
The density of aluminum = 2.70 g/cm³
Mass of the aluminum = 185.3 g
From,
[tex]Density = \frac{Mass}{Volume}[/tex]
Then,
[tex]Volume = \frac{Mass}{Density}[/tex]
Hence,
The volume of the aluminum in cm³ is
[tex]Volume = \frac{185.3 g}{2.70g/cm^{3} }[/tex]
[tex]Volume = 68.63[/tex] cm³
This is the volume in cm³
Now, for the volume in in³
1 in = 2.54 cm
∴ 1 in³ = 16.3871 cm³
Now,
If 16.3871 cm³ = 1 in³
Then, 68.63 cm³ = [tex]x[/tex]
[tex]x =\frac{68.63 \times 1 }{16.3871}[/tex]
[tex]x =4.19[/tex] in³
Hence, the volume in in³ is 4.19 in³
Answer:
4.19 g/cm3
Explanation:
Why do scientists use the scientific method?
A. It helps them analyze their data.
B. It helps them come up with testable scientific question.
C. It helps them prove their hypotheses.
D. It helps them avoid mistakes and produce reliable information.
Answer: D; It helps them avoid mistakes and produce reliable information
Explanation:
It says correct on my APEX test
Imagine you are going to eat your lunch soon. How did that stuff you eat originally get transformed into food by the plants or animals in the first place?
