Which of the follwoing molecules will form hydrogen bonds? (ch3)3n (ch3)2nh fch2ch2f ch3och3

Using the periodic table, The Bohr - Rutherford diagram of each of the elements is before bonding and after bonding is attached below.NH[tex]_{3}[/tex] ( ammonia ) is a covalent  bond.

Ammonia is a covalent compound because in the formation of ammonia the bond between nitrogen and three hydrogen is formed by the sharing of electron.

Covalent bond is formed by sharing of electron between atoms. Ionic bond is formed when one atom loses electron and other atom gain the electron or by the transfer of electron from one atom to another.

Hence,In the case of ammonia a covalent bond is formed and the electronegativity difference between nitrogen and hydrogen is not big enough to make a covalent bond.

To learn more about Bohr-Rutherford diagrams here

https://brainly.com/question/14586294

#SPJ1

The difference between the sum of the measures of the interior angles in an octagon and the sum of the measures of the interior angles in a hexagon is 360°.

Interior angle refers to the angle inside a polygon that is formed by two of its adjacent sides. The sum of the measures of the interior angles of a polygon is given by the equation:

180°(n - 2)

where n is the number of sides

An octagon is a polygon that has 8 vertices and 8 sides. The sum of the measures of the interior angles of an octagon is:

180°(8 - 2) = 180°(6) = 1080°

On the other hand, a hexagon is a polygon that has 6 vertices and 6 sides. The sum of the measures of the interior angles of an octagon is:

180°(6 - 2) = 180°(4) = 720°

Subtracting the sum of the interior angles of the two polygons,

1080° - 720° = 360°

Learn more about interior angles here: https://brainly.com/question/7888180

#SPJ4

The percent of heat radiation reflected by the different types of surfaces that Earth has (i.e snow, rock, forest, etc.) can be quantified or measured as Albedo.

Albedo is the percentage of sunlight that is reflected off of a surface. The higher the albedo, the more reflective the surface is. Different surfaces have different albedos. For example, fresh snow has a high albedo, while a forest has a low albedo.

The albedo of a surface can have a big impact on the climate. If a surface has a high albedo, it will reflect more heat and stay cooler. If a surface has a low albedo, it will absorb more heat and become warmer.

You can measure the albedo of a surface with a simple device called an albedometer. By measuring the amount of sunlight that is reflected off of a surface, you can calculate the albedo.

Surfaces with a high albedo are important in helping to regulate the Earth’s climate. They help keep the Earth cool by reflecting back sunlight.

Learn more on albedo here:

https://brainly.com/question/1335260

#SPJ4

Since silicone breast implants need a security and the implanter is required to guarantee and replace the implant fixture by the business or manufacturer in accordance with their rules, silicone breast implants are protected by UCC Article 2 warranties.

As per the mandate, drugs, medications, stents, implants and other consumables and incidentals given to patients during a medical procedure or treatment cannot be considered to be the sale of commodities and are therefore subject to taxation under state laws.

Hence, breast implants are covered under UCC Article 2 warranties and silicone gel implantation does not constitute sale of goods via the surgeon.

To read more about uniform commercial code (ucc) visit:

https://brainly.com/question/15980446

#SPJ4

Partial pressure = total pressure * volume of gas.

Partial pressure of oxygen (po2) = 1*0.5 = 0.5 atm L

what is partial pressure?

According to Dalton's Law of Partial Pressure, the total pressure of a gas mixture is equal to the sum of the partial pressures of all the constituent gases that make up the mixture. Dalton's Law of Partial Pressure has a straightforward equation.

It claims that the overall pressure exerted by the combination of non-reactive gases is equal to the sum of the partial pressures of the various gases. The pressure applied by each individual gas in a gas mixture is referred to as partial pressure.

Partial pressure = total pressure * volume of gas.

Thus, given here,

volume = 0.5 l

Pressure = 1 atm at STP

Therefore, partial pressure of oxygen = 1*0.5 = 0.5 atm L

To learn more about partial pressure from the given link below,

https://brainly.com/question/28116497

#SPJ4

The partial pressure of helium (He) in the mixture containing 1 g of H₂ and 1 g of He is 0.16 atm

Partial pressure can be explained if each specific gas contributes a part of the total pressure and that part is the partial pressure of that gas.

At first to find Mole For H₂:

Mass of H₂ = 1 g

Molar mass of H₂ = 2 × 1 = 2 g/mol

Mole of H₂ =?

Mole = mass / molar mass

Mole of H₂ = 1/2

Mole of H₂ = 0.5 mole

To find the mole For He:

Mass of He = 1 g

Molar mass of He = 4 g/mol

Mole of He =?

As we know, Mole = mass / molar mass

Mole of He = 1/4

Mole of He = 0.25 mole

Total Mole = Mole of Hydrogen+ Helium

Total mole = 0.5 + 0.25

Total mole = 0.75 mole

Next, we shall determine the mole fraction of He.

Mole fraction = mole / total mole

Mole of He = 0.25 mole

Total mole = 0.75 mole

Mole fraction of He = 0.25 / 0.75

Mole fraction of He = 0.33

To determine the partial pressure of He.

Partial pressure = mole fraction × total pressure

Mole fraction of He = 0.33

Total pressure = 0.48 atm

Partial pressure of He = 0.33 × 0.48

Partial pressure of He = 0.16 atm

Therefore, the partial pressure of helium (He) in the mixture is 0.16 atm

Learn more about Partial pressure,

brainly.com/question/15712083

#SPJ4

The mass of the latter needed will be, 2.47 kg

Using the ideal gas equation:

where,

P = pressure of the gas

V = volume of gas

T = temperature of the gas

R = gas constant = 0.0821 L.atm/mole.K

w = mass of gas

M = molar mass of gas

The expression for two gases at the same temperature, and volume of gas will be:

where,

= pressure of O₂ gas = 8.20 atm

= pressure of He gas = 5.40 atm

= molar mass of O₂ gas = 32 g/mol

= molar mass of He gas = 4 g/mol

= mass of O₂ gas = 30.0 kg

= mass of He gas =?

Now put all the given values in the ideal gas equation, and we get:

(8.20 atm * 32 g/mol )/( 5.40 atm * 4 g/mol)

=2.47

Therefore, the mass of the latter needed will be, 2.47 kg

For more information on gauge pressure click on the link below:

https://brainly.com/question/6984092

#SPJ4

When compounding a sterile product, you should keep all supplies and manipulations at least  6 inches within the hood from all walls (including the filter) and the front edge of the hood.

What does a sterile compounding room mean?

A well-lit buffer space, an ante area, a storage area for sterile supplies and products, and both are secondary engineering controls are all included in the sterile compounding area. An space where a PEC is situated and where operations like preparation, compounding, and staging of CSPs take place is referred to as a buffer area (or "cleanroom").

When preparing a sterile product, you must keep all materials and operations at least 6 inches away from the hood's front edge, all walls (including the filter), and all manipulations.

To learn more about sterile compounding room from the given link below,

https://brainly.com/question/22978608

#SPJ4

The pH of a mixture of 0.25 m acetic acid (CH3COOH) and 0.1 m sodium acetate (CH3COO- Na ) in a total volume of 1 l is 4.37.

The above situation represents a case of buffer solution.

Buffer solutions are those solutions that can resist change in their pH if any acid or base is added to them.

To calculate the pH of a buffer solution, the Henderson-Hasselbalch equation is used

pH = pKa + log [Salt]/[Acid]

Putting

pKa = 4.76

[Salt] = Concentration of sodium acetate = 0.1 M

[Acid] = Concentration of acetic acid = 0.25 M

pH = 4.76 + log [0.1]/[0.25]

pH = 4.76 + log[0.4]

pH = 4.76 - 0.39

pH = 4.37

Hence, the pH of a mixture of 0.25 m acetic acid (ch3cooh) and 0.1 m sodium acetate (ch3coo- na ) in a total volume of 1 l is 4.37.

To know more about "buffer solution", refer to the link given below:

https://brainly.com/question/24262133?referrer=searchResults

#SPJ4

The fractional conversion in an ester interchange reaction is 0.99999

The average degree of polymerization (pn or dp) of the polyester produced = 0.99999/1 *100 = 99.999

What is degree of polymerization?

The quantity of monomer units in the polymer is known as the degree of polymerization (DP or Xn). It is determined as the molecular weight of the repeat unit divided by the molecular weight of the polymer. The two primary methods for measuring DP are number average DP and weight average DP.

This quantity of repeating units varies based on the type of polymer and its molecular weight and aids in determining the physical and chemical properties of a polymer. The degree of polymerization (DP), or the number of repeating units, is therefore calculated and is crucial in the polymer business.

The overall average degree of polymerization (pn or dp) of the polyester produced = 0.99999/1 *100 = 99.999

To learn more about degree of polymerization from the given link below,

https://brainly.com/question/15517980

#SPJ4

IUPAC name of vinylcyclohexane is vinylcyclohexane, ethynylcyclohexane  is 1-ethynylcyclohexane, allylcyclohexane  is prop-2-enylcyclohexane and of acetylcyclohexane is 1-Cyclohexylethan-1-one.

IUPAC stands for International Union of Pure and Applied Chemistry. It is the universally-recognized authority on chemical nomenclature. It is based on naming the molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring.

It creates a standardized way to name chemical compounds. The use of Common names can lead to confusion and misinformation.

IUPAC name of vinylcyclohexane is 1-ethenylcyclohexane.

IUPAC name of ethynylcyclohexane  is 1-ethynylcyclohexane.

IUPAC name of  allylcyclohexane is prop-2-enylcyclohexane.

IUPAC name of acetylcyclohexane is 1-Cyclohexylethan-1-one.

To know more about IUPAC Naming refer to the link:

https://brainly.com/question/27888104

#SPJ4

Answer:

23g/mole

Explanation:

And whereas one sodium atom has an approximate mass of 23 u, 1 mol of Na atoms has an approximate mass of 23 grams. One mole of a substance has the same mass in grams that one atom or molecule has in atomic mass units.

The heat of reaction is obtained as 190 kJ/mol .

The term heat of reaction is used to show the energy that is absorbed or emitted in a reaction. Recall that a reaction is exothermic when heat is given out and the reaction is endothermic when heat is absorbed.

In this case;

H- H bond energy = 436 kJ/mol

Cl - Cl bond energy = 242 kJ/mol

H - Cl bond energy = 432 kJ/mol

Then we know that;

ΔH reaction = ∑H products - ∑H reactants

We now have;

ΔH reaction = 2(432 kJ/mol) - [242 kJ/mol + 432 kJ/mol]

ΔH reaction =  864  kJ/mol - 674 kJ/mol

ΔH reaction = 190 kJ/mol

Learn more about heat of reaction:https://brainly.com/question/16648056

#SPJ1

Biochemical sequences that are similar to one another are found via BLAST. The application calculates the statistical significance by comparing nucleotide or protein sequences to sequence databases.

Advantages

1) Creating phylogeny

2) DNA analysis

Disadvantages

1) You require repeatable, unbiased outcomes.

2) Finding small sequences can be challenging

In addition to assisting in the identification of gene family members, BLAST can be used to infer functional and evolutionary links between sequences.

Learn more about Nucleotide sequences here

https://brainly.com/question/1569358

#SPJ4

The balanced chemical equation for the reaction that occurs when strong acid H₃O⁺ is added to the buffer:

C₅H₅N + H₃O⁺ → C₅H₅NH⁺ + H₂O

A buffer can be defined as a substance that prevents the pH of a solution from changing by either releasing or absorbing H⁺ in a solution.

Buffer is a solution that can resist pH change upon the addition of an acidic or basic components and it is able to neutralize small amounts of added acid or base, pH of the solution is relatively stable.

This buffer is example of weak acid (C₅H₅NH⁺) and its conjugate base (C₅H₅N).

C₅H₅NH⁺ gain protons from strong acid H₃O⁺.

More about buffer: brainly.com/question/4177791

#SPJ4

The Heisenberg uncertainty principle is true at the atomic level because  we cannot simultaneously determine the accuracy of both velocity and the position of a particle.

Heisenberg's Uncertainty Principle states that there is inherent uncertainty in the act of measuring a variable of a particle.

The Heisenberg uncertainty principle was found to be contrary to classical Newtonian physics which stipulates that all variables of particles to be measurable to an arbitrary uncertainty given standard equipment.

The Heisenberg uncertainty principle is true at the atomic level because  we cannot simultaneously determine the accuracy of both velocity and the position of a particle.

Learn more about Heisenberg uncertainty principle :

https://brainly.com/question/11488878

#SPJ1

All of the above apply.

Egyptians worked together to build the pyramids.

Quarries and ancient tools suggest that large slabs were created from rock beds.

The slabs were placed on sleds and pulled to the building site.

Oil was poured on the roadway to make the process easier.

This process is depicted in tomb paintings that date back to 1900 BCE.

To learn more about pyramids visit:

https://brainly.com/question/13057463

#SPJ9

If the volume is reduced, it then follows that; more N2,H2,NH3 would be produced until a new equilibrium position was reached.

We know that a dynamic equilibrium occurs when the rate of forward reaction is equal to the rate of  reverse reaction. In that case, the reactants disappear at the same rate as the products appear.

Now, we have the reaction; N₂(g) + 3H₂(g) → 2NH₃(g) In which case, the volumes to the left hand side of the reaction equation is smaller than the volume to the right hand side of the reaction equation.

If the volume is reduced, it then follows that; more N2,H2,NH3 would be produced until a new equilibrium position was reached.

Learn more about dynamic equilibrium:https://brainly.com/question/2363073

#SPJ1

The major intermolecular force that governs how soluble ethyl 4-benzoate's amine hydrochloride salt is in water is ion-dipole. In conclusion, (b) is the correct response.

Since water is polar and the amino hydrochloride salt of ethyl amino benzoate will be ionic, ion-dipole will be the predominant intermolecular force.

The electromagnetic forces between molecules of attraction or repulsion that operate between atoms and other types of nearby particles, such as atoms or ions, are examples of intermolecular forces (IMFs), also known as secondary forces.

The strongest intermolecular forces are ion-dipole forces. A powerful dipole-dipole interaction of a hydrogen atom and an extremely electronegative atom, like oxygen, nitrogen or fluorine is known as a hydrogen bond.

The complete question is:

What is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water?

a) ion-ion

b) ion-dipole

c) London dispersion

d) hydrogen bonding

Learn more about Intermolecular forces here:

https://brainly.com/question/13588164

#SPJ4

The new  volume of the gas  is 30 L.

P1=12 atm;V1=23 L

;T=200 K

P2=14 atm

;V2=?;mllT2=300 K

The difference between two initial known values of either temperature (T2) or volume (V2) is included in the computations of Charles' Law: According to Boyle's Law, the volume of a given volume of gas sustained at a certain temperature decreases inversely with the applied pressure while the temperature and mass are both constant.

Boyle's Law states that a gas's pressure and volume are both constant at a certain temperature. Increased pressure causes a reduction in volume while the temperature stays constant.

Charles' law ensures that the gas's pressure, volume, and temperature remain constant. Boyle's law, in contrast, guarantees that the gas's temperature and pressure will remain constant.

Learn more about  Boyle's Law refer

https://brainly.com/question/26040104

#SPJ4

Answer:

Reactants are starting materials and are written on the left-hand side of the equation. Products are the end result of the reaction and are written on the right-hand side of the equation.

The layer of ethyl alcohol forms on the surface if some ethyl alcohol is poured into the container after the ice cube has melted.

The density of a substance is its mass per unit volume.

The SI derived unit for density is the kilogram/cubic meter, but chemist usually use gram per cubic centimeter.

Ethyl alcohol has lower density of water, so it would form on the surface.

The density of the water is an around 1000 kg/m³.

Mass is a fundamental measure of the amount of matter in the object.

Volume is the amount of space that a substance occupies.

More about density: brainly.com/question/1354972

#SPJ4

The byproduct of fermentation that creates the characteristic holes in swiss cheese is a. carbon dioxide.

Swiss cheese is a cheese made in Switzerland.

Swiss cheese is, usually, a semihard cheese made from cows milk with a characteristic holes.

Fermentation of milk is a metabolic process in which lactic acid and carbon dioxide are produced from sugar lactose:

C₆H₁₂O₆ → CH₃CHOHCOOH + C₂H₅OH + CO₂

Carbon dioxide (CO₂) is a gas. It gets stuck in swiss cheese and it makes bubbles, which make holes.

Fermentation is a way of extracting energy from molecules and it is the oldest metabolic pathway.

More about fermentation: brainly.com/question/11554005

#SPJ4

Phosphoric acid (H3PO4) has three dissociable protons, with the pKa's.

With the chemical formula H3PO4, phosphoric acid, also known as orthophosphoric acid, monophosphoric acid, or phosphoric(V) acid, is an inorganic solid that contains phosphorus. Colorless and odorless, phosphoric acid is a substance. In its most common form, an 85% aqueous solution, it appears as a syrupy liquid that is colorless, odorless, and non-volatile. Considering that many fertilizers include it, it is a significant industrial chemical.

Acid makes up the substance. The phosphate ion PO results from the removal of all three H+ ions. H2PO, or hydrogen phosphate, is produced when one or two protons are removed, correspondingly. Organophosphate esters are produced by phosphoric acid.

To learn more about Phosphoric acid from the given links:

https://brainly.com/question/27983519

#SPJ4

Option D) is the correct option. The role of the catalyst is to provide a new pathway for the reaction to take place which has lower activation energy.

The function of the catalyst is to change the rate of reaction without interfering with the reaction itself or without getting consumed in the reaction itself.

Catalyst only affects the activation energy of the reaction and does not change the enthalpy difference of the reaction. In other words, the final and initial energy of the product and reactant respectively remains the same even in presence of the catalyst.

In options C) and B) the final and initial energy of the reaction is different for both pathways, hence these are incorrect.

In option A) the activation energy of the uncatalyzed reaction is less than the catalyzed one which is not possible.

Therefore Option D) is the correct reaction pathway showing the effect of catalyst on an uncatalyzed reaction.

LEARN MORE ABOUT CATALYSTS HERE: https://brainly.com/question/847624

#SPJ4

Your question was incomplete. Please check below the full content

The relative velocity of Car A with respect to Car B, ​Vab = 16m/s.

Given,

Va = 10m/s

Vb = 6m/s

Vab = ?

So,

To find Vab of the car A and car B

We know the car A velocity and as both the car the in same direction so to to know average speed or velocity car B velocity taken in negative.

So,

We can put formula,

Vab = Va - (-Vb)

Vab = 10m/s - (-6m/s)

Vab = 16m/s

The velocity of an object when compared to another observer is known as its relative velocity. It is the rate at which one object's relative position changes in relation to another object over time.

To know more about velocity :

https://brainly.com/question/19260269

#SPJ9