Which reservoir is found underground in the cracks and spaces in the soil, sand, and rock?

Glaciers
Ground water
Polar ice caps
Rivers

You can put it in a very strong magnetic field.

Answer:

False, they can interact without touching

Answer:

Centripetal acceleration is related to tangential velocity through ac = v ^ 2 / R

The angular velocity is related to the tangential velocity through ω = v / R

a) ac = (20 m / s) ^ 2/20 m = 20 m / s ^ 2

b) ω = 20 m / s / 20m = 1 rad / s

c) The swept angle is Ф = ω.t = 1 rad / s. 3600 s = 3600 rad

Expressed in turns it is Ф = 3600 rad. 1 turn / (2.π rad) = 573 turn

Explanation:

Answer: D (The abundance percentage of each isotope)

Explanation: hope this helps!

Answer:

The lower case letter represents the recessive allele.

Explanation:

I just learned abt this today so im confident that this is correct

Answer:

- Magnesium chloride: MgCl₂.

- Alumina: Al₂O₃.

- Chlorine (VII) oxide: Cl₂O₇.

- Sodium sulfide: Na₂S.

- Calcium oxide: CaO.

Explanation:

Hello!

In this case, according to the naming rules for the given compounds, which state that binary salts have a metal and a nonmetal and oxides contain oxygen, we have:

- Magnesium chloride: MgCl₂.

- Alumina: Al₂O₃.

- Chlorine (VII) oxide: Cl₂O₇.

- Sodium sulfide: Na₂S.

- Calcium oxide: CaO.

Best regards!

Answer:

Its Br on Ap ex

Explanation:

Just got it wrong ;( it's B

Answer:

QhhjjgDjKfxockzgnx

Explanation:

DjiDfj,jzo

Answer:

182.70K

Explanation:

Using the general gas equation as follows:

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = 0.0821 Latm/Kmol

T = temperature (K)

Based on the provided information, P = 5 atm, V = 12L, n = 4 moles, T =?

PV = nRT

5 × 12 = 4 × 0.0821 × T

60 = 0.3284T

T = 60/0.3284

T = 182.70K

Answer:

The particles of an ideal gas have no volume and no attractions for each other.  In a real gas, however, the molecules do have a measurable volume. The molecules of real cases have intermolecular attractions for each other.

An ideal gas behaves like a real gas under the conditions of low temperature and high pressure.

This is because at low temperature and high pressure molecules of gas will have negligible kinetic energy and strong force of attraction.

Thus ethene gas does not behave like an ideal gas at low temperatures and high pressures.

The particles of an ideal gas have no volume and no attraction for each other.  In a real gas, however, the molecules have a measurable volume. The molecules of real gases have intermolecular attractions for each other. An ideal gas behaves like a real gas under conditions of low temperature and high pressure. This is because at low temperatures and high-pressure molecules of gas will have negligible kinetic energy and a strong force of attraction. Thus, ethene gas does not behave like an ideal gas at low temperatures and high pressures.

Answer:

2.18 × 10⁷ Au atoms

Explanation:

Step 1: Calculate the diameter of a gold atom

The diameter is twice the radius.

d = 2 × r = 2 × 144 pm = 228 pm

Step 2: Convert "d" to meters

We will use the conversion factor 1 m = 10¹² pm.

228 pm × 1 m/10¹² pm = 2.28 × 10⁻¹⁰ m

Step 3: Convert the total distance to be covered (D) to meters

We will use the conversion factor 1 m = 10³ mm.

4.97 mm × 1 m/10³ mm = 4.97 mm × 10⁻³ m

Step 4: Calculate the number of atoms of gold required

We will divide the total distance by the diameter of 1 atom of gold.

D/d = 4.97 mm × 10⁻³ m/2.28 × 10⁻¹⁰ m = 2.18 × 10⁷

Answer:obtain and use resources, grow, reproduce, and maintain stable internal conditions while living in a constantly changing external environment.

Explanation:

All successful organisms must be able to do the three things including obtain energy, produce offspring, maintain their structure. The correct option is B.

In biology, an organism is any natural, living system that functions as a separate entity. Cells make up all organisms.

Taxonomy divides organisms into groups such as multicellular animals, plants, and fungi, or unicellular microorganisms such as protists, bacteria, and archaea.

The current classification system is based on the Linnean system and has eight levels of taxa: domain, kingdom, phylum, class, order, family, genus, and species.

All successful organisms must be able to do three things: obtain energy, generate progeny, and maintain their respective structure.

Thus, the correct option is B.

For more details regarding organism, visit:

https://brainly.com/question/12825206

#SPJ2

Dry ice are the molecule which represent molecular solid. Hence option c is correct.

Molecules are defined as  the lowest identifiable unit into which a pure material can be divided while maintaining its chemical makeup and attributes is made up of two or more atoms. When two or more atoms come together and form bonds with one another, a molecule is created. Each atom shares an electron when a bond is formed between them. A molecule is created as a result of a covalent bond.

Molecular solid are defined as composed of atoms or molecules joined by hydrogen bonds, London dispersion forces, and dipole-dipole forces. Solids made of molecules and held together by van der Waals forces are referred to as molecular solids. Examples include carbon dioxide, hydrogen, etc. Crystalline solids include ZnS. The ionic solid MgO is. Diamond is organized in a network.

Thus, dry ice are the molecule which represent molecular solid. Hence option c is correct.

To learn more about molecule, refer to the link below:

https://brainly.com/question/19922822

#SPJ6

Your question is incomplete,  but probably your complete question was

Which of the following is an example of molecular solid?

a. Zinc sulphide

b. Magnesium oxide

c. Dry ice

d. Diamond

Answer:

7.13 L of ethanol, CH₃CH₂OH

Explanation:

We'll begin by calculating the number of mole in 2.24 g of ethanol. This can be obtained as follow:

Mass of CH₃CH₂OH = 2.24 g

Molar mass of CH₃CH₂OH = 12 + (3×1) + 12 + (2×1) + 16 + 1

= 12 + 3 + 12 + 2 + 16 + 1

= 46 g/mol

Mole of CH₃CH₂OH =?

Mole = mass / molar mass

Mole of CH₃CH₂OH = 2.24 / 46

Mole of CH₃CH₂OH = 0.049 mole

Next, we shall convert 40 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

T(°C) = 40 °C

T(K) = 40 °C + 273

T(K) = 313 K

Finally, we shall determine the volume of ethanol, CH₃CH₂OH in present in the container. This can be obtained as follow:

Pressure (P) = 17.88 KPa

Temperature (T) = 313 K

Number of mole (n) = 0.049 mole

Gas constant (R) = 8.314 L.KPa/Kmol

Volume (V) =?

PV = nRT

17.88 × V = 0.049 × 8.314 × 313

Divide both side by 17.88

V = (0.049 × 8.314 × 313) / 17.88

V = 7.13 L

Thus, 7.13 L of ethanol, CH₃CH₂OH will be present in the container.

Based on the mass of ethanol provided, the mass of liquid ethanol is 1.61 g

The relationship between the gas volume, pressure, temperature and moles is given by the ideal gas equation:

where:

From data provided:

P =  17.88 kPa

V = 3.00 L

T = 40.0 °C = 313 K

R = 0.049 mole

n = ?

n = PV/RT

n =  17.88 * 2/8.314  * 313

n = 0.0137 moles

Mass of ethanol gas = number of moles * molar mass

Mass of gaseous ethanol = 0.0137 mole * 46 g/mol

Mass of gaseous ethanol = 0.63 g

Then:

Mass of liquid ethanol, CH₃CH₂OH = 2.24 - 0.63

Mass of liquid ethanol, CH₃CH₂OH = 1.61 g

Therefore, the mass of liquid ethanol is 1.61 g

Learn more about vapor pressure and mass at:

Answer: C) middle 50 percent of the data

The interquartile range (IQR) spans from the first quartile Q1 to the third quartile Q3.

25% of the data is below Q1 and 75% of the data is below Q3. The gap between the two endpoints consists of 75-25 = 50 percent of the data, or half of the data.

The middle 50 percent of the data. Therefore, option (C) is correct.

The interquartile range (IQR) shows the spread or dispersion of a dataset. It is calculated as the difference between the third quartile (Q3) and the first quartile (Q1) in a sorted dataset. The first quartile (Q1) is the value below which 25 percent of the data falls, and the third quartile (Q3) is the value below which 75 percent of the data falls.

The interquartile range captures the range of the central 50 percent of the data. It provides a measure of the variability or spread of the middle portion of the dataset while excluding the influence of extreme values or outliers.

Learn more about interquartile range, here:

https://brainly.com/question/29173399

#SPJ6

Answer:

uhhh i don't know the experiment

put link and i might be able to help you

Explanation:

Answer:

12.99

Explanation:

A chemist dissolves 716. mg of pure potassium hydroxide in enough water to make up 130. mL of solution. Calculate the pH of the solution. (The temperature of the solution is 25 °C.) Be sure your answer has the correct number of significant digits.

Step 1: Given data

Step 2: Calculate the moles corresponding to 0.716 g of KOH

The molar mass of KOH is 56.11 g/mol.

0.716 g × 1 mol/56.11 g = 0.0128 mol

Step 3: Calculate the molar concentration of KOH

[KOH] = 0.0128 mol/0.130 L = 0.0985 M

Step 4: Write the ionization reaction of KOH

KOH(aq) ⇒ K⁺(aq) + OH⁻(aq)

The molar ratio of KOH to OH⁻is 1:1. Then, [OH⁻] = 0.0985 M

Step 5: Calculate the pOH

We will use the following expression.

pOH = -log [OH⁻] = -log 0.0985 = 1.01

Step 6: Calculate the pH

We will use the following expression.

pH + pOH = 14

pH = 14 - pOH = 14 -1.01 = 12.99

covalent bonds

The equal sharing of electrons in a covalent bond is called a nonpolar covalent bond.

Answer:

hi

Explanation:

i think 63.55 g

hope it helps have a nice day

good bye: )

Answer:

Explanation:

A mole of Cu (Copper) is equal to 63.55g

Answer:

1) d = 2.4 g/cm³

2) m = 25 g

3) v = 126.7 cm³

Explanation:

Given data:

Mass of material = 24 g

Volume of material = 10 cm³

Density of material = ?

Solution:

Formula:

d = m/v

by putting value,

d = 24 g / 10 cm³

d = 2.4 g/cm³

2) Given data:

Density of material = 5 g/cm³

Volume of material = 5 cm³

Mass of material = ?

Solution:

Formula:

d = m/v

5 g/cm³ = m / 5 cm³

m = 5 g/cm³×5 cm³

m = 25 g

3)Given data:

Density of material = 3 g/cm³

Mass of material = 380 g

Volume of material =  ?

Solution:

Formula:

d = m/v

3 g/cm³ = 380 g / v

v = 380 g /3 g/cm³

v = 126.7 cm³

Answer:

As the oceans absorb more heat, sea surface temperature increases and the ocean circulation patterns that transport warm and cold water around the globe change

Explanation:

Answer:

Density = 11.4 g/cm³

Explanation:

Given data:

Density of lead = ?

Height of lead bar = 0.500 cm

Width of lead bar = 1.55 cm

Length of lead bar = 25.00 cm

Mass of lead bar = 220.9 g

Solution:

Density = mass/ volume

Volume of bar = length × width × height

Volume of bar = 25.00 cm × 1.55 cm × 0.500 cm

Volume of bar = 19.4 cm³

Density of bar:

Density = 220.9 g/ 19.4 cm³

Density = 11.4 g/cm³

Answer:

0.0646 mole.

Explanation:

The following data were obtained from the question:

Number of molecules = 3.89×10²² molecules

Number of mole =?

The number of mole present in 3.89×10²² molecules of CCl₄ can be obtained as follow:

From Avogadro's hypothesis:

6.02×10²³ molecules = 1 mole

Therefore,

3.89×10²² molecules = 3.89×10²² molecules × 1 mole / 6.02×10²³ molecules

3.89×10²² molecules = 0.0646 mole

Thus, 0.0646 mole is present in 3.89×10²² molecules of CCl₄.

Answer:

1. get vitamin c

2. get your bone mineral density tested

3. don't smoke or drink excessively

4. start weight-bearing exercise

Explanation:

helps improve skeletal system

A scientist observes several different fossils in a

rock layer. Based on this observation, which is

the best conclusion?

A. The fossils are composed of lava that cooled

A. The fossils are composed of lava that cooledaround several organisms.

B. The fossils formed about the same time as the rock layer in which they were found.

That's the right answer but you can choose one.

Answer:

B. They oxidize hydrocarbons to form less toxic gases.

Explanation:

A catalytic converter can be defined as an anti-pollution device containing a catalyst like platinum-iridium, installed in the exhaust chamber of an automobile so as to chemically convert harmful (poisonous) pollutants such as unburned hydrocarbons and carbon monoxide (CO), sulfur dioxide (S02), nitrogen oxide (NO) etc., into less harmful, poisonous or toxic chemical compounds.

This ultimately implies that, catalytic converters are typically used for converting harmful gases into less harmful, poisonous or toxic gases and molecules e.g carbon dioxide (C02) and water (H2O). This helps to prevent global warming, enhance the conservation of natural resources, as well as preserve the lives of living organisms and their natural habitat.

Hence, the statement which best describes the use of catalytic converters in automobiles is that they oxidize hydrocarbons to form less toxic gases.