You have a games console in your bedroom and a video streaming device in your lounge. You use both devices to watch movies. The Wireless Access Point is located in the lounge. You have found that you are able to stream movies at a far higher quality in the lounge than in your bedroom. Why is this?

Answer:Select the range of cells, the table, or the whole sheet that you want to apply conditional formatting to. On the Home tab, under Format, click Conditional Formatting. Point to Data Bars, and then click a gradient fill or a solid fill.

Explanation:

a program in c to count a total number of duplicate elements in an array.

Elements are the building blocks of all matter. They are substances that cannot be broken down into any other substances by chemical means. Elements are identified by their atomic number, which is the number of protons in the nucleus of an atom. There are 118 elements known to man, with the most common being oxygen, hydrogen, carbon, nitrogen, and calcium. All elements have unique physical and chemical properties that allow them to combine and interact with other elements in different ways.

To learn more about elements

https://brainly.com/question/26624021

#SPJ1

When there is no option to keep temporary internet files (cookies) while browsing the internet, the user's browsing experience might suffer in numerous ways.

Login credentials: Because cookies are frequently used to save login credentials for websites, users may need to manually input their login information each time they visit a page if cookies are not kept. Cookies can also be used to remember users' specific settings, such as language preferences or display options. Users may need to modify these settings every time they visit a website if cookies are not used. Shopping cart items: Cookies can assist e-commerce internet websites remember things that users have placed to their shopping cart. Users may need to manually add products to their shopping cart if cookies are not present.

learn more about internet   here:

https://brainly.com/question/13308791

#SPJ4

An equivalent function to f which only uses NAND and not gates. how many NMOS transistors would be needed to implement this function is F = AB +C.

A transistor is a specific type of semiconductor device that regulates or controls electrical signals like current or voltage. The word "transistor" is a contraction of the word "transfer resistance." William Shockley, Walter Brattain, and John Bardeen, three American physicists, develop it on December 23, 1947. To move a weak signal from a circuit with low resistance to one with high resistance, a switching device or small device is typically used. Essentially, it is a semiconductor-based component.

F = AB +C

F = [tex]\mathrm{\over AB +C}[/tex]

F = [tex]\mathrm{\over AB.C}[/tex]

To implement CMOS NAND, we need 4 transistors and to implement CMOS NOT gate we need 2 transistors.

From the expression, it is clear that we need two CMOS NAND gates and one CMOS NOT gate to implement it. So, total no. of transistor required in this case =

2×4+2 = 10

Learn more about transistor

https://brainly.com/question/30335329

#SPJ4

It may be anywhere in the range of 60 volts. Nevertheless, depending on the kind of projector you have, this component could alter. A projector's brightness level tells you how much electricity it consumes.

TVs emit light; projectors reflect it. Reflected light is more pleasant and less taxing. Larger pictures are produced using projectors. Larger graphics facilitate and lighten seeing.

This disparity is getting smaller as TVs get bigger every year, yet a projector delivers bigger displays for less money. Therefore, a projector is usually what you want unless you're streaming 4K content. Projectors make it easier to experience 4K resolution on a large screen.

To know more about projector visit:

https://brainly.com/question/14637513

#SPJ1

Randy is scanning TCP SYN. Ethical hackers frequently employ TCP SYN scanning to find hosts, open ports, and other security flaws.

A person who studies ethical hacking and employs its methods is known as an ethical hacker student. In order to protect computer systems, networks, and applications from hostile attacks, ethical hacking entails finding their weaknesses. While employing the same methods as malevolent hackers, ethical hackers do so with the organisation they are testing's consent and knowledge. A student who wants to become an ethical hacker needs to be knowledgeable about computer science, cybersecurity, and information technology. To find and exploit vulnerabilities and offer suggestions for correction, they must be able to use a variety of tools and techniques. To ensure that their work is done legally and ethically, ethical hacker students must also abide by strong ethical norms and legislation.

Learn more about Ethical hackers here:

https://brainly.com/question/14914116

#SPJ4

False. Accessing many formula-related features in Excel, such as auditing tools, calculation choices, and formula evaluation, is done via the Formulas tab.

Microsoft Excel offers a variety of tools and options for dealing with formulae, functions, and computations in spreadsheets under the Formulas tab. It has a number of groups, including Calculation, Defined Names, Formula Auditing, and Function Library. Users have access to more than 400 built-in functions through the Function Library group, which can process data in a variety of ways. Users have access to named range management and creation through the Defined Names group, which is helpful for formula simplification and comprehension. The Formula Auditing group offers resources for assessing formulas, tracking precedents and dependents, and spotting mistakes. Overall, Excel's Formulas tab is a crucial feature that facilitates users' management and effective use of intricate calculations and operations.

Learn more about Formulas tab here:

https://brainly.com/question/20452866

#SPJ4

It provides a way to manipulate the data, such as adding, editing, and deleting records. It also provides a way to search and sort the data, as well as run queries and reports.

What is Data?
Data is information that is collected, organized and analyzed to draw conclusions and inform decisions. Data can be qualitative or quantitative, and it can be collected from a variety of sources, including surveys, questionnaires, polls, experiments, and observational studies. Data can be used to identify trends, relationships and patterns between variables, and it can help to inform decisions in many areas, such as business, economics, and public policy. Data is often visualized to make it easier to interpret, and to help make underlying patterns more clear.

To know more about Data
https://brainly.com/question/30492002
#SPJ4

The code that assigns the greater of these two variables to another variable named max is: if (x > y) { int max = x;} else { int max = y;}

In a computer program, a variable is a named memory location used to temporarily store data while the program is running. One way to think of a variable is as a container that holds a value that can change as the program runs.

Before they can be used in a program, variables must be declared or defined, and each variable must have a unique name. The data type of the variable is what determines the kind of data it can hold. Integers, floating-point numbers, characters, and strings are all common data types. Variables are necessary for programming because they are used to store data in memory.

Learn more about variables:

brainly.com/question/29614058

#SPJ4

Working memory, cognitive flexibility, and inhibitory control  are executive functioning involves three components.

Option A is correct.

Working memory, flexible thinking, and self-control are examples of executive function mental skills. These abilities are put to use all the time in our education, work, and daily lives. Focusing, adhering to instructions, and managing emotions can all be hampered by executive function issues.

The higher-level cognitive skills you use to control and coordinate your other cognitive abilities and behaviors are referred to as "executive functions." The higher-level cognitive abilities you use to control and coordinate your other cognitive abilities and behaviors are referred to as executive functions.

Question incomplete:

executive functioning involves three components: . group of answer choices

A.  working memory, cognitive flexibility, and inhibitory control

B.  short-term memory, habituation, and theory of mind

C. perspective taking, concrete thinking, and cognitive flexibility

D. information processing, emotional reactivity, and social awareness

Learn more about executive :

brainly.com/question/29886955

#SPJ4

A composite key is a combination of two or more attributes that uniquely identifies a record in a table. Each attribute that makes up the composite key can be used individually to identify a record, but when they are used together they form a unique identifier.

What is Identifier?
An identifier is a name given to a variable, function, class, module, or other object in a program. It is used to refer to that object from elsewhere in the same program. Identifiers are often used to name variables that store values in memory, such as numbers, text, or more complex data structures. Identifiers must follow a specific syntax and naming conventions, depending on the programming language in use. This helps ensure that the code is easy to read and understand.

To know more about Identifier
https://brainly.com/question/14437126
#SPJ4

To generate two random integers within the range of minnum and maxnum, we can use the following code in Python:

import random

# Set the seed value

seedval = 12345

random.seed(seedval)

# Define the minimum and maximum numbers

minnum = 5

maxnum = 87

# Generate two random integers within the range

rand1 = random.randint(minnum, maxnum)

rand2 = random.randint(minnum, maxnum)

# Output the random integers

print(rand1)

print(rand2)

To know more about coding visit:

https://brainly.com/question/17293834

#SPJ1

You can display hyperlinks without an underline by using the CSS "text-decoration: none" property. You can add this to the link's CSS selector

a {

  text-decoration: none;

}

What is Hyperlinks?
Hyperlinks are pieces of code that allow users to click on text or images, and be taken to a different webpage or document. They are often used to navigate between different webpages within a website, as well as to link to other websites. Hyperlinks can also be used to link to files such as PDFs, Word documents, or even images. Hyperlinks are created using HTML code, which is a type of programming language used to create websites.

To know more about Hyperlinks
https://brainly.com/question/23413848
#SPJ4

The output of the code is "$810".

The expression "$" + f + 10 is evaluated as follows:

' f ' is an integer with the value of 8, so f + 10 evaluates to 18.

The string "$" is concatenated with the result of f + 10, resulting in the string "$18".

The final result is printed to the console using the println method, so the output is "$810".

The output of the code is "15".

The code sets the value of ' e ' to ' 12 ' in the first line, then re-assigns it to ' 15 ' in the second line. The final value of ' e ' is ' 15 '.

In the third line, the value of ' e ' is printed to the console using the ' println ' method, so the output is "15".

The expression j *= i + 2 means to multiply j by the value of i + 2 and assign the result back to j. So in this case, j becomes j * (i + 2) = 10 * (7 + 2) = 10 * 9 = 90.

In the third line, the values of i and j are concatenated with a space in between and printed to the console using the println method, so the output is "7 29".

UML Use Case diagram models the system's functionality and interactions with actors to capture all use cases, ensuring it meets end- needs, with scalability & security as critical technical requirements.

A UML Use Case diagram is a visual representation of the system's functionality and the interactions between the system and its actors (users or external systems). It captures all possible use cases of a system and is used to model the requirements of the system.

The Use Case diagram typically includes the use cases (represented by ovals) that represent the functionality of the system, actors (represented by stick figures) that interact with the system, and the relationships between the actors and the use cases.

To create a UML Use Case diagram, one needs to identify all possible use cases and actors of the system, and then model them using the UML notation, which includes different types of relationships such as includes, extends, and generalization.

When creating a UML Use Case diagram for a system, it is essential to capture all the required functionality of the system and ensure that all actors that interact with the system are identified. This ensures that the system is designed to meet the needs of the end-users.

Creating UML Use Case diagrams can be challenging, especially for complex systems. One possible challenge is choosing the right level of detail to include in the diagram. However, this can be overcome by breaking the system down into smaller, manageable subsystems and creating separate Use Case diagrams for each subsystem.

Learn more about UML here:

https://brainly.com/question/28269854

#SPJ4

Answer:

to allow for dynamic updates of the network

Explanation:

ARP is used to map an IP address to a physical (MAC) address on a local network, and the ARP table is used to store these mappings for quick access.

However, the physical addresses of devices on a network can change over time, for example due to replacement or failure of a device, or when a device moves from one network segment to another. To handle these changes, ARP entries are set to expire after a certain amount of time, typically a few minutes. This forces the device to send a new ARP request to update the mapping if it needs to communicate with the device again, which helps ensure that the ARP table always reflects the current state of the network.

By having ARP entries expire, the ARP table remains accurate and up-to-date, even in environments where devices are frequently added or removed from the network. This helps ensure that IP-to-MAC mappings are always accurate and helps prevent communication errors.

Answer:

RAID-10

Explanation:

In RAID-10, data is mirrored to two or more disks and striped across multiple disks, so that data can be read from multiple disks in parallel, providing improved performance. Additionally, because data is mirrored, the failure of one disk will not result in data loss, as the data can be reconstructed from the other disk(s).

For these reasons, RAID-10 is considered a better option for mission critical applications, as it provides both increased performance and data redundancy. In contrast, RAID-5 provides data redundancy through parity, but does not provide the same level of performance as RAID-10, and can be less reliable in the event of disk failure.

It's worth noting that RAID-10 is generally more expensive than other RAID levels due to the need for multiple disks, but the increased reliability and performance make it a good choice for mission critical applications where data loss and downtime can be devastating.

The Redundant Array of Independent Disks (RAID) that combines mirroring and striping and is the better option for mission critical applications is RAID-10.
RAID-10 combines the features of RAID-1 (mirroring) and RAID-0 (striping) to provide both data redundancy and increased performance. It is often used in mission critical applications because it can withstand multiple drive failures without losing data. RAID-5 also provides data redundancy and increased performance, but it is not as reliable as RAID-10 in the event of multiple drive failures. RAID-1 provides data redundancy but does not offer increased performance, and RAID-0 offers increased performance but does not provide data redundancy.

Learn more about RAID-10 here: https://brainly.com/question/28963056

#SPJ11

Answer:

this is the correct answer

Following are the type of searches

1. advanced search, 2. simple search, 3. Advanced search, 4. simple search

A thorough search of the entire dictionary text is done using the advanced search. Anywhere your term appears in the dictionary, it will discover it. This might appear as the title of an entry, a phrase within the definition of another word, a quotation, etc. Most searches will produce either too many or not enough results. Taking a look at hundreds of records takes a while. You can save a ton of time by making a small effort when creating search strings—what you write into the search box.

The default search box used by the majority of library databases is a straightforward one. All fields of the library database collection are searched for items. All terms or keywords typed in the search field are looked up.

To know more about advanced search, check out:

https://brainly.com/question/20014042

#SPJ1

Let's go through Python

[tex]\tt s=0[/tex]

[tex]\tt for\:i\:in\:range(1,10):[/tex]

[tex]\quad\tt s+=i[/tex]

[tex]\tt print("Sum=",s)[/tex]

In Design view or Layout view, you can modify the PageHeader property. Every page in a report, including the first and last, often has a report page header printed by Access.

A footer is text that appears at the bottom of a page, while a header appears at the top of the page. These spaces are typically used for inputting document information, such as the document's title, chapter heading, page numbers, creation date, and similar items.

If necessary, place the pointer to the right of the footer and use the Tab key to navigate to the where you wish the page number to appear. After selecting a number, click the Page Number button and then Current Position. Selecting Bottom of Page will remove the current footer, so AVOID using that option.

To know more about Access visit:-

https://brainly.com/question/29992975

#SPJ1

The SELECT clause is used to specify the columns to be displayed in the query result. The FROM clause is used to specify the table or tables containing the columns listed in the SELECT clause. The WHERE clause is used to extract only those records that fulfill a specified condition. All three of these clauses are valid, so the correct answer is "none of the above".

The SELECT clause is used to specify which columns are to be part of the result set of a query. It can specify one or more columns, and can use various operators, such as mathematical operators and comparison operators. The FROM clause is used to specify the table or tables from which the columns listed in the SELECT clause will be extracted. It can also specify joins between tables, and can use various operators, such as join operators and set operators. The WHERE clause is used to extract only those records from the result set that fulfill the condition specified in the WHERE clause. This condition can include comparison operators, logical operators, and various other operators, depending on the query. All three of these clauses are necessary components of a query, and they play an important role in the construction of a query.

the complete question is :

which of the following is incorrect? a select clause specifies the columns to be displayed a from clause specifies the table containing the column(s) listed in the select clause a where clause is used to extract only those records that fulfill a specified condition none of the above

Options :

a select clause specifies the columns to be displayed

a from clause specifies the table containing the column(s) listed in the select clause

a where clause is used to extract only those records that fulfill a specified condition

learn more about query here

https://brainly.com/question/14311643

#SPJ4

To compute the maximum relative error, we first compute the absolute difference between the predicted and actual wind speeds and divide it by the actual wind speed to get the relative error for each day.

Here's a code snippet in Python that computes the maximum relative error of Paul's wind speed predictions using NumPy:

import numpy as np

# Given variables

n = 7  # number of days predicted

predicted = np.array([10, 12, 8, 14, 16, 9, 11])  # predicted wind speed for these days

actual = np.array([11, 10, 12, 13, 15, 8, 10])  # actual wind speed for these days

# Compute maximum relative error

rel_error = np.abs(predicted - actual) / actual

max_rel_error = np.max(rel_error)

print("Maximum relative error:", max_rel_error)

In this example, we assume that Paul has predicted the wind speed for 7 days, and the predicted wind speeds are stored in the predicted NumPy array. The actual wind speeds for these days are stored in the actual NumPy array.

Learn more about NumPy :

https://brainly.com/question/12907977

#SPJ4

The server needs to store n x n files, each with a unique URL, to allow the player to choose any of the n video versions and any of the n audio versions at any given time.

If we want to allow the player to choose any of the n video versions and any of the n audio versions at any given time, and the audio is mixed with the video, then the server needs to store n x n files.

For each of the n video versions, there are n audio versions that can be mixed with it, resulting in n x n possible combinations. Each of these combinations will need to be stored as a separate file on the server, with a unique URL.

Therefore, the total number of files the server needs to store is n x n, each with a different URL.

Let's say we have n video versions and n audio versions, where each video and audio version is represented by a unique quality and bit rate. To create a file that includes a specific video and audio combination, we need to mix the video and audio streams together. This means that the server needs to store n x n files, where each file is a unique combination of one video version and one audio version.

For example, let's say we have 3 video versions (V1, V2, V3) and 3 audio versions (A1, A2, A3). The server needs to store a file for each of the 9 possible combinations:

Each of these combinations is a unique media stream and will require a separate URL. Therefore, the server needs to store 9 different files, each with a unique URL, to allow the player to choose any of the n video versions and any of the n audio versions at any given time.

Learn more about URL here:

https://brainly.com/question/18355442

#SPJ4

You should purchase a tablet device, such as an laptop  iPad or Android tablet, that is small and portable, and ideal for reading, watching movies, and listening to music. It is not suitable for multitasking or content creation.

If you want a small, portable system, and you intend to use it mainly to consume content such as books, music, and videos, then a tablet device is the best option. Tablets such as the iPad or an Android tablet are ideal for this purpose, as they are compact and easy to carry around. They are also great for consuming content, as they feature large and vibrant screens to view videos and e-books, as well as excellent speakers for listening to music. However, they are not suitable for creating content or multitasking, as they are not as powerful as a laptop or desktop computer. If you want a device for content creation or multitasking, then you should consider purchasing a laptop or desktop computer instead.

Learn more about laptop here:

brainly.com/question/15244123

#SPJ4

Answer:

Where's the array for stuff?

Explanation:

Depending on how stuff[0] was declared or instantiated because I'm assuming it's not a constant, I need more info on stuff.

The Python program to get the scores secured by a student in five subjects namely subject1, subject2, subject3, subject4, subject5 is in the explanation part.

Making a set of instructions that instruct a computer how to carry out a task is the process of programming. Computer programming languages like JavaScript, Python, and C++ can all be used for programming.

Here is a Python program that accomplishes the requirements listed in the question. The program assumes that the user will enter valid integer scores between 0 and 100 for each subject.

subject1 = int(input("Enter score for subject1: "))

subject2 = int(input("Enter score for subject2: "))

subject3 = int(input("Enter score for subject3: "))

subject4 = int(input("Enter score for subject4: "))

subject5 = int(input("Enter score for subject5: "))

total_score = subject1 + subject2 + subject3 + subject4 + subject5

avg_score = total_score / 5

if avg_score > = subject4:

   print("The average score is greater than or equal to subject4 score")

else:

   print("The average score is less than subject4 score")

if subject1 == subject5:

   print("Subject1 score is equal to subject5 score")

else:

   print("Subject1 score is not equal to subject5 score")

if subject2 < = subject3:

   print("Subject2 score is less than or equal to subject3 score")

else:

   print("Subject2 score is greater than subject3 score")

del subject5

new_avg_score = (total_score - avg_score) / 4  

new_subject5_score = 95 * 5 - total_score + new_avg_score

print("To get an average score of 95, the student needs to score", new_subject5_score, "in subject5")

if new_subject5_score < = 100:

   print("It is possible to get that score")

else:

   print("It is not possible to get that score")

Thus, the program takes user input for the five subject scores and calculates the average score.

For more details regarding programming, visit:

https://brainly.com/question/11023419

#SPJ1

3. Write a Python program stored in file that:

A.Gets the scores secured by a student in five subjects namely subject1, subject2, subject3, subject4, subject5. Calculate the average score of all the subjects and store it in a variable called avg_score. Note: The scores entered must be greater than zero and the maximum score that the student can score in each subject is 100.

B. Checks if the variable avg_score is greater than or equal to subject4 score and prints the result.

C. Checks if subject1 score is equal to subject5 score and print the result.

D. Checks if subject2 score is less than or equal to subject3 score and print the result

.E. Deletes the variable in which subject5 score is stored. The student is writing the test for subject5 again. What score should the student get in subject5 to get an average score of 95? Print the score. Is it possible to get that score? Print the result.

An apts require the use of sql injection attacks is not correct about an advanced persistent threat (apt).

Option D is correct.

The special-purpose programming language SQL (Structured Query Language) is used to manage data in relational databases. It is made so that people can query, change, and manage data in relational databases. Millions of users worldwide use it, making it the most popular database language.

SQL can be used to query and manipulate the data that is stored in databases as well as to create, update, and delete databases. Since it is a declarative language, users are able to specify the data they want rather than how to obtain it. Additionally, SQL is a powerful language for combining data from multiple tables, making it possible for users to construct intricate data queries and reports.

Learn more about SQL:

brainly.com/question/25694408

#SPJ4

It's true what is said here. In a frequency distribution, the bin widths are typically equal.

When displaying numerical data, a histogram divides the data into "bins" of equal width. Each bin is represented graphically by a bar whose height reflects the number of data points it contains. Intervals, classes, and buckets are other names for bins.

When grouping values in a chart, bins are single continuous value ranges. Binning data makes data visualisations easier to understand so that users can quickly identify outliers and gain a sense of the distribution of their data.

Learn more about bins here:

https://brainly.com/question/29381794

#SPJ1