The best first step to take is to back up all important data and files. This should be done immediately, as it may be the only way to protect the customer’s data from being lost if the hard disk fails.
What is data?Data is an umbrella term used to describe information that has been collected and stored, either electronically or physically. Data can take many forms, such as numbers, words, images, video, and audio recordings. Data can come from many sources, both digital and physical, including sensors, surveys, interviews, photos, and more.
After the data is backed up, the customer should then run a reliable defragmentation tool to make sure the data is properly organized on the hard drive. Once this is done, the customer should then run a hard drive test to verify the condition of the hard disk and to see if the error is indeed legitimate. If the error is legitimate, then the customer can use chkdsk to correct any bad areas on the drive.
To learn more about data
https://brainly.com/question/28140546
#SPJ4
a flowchart is a way to visually represent an algorithm. the flowchart below uses the following building blocks. a table is shown with two columns titled block and explanation. in the first row it reads oval then a picture of an oval in the left column, and the start or end of the algorithm in the right column. in the second row it reads rectangle then a picture of a rectangle in the left column, and one or more processing steps, such as a statement that assigns a value to a variable in the right column. in the third row it reads diamond then a picture of a diamond in the left column, and a conditional or decision step, where execution proceeds to the side labeled true if the condition is true and to the side labeled false otherwise in the right column. in the fourth row it reads parallelogram and a picture of a parallelogram in the left column, and displays a message in the right column. a flowchart of an algorithm is shown. at the top is an oval with the word start in it. an arrow points down from start to a rectangle in which it reads count left arrow 1. an arrow points down from this rectangle to the top of a diamond in which it reads count less than 5. an arrow points down from the count less than 5 diamond to a rectangle in which it reads count left arrow count plus 1, and the word true is written next to the arrow pointing down to this rectangle. an arrow points down from the bottom of this last rectangle, and the arrow turns to the left then up then right until it meets the left side of the count less than 5 diamond. an arrow points to the right from the right corner of the count less than 5 diamond to a parallelogram in which it reads display open parentheses count close parentheses, and the word false is written next to the arrow pointing to this parallelogram. another arrow points down from the bottom of this parallelogram to an oval in which it reads end. what is displayed as a result of executing the algorithm in the flowchart? responses 5 5 15 15 1 2 3 4 1 2 3 4 1 2 3 4 5
Displayed as a result of executing the algorithm in the flowchart will be the number 5.
The algorithm in the flowchart starts by initializing a variable "count" to 1. It then enters a loop where it checks if "count" is less than 5. If it is, the "count" variable is incremented by 1 and the loop continues. If "count" is not less than 5, the loop exits and the value of "count" is displayed in a parallelogram before the algorithm ends. So the final output will be the number 5.
A flowchart is a diagram that displays the individual steps of a process in the right sequence. It is an all-purpose tool that can be customised for a variety of tasks and used to specify a range of procedures, such as a project plan, an administrative or service process, or a manufacturing process.
Learn more about algorithm here:
https://brainly.com/question/17780739
#SPJ4
T/F : cyberbullying is a person within the organization who is trusted to monitor, contribute, filter, and guide the social media presence of a company, individual, product, or brand.
Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying.
What does about cyberbullying provide as an example?Constantly sending a classmate unpleasant messages via instant message is one example of "cyberbullying." uploading embarrassing photos of classmates without their consent, utilizing email to spread rumors about pupils at school.Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying. It can involve disclosing sensitive or private information about another individual in a way that causes embarrassment or humiliation. Some forms of cyberbullying go too far and become illegal or criminal.Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying. It can involve disclosing sensitive or private information about another individual in a way that causes embarrassment or humiliation.To learn more about cyberbullying refer to:
https://brainly.com/question/1460915
#SPJ1
what is the best malware cleaner to use in addition to a security program for chrome
Best malware cleaner for chrome as security program is Nortan360 which is great antivirus.
Malware: Any intrusive program created by cybercriminals (often referred to as "hackers") to steal data and harm or destroy computers and computer systems is referred to as malware, which is short for "malicious software." Malware types that are frequently encountered include worms, Trojan horses, spyware, adware, and ransomware.
Nortan360:Gen Digital Inc. (formerly Symantec) created Norton 360, a "all-in-one" security solution for the consumer market. It was initially introduced in 2007, and it was withdrawn in 2014. Norton Security, its replacement, kept its functionality.
Know more about malware:
https://brainly.com/question/14276107
#SPJ4
Rizwan, a data analyst, is generating a report by pulling data from multiple databases and analyzing it. The data processing application is resource-intensive, so Rizwan wants to ensure that other applications do not consume resources that this application needs.How can Rizwan boost the performance of the data processing application?
Reduce the actual memory while increasing the virtual memory Rizwan boost the performance of the data processing application.
What is a data analyst?
To find the solution to a problem or provide an answer to a question, a data analyst gathers, purifies, and analyses data sets. They work in a variety of fields, including as government, business, finance, law enforcement, and science.
What types of clients ought a company to focus on in its upcoming advertising campaign? Which age range is most susceptible to a specific disease? What behavioural trends are associated with financial fraud?
As a data analyst, you might have to respond to inquiries like these. Learn more about what a data analyst does, what skills you'll need, and how to get started on your path to becoming one by reading on.
Read more about data analyst:
https://brainly.com/question/28375055
#SPJ4
when you copy and paste a formula with absolute cell references, excel substitutes new references to reflect the new formula location.T/F
Square bracket computations are performed first in formulas. Using samples from your worksheet, you can enter data in a cell by using the flash fill function.
When copying and pasting a formula with precise cell references, what happens?
Absolute and relative cell references are available. When copied and pasted into other cells, absolute and absolute references behave differently. When you copy a formula to either a different cell, its and/ change.
What occurs when a formula with an absolute reference to a new location is copied?
Regardless of where you replicate a formula that contains an absolute reference, the copied formula's cell reference remains the same. A dollar symbol is used before an absolute cell reference.
To know more about worksheet visit:-
brainly.com/question/13129393
#SPJ4
Select all the correct answers.
Which TWO types of code does machine language consist of?
binary code
source code
MEDIO C
procedural code
hexadecimal code
Patung
humikams
enter
Shilienne
You can not convert binary 1 to 1 to original source code on C++ or something alike.
what is binary code and source code?
Binary Code means Code that loads and executes without further processing by a software compiler or linker or that results when Source Code is processed by a software compiler. “Source Code” means human-readable form of Code and related system documentation, including comments and any procedural language.Source code is generally understood to mean programming statements that are created by a programmer with a text editor or a visual programming tool and then saved in a file. Object code generally refers to the output, a compiled file, which is produced when the Source Code is compiled with a C compiler.binary code, code used in digital computers, based on a binary number system in which there are only two possible states, off and on, usually symbolized by 0 and 1.To learn more about code refers to:
https://brainly.com/question/1697758
#SPJ1
You can not convert binary 1 to 1 to original source code on C++ or something alike.
What is binary code and source code?Binary Code means Code that loads and executes without further processing by a software compiler or linker or that results when Source Code is processed by a software compiler. “Source Code” means human-readable form of Code and related system documentation, including comments and any procedural language.
Source code is generally understood to mean programming statements that are created by a programmer with a text editor or a visual programming tool and then saved in a file. Object code generally refers to the output, a compiled file, which is produced when the Source Code is compiled with a C compiler.
binary code, code used in digital computers, based on a binary number system in which there are only two possible states, off and on, usually symbolized by 0 and 1.
To learn more about code refers to:
https://brainly.com/question/26995556
#SPJ1
when stacking, interlocking rows should be used to minimize the risk of any becoming destabilized and falling.
The statement is True.
This is because when stacking items it is important to use interlocking rows to minimize the risk of any becoming destabilized and falling.
This can be achieved by placing the items in a way that the weight of each item is supported by the one below it, creating a stable structure.
For example, if you are stacking boxes, you would want to place the corners of one box into the crevices created by the corners of the box below it. This creates a stable structure that is less likely to tip or fall over.
Another way to minimize the risk of items becoming destabilized and falling is to use appropriate materials to secure the stack. Strapping or shrink-wrap can be used to hold the items together and prevent them from shifting or falling over.
Also, using pallets or other base materials to elevate the stack off the ground can also help to stabilize it and reduce the risk of it falling over.
It's also important to consider the weight and size of the items being stacked, stacking heavy items on top of lighter ones can be dangerous because the weight of the top items may cause the bottom items to collapse. It is also important to consider the height of the stack and make sure it is not too tall, as a tall stack can be more likely to topple over.
To learn more about stacking, use the link:
brainly.com/question/24671121
#SPJ4
Which one of the following statements is most correct about data...Which one of the following statements is most correct about data encryption as a method of protecting data?It should sometimes be used for password filesIt is usually easily administeredIt makes few demands on system resourcesIt requires careful key management
According to the question,It requires careful key management.system resources requires careful key management.
What is the management?Management is the process of organizing and controlling resources in order to achieve desired objectives. It involves the development of a strategic plan that outlines the goals and objectives of an organization, followed by the implementation of the plan and its management. Management also involves monitoring progress, evaluating performance, and making changes when necessary. It is a dynamic process that involves decision making, problem solving, process improvement, and communication.
To learn more about management
https://brainly.com/question/24027204
#SPJ4
John needs to install a web server that can offer SSL-based encryption. Which of the following ports is required for SSL transactions? For clients to connect to the server via SSL, the server must have inbound port 443 open.
Inbound port 443 must be open on the server for clients to connect to it using SSL.
What do you mean by web server ?A web server is a machine that houses web server software and the files that make up a website (for example, HTML documents, images, CSS stylesheets, and JavaScript files). A web server establishes a connection to the Internet and facilitates the physical data exchange with other web-connected devices. A web server is software and hardware that responds to client requests sent over the World Wide Web using the HTTP (Hypertext Transfer Protocol) and other protocols. A web server's primary responsibility is to show website content by storing, processing, and sending webpages to users.
To know more about web server , visit
https://brainly.com/question/26281028
#SPJ4
Which of the following refers to an internal group that defines and maintains project standards across the organization?1 / 1 pointClassic organizational structureProject Management Office (PMO) Matrix organizational structureProject Planning Office (PPO)
Project Management Office (PMO)refers to an internal group that defines and maintains project standards across the organization
What is Project Management Office?
A organization, agency, or department known as a project management office (PMO) establishes and upholds a company's project management standards. The PMO is entrusted with making sure projects are delivered on schedule and under budget while holding onto the paperwork and metrics for project execution.
A PMO's main objective is to gain advantages from standardized and adhering to project management procedures, rules, and techniques. PMOs can occasionally exist outside of a company. For maximum effectiveness, PMOs—internal or external—should reflect the culture and strategy of the company.
to know more about Project Management Office, visit
https://brainly.com/question/17138012
#SPJ4
_______ are created within ________, similar to how you create individual files within a broader file folder.
A) Streams, Tabs
B) Tabs, Streams
C) Engagements, Publisher
D) Libraries, Engagement
E) Arrows, Columns
The correct answer is B) Tabs, Streams similar to how you create individual files within a broader file folder.
A tab is a clickable section at the top of a window in computer software (such as an Internet browser) that displays another page or region. Any open tabs are hidden and the contents of the selected tab are shown. You may switch between settings in a software, different documents, or web sites using tabs. Text alignment is done using tabs, a paragraph formatting feature. Word inserts a tab character and shifts the insertion point to the tab setting, also known as the tab stop, when you hit the Tab key. Both custom tabs and Word's default tab settings are options.
To learn more about Tabs click the link below:
brainly.com/question/17643845
#SPJ4
which of the following are human considerations in process technology? multiple select question. training safety job loss initial costs consultants
The Five Human Factors technique is all about researching the physical, mental, social, cultural, & emotional aspects of a comprehensive consumer experience. All Five Human Factors enhance field consumer observations once an innovation project is at the observation phase.
What exactly are human factors at work?
Human factors, then, is concerned with what people are asked to do (the task and its characteristics), who they are doing it with (the individual and their competence), and where they are working (the organisation and its attributes), all of which are influenced by the larger societal concern, both local and national.
What do human factor techniques entail?
The study of human factors (HF) examines how people use technology.
To know more about technology visit:-
brainly.com/question/9171028
#SPJ4
You are working with the penguins dataset. You create a scatterplot with the following code: geom_point(mapping = aes(x = flipper_length_mm, y = body_mass_g)) You want to highlight the different penguin species on your plot. Add a code chunk to the second line of code to map the aesthetic shape to the variable species. Which penguin species does your visualization display?
In smaller datasets, adding a tiny degree of random variation to the location of each point is an effective technique to manage overplotting brought on by discreteness.
According to the documentation for geom jitter(), there are two arguments for jitter: height and width, which determine how much space is moved horizontally and vertically. With the help of the geom point() function, which is one of many geom functions included with ggplot2, you may add a layer of points to your plot to produce a scatterplot. The discrete variable color (for diamond colors) by the discrete variable cut will be plotted using the diamonds data set [in ggplot2] (for diamond cut types). The plot is produced using the geom jitter function ().
Learn more about variable here-
https://brainly.com/question/12296810
#SPJ4
which of the following is the correct way to write a method that changes the name of a shoppingitem object's name variable? (select all correct answer(s))
The code that changes the name of a shoppingitem object's name is
}
public void changeName(String newName)
this.name = newName;
}
public void setName(String newName) {
this.name = newName;
}
What is Void?The void keyword designates that a function doesn't return a value when it is used as a function return type. Void indicates that there are no parameters for the function when it is used for the parameter list. Void designates that a pointer is "universal" when it is used in the declaration of a pointer.
If the type of a pointer is void*, it can point to any variable that isn't declared with the const or volatile keywords. No other type can be cast onto a void* pointer, so it cannot be dereferenced. Any other data pointer type may be created from a void* pointer.
To know more about Void
https://brainly.com/question/13439673
#SPJ4
Alma bought a laptop computer at a store that gave a 20 percent discount off its original price. The total amount she paid to the cashier was p dollars, including an 8 percent sales tax on the discounted price. Which of the following represents the original price of the computer in terms of p? A. 0.08p B. p/0.88 C. (0.8)(1.08)p D. p/(0.8)(1.08)
Alma bought a laptop computer at a store that offered a 20% discount off the original price. The original price of the computer is represented by p/(0.8) (1.08).
Let the laptop's original cost be =L
After a 20 % discount, its price will be (100−20)%×L=0.8L
8 % sales tax on this price =(100+8)%×0.8L=1.08×0.8L
So, p=1.08×0.8L
⇒L= p/(0.8)(1.08)
A laptop is a portable personal computer that can be utilized in a number of settings. Since most laptops are made to perform every function a desktop computer can, they typically have the same software capabilities and can access the same kinds of files. But they are also typically more expensive than equivalent desktop PCs.
The Dell Latitude D610 laptop contains all of the necessary components for standard functioning, as seen in the image. It features a touchpad, keyboard, and LCD display. There are some significant differences between desktop computers and laptops as a result of the portability of the former.
Learn more about laptop here:
https://brainly.com/question/15244123
#SPJ4
To get data from a text file, the Scanner and File class are used. a loop structure is used. Which of the following is used to control the loop?
A. a boolean variable
B. hasNext() method in Scanner class
C. end of file pointer
D. the loop stops automatically when all records are read.
The hasNext() method in the Scanner class is used to check if there is another line in the text file that can be read.
What is Scanner?A Scanner is a device that reads text or an image and converts it into a form that a computer can understand and process. It is often used to capture data from printed documents and forms, such as health records, financial documents, and business forms. Scanners are also used to create digital copies of artwork and other items. Scanners are available in different types and sizes, from small handheld models to large office machines. The most common types of scanners are flatbed, sheet-fed, and handheld. Flatbed scanners use a single flat surface to capture images, while sheet-fed scanners use rollers to draw documents through the scanner. Handheld scanners are designed for portability and are often used for data entry in small offices.
The loop will continue to run if there is another line to be read, and it will exit the loop if there are no more lines to be read.
To learn more about Scanner
https://brainly.com/question/24937533
#SPJ4
In the heterozygous state of HbS, referred to as sickle cell trait, which of the following hemoglobins appear in combination with HbS?HbA
In the heterozygous state of HbS, referred to as sickle cell trait, Case Study appear in combination with HbS.
What do you mean by heterozygous state?(HEH-teh-roh-ZY-gus JEE-noh-tipe) an gene region containing two different alleles. A heterozygous genotype can consist of one normal allele but one mutated allele, or two separate mutated alleles (compound heterozygote). If the two versions differ from one another, you get a heterozygous genotype for that gene. For example, having one gene of red hair one and allele for brown hair could suggest that you are hair colour heterozygous. Which traits are expressed are determined based on how the two alleles are connected. In genetics, being heterozygous involves inheriting different alleles (variations) of a specific genomic marker from each biological parent. A person is thought to be heterozygous for a genetic marker if they have two copies of it.
To know more about heterozygous state , visit
brainly.com/question/28313249
#SPJ4
fill in the blank. the___element, a hypertext markup language (html) metadata element, contains a collection of metadata elements that describe the document or provide instructions to the browser. list head body html
The head element, a hypertext markup language (html) metadata element, contains a collection of metadata elements that describe the document or provide instructions to the browser.
HTML is a markup language that is used to create web pages., a markup language. It specifies how a web page should look and how to present content using elements. It therefore creates or specifies the structure of our web page. Please save your file with the.html extension, as always. In this HTML tutorial, we'll go over all the fundamental ideas you need to know to get started with HTML.
Between the html and body tags, the <head> element serves as a container for metadata (info about data). Data about the HTML document is known as metadata. There is no display of metadata. Metadata is frequently used to define the document title, character set, styles, scripts, and other meta data.
Know more about HTML:
https://brainly.com/question/24065854
#SPJ4
A relational database query normally returns many rows of data. But anapplication program usually deals with one row at a time. Which of thefollowing is used to bridge this gap allowing the program to deal with onrow at a time?Select one:a. Cursorb. Triggerc. PL/SQLd. Sub select join
A cursor is a special type of loop that allows an application program to retrieve one row at a time from a query result set and process it before retrieving the next row.
What is cursor?A cursor is a small symbol or graphical image on a computer screen that indicates the position at which the next action, such as typing or clicking, will take place. Depending on the operating system and type of user interface, the cursor may appear as a blinking line, a solid block, or an image representing the action that will take place if the user presses a mouse button. It is used to help the user navigate and manipulate text, images, and other objects on the screen. Cursors are used in many software applications, such as document editors, spreadsheets, and image manipulation programs, and they provide important visual cues that help users interact with the computer more efficiently.
It allows the program to process the data one row at a time without having to store the entire result set in memory.
To learn more about cursor
https://brainly.com/question/30260912
#SPJ4
A Virtual Private Network (VPN) uses a particular layer from the OSI reference model to carry an encrypted payload that actually contains an entire second set of packets. Which layer is used?
Transport layer is used when a Virtual Private Network (VPN) uses a particular layer from the OSI reference model to carry an encrypted payload that actually contains an entire second set of packets.
What is VPN?Virtual private network, or VPN, is the name of a service that creates a private and secure connection to the internet. In order to safeguard your private information and communications, conceal your IP address, and enable secure use of public Wi-Fi networks, a VPN creates an encrypted tunnel.
Your personal information and online privacy are protected by a VPN. Read our comprehensive VPN guide to learn what a VPN does, how it operates, and how it can protect you. By downloading a strong and lightning-fast VPN app, you can immediately increase your privacy and learn the practical meaning of a VPN.
Learn more about VPN
https://brainly.com/question/29432190
#SPJ4
list [11, 35, 6, 0] display (mystery (list)) procedure mystery (list) { sum 0 for each item in list { sum sum item } return sum / length (list) }
The given procedure mystery(list) takes in a list as an argument and performs the following actions:
Initializes a variable sum to 0
Loops through each item in the list
Adds the current item to the sum variable
After the loop, it returns the value of sum divided by the length of the list.
When the list [11, 35, 6, 0] is passed to the procedure, the following steps occur:
The variable sum is initialized to 0
The first item in the list is 11, so 11 is added to sum
The second item in the list is 35, so 35 is added to sum
The third item in the list is 6, so 6 is added to sum
The fourth item in the list is 0, so 0 is added to sum
The procedure returns the value of sum (52) divided by the length of the list (4), which is 13
So the output of the procedure when passed the list [11, 35, 6, 0] is 13.
The ________ report describes the current information system, the requirements for a new system, and a possible development schedule.A) Top-Down AnalysisB) Data FlowC) Systems AnalysisD) Components"
Answer: systems analysis
Explanation: The systems analysis stage is documented in a report for higher management. The report describes the current information system, the requirements for a new system, and a possible development schedule. Management studies the report and decides whether to continue with the project.
which of the following supports different protocols through the same post as long as the correct adapter is used?
Protocols through the same post as long as the correct adapter is used Router
What is Protocols?Protocols are sets of rules or procedures for communication between different devices within a computer network. They are designed to ensure that communication is reliable, secure, and efficient. Protocols define the format, sequencing, and error-correction of data being transmitted, allowing for the sharing of data between two devices. Protocols are used in a variety of applications, ranging from email and web browsing to voice and video conferencing. Protocols are also used to secure data transmissions, with encryption and authentication protocols used to protect data and ensure the authenticity of the sender and receiver.
To learn more about Protocols
https://brainly.com/question/29478511
#SPJ4
Complete Question:
which of the following supports different protocols through the same post as long as the correct adapter is used?
A. Network Switch
B. Router
C. Modem
D. Network Interface Card
imagine two producers (pa and pb) both calling into put() at roughly the same time. assume producer pa gets to run first, and just starts to fill the first buffer entry (fill
Imagine two producers (Pa and Pb) both calling into put() at roughly the same time. Assume producer Pa gets to run first, and just starts to fill the first buffer entry (fill = 0 at line f1).
This is a scenario that can occur in concurrent programming, when multiple threads or processes are trying to access and modify a shared resource, such as a buffer, at the same time.Before Pa gets a chance to increment the fill counter to 1, it is interrupted. This means that the execution of the Pa's process is paused, and another process or thread (in this case Pb) is given the opportunity to execute. If Pb also tries to fill the same buffer entry, it may also try to increment the fill counter to 1, resulting in a race condition.A race condition occurs when two or more threads can access shared data and they try to change it at the same time. As a result, the values of variables may be unpredictable and vary depending on the timings of context switches of the processes.It is important to note that the scenario described in the prompt is a simple example of a race condition, in the real-world systems it can be much more complex and harder to detect.
Find out more about producers
brainly.com/question/14283682
#SPJ4
You have an Azure subscription that includes a virtual network named VNet1.
You plan to create a web app named WebApp1 and deploy it to VNet1.
You need to prepare the environment for the planned web app. The solution must minimize costs.
Which app service plan size should you use?
Select only one answer.
Dev / Test F1
Dev / Test B1
Production P1V2
Production P3V3
Isolated I1V2
The app service plan size that should be used is option A: Dev / Test F1.
What is the virtual network about?Azure App Service plans determine the resources and features available to your web apps, such as the number of CPU cores, memory, and automatic scaling. You can choose from several different app service plan sizes, each with different pricing and capabilities.
The Dev / Test F1 app service plan is the least expensive option and it's suitable for development and testing environments.
Therefore, Dev / Test B1, Production P1V2, Production P3V3, and Isolated I1V2 are all more expensive options that are intended for production environments. They offer more resources and higher availability, but they also come at a higher cost. Since the goal is to minimize costs, the least expensive option would be the best choice for this scenario.
Learn more about virtual network from
https://brainly.com/question/30206213
#SPJ1
What will be the result after the following code is executed, assume the code has been compiled?
int counter = 1;
final int MAX = 7;
while (counter <= MAX){System.out.print(counter + " ")counter = counter - 2;}
A. The program displays: 1 3 5 7
B. The program displays value: 7 5 3 1
C. The loop cannot run.
D. The loop is infinite.
Counter num. length is the instruction that should replace /* Missing Loop Header */ in order for the code section to function as intended ().
The software serves as an example of loops (the while loop). While statements are used in programs to carry out repeated actions. The while loop body must be run as long as the counter is lower than the length of the string num for the string to return 23456. Therefore, counter num.length is the loop header that is missing ().When a loop's code block is repeated until a condition is met and this condition is checked before the block is run, the loop is said to be pertest. To put it another way, a pertest loop tests the underlying condition first and then executes the loop's body if it is true. PS: The post-test loop is another sort of loop that performs the exact opposite of what the pertest loop does. The do-while loop is an illustration of this kind of loop.
Learn more about Loops here:
https://brainly.com/question/26171001
#SPJ4
fill in the blank. f everything in the system is working properly, high superheat after the evaporator with a piston shows___. the system is overcharged the system is undercharged the txv is underfeeding the capillary tube is clogged
The system is working properly, high superheat after the evaporator with a piston shows the system is overcharged.
What is system?
System is an interconnected set of several components working together to achieve a common goal. It is a combination of the elements which are connected, co-ordinate and interact with each other to produce a desired output. A system is a way of organizing and managing things which includes people, processes, technology, materials, equipment, and other resources. It can be an abstract concept or tangible object. A system helps to achieve specific goals by making the best use of available resources. It also supports the efficient use of resources and provides a structure for the organization to move towards its objectives. The components of a system are connected and co-ordinate with each other to produce an output. System helps to reduce the complexity of a problem and makes it easier to manage.
To learn more about system
https://brainly.com/question/24260354
#SPJ4
A _____ is an assault whose purpose is to disrupt computer access to an Internet service such as the Web or e-mail. a. zombieb. denial of service attackc. Trojan horsed. virus hoax
An assault called a "denial of service attack" aims to prevent users from using Online services like email or the Web.
What is E-mail
E-mail (electronic mail) is a system for sending and receiving digital messages over a computer network. It is one of the most common forms of digital communication, and is used for a wide range of communications, including business, personal and news-related messages. E-mail allows users to send messages quickly, conveniently and securely, and to store and archive messages for future reference. It is also used as a tool for collaboration, allowing people to work together on projects from any location.
To know more about E-mail
https://brainly.com/question/14666241
#SPJ4
A software architect is designing the database for the Department of Motor Vehicles in their state. They need to carefully consider which information in each user account should be considered PII, so that they can better protect those fields in the database. Which of the following pieces of user information is least likely to be considered PII?
The type of vehicle owned by the user is not likely to be considered PII. This is because this information does not necessarily identify a user and it is not used to verify any information about them.
What is information?Information is a general term for everything with the capacity to inform. Information is most fundamentally concerned with the interpretation of what may be sensed. Any naturally occurring process that is not entirely random, as well as any discernible pattern in any medium, can be said to convey some level of information. Other occurrences and artefacts, such as analogue signals, poems, photographs, music and other sounds, and currents, convey information in a greater continuous form than digital signals and many other data do. Information is not knowledge in and of itself, but rather the interpretational meaning that can be drawn from a representation.
Additionally, this type of information could be easily obtained from other sources and is not considered as sensitive as other pieces of information such as a driver's license number or address.
To learn more about information
https://brainly.com/question/26986135
#SPJ4
______ software is an application that enables users to enter typed text, handwritten comments, drawings, sketches, and links anywhere on a page and then save the page as part of a notebook.
Using note-taking software, users can add typed text, handwritten notes, doodles, links, drawings, and other content to any part of a page, and the page is then saved as a section of a notebook.
What is software application short note software?A computer's operating system and various activities are carried out by software, which is a collection of instructions, data, or programmes. In contrast, hardware refers to the components that make up a computer's physical structure. An application, script, or programme that runs on a device is referred to as "software" in general usage. Utilizing a computer to draught, edit, save, and print documents is referred to as word processing.
Word processors are specialised pieces of software that are required to do word processing. Although Microsoft Word is one popular example of a word processor, there are many other options available. Engineering Information systems Theory in Computer Science (MindTap Course List) The term "personal application software" refers to software that helps users to increase their productivity and quality of work while also boosting their personal effectiveness.
To learn more about note refer to :
https://brainly.com/question/28224061
#SPJ4
