2Na+S→Na2S

What is the total number of moles of S that react when 4.0 moles of Na were completely consumed?​

Depends on what kind of ions are present in the green solution

Explanation:

Cr3+, a famous green ion can obviously be displayed by a Cu2+ ion

https://brainly.in/question/47911070

Calcium nitrate is made up of 6 oxygen atoms, 2 nitrogen atoms and one calcium atom.

Ca(NO₃)₂

Thus, calcium nitrate is made up of 6 oxygen atoms, 2 nitrogen atoms and one calcium atom.

Learn more about calcium nitrate reactions here:

https://brainly.com/question/17171430

#SPJ10

Answer:

B)There are six atoms of oxygen.

C)There are two nitrogen atoms.

Explanation:

edge 2023

Answer:

32.0 is the answer which is divide able to 65 or -85

1.Four major features provide clues:

(1) The Sun, planets, and large moons generally rotate and orbit in a very organized way.

(2) With the exception of Pluto, the planets divide clearly into two groups: terrestrial and jovian.

(3) The solar system contains huge numbers of asteroids and comets.

(4) There are some notable exceptions to these general patterns.

2. Gravity causes the early solar nebula to collapse. The solar nebula flattens and warms at its core as it revolves. Within the spinning disk, planetesimals (early planets) begin to form.

3. Because the center of the revolving disk had the least amount of centripetal force, the majority of the mass from the nebula cloud was drawn to it by gravity. The majority of the material was hydrogen gas that was subjected to extreme pressure, which heated it to a critical point, causing it to fuse with another hydrogen atom, resulting in the formation of helium and the birth of the sun.

4. Nebular Theory: argues that when the Sun formed in the nebula, it created planets, asteroids, and other bodies from a spinning disk of materials known as the accretion disk. Almost all revolve in the same direction on their axes. Venus and Uranus are moving backwards on their axes.

5. In the inner solar nebula, only dense materials could condense. The Jovian planets are really denser than the terrestrial planets. Gravity compresses terrestrial planets to a greater extent, causing them to become denser. The gravity of the Sun drew dense materials into the inner solar system.

The nebular hypothesis has been given to states about the spinning dust cloud. The nebula started collapsing due to the force of gravity. It was formed by the rotation of the planets and celestial bodies.

The nebular hypothesis was to give the idea about the origin of the solar system based on dust and gases. According to the nebular hypothesis, the nebula started to collapse due to the force of gravity and the shock of the explosion from the Supernova.

The movement and rotation of the planets in orbits, revolutions, and motions suggest that the formation of the nebula along with asteroids and comets is the reason for its formation.

According to the hypothesis, the Sun was formed by the collapse of the heavy helium and hydrogen clouds that resulted in an increase in the temperature at the core and started to increase its temperature even more.

The hypothesis also accounts for the formation of the planets as the formation of the Sun and rotating dust and gases resulted in a rotating solar system that contained planets in it that was first released as planetesimals. The inner planets are denser compared to the outer planets because of the gravitation force.

Learn more about the nebular hypothesis, here:

https://brainly.com/question/1833220

#SPJ2

Explanation:

c and d. I'm not sure which one is better tho

Nitrogen fixation is the part of the nitrogen cycle where the nitrogen is fixed as nitric oxide. Urea {CON₂H₄} should be added to fertilizer to get the best results. Thus, option B is correct.

Fertilizers are substances that are composed of organic and inorganic compounds that are used to provide nutrients to the plants and crops for growth, development, pest, and insect resistance.

The fertilizers mainly comprise nitrogen, potassium, and phosphorus. Urea {CON₂H₄} has the maximum concentration of nitrogen (46%) and will be the most effective.

The other compound ammonium nitrate {NH₄NO₃} contains 34%, ammonium sulfate { (NH₄)₂SO₄} which comprises 21% of nitrogen by mass, whereas N₂F₂ is not used as a fertilizer.

Therefore, option B. Urea {CON₂H₄} is best to use as fertilizer.

Learn more about fertilizers here:

https://brainly.com/question/13121539

#SPJ2

According to the research, a nuclear reaction releases less energy per gram and appears to violate the law of conservation of mass.

It is a procedure that leads to combining and modifying the nuclei of atoms and subatomic particles and appears to violate the law of conservation of mass.

Through this kind of process, the nuclei can be combined or fragmented, absorbing or releasing particles and energy according to each case.

Therefore, we can conclude that according to the research, a nuclear reaction releases less energy per gram and appears to violate the law of conservation of mass.

Learn more about nuclear reactions here: https://brainly.com/question/1480032

#SPJ1

Investing   :

"I'm considering investing in equities."

"I need a system for handling my finances."

"I need to put money away for the future."

No Investment :

"My knowledge of investment is limited."

"I am unable to purchase stocks."

"I don't particularly enjoy taking chances."

Explanation:

These are accurate because I recently completed the course that taught me these things.

Learn ore about investing and no investment from here :

https://brainly.com/question/4459036?referrer=searchResults

#SPJ10

The volume of 0.125 mole of the gas at the same temperature and pressure 0.30 L

The new volume can be obtained as illustrated below

PV = nRT

Divide both side by P

V = nRT / P

Divide both side by n

V / n = RT / P = Constant

Thus,

V₁ / n₁ = V₂ / n₂

2 / 0.82 = V₂ / 0.125

Cross multiply

0.82 × V₂ = 2 × 0.125

Divide both side by 0.82

V₂ = (2 × 0.125) / 0.82

V₂ = 0.30 L

Learn more about ideal gas equation:

https://brainly.com/question/4147359

#SPJ12

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

The given reaction is of complete combustion of propane in presence of oxygen.

Molecular formula of propane gas= [tex]C_{3} H_{8}[/tex]

Combustion is a oxidation of a organic molecule into carbon dioxide and water .

Here oxygen serves as a oxidizing agent and oxidizes propane into carbo dioxide and water molecule.

The unbalanced reaction can be given as:

[tex]C_{3} H_{8} +O_{2}[/tex] →[tex]CO_{2} +H_{2} O[/tex]

Here, 3 carbons are there in propane.

so, 3 carbon dioxide molecules are formed to balance the reaction.

So, when 3 carbon dioxides are formed 3 oxygen molecules also needed.

Due to presence of 8 hydrogen in propane 4 water molecules forms , which contains 4 O means 2 oxygen molecules .

There for, total 5 molecules of oxygen are needed to balance the equation.

The final balanced equation can be given as..

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

Learn more about combustion here...

https://brainly.com/question/23992512

#SPJ10

The mass of NaCl that can be produced from 9.8 moles of HCl is 572.712 g

2Na + 2HCl --> 2NaCl + H₂

From the balanced equation above,

2 moles of HCl reacted to produced 2 moles of NaCl.

Therefore,

9.8 moles of HCl will also react to produce 9.8 moles of NaCl

Mass = mole × molar mass

Mass of NaCl = 9.8 × 58.44

Mass of NaCl = 572.712 g

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

Answer:

17.25g

Explanation:

From our question, we have been asked to find the mass of water present.

The formula for finding specific heat is given by;

Q = mCp∆T

We have, Q = 0.507 J, ∆T = 0.007° C and we know that Cp of water is 4.2 J/g°C

Rearrange the formula making m the subject.

Which is given by;

m = (Q)/(Cp∆T)

Substituting for the known values

[tex]m \: = \frac{0.507}{4.2 \times 0.007}[/tex]

= 17.24489 g

= 17.25g

Answer:

17.32 gm

Explanation:

Specific heat of water is 4.182 J / g- c

4.182  J /g-c   =  .507/ ( .007 * gm)

solve for gm = 17.32  gm

The volume of the solution in mL needed to deliver 0.078 moles of glucose to the patient is 250mL.

The volume of a solution can be calculated by using the following formula:

Molarity = n/V

Where;

According to this question, an intravenous solution is noted as having a concentration of glucose equal to 0.312 M. The volume that will be needed is as follows:

volume = 0.078 moles ÷ 0.312M

volume = 0.25L = 250mL

Therefore, the volume of the solution in mL needed to deliver 0.078 moles of glucose to the patient is 250mL.

Learn more about volume at: https://brainly.com/question/20714769

#SPJ1

The energy of the snack in calories per gram is 9983.3 Calories/gram.

The energy that is contained in a snack is obtained from a calorimeter when the snack is burnt in a calorimeter. The mass of the snack that is burnt is measured in terms of energy output of the calorimeter.

If  1 calorie = 4.18J

x calorie = 41,800 J

x = 41,800 J * 1 calorie/4.18J

x = 9983.3 Calories/gram

Learn ore about energy in food:https://brainly.com/question/9602807

#SPJ1

Answer:

12.9 g O₂

Explanation:

To find the mass of oxygen gas produced, you need to (1) convert grams KClO₃ to moles KClO₃ (via molar mass from periodic table values), then (2) convert moles KClO₃ to moles O₂ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles O₂ to grams O₂ (via molar mass). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 3 sig figs to match the given value (33.0 g).

Molar Mass (KClO₃): 39.098 g/mol + 35.45 g/mol + 3(15.998 g/mol)

Molar Mass (KClO₃): 122.542 g/mol

2 KClO₃ ---> 2 KCl + 3 O₂

Molar Mass (O₂): 2(15.998 g/mol)

Molar Mass (O₂): 31.996 g/mol

33.0 g KClO₃           1 mole                 3 moles O₂            31.996 g
--------------------  x  -------------------  x  -----------------------  x  ------------------  =
                               122.542 g          2 moles KClO₃            1 mole

=  12.9 g O₂

The approximate partial pressure of oxygen at 1500 m is 0.18 atm.

From barometric pressure table;

1500 m = 85 kPa

1 kPa = 0.0099 atm

85 kPa = ?

= 0.84 atm

Oxygen percentage in air  = 21%

P = 0.21 x P(total)

P = 0.21 x 0.84 atm

P = 0.18 atm

Thus, the approximate partial pressure of oxygen at 1500 m is 0.18 atm.

Learn more about partial pressure here: https://brainly.com/question/19813237

#SPJ11

Answer:

chemical because it turned into a new compound

Explanation:

is zinc and hydrogen chloride combining into zinc chloride and hydrogen gas a chemical or physical change?​

physical change is like  boiling, melting, freezing, and shredding

but its still the same compound

chemical is like it turns into something else like a new compound

Zn + 2HCl = ZnCl2 + H2(g)

Metal + Acid → Hydrogen + Acid Anion

new compound forms in this reaction

quora

Les McLean

toppr

Answer:

The name of this molecule structure is 1-Butyne

The name of the given molecule according to IUPAC is 1-Butyne. Thus, option C is correct.

The IUPAC nomenclature is given as the standard naming technique that is used to name a chemical compound. It is named with the following main rules.

The triple bond compound is an alkyne with the suffix -yne. The development of the name to the given structure is therefore given by counting the number of carbon atoms, and the location of the triple bond.

There are 4 carbon atoms in the structure with the triple bond at carbon 1, therefore the name will be 1-Butyne. Hence, option C is correct.

Learn more about IUPAC nomenclature, here:

https://brainly.com/question/11587934

#SPJ1

Answer: A

Explanation:

9 protons correspond to fluorine.

The mass of NO produced is 9.3 g; option D.

The mass of nitrogen (ii) oxide, NO, produced from the reaction is determined from the mole ratio of the reaction.

The mole ratio of ammonia to oxygen from the equation of the reaction is 4 : 5.

moles of oxygen = 11.8/32 = 0.368

moles of ammonia = 8.3/17 = 0.488

Oxygen is the limiting reactant.

Mass of NO produced = 0.369 * 4/5 * 30 = 9.4 g NO

In conclusion, approximately 9.3 g of NO is produced.

Learn more mole ratio at: https://brainly.com/question/19099163

#SPJ1

Answer:

Option D

Explanation:

sour taste refers to acid hence B is wrong

Bases have pH higher than 7 so D is the correct answer

Answer:

Slippery, high pH, and caustic

(last option listed)

Explanation:

sour taste - acid feature

pH < 7 - acid feature [low pH]

dissolves metal - strong acid feature

bitter taste - base feature

slippery feel - base feature

pH > 7 - base feature [high pH]

dissolves metal - strong base feature

[essentially, traits of base can be described as opposites of acid traits]

So, if you combine these traits, "Slippery, high pH, and caustic" best describes characteristics of a base

The molecules of the green food coloring would disperse throughout the water.

i) In a few hours, the molecules of the green food coloring would have started dispersing throughout the water from the region of higher concentration to the region of lower concentration.

ii) In several days, the molecules would have uniformly dispersed through the water.

b) According to the kinetic theory of particles, matters, irrespective of their nature, are made up of small molecules that are in constant random motion. The direction and pace of movement depend on the energy they possess as well as the kind of relationship that exists between the small molecules.

c)The process that takes place in the experiment is known as diffusion.

More on diffusion can be found here:

#SPJ1

So, the formula mass of nitroglycerin is[tex]3(12.011)+5(1.00794)+3(14.0007)+9(15.9994)=227.0694 \text{ g/mol}}[/tex]

Therefore, the percent error is

[tex]\frac{193.7-227.0694}{227.0694} \times 100=\boxed{-14.70 \% \text{ (to 4 sf)}}[/tex]

Answer:

27.50 g

Explanation:

Unless weight was somehow gained/lost during the reaction, the products should weigh as much as the reactants. Since this isn't specified the mass of the reactants should be equal to the mass of the products.

From the coefficients of the equation, we know that for every 3 moles of water consumed, 1 mole of diphosphorus trioxide is consumed.

This means we need to find the mass of 0.75 moles of diphosphorus trioxide.

So, the formula mass of diphosphorus trioxide is:

Thus, 0.75 moles have a mass of:

Answer:

2.67 N

Explanation:

The normality equation looks like this:

Normality = Molarity (M) x Number of Equivalents

In this formula, the number of equivalents represents how many moles of the acidic species exist in the molecule. In other words, how many hydrogen atoms are in citric acid? This value would be 8 equivalents (as denoted by the subscript).

So, to find the normality, you need to (1) convert grams C₆H₈O₇ to moles (via molar mass), then (2) calculate the molarity (via molarity equation using moles and volume), and then (3) calculate normality (via normality equation using molarity and # of eq.).

(Step 1)

Molar Mass (C₆H₈O₇): 6(12.011 g/mol) + 8(1.008 g/mol) + 7 (15.998 g/mol)

Molar Mass  (C₆H₈O₇): 192.116 g/mol

128 g C₆H₈O₇             1 mole
----------------------  x  ----------------------  =  0.666 moles C₆H₈O₇
                                   192.116 g

(Step 2)

Molarity = moles / volume (L)

Molarity = 0.666 moles C₆H₈O₇ / 2 L H₂O

Molarity = 0.333 M

(Step 3)

C₆H₈O₇  -----> 8 hydrogen atoms

Normality = molarity x number of equivalents

Normality = 0.333 M x 8

Normality = 2.67 N

Explanation:

Answer:

Mendeleev left blank spaces in his version of the periodic table because he left the gaps to place elements not known at the time

how are we (brainly users) supposed to know. unless its just me that doesn't know.

sorry that this isn't really much help. :/

It is a tension created by the attraction of molecules to the surface by the molecules in a bulk of a solution.

The attraction force present between water molecules is cohesion force.

The phenomenon of surface tension provides two major characteristics to the water:

Plants take water from soil using it's roots , and water is travelling through the xylene tissues present in a plant , so the cohesion forces present in water helps it to travel to the higher places in plants.

While in case of animals, this attraction forces increases the surface density which helps to insects to walk on to the water surface.

Learn more about surface tension here...

https://brainly.com/question/277477

#SPJ10