The youngest age that this person can be and legally operate a boat powered by a motor of more than 35 hp will be 12 years of age.
What is electric power?It is the rate of the electric work done. Its unit is the watt. Horsepower is the unit of power.
A person under the age of 12 may only legally operate a boat with a motor that has more than 6 horsepower but no more than 35 horsepower
if they meet two requirements: they have a boating safety certificate, which they must have on board; and they are being closely watched by an adult who is at least 16 years old.
Hence the youngest age that this person can be and legally operate a boat powered by a motor of more than 35 hp will be 12 years of age.
To learn more about electric power refer to the link;
https://brainly.com/question/12316834?referrer=searchResults
#SPJ1
When the sun runs out of hydrogen in its core, it will become larger and more luminous because:.
Answer:
Because the size of the star has expanded, the surface cools down and goes from white-hot to red-hot. Because the star is brighter, redder and physically larger than before, we dub these stars "red giants"
suggest why it is better to use light gates and a computer than to use a stopwatch and a ruler to measure the speed of a toy car
Answer:
light gates are more reliable
Explanation:
when using a manual stop watch it's difficult to stop it at an exact time. light gates able to detect when an object passes through a 'gate' with the infrared transmitter and receiver. (sorry for my explanation)
B
Which actions most likely cause the domains within a material to lose their alignment and become more
randomized? Check all that apply.
heating the material
Orubbing the material against a magnet
O passing electricity around the material
O placing the material in a magnetic field of opposite polarity
O placing the material near a strong magnet
O hitting the material
Mark this and return
Next
Submit
Answer: 2, 3, and 5
Explanation:
What is the kinetic energy of a 12 kg ball moving at a speed of 15 m/s?
Answer:
1350 N
Explanation:
KE = ½mv²
KE = ½(12)(15²)
KE = 1350 N
An empty container has a mass of 62.000 grams. You fill it with 24.6 mL of a liquid. The final mass of the container is 81.34 grams. What is the density of the liquid to the correct number of significant figures?
density = mass / volume
mass = 81.34 - 62
= 19.34 g
volume = 24.6 ml
density = 0.786 g/ml
Name and Title:
Include your name, instructor's name, date, and name of lab.
Objectives(s):
In your own words, what is the purpose of this lab?
Hypothesis:
In this section, please include the predictions you developed during your lab activity. These statements reflect your predicted outcomes for the experiment.
Procedure:
The materials and procedures are listed in your virtual lab. You do not need to repeat them here. However, you should note if you experienced any errors or other factors that might affect your outcome. Using your summary questions at the end of your virtual lab activity, please clearly define the dependent and independent variables of the experiment.
Data:
Record the elements present in each unknown astronomical object. Be sure to indicate “yes” or “no” for each element.
Hydrogen Helium Lithium Sodium Carbon Nitrogen
Moon One
Moon Two
Planet One
Planet Two
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results. Please answer all questions in complete sentences using your own words.
Using two to three sentences, summarize what you investigated and observed in this lab.
Astronomers use a wide variety of technology to explore space and the electromagnetic spectrum; why do you believe it is essential to use many types of equipment when studying space?
If carbon was the most common element found in the moons and planets, what element is missing that would make them similar to Earth? Explain why. (Hint: Think about the carbon cycle.)
We know that the electromagnetic spectrum uses wavelengths and frequencies to determine a lot about outer space. How does it help us find out the make-up of stars?
Why might it be useful to determine the elements that a planet or moon is made up of?
The variable that is altered by the independent variable is called the dependent variable. the spectrum given out by the hypothetical unknown celestial object.
Name : Christopher Andre
Instructor name : Albert brown
Name of the lab : ELS Laboratory
The term electromagnetic spectrum refers to the range of electromagnetic radiation's frequencies, as well as the wavelengths and photon energies connected to each frequency.
By analyzing the absorption spectra of the planets and moons, the electromagnetic spectrum experiment seeks to identify the components that make up their atmospheres.
From below one hertz to over 1025 hertz, electromagnetic waves are included in the electromagnetic spectrum.
The wavelengths that correlate to the frequency range from tens of thousands of kilometers to a small portion of the size of an atomic nucleus.
Starting at the low frequency (long wavelength) end of the spectrum, each frequency band's electromagnetic waves are referred to by a variety of names.
Hence the dependent variable is the one that changes as a result of the independent variable.
Learn more about electromagnetic spectrum here
https://brainly.com/question/13803241
#SPJ10
A copper block rests 30.0 cm from the center of a steel turntable. The coefficient of static friction between the block and the surface is 0.53. The turntable starts from rest and rotates with a constant angular acceleration of 0.50 rad/s2. After what time interval will the block start to slip on the turntable?
pls explain the question briefly
Answer:
refer to the above attachment
(a) that the acceleration (A) will have no components that are identically zero. (B) may have some components that are identically zero. (C) will have only a z component that is identically zero. (D) will have an identically zero z component, and maybe an identically zero component in the x or y directio
Answer:
D.
Explanation:
acceleration in the z component = velocity in z component / time. The question states velocity in z component is zero. Therefore, acceleration in z component = 0/time = 0.
Now the question does not specify whether the other velocity vectors (x or y) is zero or not. So its D.
You pushes a 25kg box with 40 N of force, but the friction on the crate is 15 N. What is the net
force?
Answer:
25 N in the direction of your push
Explanation:
The friction force acts against your pushing force....it reduces the net amount of force you are exerting
Net force = 40 - 15 = 25 N
Kory was on the porch when a loud sound caught his attention. Looking up, he saw a red car spinning across the intersection and a white car stopped in the intersection. He knew the typical sequence of events for a car collision involved two vehicles moving at speed. As he tried to make sense of the scene, he filled in missing details that he had not actually observed. This will likely result in:
The information illustrates that this will likely result in schema distortion.
What is schema?It should be noted that schema simply means a mental model of an object that includes knowledge, beliefs, and expectations.
In this case, the information illustrates that this will likely result in schema distortion. This led to the missing details.
Learn more about schema on:
brainly.com/question/1463533
#SPJ12
A crate hangs from a ring at the middle of a rope, as the drawing illustrates. a person is pulling on the right end of the rope to keep the crate in equilibrium. can the rope ever be made to be perfectly horizontal
Answer:
No
Explanation:
In order for the rope to be perfectly horizontal, there must be a vertical component in tension
When is a secondary source more helpful than a primary source?
A. When you want to know the exact data values
B. When you do not need to know the conclusion of the experiment
C. When you do not need many details about the experiment
D. When you are an expert in the field being studied in the experiment
Answer:
I think the answer is C.
Explanation:
A primary source is a first hand account of an event while a secondary source is a retelling or second hand account meaning as many details will be prevalent.
Anita knows that she is one of the best basketball players on her team. Several colleges have been interested in recruiting her. One has offered her the opportunity to work with a specialist in biometrics once she joins the team. Anita does not think that this is really necessary since she is already a very skilled athlete. What is the BEST advice to give Anita?
A.
If everyone else on the team is doing it, she probably should too.
B.
Even the most skilled athletes can benefit from attention to biometrics.
C.
Using biometrics will help with her overall fitness but probably not her game.
D.
She probably already has all of the necessary skills since colleges are scouting her.
Anita has to pay attention to biometrics since even the most accomplished athletes may benefit from it.Option B is correct.
What is biometrics?Biometrics is the measurement of physiological traits that may be used to identify a person, including but not limited to fingerprint, iris pattern, and face features.
Anita is aware that she is one of her team's top basketball players. She has drawn interest from several colleges.
One has offered her the chance to collaborate with a biometrics expert once she joins the company. Since she is already a very accomplished athlete.
Anita does not believe that this is truly essential. The best piece of advice I can give Anita is to pay attention to biometrics since even the most accomplished athletes may benefit from it.
Hence,option B is correct.
To learn more about the biometrics refer;
https://brainly.com/question/20318111
#SPJ1
To reach a distance of 2 km, a car has to cover a path of 2.4 km in 10 minutes. Calculate its average speed and velocity
Answer:
Average speed = 0.24 km/min.
Average velocity = 0.2 km/min.
Explanation:
Finding average velocity :
Least possible distance / Time taken2 km / 10 min0.2 km/min.Finding average speed :
Path distance / Time taken2.4 km / 10 min0.24 km/min.The human nerve cells have a net negative charge and the material in the interior of the cell is a good conductor. if the cell has a net charge of - 7.85 pc, what are the magnitude and direction (inward or outward) of the net flux through the cell boundary
The magnitude and direction (inward or outward) of the net flux through the cell boundary is - 0.887 wb.m².
What is flux?
Flux describes any effect that appears to pass or travel through a surface or substance.
The magnitude and direction (inward or outward) of the net flux through the cell boundary is calculated as follows;
Ф = Q/ε
where;
Q is net chargeε is permittivity of free spaceΦ = (-7.85 x 10⁻¹²)/(8.85 x 10⁻¹²)
Φ = - 0.887 wb.m²
Learn more about flux here: https://brainly.com/question/10736183
#SPJ1
If a drag racing motorcyclist has an initial speed of 10 m/s, and then he/she
accelerates for 15 seconds at 15 m/s2, what is the velocity after 15 seconds?
O 30 m/s
O235 m/s
O225 m/s
Answer:
235 m/s
Explanation:
v = u + at
where v = final speed,
u = initial speed (10 m/s),
a = acceleration (15 m/s²),
t = time taken (15 s).
Substituting into the formula:
v = 10 + (15 x 15)
v = 10 + 225
v = 235 m/s
If the slowest instruction in the SCA executes in 12.5 ns, then what is maximum system clock frequency in MHz
Since the slowest instruction in the SCA executes in 12.5 ns, the maximum system clock frequency is 80 MHz
To answer the question, we need to know what frequency is.
What is frequency?Frequency is the number of oscillations per second of a wave.
It is given by f = 1/T where T = period of wave
Now, given that the slowest instruction in the SCA executes in t = 12.5 ns, we need to calculate maximum system clock frequency, f.
What is the maximum system clock frequency?So, f = 1/t
= 1/12.5 ns
= 1/(12.5 × 10⁻⁹ s)
= 1/12.5 × 10⁹ Hz
= 0.08 × 10⁹ Hz
= 80 × 10⁻³ × 10⁹ Hz
= 80 × 10⁶ Hz
= 80 MHz
So, the maximum system clock frequency is 80 MHz
Learn more about maximum system clock frequency here:
https://brainly.com/question/14636488
#SPJ11
How are step-up transformers used in the transmission of electrical energy?
How are step-up transformers used in the transmission of electrical energy?
They increase the voltage for efficient long-distance transmission.
They decrease the voltage before it leaves a power plant.
They increase the current for efficient long-distance transmission.
They increase the voltage and the current for a short-distance transmission.
The step-up transformers are used in the transmission of electrical energy in the way they increase the voltage for efficient long-distance transmission.
What is transformer?
A transformer transfers electric energy from one AC circuit to one or more other circuits, either stepping up or stepping down the voltage.
In step up transformers, the voltage are increased from low to high. Step ups are used of long distance transmission In step down transformers, the voltage is decreased from high to low based on the purpose.
Thus, they increase the voltage for efficient long-distance transmission.
Learn more about transformer.
https://brainly.com/question/15200241
#SPJ1
A 50-kg block is at rest on a 15o slope. A force of 250 N is acting on the block up the slope parallel to it. If the block does not slide up the slope, what is the minimum value of the coefficient of static friction between the block and the slope
The minimum value of the coefficient of static friction between the block and the slope is 0.53.
Minimum coefficient of static frictionApply Newton's second law of motion;
F - μFs = 0
μFs = F
where;
μ is coefficient of static frictionFs is frictional forceF is applied forceμ = F/Fs
μ = F/(mgcosθ)
μ = (250)/(50 x 9.8 x cos15)
μ = 0.53
Thus, the minimum value of the coefficient of static friction between the block and the slope is 0.53.
Learn more about coefficient of friction here: https://brainly.com/question/20241845
#SPJ1
5. On a hot summer day the grass feels cooler than the sidewalk, because
O
O
the grass has a higher specific heat
the grass has a smaller surface area
the sidewalk is at a higher temperature
Answer:
because the side walk is at high temperature
We have an Atwood device, two blocks connect by a string strung over a pulley, but the twist this time is that both blocks are on perfectly smooth inclines. The upper block is on an incline 15 degrees to the horizontal and has a mass of 7kg. The lower block is on an incline of 65 degrees to the horizontal and has a mass of 11kg. Find the acceleration of the system?
The Acceleration of the system is 6.41 m/s².
Given,
α= 15°, m₁ = 7kg
β= 65°, m₂ = 11 kg
Let, a be the acceleration and T is the tensions at the end it's the cord.
Let, the mass m₂ be coming down along the inclined plane along the inclined surface towards downward m₂g sin β and the tension in the upward direction,
Resultant force, m₂a=m₂g sin β -T
11a=((11) ×g sin 65°) -T ...(i)
Now, considering the motion of m₁ which moves downwards, the forces are m₁g sinα, and T both are acting downwards.
Resultant force m₁a = m₁g sin α+T
7a =7g sin 15°+T ...(ii)
Solving both the equations by adding them,
18a=11gsin 65°+7g sin 15°-T+T
18a=11gsin 65°+7g sin 15°=115.45
a=115.45/18=6.41 m/s²
Hence, the Acceleration of the system is 6.41 m/s².
Learn more about the acceleration here:
https://brainly.com/question/22048837
#SPJ10
A projectile is launched at an angle of 29 degrees above the horizontal with an initial velocity of 36.6 at an unknown height.
The magnitude of the vertical velocity upon returning to its original, unknown height is _____ m/s.
The magnitude of the unknown height of the projectile is determined as 16.1 m.
Magnitude of the height
The magnitude of the height of the projectile is calculated as follows;
H = u²sin²θ/2g
H = (36.6² x (sin 29)²)/(2 x 9.8)
H = 16.1 m
Thus, the magnitude of the unknown height of the projectile is determined as 16.1 m.
Learn more about height here: https://brainly.com/question/1739912
#SPJ1
Find the work done by a weightlifter lifting a 20kg barbell 2.2 m upward at a constant speed.
Answer:
440J
Explanation:
First, let us find the weight of the barbell.
The formula to find the weight is :
W = m × g
Here,
m ⇒ mass ⇒ 20 kg
g ⇒ acceleration of gravity
Let us find it now.
W = m × g
W = 20 kg × 10 ms⁻²
W = 200N
And now let us find the work done by this weight lifter.
Work = Force × Displacement
Let us find it now.
Work = Force × Displacement
= 200N × 2.2m
= 440J
True or false? ultrasonic cleaners are based on the same principle as echolocation in bats and some other animals.
The given statement is true ultrasonic cleaners are based on the same principle as echolocation in bats and some other animals.
What is echolocation?A physiological method for identifying far-off or unseen items (like prey) using sound waves that the objects reflect back to the source, such as a bat.
High-frequency sound waves are used in ultrasonic cleaning to scour clean objects that are submerged using liquid as a medium.
The cavitation of the solution's molecules is brought on by the high-frequency sound waves, which are generally 40 kHz in frequency.
Although bats have developed an advanced kind of echolocation that allows them to travel and find food in the dark, they have vision that is comparable to that of humans.
Bats use high frequency sound pulses emitted through their mouth or nose and listen for the echoes to achieve echolocation.
It is accurate to say that ultrasonic cleaners work on the same principles as creatures like bats and certain others that use echolocation.
Hence the given statement is true.
To learn more about echolocation refer;
https://brainly.com/question/7828418
#SPJ1
Answer the following questions clearly and thoughtfully.
1. If you were governor of your state...
A. What are two things you would do to protect wetlands? (2 points)
B. What are three important things wetlands can do that make them worth
protecting? (3 points)
I need help
A) Formulate policies to protect wetlands and ensure that the policies are enforced.
B) Wetlands hold important biodiversity. They are a source of foods, medicines, and raw materials. They help with stabilizing the climate.
WetlandsAs a governor of my state, the two most important steps to protect wetlands include:
Formulate relevant policies through consultation with different stakeholdersEnsure that the policies are enforced. Wetlands are homes to many important plant, animal, and microbe species. Some of these species serve as foods, raw materials, and medicines for humans and their livestock.Wetlands help sequestrate carbon dioxide and as such, help with the regulation of climate.More on wetlands can be found here: https://brainly.com/question/11438518
#SPJ1
To protect the wetlands, I will ensure a strict enforcement of all existing state laws on the conservation of wetlands.
What are wetlands?The wetlands are those areas that consists of marshes and swamps. They are of great important to the ecosystem and biodiversity.
a) The two things that I will do to protect wetlands are;
I will ensure that the areas that drain into the wetlands are kept clean from contaminants such as pesticides and other chemicals.I will ensure a strict enforcement of all existing state laws on the conservation of wetlands.b) Wetlands are very important because;
They are very important in erosion controlThey help to preserve biodiversityThey are important components of the biogeochemical cycles of water, nitrogen and sulfur.Learn more about wetlands:https://brainly.com/question/11438518
#SPJ1
What are the effects of gravity on earth?
Answer:
Without it, we could not survive on Earth. Earth orbits the sun due to the gravity of the sun, which maintains us at a convenient distance from it to enjoy the sun's warmth and light. It keeps the air we need to breathe and our atmosphere in place. Our planet is held together by gravity.
which process produces the energy that powers a solar calculater
Nuclear fusion is the process which produces the energy that powers a solar calculator.
What is Nuclear fusion?
This process involves the fusion of hydrogen atoms to form helium with accompanying release of heat energy.
The heat energy is what powers the solar calculator thereby making it the most appropriate choice.
Read more about Nuclear fusion here https://brainly.com/question/982293
#SPJ1
Which part of the curve shows:
a. acceleration
b. zero acceleration
c. deceleration
d. zero velocity
Answer / Explanation:
acceleration is essentially increasing in velocity. [acceleration is literally velocity over time]
So, we can see acceleration on this velocity/time graph (the y-axis is representative of velocity).
Meaning that...
When we increase in velocity, that is acceleration. [A]
When we stay at the same velocity, that is zero acceleration. [B]
> (we are not increasing {acceleration} or decreasing {deceleration} in velocity/ acceleration over time)
When we decrease in velocity, that is deceleration. [C]
When we have no velocity (velocity = 0), that is zero velocity. [D]
So, this curve is already in order of A-B-C-D.
(origin/0 to A = acceleration)
(A to B = zero acceleration)
(B to C = deceleration)
(C to S = zero velocity)
hope this helps!!
Answer:
O - A : acceleration
A - B : zero acceleration
B - C : deceleration
C - S : zero velocity
Explanation:
acceleration is velocity over time, meaning that the slope of the graph is showing acceleration
The speed of light is a constant and approximately equal to 300,000,000 meters per second.
Green lasers emit light at a wavelength of 532 nm. However, the material that is used to make most green lasers does not emit light at 532 nm. Instead, it emits light at a different wavelength, and the laser then uses a “frequency doubler.” This doubles the frequency of the emitted light, and the resultant light is the green 532 nm that we observe.
1 meter is equal to 1,000,000,000 nanometers.
What is the output light frequency of the material used before doubling?
The material used before doubling will produce light at a frequency of 0.056 Hz.
What is the frequency?The number of times a wave occurs repeatedly in a second is known as frequency.
The formula provides the frequency as,
[tex]\rm v = \lambda \times f \\\\\ \rm f = \frac{v}{\lambda} \\\\ \rm f = \frac{3 \times 10^8}{532 \times 10^-9} \\\\ \rm f = 3 \times 10^{12} \\\\ f= 0.056 \ Hz[/tex]
Therefore, the material used before doubling will have an output light frequency of 0.056 Hz.
To learn more about the frequency refer to:
https://brainly.com/question/14926605
#SPJ1
A brass measuring tape is correct at 20°C. The value obtained when the length of a field is measured with the rule at 50°C appears to be 70.5 m. What is the true length of the field? Linear expansivity of brass = 1.8 x 10-5 K-1,
Answer:
A 2kg block is moved a long a level floor by a horizontal force of 20N if the coefficient of sliding friction is 0.4
what is the acceleration of the blove
