If the both pressure and temperature of the helium gas is doubled, the final volume is 1.00 Liters.
What is the final volume of the helium gas?Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.
It is expressed as;
P₁V₁/T₁ = P₂V₂/T₂
Given that;
Initial volume V₁ = 1.00LInitial Pressure = PInitial temperature = TFinal pressure = 2PFinal temperature = 2TFinal volume V₂ = ?P₁V₁/T₁ = P₂V₂/T₂
P₁V₁T₂ = P₂V₂T₁
V₂ = P₁V₁T₂ / P₂T₁
V₂ = ( P × 1.00L × 2T ) / ( 2P × T )
V₂ = ( 2.00L × P × T ) / ( 2 × P × T )
V₂ = ( 1.00L × P × T ) / ( × P × T )
V₂ = 1.00L
If the both pressure and temperature of the helium gas is doubled, the final volume is 1.00 Liters.
Learn more about the combined gas law here: brainly.com/question/25944795
#SPJ11
A scuba diver uses compressed air to breath under water. He starts with an air volume of 3.20 L at sea level (1 atm) at a temperature of 30°C. What is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C?
2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Given data:
[tex]P_1=1 atm[/tex]
[tex]V_1=3.20 L[/tex]
[tex]T_1[/tex]=30°C
[tex]P_2=3 atm[/tex]
[tex]V_2=?[/tex]
[tex]T_2=24°C[/tex]
Using the equation:
[tex]\frac{P_1V_1}{T_1}[/tex] =[tex]\frac{P_2V_2}{T_2}[/tex]
[tex]V_2[/tex] =(1 atm x 3.20 L x 24°C) ÷ 30°C
[tex]V_2[/tex] = 2.56 L
Hence, 2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
Learn more about the ideal gas here:
https://brainly.com/question/27691721
#SPJ1
Specialized periodicals in which scientists publish the results of their works are called
Specialized periodicals in which scientists publish the results of their works are called scientific journals.
In educational publishing, a scientific journal is a periodical book intended to similarly the progress of technology, typically by way of reporting new studies.
Journal articles may include original research, re-analyses of studies, opinions of literature in a selected place, proposals of new but untested theories, or opinion pieces.
These scientific journals include the following.
original articles, case reports, technical notes, pictorial essays, reviews, commentaries editorials.Learn more about scientific journals here https://brainly.com/question/14443228
#SPJ10
7.0 mol Mn reacts with 5.0 mol
O2 according to the equation below:
2Mn + O₂ → 2MnO
How many moles of MnO form from
5.0 mol Mn?
[?] mol MnO
Round your answer to the tenths place.
5 moles of MnO form from 5.0 mol Mn. Details about stoichiometry can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows:
According to this question, the following chemical equation is given as follows:
2Mn + O₂ → 2MnO
2 moles of Mn forms 2 moles of MnO
Hence, 5 moles of Mn will form 5 × 2/2 = 5 moles of MnO.
Therefore, 5 moles of MnO form from 5.0 mol Mn.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
Answer: 10.0
Explanation: i took the test
Which shows an isomer of the molecule below?
Answer: C
Explanation:
A) There is 1 fewer hydrogen atom.
B) There are 2 fewer carbon atoms.
D) There is 1 extra hydrogen atom.
Heat _____.
can only betransferredif molecules are touching
is always created by friction
is a type of potential energy
is the same as temperature
how do we compare the PH of a weak acid and a strong acid of identical concentration and draw a conclusion about the concentration of hydrogen ions?
Answer:
This means that the pH values of strong acids are lower than that of weak acids, which explains why the rate of reaction of strong acids with substances (such as metals, metal carbonates etc) is higher than that of weak acids.
Explanation:
welcome
Ammonia gas occupies a volume of 450. mL at a pressure of 720. mm Hg. What volume will it occupy at standard pressure?
Show your work Please!!!!
When methane, CH4, is combusted, it produces carbon dioxide, CO₂, according to the unbalanced equation: CH4 +0₂ - CO₂ + H₂O.
Write the balanced equation for this reaction, and explain how it is possible for 10 grams of methane fuel to burn and emit 27 grams of carbon dioxide. Discuss whether or not this reaction obeys the law
of conservation of mass. (5 points)
The balanced equation will be [tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
Stoichiometric problemsThe balanced equation of the reaction would be as follows:
[tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
The mole ratio of methane to carbon dioxide is 1:1.
10 grams of methane will give 10/16 = 0.625 moles
0.625 moles of carbon dioxide would give 0.625 x 44.01 = 27.506 grams.
Thus, 10 grams of methane will produce approximately 27 grams of carbon dioxide stoichiometrically.
The reaction obeys the law of conservation of mass because the atoms of all the elements before and after the reaction are balanced.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
How many milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda? Show your work.
225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
How to calculate volume?The volume of a substance can be calculated using the following formula:
molarity = no of moles ÷ volume
no of moles of baking soda (NaHCO3) = mass ÷ molar mass
Molar mass of baking soda = 84.007g/mol
no of moles = 15g ÷ 84.007g/mol = 0.18mol
0.8 = 0.18/volume
volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at: https://brainly.com/question/1578538
#SPJ1
225 millilitres of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Define molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Volume of solution in litre}[/tex]
[tex]Moles of baking soda (NaHCO_3) =\frac{mass}{molar \;mass}[/tex]
Molar mass of baking soda = 84.007g/mol
[tex]Moles of baking soda (NaHCO_3) =\frac{15g}{84.007g/mol}[/tex]
[tex]Moles of baking soda (NaHCO_3) = 0.18mol[/tex]
Now, calculating volume with the molarity formula:
Molality = [tex]\frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]
0.8 = [tex]\frac{0.18 }{Volume \;of \;solution \;in \;litre}[/tex]
Volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at:
brainly.com/question/1578538
#SPJ1
Se prepara 0,150dm3 de solucion poh=11,20 a partir de 10,00cm3 de una solucion acuosa de hno3 (( m=63,0g/mol). la concentracion de la solucion concentrada expresada en %m/v es?
Answer:
Translate your language to English ok
When producing a soluble salt in a reaction between an acid and an alkali, how can you prepare dry solid crystals from the solutions
1)evaporation/crystallization
2)filtration
3)condensation
4)nuetralisation
Explanation:
Making a salt from an alkali
If you are using an alkali - which is a soluble base - then you need to add just enough acid to make a neutral solution (check a small sample with universal indicator paper).
Warm the salt solution to evaporate the water. You get larger crystals if you evaporate the water slowly.
The density of water is 1 g/cm3. brent used the following method to convert 1 g/cm3 to kg/m3.
(1 kg = 1,000 g and 1 m = 100 cm)
what is the error in brent's conversion method?
a - 1 kg should be written as 1 g.
b - (1 m)3 should be written as (1 cm)3.
c - 1,000 kg should be written as 1,000 g.
d - (100 cm)3 should be written as (100 m)3.
Answer:
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Explanation: hope this help.
Answer:
c - 1,000 kg should be written as 1,000 g.
Explanation:
got it correct on the test.
4
25.0 mL of a 0.625 M solution are diluted to a total volume of 100 mL. What is
the molarity of the new solution? (Report your answer to three places past the
decimal point. Moodle is looking for a number only, no units.)
Answer:
.156 M
Explanation:
diluting 25 to 100 cuts the M to 1/4 of the original
1/4 * .625 = .15625
●
As a solution becomes more basic or alkaline, how does it affect the concentration of
H3O* and OH ions?
Only certified electricians are allowed to work on facility electrical system?
Find the ratio of the volume divided by the
temperature for the first data pair. Use significant
figures.
V/T=0.72/276= 0.002 ✓
COMPLETE
Now do the same computation for all six pairs of
values. What is the average of all six fractions V/
T?
From the pair of values given, the ratio of the volume to the temperature for the first data pair is, 0.0026 cm³/K
What is a Ratio?A ratio is a comparison between two quantities showing how much one quantity differs from another.
From the data given, the first data pair is as follows ;
Temperature = 276 KVolume = 0.72 cm³Ratio of volume to temperature = volume / temperature
Ratio = 0.72 / 276
Ratio = 0.002608 cm³/K
The significant figure's rule for division is the least number of significant figures used in the operation.
The least significant figure of the values given is 2.
Therefore, the ratio of the volume to the temperature for the first data pair is 0.0026 cm³/K
Learn more about ratio here :
brainly.com/question/25927869
#SPJ1
Answer:
0.0026
Explanation:
edge 2022 it's the same answer for both parts
Justify that the shielding effect of an atom remain constant in a period but atomic size gradually gets smaller (chemistry)
Atomic size decreases across a period because but the positive charge of the nucleus gets increases across a period.
What is the shielding effect?The shielding effect is the shielding from the pulling force of the positively-charged nucleus given to. the outermost shell electrons by the inner electrons.
Since the shielding effect remains constant across a group but the positive charge of the nucleus gets bigger, atomic size decreases across a period.
Learn more about shielding effect at: https://brainly.com/question/19068425
#SPJ1
An educated guess which explains observations is called:
a a law
b an experiment
c a hypothesis
d a variable
Answer:
c. a hypothesis is the correct answer
Explanation:
What is the change in freezing
point, ATf, when the 0.195 m
aqueous solution of K2S dissolves
into 3 particles?
The change in the freezing point of the solution is 1.1°C.
What is freezing point depression?The freezing point depression is a colligative property thus we must take note of the number of particles in solution.
Using;
ΔT = k m i
k = 1.86 °C/m
m = 0.195 m
i = 3
ΔT = 1.86 °C/m * 0.195 m * 3
ΔT = 1.1°C
Learn kore about freezing point:https://brainly.com/question/3121416
#SPJ1
Answer:
1.0881
Explanation:
Correct answer for Acellus
Suppose you add a cup of sugar to hot water and all of the sugar dissolves. then the water cools and some of the sugar is seen as a solid on the bottom of the beaker. explain why this happened.
Answer:
its becuz the water is not capable to disolve all the salt it has limits and ones it reaches its limit it wont have the ability to disolve any salt
The ideal gas law only approximates the behaviour of real gases. The conditions
under which the ideal gas law is MOST accurate are
a. Low pressure and high temperature
b. Low pressure and low temperature
c. High pressure and high temperature
d. High pressure and low temperature
Why is aluminum considered a nonrenewable resource?
10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A". Then, 100 mL
of solution A were diluted to a volume of 500 mL of "Solution B". What is the
molarity of solution B? (Report your answer to four places past the decimal point.
Moodle is looking for a number only, no units.)
0.47 M is the molarity of solution B if 10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A".
Define the molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Solvent \;in \;kg}[/tex]
Moles of LiCl
[tex]Moles = \frac{mass}{molar \;mass}[/tex]
[tex]Moles = \frac{10.00 g}{42.394 g/mol}[/tex]
Moles = 0.2358824362
[tex]Molality = \frac{0.2358824362}{0.5 L}[/tex]
Molarity = 0.4717648724 M =0.47 M
Hence, 0.47 M is the molarity of solution B.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
When Earth receives energy from the Sun, ____. a. some energy is reflected back into space b. some is absorbed by the atmosphere c. some is absorbed by land and water on Earth's surface d. all of the above Please select the best answer from the choices provided A B C D
Answer:
D - all of the above
Explanation:
the difference between cow stomach and human stomach
The primary distinction between the digestive systems of cows and humans is that the former uses a foregut fermenter while the latter uses a straightforward monogastric digestion. The types of teeth, mouths, stomachs, guts, and digestive enzymes released by the gut also vary between the two digestive systems. Cows and humans have different digestive systems because they have evolved two different sorts of dietary patterns based on their capacities. The primary distinctions between the digestive systems of cows and humans are in the types of teeth, mouths, stomachs, and intestines, as well as the enzymes released.
Answer:
The main difference between cow and human digestive system is that cow exhibits a foregut fermenter digestion whereas human exhibits a simple monogastric digestion. Both digestive systems also differ by the type of teeth, mouth, stomach, gut, and digestive enzymes secreted by the gut.
Explanation:
How many moles of oxygen are in 4.4 moles of Al(NO3)3 ?
Answer: 40. mol (to 2 sf)
Explanation:
Since there are 9 oxygen atoms in every molecule of aluminum nitrate, this means that there are 9 moles of oxygen atoms in each mole of aluminum nitrate.
So, in 4.4 moles, there are 9(4.4) = 40. mol (to 2 sf)
which trends increase to the lower left: metallic character, non-metallic character, atomic radius, ionization energy, electronegativity?
Metallic character increase to the lower left of the periodic table.
What is periodicity?Periodicity is the regular variation in the properties of an element across a period and down a group.
The following properties of elements show periodicity:
metallic character,non-metallic character,atomic radius, ionization energy,electronegativityThe properties that shows increasing trend to The lower left of the periodic table is metallic character.
Learn more about periodicity at: https://brainly.com/question/14227831
#SPJ11
Which of the following equations represents a nuclear charge?
A) H2O(s) + Heat --> H2O(I)
B) H2CO3(aq) --> H2O(I) + CO2(g)
C) 14 14 0
C --> N + e
6 7 -1
D) H2CO3(aq) + Ca(OH)2(aq) --> CaCO3(s) + 2 H2O(I)
Select one:
a. A
b. B
c. C
d. D
Which element is most likely to have a high thermal conductivity
Copper has the highest thermal conductivity as compared to other metals in the periodic table.
What is thermal conductivity?Thermal conductivity refers to the rate at which heat is transferred by conduction through a unit cross-section area of a material. When a temperature increases at one end it moves to the other end through conduction.
So we can conclude that Copper has the highest thermal conductivity as compared to other metals in the periodic table.
Learn more about thermal here: https://brainly.com/question/19666326
#SPJ1
1. 10.0 g of CaCO 3 on heating gave 4.4 g of CO 2 and 5.6 g of CaO. The observation is in agreement with the law of conservation of mass.
2. hydrogen and oxygen are combined to form two compounds the hydrogen content in one of the compound is 5.93 % and another is 11.2 % is this obey the law of multiple proportion.
3. On analysis it was found that the black oxide of Copper and red oxide of copper contains 80 and 89% of copper respectively Is this obeys the law of multiple proportion.
4.when 8.4 G of NaHco3 is added to the solution of Acetic Acid weighing 20 gram if it is observed that 4.4 gram of Co2 is released into the atmosphere and Residue is left Behind what is the mass of left Residue.
Answer:
According to the law <br> Mass of reactants = mass of product, here <br> `underset(10 g)(CaCO_(3))rarr underset(4.4 g)(CO_(2))+underset(x)(CaO)` <br> Hence, x = 10 g - 4.4 g = 5.6 g <br> Which is mass of CaO.dIn the first compound <br> Hydrogen = 5.93 % <br> Oxygen = `(100-5.93)% = 94.07 %` <br> In the second compound <br> Hydrogen = 11.2 % <br> Oxygen `= (100-11.2)%=88.8%` <br> In the first compound the number of parts by mass of oxygen that combine with one part by mass of hydrogen `=(94.07)/(5.93)=15.86` parts ...(The ratio of Cu combining with fixed weight of oxygen in black and red oxide is 1 : 2 respectively. Step by step solution by experts to help you in doubt clearance & scoring excellent marks in exams.) {Check something more in the above attachment!}Refer to the above attachmentExplanation:
Mark this answer as brainlest answer!!
