Answer:
19.872 degrees
Explanation:
Mathematically;
Using Snell’s law
n1 sin A = n2 sinB
Where ;
n1 = refractive index in air = 1
n2 is refractive index in water = 1.33
A = ?
B = 45
Substituting the values in the equation;
1 sin A = 1.33 sin45
Sin A = 1.33 sin 45
A = arc sin (1.33 sin 45)
A = 70.12
Thus, the actual direction of the Sun with respect to the horizon = 90-A = 19.872 degrees
Some types of spiders build webs that consist of threads made of dry silk coated with a solution of a variety of compounds. This coating leaves the threads, which are used to capture prey, hygroscopic - that is, they attract water from the atmosphere. It has been hypothesized that this aqueous coating makes the threads good electrical conductors. To test the electrical properties of coated thread, researchers placed a 5-mm length of thread between two electrical contacts. The researchers stretched the thread in 1-mm increments to more than twice its original length, and then allowed it to return to its original length, again in 1-mm increments. Some of the resistance measurements are shown.If the conductivity of the thread results from the aqueous coating only, how does the cross-sectional area A of the coating compare when the thread is 13 mm long versus the starting length of 5 mm? Assume that the resistivity of the coating remains constant and the coating is uniform along the thread.If the conductivity of the thread results from the aqueous coating only, how does the cross-sectional area of the coating compare when the thread is 13 long versus the starting length of 5 ? Assume that the resistivity of the coating remains constant and the coating is uniform along the thread.A13mm is about 1/10 A5mm.A13mm is about 1/4 A5mm. === correct answer... I figured it out. R = pL/A. L is 2.5 times. Therefore, A must be 1/4 times.A13mm is about 2/5 A5mm.A13mm is the same as A5mm.
Answer:
A13 mm is about 1/4 A5 mm
Explanation:
Find the attachment
When Marcel finds the distance L from the previous part, it turns out to be greater than Lend, the distance from the pivot to the end of the seesaw. Hence, even with Jacques at the very end of the seesaw, the twins Gilles and Jean exert more torque than Jacques does. Marcel now elects to balance the seesaw by pushing sideways on an ornament (shown in red) that is at height h above the pivot. (Figure 3)With what force in the rightward direction, Fx, should Marcel push? If your expression would give a negative result (using actual values) that just means the force should be toward the left.Express your answer in terms of W, Lend, w, L2, L3, and h.
Answer:
Fx = - (1/h)( wL2 + wL3 - wLend )
Explanation:
Assuming The twins Gilles and Jean has a weight ( w ) each
The torque that would balance the equation would be = wL2 + wL3 -------- 1
THEREFORE the ccw torques are = wLend + Fh ----------- 2
hence equation 2 equals equation 1
= wLend + Fh = wL2 + wL3 --------- 3
equation 3 can as well be represented as
F = ( 1/h) ( wL2 + wL3 - wLend )---------- 4
From equation 4 it can be seen that F is on the left hand side therefore the value of Fx is negative
therefore equation 4 is represented as
Fx = - (1/h)( wL2 + wL3 - wLend )
A flock of ducks is trying to migrate south for the winter, but they keep being blown off course by a wind blowing from the west at 5.0 m/s . A wise elder duck finally realizes that the solution is to fly at an angle to the wind.If the ducks can fly at 7.0 m/s relative to the air, what direction should they head in order to move directly south?
The ducks' flight path as observed by someone standing on the ground is the sum of the wind velocity and the ducks' velocity relative to the wind:
ducks (relative to wind) + wind (relative to Earth) = ducks (relative to Earth)
or equivalently,
[tex]\vec v_{D/W}+\vec v_{W/E}=\vec v_{D/E}[/tex]
(see the attached graphic)
We have
ducks (relative to wind) = 7.0 m/s in some direction θ relative to the positive horizontal direction, or[tex]\vec v_{D/W}=\left(7.0\dfrac{\rm m}{\rm s}\right)(\cos\theta\,\vec\imath+\sin\theta\,\vec\jmath)[/tex]
wind (relative to Earth) = 5.0 m/s due East, or[tex]\vec v_{W/E}=\left(5.0\dfrac{\rm m}{\rm s}\right)(\cos0^\circ\,\vec\imath+\sin0^\circ\,\vec\jmath)[/tex]
ducks (relative to earth) = some speed v due South, or[tex]\vec v_{D/E}=v(\cos270^\circ\,\vec\imath+\sin270^\circ\,\vec\jmath)[/tex]
Then by setting components equal, we have
[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta+5.0\dfrac{\rm m}{\rm s}=0[/tex]
[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]
We only care about the direction for this question, which we get from the first equation:
[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta=-5.0\dfrac{\rm m}{\rm s}[/tex]
[tex]\cos\theta=-\dfrac57[/tex]
[tex]\theta=\cos^{-1}\left(-\dfrac57\right)\text{ OR }\theta=360^\circ-\cos^{-1}\left(-\dfrac57\right)[/tex]
or approximately 136º or 224º.
Only one of these directions must be correct. Choosing between them is a matter of picking the one that satisfies both equations. We want
[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]
which means θ must be between 180º and 360º (since angles in this range have negative sine).
So the ducks must fly (relative to the air) in a direction 224º relative to the positive horizontal direction, or about 44º South of West.
To open a door, you apply a force of 10 N on the door knob, directed normal to the plane of the door. The door knob is 0.9 meters from the hinge axis, and the door swings open with an angular acceleration of 5 radians per second squared. What is the moment of inertia of the door
Answer:
The moment of inertia is [tex]I = 1.8 \ kg m^2[/tex]
Explanation:
From the question we are told that
The force applied is [tex]F = 10 \ N[/tex]
The distance of the knob to the hinge is [tex]d = 0.9 \ m[/tex]
The angular acceleration is [tex]a = 5 \ rad/s[/tex]
The moment is mathematically represented as
[tex]I = \frac{d Fsin(\theta)}{a}[/tex]
Here [tex]\theta = 90^o[/tex] This is because the force direction is perpendicular to the plane of the door
substituting values
[tex]I = \frac{0.9 * 10 * sin (90)}{5}[/tex]
[tex]I = 1.8 \ kg m^2[/tex]
A low C (f=65Hz) is sounded on a piano. If the length of the piano wire is 2.0 m and
its mass density is 5.0 g/m2, determine the tension of the wire.
Answer:
T = 676 N
Explanation:
Given that: f = 65 Hz, L = 2.0 m, and ρ = 5.0 g[tex]/m^{2}[/tex] = 0.005 kg
A stationary wave that is set up in the string has a frequency of;
f = [tex]\frac{1}{2L}[/tex][tex]\sqrt{\frac{T}{M} }[/tex]
⇒ T = 4[tex]L^{2}[/tex][tex]f^{2}[/tex]M
Where: t is the tension in the wire, L is the length of the wire, f is the frequency of the waves produced by the wire and M is the mass per unit length of the wire.
But M = L × ρ = (2 × 0.005) = 0.01 kg/m
T = 4 × [tex]2^{2}[/tex] ×[tex]65^{2}[/tex] × 0.01
= 4 × 4 ×4225 × 0.01
= 676 N
Tension of the wire is 676 N.
What is the speed at which a spaceship shoots up from earth ?
Answer:
Once at a steady cruising speed of about 16,150mph (26,000kph
Explanation:
Proposed Exercise - Mass Center of a Composite Body Determine the coordinates (x, y) of the center of mass of the body illustrated in the picture below
Answer:
x = 3.76 cm
y = 3.76 cm
Explanation:
This composite shape can be modeled as a square (7.2 cm × 7.2 cm) minus a quarter circle in the lower left corner (3.6 cm radius) and a right triangle in the upper right corner (3.6 cm × 3.6 cm).
The centroid of a square (or any rectangle) is at x = b/2 and y = h/2.
The centroid of a quarter circle is at x = y = 4r/(3π).
The centroid of a right triangle is at x = b/3 and y = h/3.
Build a table listing each shape, the coordinates of its centroid (x and y), and its area (A). Use negative areas for the shapes that are being subtracted.
Next, multiply each coordinate by the area (Ax and Ay), sum the results (∑Ax and ∑Ay), then divide by the total area (∑Ax / ∑A and ∑Ay / ∑A). The result will be the x and y coordinates of the center of mass.
See attached image.
Which of the followings is true about EMF?
a. an induced emf is caused by a changing magnetic flux.
b. an emf can only be induced in a conducting loop by moving the loop through an area that has a constant magnetic field.
c. an induced emf can be observed by measuring the current that is created.
d. an induced emf and conventional induced current are in opposite directions.
Answer:
a. TRUTH
b. FALSE
c. TRUTH
d. FALSE
Explanation:
The emf (electromagnetic force) is generated in a loop or solenoid by the change in the magnetic flux in a closed conductor path (for example, a wire).
This can be noted in the following formula, which is known as the Lenz's law:
[tex]emf=-N\frac{d\Phi_B}{dt}=-N\frac{d(AB)}{dt}[/tex] (1)
Then, the change, in time, of the area of the conductor, or the change in the magnitude of the magnetic field, the induced emf acquires different values. Furthermore, the loops have a resistance, then, a current can be measured when an emf is induced.
Based on this information you have:
a. an induced emf is caused by a changing magnetic flux. TRUTH
b. an emf can only be induced in a conducting loop by moving the loop through an area that has a constant magnetic field. FALSE
c. an induced emf can be observed by measuring the current that is created. TRUTH
d. an induced emf and conventional induced current are in opposite directions. TRUTH (the minus sing in the equation (1) )
An aluminum "12 gauge" wire has a diameter d of 0.205 centimeters. The resistivity ρ of aluminum is 2.75×10−8 ohm-meters. The electric field in the wire changes with time as E(t)=0.0004t2−0.0001t+0.0004 newtons per coulomb, where time is measured in seconds.
Complete Question
An aluminum "12 gauge" wire has a diameter d of 0.205 centimeters. The resistivity ρ of aluminum is 2.75×10−8 ohm-meters. The electric field in the wire changes with time as E(t)=0.0004t2−0.0001t+0.0004 newtons per coulomb, where time is measured in seconds.
I = 1.2 A at time 5 secs.
Find the charge Q passing through a cross-section of the conductor between time 0 seconds and time 5 seconds.
Answer:
The charge is [tex]Q =2.094 C[/tex]
Explanation:
From the question we are told that
The diameter of the wire is [tex]d = 0.205cm = 0.00205 \ m[/tex]
The radius of the wire is [tex]r = \frac{0.00205}{2} = 0.001025 \ m[/tex]
The resistivity of aluminum is [tex]2.75*10^{-8} \ ohm-meters.[/tex]
The electric field change is mathematically defied as
[tex]E (t) = 0.0004t^2 - 0.0001 +0.0004[/tex]
Generally the charge is mathematically represented as
[tex]Q = \int\limits^{t}_{0} {\frac{A}{\rho} E(t) } \, dt[/tex]
Where A is the area which is mathematically represented as
[tex]A = \pi r^2 = (3.142 * (0.001025^2)) = 3.30*10^{-6} \ m^2[/tex]
So
[tex]\frac{A}{\rho} = \frac{3.3 *10^{-6}}{2.75 *10^{-8}} = 120.03 \ m / \Omega[/tex]
Therefore
[tex]Q = 120 \int\limits^{t}_{0} { E(t) } \, dt[/tex]
substituting values
[tex]Q = 120 \int\limits^{t}_{0} { [ 0.0004t^2 - 0.0001t +0.0004] } \, dt[/tex]
[tex]Q = 120 [ \frac{0.0004t^3 }{3} - \frac{0.0001 t^2}{2} +0.0004t] } \left | t} \atop {0}} \right.[/tex]
From the question we are told that t = 5 sec
[tex]Q = 120 [ \frac{0.0004t^3 }{3} - \frac{0.0001 t^2}{2} +0.0004t] } \left | 5} \atop {0}} \right.[/tex]
[tex]Q = 120 [ \frac{0.0004(5)^3 }{3} - \frac{0.0001 (5)^2}{2} +0.0004(5)] }[/tex]
[tex]Q =2.094 C[/tex]
The charge (Q) passing through a cross-section of the conductor between time 0 seconds and time 5 seconds is 2.094 Coulomb.
Given the following data:
Diameter of wire = 0.205 centimeters.Resistivity of aluminum = [tex]2.75\times 10^{-8}[/tex] Ohm-meters.[tex]E(t)=0.0004t^2-0.0001t+0.0004[/tex] Newton per coulomb.Conversion:
Diameter of wire = 0.205 cm to m = 0.00205 meter.
Radius = [tex]\frac{Diameter}{2} =\frac{0.00205}{2} =0.001025\;meter[/tex]
To determine the charge (Q) passing through a cross-section of the conductor between time 0 seconds and time 5 seconds, we would apply Gauss's law in an electric field for a surface charge:
First of all, we would find the area of the wire.
[tex]Area = \pi r^2\\\\Area = 3.142 \times 0.001025^2\\\\Area = 3.3 \times 10^{-6}\;m^2[/tex]
Mathematically, Gauss's law in an electric field for a surface charge is given by the formula:
[tex]Q = \int\limits^t_0 {\frac{A}{\rho } E(t)} \, dt[/tex]
Where:
A is the area of a conductor.[tex]\rho[/tex] is the resistivity of a conductor.t is the time.E is the electric field.Substituting the given parameters into the formula, we have;
[tex]Q= \int\limits^t_0 {\frac{3.3 \times 10^{-6}}{2.75\times 10^{-8} } (0.0004t^2-0.0001t+0.0004)} \, dt\\\\Q=120\int\limits^t_0 1{ (0.0004t^2-0.0001t+0.0004)} \, dt[/tex]
[tex]Q=120(\frac{0.0004t^3}{3} -\frac{0.0001t^2}{2} +0.0004t |\left{5} \atop {0} \right[/tex]
When t = 5 seconds:
[tex]Q=120(\frac{0.0004[5]^3}{3} -\frac{0.0001[5]^2}{2} +0.0004[5])\\\\Q=120(\frac{0.03}{3} -\frac{0.0025}{2} +0.002)\\\\Q=120(0.0167-0.00125+0.002)\\\\Q=120(0.01745)[/tex]
Q = 2.094 Coulomb.
Find more information: https://brainly.com/question/18214726
The friends now feel ready to try a problem. Suppose an Atwood machine has a mass of m1 = 2.5 kg and another mass of m2 = 8.5 kg hanging on opposite sides of the pulley. Assume the pulley is massless and frictionless, and the cord is ideal. Determine the magnitude of the acceleration of the two objects and the tension in the cord.
Answer:
a = 5.34 m/s²
T = 37.86 N
Explanation:
This is the case where two masses are hanging vertically on sides of the pulley. In such case, the formula for acceleration of objects is derived to be:
a = g(m₂ - m₁)/(m₂ + m₁)
where,
a = acceleration of both masses = ?
g = 9.8 m/s²
m₂ = heavier mass = 8.5 kg
m₁ = lighter mass = 2.5 kg
Therefore,
a = (9.8 m/s²)(8.5 kg - 2.5 kg)/(8.5 kg + 2.5 kg)
a = (9.8 m/s²)(6 kg)/(11 kg)
a = 5.34 m/s²
The formula for tension in cable is derived to be:
T = 2m₁m₂g/(m₁ + m₂)
T = (2)(2.5 kg)(8.5 kg)(9.8 m/s²)/(2.5 kg + 8.5 kg)
T = 37.86 N
Nowdothesameproblemwiththepivotatthe toes. A Ballet dancer puts all her weight on the toes of one foot. If her mass is 60 kg, what is the force that has to be exerted by her leg muscle to hold that pose? Assume the pivot is at the toes.
Answer:
The force is [tex]F = 2400 \ N[/tex]
Explanation:
The diagram for this question is shown on the first uploaded image
From the question we are told that
The mass of the dancer is [tex]m_d = 60 \ kg[/tex]
From the diagram the
The first distance is [tex]l_1 = 20 \ cm[/tex]
The second distance is [tex]l_2 = 5 \ cm[/tex]
At equilibrium the moment about the center of the dancers feet is mathematically represented as
[tex]F * l_2 - (mg* l_1)[/tex]
Where [tex]g= 10 \ m/s^2[/tex]
substituting values
[tex]F * 5 - (60* 9.8 * 20)[/tex]
=> [tex]F = \frac{60 * 10 * 30}{5}[/tex]
=> [tex]F = 2400 \ N[/tex]
Now consider a different electromagnetic wave, also described by: Ex(z,t) = Eocos(kz - ω t + φ) In this equation, k = 2π/λ is the wavenumber and ω = 2π f is the angular frequency. In this case, though, assume φ = +30o and Eo = 1 kV/m. What is the value of Ex(z,t) when z/λ = 0.25 and ft = 0.125?
Answer:
Explanation:
Ex(z,t) = Eocos(kz - ω t + φ)
k = 2π/λ , ω = 2π f
φ = +30° , E₀ = 10³ V .
z/λ = 0.25 , ft = 0.125
Ex(z,t) = Eocos(2πz/λ - 2πf t + φ)
Putting the values given above
Ex(z,t) = 10³ cos ( 2π / 4 - 2π x .125 + 30⁰ )
= 1000cos (90⁰ - 45+30)
= 1000 cos 75
=258.8 V .
A 1100 kg car pushes a 1800 kg truck that has a dead battery. When the driver steps on the accelerator, the drive wheels of the car push against the ground with a force of 4500 N.A) What is the magnitude of the force of the car on the truck?B) What is the magnitude of the force of the truck on the car?
Answer:The answer is 3000 N.
Force (F) is the multiplication of mass (m) and acceleration (a).
F = m · a
It is given:
mc = 1000 kg
mt = 2000 kg
total force: F = 4500 N
total mass: m = mc + mt
Let's calculate acceleration which is common:
a = F/m = F/(mc + mt) = 4500/(1000 + 2000) = 4500/3000 = 1.5 m/s²
Now, when we know acceleration, let's calculate force on the truck:
Ft = mt · a = 2000 · 1.5 = 3000 N
Explanation:
Jason takes off from rest across level water on his jet-powered skis. The combined mass of Jason and his skis is 75 kg (the mass of the fuel is negligible). The skis have a thrust of 200 N and a coefficient of kinetic friction on water of 0.10. Unfortunately, the skis run out of fuel after only 75 s. What is Jason's top speed?
Answer:
v = 126 m / s
Explanation:
Let's analyze this exercise a little, they give us the thrust that is the applied force and the time that it lasts, and they ask us for the final speed, so we can use the Impulse ratio and the variation of the amount of movement
I = F t = Dp
F t = pf -p₀
Now let's use Newton's second law to find the net thrust
F = E - fr
the friction force has the formula
fr = μ N
let's write Newton's second law on the y-axis
N-W = 0
N = W
we substitute
fr = μ mg
we look for the net out
F = 200 - μ mg
With the skater starting from rest, the initial speed is zero (vo = 0)
we substitute
(200 - very m g) t = m v
v = (200 µm - very g) t
let's calculate
v = (200/75 - 0.10 9.8) 75
v = 126 m / s
Two identical objects are pressed against two different springs so that each spring stores 55.0J of potential energy. The objects are then released from rest. One spring is quite stiff (hard to compress), while the other one is quite flexible (easy to compress).Which of the following statements is or are true? (More than one statement may be true.)A. Both objects will have the same maximum speed after being released.B. The object pressed against the stiff spring will gain more kinetic energy than the other object.C. Both springs are initially compressed by the same amount.D. The stiff spring has a larger spring constant than the flexible spring.E. The flexible spring must have been compressed more than the stiff spring.
Answer:
A , D , E
Explanation:
Solution:-
- Consider the two identical objects with mass ( m ).
- The stiffness of the springs are ( k1 and k2 ).
- Both the spring store 55.0 J of potential energy.
- We will apply the principle of energy conservation on both the systems. In both cases the spring stores 55.0 Joules of energy. Once released, the objects gain kinetic energy with a consequent loss of potential energy in either spring.
- The maximum speed ( v ) is attained when all the potential energy is converted to kinetic energy.
- Apply Energy conservation for spring with stiffness ( k1 ).
ΔU = ΔEk
55.0 = 0.5*m*v^2
v = √ ( 110 / m )
- Apply Energy conservation for spring with stiffness ( k2 ).
ΔU = ΔEk
55.0 = 0.5*m*v^2
v = √ ( 110 / m )
Answer: Both objects will have the same maximum speed ( A )
- We are told that one spring is more stiff as compared to the other one. The measure of stiffness is proportionally quantified by the spring constant. To mathematically express we can write it as:
k1 > k2
Where,
k1: The stiff spring
k2: The flexible spring
Answer: The stiff spring has a larger spring constant than the flexible spring. ( D )
- We will assume that the spring with constant ( k1 ) undergoes a displacement ( x1 ) and the spring with constant ( k2 ) undergoes a displacement ( x2 ). The potential energy stored in both spring is the same. Hence,
U1 = U2
0.5*( k1 ) * ( x1 )^2 = 0.5*( k2 ) * ( x2 )^2
[ k1 / k2 ] = [ x2 / x1 ]^2
Since,
k1 > k2 , then [ k1 / k2 ] > 1
Then,
[ x2 / x1 ]^2 > 1
[ x2 / x1 ] > 1
x2 > x1
Answer: The flexible spring ( x2 ) was compressed more than the stiff spring ( x1 ). ( E )
A worker with spikes on his shoes pulls on rope that is attached to a box that is resting on a flat, frictionless frozen lake. The box has mass m, and the worker pulls with a constant tension T at an angle θ = 40 ∘ above the horizontal. There is a strong headwind on the lake, which produces a horizontal force Fw that is pointed in the opposite direction than the box is being pulled. Draw a free-body diagram for this system. Assume that the worker pulls the box to the right. If the wind force has a magnitude of 30 N, with what tension must the worker pull in order to move the box at a constant velocity?
Answer:
a
The free body diagram is shown on the first uploaded image
b
The tension on the rope is [tex]T=39.16 \ N[/tex]
Explanation:
From the question we are told that
The mass of the box is m
The tension on the box is T
The angle at which it is pulled is [tex]\theta = 40^o[/tex]
The force produced by the strong head wind is [tex]Fw = 30 \ N[/tex]
At equilibrium the net force acting on the block along the horizontal axis is zero i.e
[tex]Tcos \theta -F_w = 0[/tex]
substituting values
[tex]Tcos (40) -30 = 0[/tex]
[tex]Tcos (40) = 30[/tex]
[tex]T(0.76604)) = 30[/tex]
[tex]T=39.16 \ N[/tex]
The rate of heat conduction out of a window on a winter day is rapid enough to chill the air next to it. To see just how rapidly windows conduct heat, calculate the rate of conduction in watts through a 2.82 m2 window that is 0.675 cm thick if the temperatures of the inner and outer surfaces are 5.00°C and −10.0°C, respectively. This rapid rate will not be maintained — the inner surface will cool, and frost may even form. The thermal conductivity of glass is 0.84 J/(s · m · °C).
Answer:
Q = - 5264 W = - 5.26 KW
Here, negative sign indicates the outflow of heat
Explanation:
Fourier's Law of heat conduction, gives the following formula:
Q = - KAΔT/t
where,
Q = Rate of Heat Conduction out of window = ?
K = Thermal Conductivity of Glass = 0.84 W/m.°C
A =Surface Area of window = 2.82 m²
ΔT = Difference in Temperature of both sides of surface
ΔT = Inner Surface Temperature - Outer Surface Temperature= 5°C - (- 10°C)
ΔT = 15°C
t = thickness of window = 0.675 cm = 0.00675 m
Therefore,
Q = - (0.84 W/m.°C)(2.82 m²)(15°C)/0.00675 m
Q = - 5264 W = - 5.26 KW
Here, negative sign indicates the outflow of heat.
Thana reminds Alston that because the electric field is uniform, a constant electric force is exerted on the electron. Alston recognizes that, in this case, they can use the kinematic equations to describe the motion of the charged particle while it is inside the region containing the electric field. He asks Thana to write down an equation they can use to calculate the acceleration of the particle while it is inside the region containing a uniform electric field. Which of These equations is correct?
Answer:
a = - e E / m
a = - 1,758 10¹¹ E
Explanation:
For this exercise we can use Newton's second law
F = m a
where the force is electric
the forces given by the product of the charge by the electric field
F = q E
in this case tell us that the charge is the charge of the electron
q = -e = - 1.6 10⁻¹⁹ C
we substitute
- e E = m a
a = - e E / m
we calculate
a = - 1.6 10⁻¹⁹ / 9.1 10⁻³¹ E
a = - 1,758 10¹¹ E
The negative sign indicates that the acceleration is in the opposite direction to the electric field
What is the resistance of a circuit with a voltage of 10 V in a current of 5 A use almond law to create the resistance
Answer:
2Ω
Explanation:
Ohm's law:
V = IR
10 V = (5 A) R
R = 2 Ω
Astronaut Flo wishes to travel to a star 20 light years away and return. Her husband Malcolm, who was the same age as Flo when she departs, stays home (baking cookies). If Flo travels at a constand speed of 80% of the speed of light (except for a short time to turn around), how much younger than Malcolm will Flo be when she returns? How long does Malcolm sit around baking cookies? How far is the distance to Flo?
Answer:
a. about 20 years younger
b. Malcolm sits around for 49.94 years
c. 2.268x[tex]10^{17}[/tex] m
Explanation:
light travels 3x[tex]10^{8}[/tex] m in one seconds
in 20 years that will be 3x[tex]10^{8}[/tex] x 20 x 60 x 60 x 24 x 365 = 1.89x[tex]10^{17}[/tex] m
for the to and fro journey, total distance covered will be 2 x 1.89x[tex]10^{17}[/tex] = 3.78x[tex]10^{17}[/tex] m
Flo's speed = 80% of speed of light = 0.8 x 3x[tex]10^{8}[/tex] = 2.4x[tex]10^{8}[/tex] m/s
time that will pass for Malcolm will be distance/speed = 3.78x[tex]10^{17}[/tex] /2.4x[tex]10^{8}[/tex]
= 1575000000 s = 49.94 years
the relativistic time t' will be
t' = t x [tex]\sqrt{1 - \frac{v^{2} }{c^{2} } }[/tex]
t' = 49.94 x [tex]\sqrt{1 - 0.8^{2} }[/tex]
t' = 49.94 x 0.6 = 29.96 years this is the time that has passed for Flo
this means that Flo will be about 20 years younger than Malcolm when she returns
relativistic distance is
d' = d x [tex]\sqrt{1 - \frac{v^{2} }{c^{2} } }[/tex]
d' = 3.78x[tex]10^{17}[/tex] x [tex]\sqrt{1 - 0.8^{2} }[/tex]
d' = 3.78x[tex]10^{17}[/tex] x 0.6
d' = 2.268x[tex]10^{17}[/tex] m this is how far it is to Flo
A projectile is launched on the Earth with a certain initial velocity and moves without air resistance. Another projectile is launched with the same initial velocity on the Moon, where the acceleration due to gravity is one-sixth as large. How does the maximum altitude of the projectile on the Moon compare with that of the projectile on the Earth?
With smaller gravitational forces and therefor less vertical acceleration, the projectile launched on the moon ... with the same initial speed and direction ...
-- climbs faster,
-- spends more time climbing,
-- reaches a higher peak,
-- falls slower,
-- spends more time falling, and
-- covers more horizontal distance
than the projectile launched on the Earth.
This is not because of air resistance. It would be true even if there were no air resistance on the Earth. It's entirely a gravity thing.
An unstrained horizontal spring has a length of 0.36 m and a spring constant of 320 N/m. Two small charged objects are attached to this spring, one at each end. The charges on the objects have equal magnitudes. Because of these charges, the spring stretches by 0.033 m relative to its unstrained length. Determine (a) the possible algebraic signs and (b) the magnitude of the charges.
Answer:
1.been both -ve charged or both +be charged particles
2. 3.52mC
Explanation:
For the charge particle to cause an extension or movement of the string from its unrestrained position they would have been both -ve charged or both +be charged particles that's because like charges repel.
Now the Force sustain by the extended string is
F = Ke;
Where K is the force constant of the string, 320 N/m
e is the extension,0.033 m
F = 320 × 0.033 =10.56N
2.But according to columns law of charge;
F = kQ1 Q2
But Q1=Q2{ since the charge are of the same magnitude}.
Hence F = KQ^2
Where K is columns constant =9×10^9F/m
Hence Q=√F/K
Q= √10.56/9×10^9
=3.52×10^-3C
= 3.52mC
A silver rod having a length of 83.0 cm and a cross-sectional diameter of 2.40 cm is used to conduct heat from a reservoir at a temperature of 540 oC into an otherwise completely thermally insulated chamber that contains 1.43 kg of ice at 0 oC. How much time is required for the ice to melt completely
Answer:
3985 s or 66.42 mins
Explanation:
Given:-
- The length of the rod, L = 83.0 cm
- The cross sectional diameter of rod , d = 2.4 cm
- The temperature of reservoir, Tr = 540°C
- The amount of ice in chamber, m = 1.43 kg
- The temperature of ice, Ti = 0°C
- Thermal conductivity of silver, k = 406 W / m.K
- The latent heat of fusion of water, Lf = 3.33 * 10^5 J / kg
Find:-
How much time is required for the ice to melt completely
Solution:-
- We will first determine the amount of heat ( Q ) required to melt 1.43 kg of ice.
- The heat required would be used as latent heat for which we require the latent heat of fusion of ice ( Lf ). We will employ the first law of thermodynamics assuming no heat is lost from the chamber ( perfectly insulated ):
[tex]Q = m*L_f\\\\Q = ( 1.43 ) * ( 3.33 * 10 ^5 )\\\\Q = 476190 J[/tex]
- The heat is supplied from the hot reservoir at the temperature of 540°C by conduction through the silver rod.
- We will assume that the heat transfer through the silver rod is one dimensional i.e along the length ( L ) of the rod.
- We will employ the ( heat equation ) to determine the rate of heat transfer through the rod as follows:
[tex]\frac{dQ}{dt} = \frac{k.A.dT}{dx}[/tex]
Where,
A: the cross sectional area of the rod
dT: The temperature difference at the two ends of the rod
dx: The differential element along the length of rod ( 1 - D )
t: Time ( s )
- The integrated form of the heat equation is expressed as:
[tex]Q = \frac{k*A*( T_r - T_i)}{L}*t[/tex]
- Plug in the respective parameters in the equation above and solve for time ( t ):
[tex]476190 = \frac{406*\pi*0.024^2 * ( 540 - 0 ) }{0.83*4}*t \\\\t = \frac{476190}{119.49619} \\\\t = 3985 s = 66.42 mins[/tex]
Answer: It would take 66.42 minutes to completely melt the ice
Penny is adjusting the position of a stand up piano of mass mp = 150 kg in her living room. The piano is lp = 1.35 m in length. The piano is currently at an angle of θp = 36 degrees to the wall. Penny wants to rotate the piano across the carpeted floor so that it is flat up against the wall. To move the piano, Penny pushes on it at the point furthest from the wall. This piano does not have wheels, so you can assume that the friction between the piano and the rug acts at the center of mass of the piano.
Required:
a. Write an expression for the minimum magnitude of the force FS in N Penny needs to exert on the piano to get it moving. Assume the corner of the piano on the wall doesn't slide and the static friction between the rug and the piano is µs.
b. The coefficient of kinetic friction between the carpet and the piano is uk = 0.27. Once the piano starts moving, calculate the torque τ in N·m that Penny needs to apply to keep moving the piano at a constant angular velocity.
c. Calculate the amount of work Wp, in J Penny does on the piano as she rotates it.
Answer:
a) Fs = (μs*mp*g)/2 | b) τ = Fs*lp | c) Wτ,constant = τΘ
Explanation:
a) Fs = (μs*mp*g)/2
b) τ = Fs*lp
c) Wτ,constant = τΘ
Engineers and science fiction writers have proposed designing space stations in the shape of a rotating wheel or ring, which would allow astronauts to experience a sort of artificial gravity when walking along the inner wall of the station's outer rim. (a) Imagine one such station with a diameter of 104 m, where the apparent gravity is 2.20 m/s2 at the outer rim. How fast is the station rotating in revolutions per minute
Answer:
f = 1.96 revolutions per minute
Explanation:
The formula for the the frequency of revolution of a satellite, to develop an artificial gravity, with the help of centripetal acceleration is given as follows:
f = (1/2π)√(ac/r)
where,
f = frequency of rotation = ?
ac = centripetal acceleration= apparent gravity or artificial gravity = 2.2 m/s²
r = radius of station or satellite = diameter/2 = 104 m/2 = 52 m
Therefore,
f = (1/2π)√[(2.2 m/s²)/(52 m)]
f = (0.032 rev/s)(60 s/min)
f = 1.96 revolutions per minute
Explain why it is necessary to have a high voltage
Answer:
SO THAT
EACH APPLIANCE CAN GET SUFFICIENT POTENTIAL DIFF. TO RUNWhile her kid brother is on a wooden horse at the edge of a merry-go-round, Sheila rides her bicycle parallel to its edge. The wooden horses have a tangential speed of 6 m/s. Sheila rides at 4 m/s. The radius of the merry-go-round is 8 m. At what time intervals does Sheila encounter her brother, if she rides opposite to the direction of rotation of the merry-go-round?
a. 5.03 s
b. 8.37 s
c. 12.6 s
d. 25.1 s
e. 50.2 s
Answer:
t = 5.03 s
Explanation:
To find the time interval when Sheila encounter her brother, you first calculate the angular speed of both Sheila and her brother.
You use the following formula:
[tex]\omega = \frac{v}{r}[/tex]
w: angular speed
v: tangential speed
r: radius of the trajectory = 8 m
For you have:
[tex]\omega=\frac{4m/s}{8m}=0.5\frac{rad}{s}[/tex]
For her brother:
[tex]\omega'=\frac{6m/s}{8m}=0.75\frac{rad}{s}[/tex]
Next, they will encounter to each other when the angular distance of the Brother of sheila equals the angular distance of Sheila in the opposite direction. This can be written as follow:
[tex]\theta=\omega t\\\\\theta'=\omega ' t[/tex]
They encounter for θ = 2π-θ':
[tex]\omega t=2\pi-\omega' t[/tex]
You replace the values of the parameters in the previous equation and solve for t:
[tex]0.5t=2\pi-0.75t\\\\1.25t=2\pi\\\\t=5.026\approx5.03[/tex]
Hence, Sheila encounter her brother in 5.03 s
the part of the brain stem called the has been shown to related to arousal in lab animals. when this part is stimulated the animal is awake when it is severed cut the animal goes into coma
Answer:
Its called PSY
Explanation: I so do not know why they named it this way but, hope i helped.
Tech A says that as engines gain miles, the spark plug gap increases, which raises the ignition system’s available voltage. Tech B says that misfire occurs when required voltage is higher than available voltage. Who is correct? Group of answer choices
Answer: Tech A is correct
Explanation:
Every vehicle has ignition system and without this system,it will not work. The battery of everything vehicle contain energy that start the vehicle and ignore it to start working. Electrical current move from the vehicle's battery and get to the induction coil, the induction coil increases the voltage in it so that the plug will be ignited. The spark plugs produce fire. The spark plug is connected to the ignition system. Once voltage is produced from the induction coil, electrical impulses move from induction coil to insulated plug wires. The spark plug need a very high voltage from the small voltage battery. Once the high voltage exceed the dielectric strength of the gases, spark jump the gap between the plug's fire end.
An electron and a positron collide head on, annihilate, and create two 0.804 MeV photons traveling in opposite directions. What was the initial kinetic energy of an electron? What was the initial kinetic energy of a positron?
Answer:
Ke- = Ke+ = 0.294MeV
Explanation:
To fins the kinetic energy of both electron and positron you use the following formula, for the case of annihilation of one electron an positron:
2[tex]E_p=2E_o+K_{e^-}+K_{e^+}[/tex] (1)
Ep: photon energy = 0.804MeV
Eo: rest energy of one electron (and positron) = 0.51MeV
Ke-: kinetic energy of electron
Ke+: kinetic energy of positron
You replace the values of Ep and Eo in the equation (1):
[tex]K_{e^-}+K_{e^+}=2E_p-2E_o=2(0.804MeV-0.51MeV)=0.588MeV[/tex]
Iy you assume both positron and electron have the same speed, then, the kinetic energy of them are equal, and the kinetic energy of each one is:
[tex]K_{e^-}=K_{e^+}=\frac{0.588MeV}{2}=0.294MeV[/tex]
